Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Absorption”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

Nanoparticle-enhanced absorptivity of copper during laser powder bed fusion

We report laser powder bed fusion (LPBF) of pure copper for thermal and electrical applications is hampered by its low near-infrared absorptivity and high thermal diffusivity. These material properties make it very difficult to localize the thermal energy needed to produce high density 3D printed parts. Modification of metal powders via nanoparticle additives is a promising approach to increasing absorptivity, but the effect of nanoparticles on absorptivity and melting behavior during LPBF is not well understood. In this study, we developed an in situ calorimetry system to measure effective absorptivity during LPBF on copper substrates. We decorated copper substrates using three nanoparticle systems (CuS, TiB 2 , multilayer graphene flakes) and demonstrated an enhanced absorptivity of the decorated substrates relative to pure copper. Graphene nanoflakes resulted in the highest improved absorption relative to pure copper from 0.09 to 0.48, due to their stability at high laser scanning powers. A thermomechanical model with convective heat transfer provided confidence in the measurements by reproducing the experimental melt pool traces. Full 3D cylindrical prints demonstrated an improvement in relative density of the copper-graphene powder prints (in the range of 0.930–0.992), relative to that of as-purchased copper powder prints (in the range of 0.854–0.972). This work provides a fundamental study of nanoparticle-enabled LPBF of highly reflective metals and demonstrates a viable route for expanding the library of reliably printable metals.

36 MATERIALS SCIENCE↗

Machine Learning Models for Binary Molecular Classification using VUV Absorption Spectra

Machine learning methods were combined with differential absorption spectroscopy measurements in the vacuum-ultraviolet region (5.167 – 9.920 eV) in order to develop predictive capabilities for inferring molecular structure from the spectra. Several types of species were analyzed and, for modeling purposes, were defined using a single classification: (1) alkane, (2) conjugation with oxygen (e.g. diacetyl, ethyl vinyl ether), (3) non-conjugated alkene (e.g. 1-butene, 1,4-cyclohexadiene), (4) oxygen-containing (e.g. 1-butanol, tetrahydrofuran), or (5) cyclic (e.g. cyclopentane, cyclohexanone). The latter molecular classification excluded cyclic ethers. Several modeling methods were employed in the analysis of 102 absorption spectra, 24 of which were measured for the first time. The primary objective was to identify suitable methods that enable accurate predictions of molecular structure classifications with minimized statistical uncertainties. Rather than identifying a single, unifying method to reliably predict molecular structure contributions to VUV absorption spectra, coordination is required among a particular method, the type of molecular structure detail (e.g. conjugation), and absorption region of interest. The latter is accomplished using a binning approach, wherein absorption regions of ~0.5 eV were utilized rather than the entire ~4.8 eV range. Photon energy binning enabled analysis of region-specific predictions of accuracy, precision, and recall. The outcome from the binning approach is that, rather than utilizing the entire spectrum, optimal determination of molecular structure using machine learning methods depends on the absorption region. Furthermore, the present work provides separate machine learning models for each molecular classification, which enables the identification of multi-functional species relevant to atmospheric chemistry and combustion chemistry, where isomer-resolved speciation is critical to understanding complex reaction networks.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

White light generation via sequential stepwise absorption and energy-transfer frequency upconversion in Tm{sup 3+}/Er{sup 3+}-codoped glass

White light emission with CIE-1931 coordinates close to the standard equal-energy white light illuminant, and color temperature in the 4000–6500 K range was produced in Tm{sup 3+}/Er{sup 3+}-codoped glasses through frequency upconversion. Multi-Stokes Raman emissions generated in an optical fiber pumped at 1.064 µm were used, seeking out the {sup 3}H{sub 5} thulium absorption band around 1.2 µm as the departure point. The new and efficient excitation approach allowed the generation of near infrared (800 nm), red (650 nm), and blue (480 nm) emission due to frequency upconversion excited via ground-state absorption and excited-state absorption in Tm{sup 3+} ions. Energy-transfer followed by excited-state absorption in Er{sup 3+} ions, provided the generation of the green (530, 550 nm) and red (660 nm) components to compose white light. The excitation mechanism for the Tm{sup 3+} ions is assigned to stepwise multi-wavelength excitation using Stokes Raman emission in an optical fiber, followed by stepwise excited-state absorption of the pump photons. Energy-transfer Tm{sup 3+}[{sup 3}F{sub 4}] + Er{sup 3+}[{sup 4}I{sub 15/2}] →Tm{sup 3+}[{sup 3}H{sub 6}] + Er{sup 3+}[{sup 4}I{sub 9/2}] followed by excited-state absorption of multi-Stokes Raman emissions populate erbium visible emitting level. Excitation power color tuneability of the overall light emission was also achieved. - Graphical abstract: Recorded emission spectrua of visible radiation emanating from the single-doped (Er3+, Tm3+) and codoped (Er3+/Tm3+) samples excited 160 mW average power from the fiber output. Simplified energy-level diagram of the excitation and upconversion emission processes for the Tm3+/Er3+-codoped sample excited using multi-Stokes emissions. Display Omitted.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Microwave absorption behavior and electromagnetic properties of Ni-Zr doped La-Sr hexagonal ferrite synthesized by auto-combustion method

Highlights: • Quantitative analysis of Microwave Absorption for synthesized ferrites. • Maximum absorption was successfully predicted from quarter-wavelength method. • Minimum RL = −25.07 dB with 1.25 GHz bandwidth for composition x = 0.75. • Better gross loss tangent and Microwave Absorption in Ku-band. • Synthesized ferrites can be used as thin or thick sheet of microwave absorber. - Abstract: Strontium hexagonal ferrites with compositional formula Sr{sub 0.85}La{sub 0.15}(NiZr){sub x}Fe{sub 12-2x}O{sub 19}, where ‘x’ varies from 0.00 to 1.00 in steps of 0.25, were synthesized by auto-combustion method. Structural, magnetic, electromagnetic and microwave absorption properties of synthesized ferrites were studied. The vector network analyzer (VNA) was used to measure complex permittivity (ε′–jε′′) and complex permeability (μ′–jμ′′) in X-band (8–12.4 GHz) and Ku-band (12.4–18 GHz) frequency range. The minimum reflection loss curves were obtained using back metal plate method for analyzing absorption properties of the material. All the synthesized ferrites show maximum absorption in Ku-band for sample thickness in the range of 1.6–1.68 mm. These newly synthesized ferrites have great potential to be used as thin microwave absorber sheets with minimum reflection loss values in the range of –19.69 dB to −27.8 dB and bandwidth in the range of 680 MHz–1.25 GHz.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Insight into the Chemistry of PETN Under Shock Compression Through Ultrafast Broadband Mid-Infrared Absorption Spectroscopy

In this study, thin films of pentaerythritol tetranitrate (PETN) were shock compressed using the laser driven shock apparatus at Los Alamos National Laboratory (LANL). Two spectroscopic probes were available to this apparatus: visible white light transient absorption spectroscopy (VIS) from 400 to 700 nm and mid-infrared transient absorption spectroscopy (MIR) from 1150 to 3800 cm –1 . Important PETN vibrational modes are the symmetric and antisymmetric NO 2 stretches at 1280 and 1650 cm –1 , respectively, as well as CH stretches at ~2900 cm –1 . Shock strength was varied from approximately 3 to 55 GPa to span from the chemically unreactive regime to the regime in which fast chemical reaction took place on the 250 ps time scale of the measurements. VIS and MIR results suggest irreversible chemistry was induced in PETN at pressures above 30 GPa. At lower shock pressures, the spectroscopy showed minimal changes attributable to pressure induced effects. Under the higher-pressure reactive conditions, the frequency region at the antisymmetric NO 2 stretch mode had a significantly increased absorption while the region around the symmetric NO 2 stretch did not. No observable increased absorption occurred in the higher frequency regions where CH-, NH-, and OH- bond absorptions would be observed. A broad absorption appeared on the shoulder at the red-edge of the CO 2 vibrational band around 2200 cm –1 . In addition to the experiments, reactive molecular dynamics were carried out under equivalent shock conditions to correlate the evolution of the infrared spectrum to molecular processes. The simulations show results consistent to experiments up to 30 GPa but suggest that NO and NO 2 related features provided the strongest contributions to the shocked infrared changes. Proposed mechanisms for shocked PETN chemistry are analyzed as consistent or inconsistent with the data presented here. Our experimental data suggests C≡O or N 2 O bond formation, nitrite formation, and absence of significant hydroxyl or amine concentrations in the initial chemistry steps in PETN shocked above 30 GPa.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synergy in Two-Frequency Fast Wave Cyclotron Harmonic Absorption in DIII-D

Fast waves (FWs) at 60 MHz and at 90 MHz are coupled to DIII-D discharges for central heating and current drive at net FW power up to 3.5 MW. The primary absorption mechanism is intended to be direct electron damping in the plasma core. In discharges at B = 2 T with fast deuteron populations from neutral beam injection, 4th and 6th deuterium cyclotron harmonic absorption on the fast ions competes with direct electron damping. Previous experiments have shown that the 6{omega}{sub D} absorption of the 90 MHz FWs is weaker than the 4{omega}{sub D} absorption of 60 MHz FWs, in agreement with a model that includes unspecified edge losses. Recent experiments have shown that if the fast deuterons are accelerated by absorption of 60 MHz (4{omega}{sub D}) FWs, adding 90 MHz power (6{omega}{sub D}) can increase the fusion neutron rate by a larger increment than is obtained with 90 MHz power alone. Details of this synergy between 4{omega}{sub D} and 6{omega}{sub D} absorption are presented.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Enhancement of optical absorption by modulation of the oxygen flow of TiO{sub 2} films deposited by reactive sputtering

Oxygen-deficient TiO{sub 2} films with enhanced visible and near-infrared optical absorption have been deposited by reactive sputtering using a planar diode radio frequency magnetron configuration. It is observed that the increase in the absorption coefficient is more effective when the O{sub 2} gas supply is periodically interrupted rather than by a decrease of the partial O{sub 2} gas pressure in the deposition plasma. The optical absorption coefficient at 1.5 eV increases from about 1 Multiplication-Sign 10{sup 2} cm{sup -1} to more than 4 Multiplication-Sign 10{sup 3} cm{sup -1} as a result of the gas flow discontinuity. A red-shift of {approx}0.24 eV in the optical absorption edge is also observed. High resolution transmission electron microscopy with composition analysis shows that the films present a dense columnar morphology, with estimated mean column width of 40 nm. Moreover, the interruptions of the O{sub 2} gas flow do not produce detectable variations in the film composition along its growing direction. X-ray diffraction and micro-Raman experiments indicate the presence of the TiO{sub 2} anatase, rutile, and brookite phases. The anatase phase is dominant, with a slight increment of the rutile and brookite phases in films deposited under discontinued O{sub 2} gas flow. The increase of optical absorption in the visible and near-infrared regions has been attributed to a high density of defects in the TiO{sub 2} films, which is consistent with density functional theory calculations that place oxygen-related vacancy states in the upper third of the optical bandgap. The electronic structure calculation results, along with the adopted deposition method and experimental data, have been used to propose a mechanism to explain the formation of the observed oxygen-related defects in TiO{sub 2} thin films. The observed increase in sub-bandgap absorption and the modeling of the corresponding changes in the electronic structure are potentially useful concerning the optimization of efficiency of the photocatalytic activity and the magnetic doping of TiO{sub 2} films.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Study of spontaneous and induced absorption in amorphous Ta{sub 2}O{sub 5} and SiO{sub 2} dielectric thin films

Tantalum pentoxide (Ta{sub 2}O{sub 5}) and silicon dioxide (SiO{sub 2}) are common high-index and low-index materials used in dielectric optical coatings for high average-power lasers since high-density sputtered oxide films with absorption losses at near- and mid-infrared wavelengths of less than 1 ppm can be obtained. These oxides have been chosen to investigate the spontaneous and optically induced absorption at {lambda}{sub 0} = 1064 nm that occurs due to simultaneous illumination at shorter wavelengths. The effect is measured using the photothermal common-path interferometric technique. This technique is capable of detecting sub-ppm levels of optical absorption and tracking its changes at a given wavelength when a second laser beam is also incident on a thin film oxide sample. In this work, dual beam experiments are employed to assess changes in the optical absorption at {lambda}{sub 0} = 1064 nm in ion beam sputtered Ta{sub 2}O{sub 5} and SiO{sub 2} thin films deposited on fused silica substrates, with stimulating illumination {lambda}{sub 1} ranging from {lambda}{sub 1} = 266 nm to {lambda}{sub 1} = 780 nm. The power and wavelength of the stimulating radiation were found to affect the optical absorption at {lambda}{sub 0} = 1064 nm. Furthermore, the relaxation dynamics of the induced infrared absorption was found to be wavelength dependent and is thought to be associated with various electron traps existing in the forbidden gap that depend essentially on the film's preparation conditions. The significantly greater effect observed in Ta{sub 2}O{sub 5} at {lambda}{sub 1} = 266 nm is attributed to band-to-band transitions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Dynamics of femtosecond laser absorption of fused silica in the ablation regime

We investigate the ultrafast absorption dynamics of fused silica irradiated by a single 500 fs laser pulse in the context of micromachining applications. A 60-fs-resolution pump-probe experiment that measures the reflectivity and transmissivity of the target under excitation is developed to reveal the evolution of plasma absorption. Above the ablation threshold, an overcritical plasma with highly non-equilibrium conditions is evidenced in a thin layer at the surface. The maximum electron density is reached at a delay of 0.5 ps after the peak of the pump pulse, which is a strong indication of the occurrence of electronic avalanche. The results are further analyzed to determine the actual feedback of the evolution of the optical properties of the material on the pump pulse. We introduce an important new quantity, namely, the duration of absorption of the laser by the created plasma, corresponding to the actual timespan of laser absorption by inverse Bremsstrahlung. Our results indicate an increasing contribution of plasma absorption to the total material absorption upon raising the excitation fluence above the ablation threshold. The role of transient optical properties during the energy deposition stage is characterized and our results emphasize the necessity to take it into account for better understanding and control of femtosecond laser-dielectrics interaction.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Near-infrared free carrier absorption in heavily doped silicon

Free carrier absorption in heavily doped silicon can have a significant impact on devices operating in the infrared. In the near infrared, the free carrier absorption process can compete with band to band absorption processes, thereby reducing the number of available photons to optoelectronic devices such as solar cells. In this work, we fabricate 18 heavily doped regions by phosphorus and boron diffusion into planar polished silicon wafers; the simple sample structure facilitates accurate and precise measurement of the free carrier absorptance. We measure and model reflectance and transmittance dispersion to arrive at a parameterisation for the free carrier absorption coefficient that applies in the wavelength range between 1000 and 1500 nm, and the range of dopant densities between ∼10{sup 18} and 3 × 10{sup 20} cm{sup −3}. Our measurements indicate that previously published parameterisations underestimate the free carrier absorptance in phosphorus diffusions. On the other hand, published parameterisations are generally consistent with our measurements and model for boron diffusions. Our new model is the first to be assigned uncertainty and is well-suited to routine device analysis.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Multi-spectral optical absorption in substrate-free nanowire arrays

A method is presented of fabricating gallium arsenide (GaAs) nanowire arrays of controlled diameter and period by reactive ion etching of a GaAs substrate containing an indium gallium arsenide (InGaP) etch stop layer, allowing the precise nanowire length to be controlled. The substrate is subsequently removed by selective etching, using the same InGaP etch stop layer, to create a substrate-free GaAs nanowire array. The optical absorptance of the nanowire array was then directly measured without absorption from a substrate. We directly observe absorptance spectra that can be tuned by the nanowire diameter, as explained with rigorous coupled wave analysis. These results illustrate strong optical absorption suitable for nanowire-based solar cells and multi-spectral absorption for wavelength discriminating photodetectors. The solar-weighted absorptance above the bandgap of GaAs was 94% for a nanowire surface coverage of only 15%.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Absorption properties of type-II InAs/InAsSb superlattices measured by spectroscopic ellipsometry

Strain-balanced InAs/InAsSb superlattices offer access to the mid- to long-wavelength infrared region with what is essentially a ternary material system at the GaSb lattice constant. The absorption coefficients of InAs/InAsSb superlattices grown by molecular beam epitaxy on (100)-oriented GaSb substrates are measured at room temperature over the 30 to 800 meV photon energy range using spectroscopic ellipsometry, and the miniband structure of each superlattice is calculated using a Kronig-Penney model. The InAs/InAsSb conduction band offset is used as a fitting parameter to align the calculated superlattice ground state transition energy to the measured absorption onset at room temperature and to the photoluminescence peak energy at low temperature. It is observed that the ground state absorption coefficient and transition strength are proportional to the square of the wavefunction overlap and the ground state absorption coefficient approaches a maximum value of around 5780 cm{sup −1} as the wavefunction overlap approaches 100%. The absorption analysis of these samples indicates that the optical joint density of states is weakly dependent on the period thickness and Sb content of the superlattice, and that wavefunction overlap is the principal design parameter in terms of obtaining strong absorption in these structures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Geometrical dependence of spin current absorption into a ferromagnetic nanodot

We have investigated the absorption property of the diffusive pure spin current due to a ferromagnetic nanodot in a laterally configured ferromagnetic/nonmagnetic hybrid nanostructure. The spin absorption in a nano-pillar-based lateral-spin-valve structure was confirmed to increase with increasing the lateral dimension of the ferromagnetic dot. However, the absorption efficiency was smaller than that in a conventional lateral spin valve based on nanowire junctions because the large effective cross section of the two dimensional nonmagnetic film reduces the spin absorption selectivity. We also found that the absorption efficiency of the spin current is significantly enhanced by using a thick ferromagnetic nanodot. This can be understood by taking into account the spin absorption through the side surface of the ferromagnetic dot quantitatively.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Nonlinear absorption of femtosecond laser pulses (800 nm) by atmospheric air and water vapour

Quantitative data on the nonlinear absorption cross sections of femtosecond Ti : Sapphire laser pulses in air and water vapour have been obtained. A photoacoustic spectrometer calibrated based on the calculated value of linear absorption of laser pulses with a wavelength of 800 nm and a spectral width of 17.7 nm is used to find the nonlinear absorption cross sections of water vapour and air: {sigma}{sub 2}{sup w} = (2.6{+-}0.4) Multiplication-Sign 10{sup -55} cm{sup 4} s and {sigma}{sub 2}{sup a} = (8.7{+-}1.0) Multiplication-Sign 10{sup -56} cm{sup 4} s, respectively. Based on measuring the absorption of femtosecond Ti : Sapphire laser pulses with a photoacoustic detector calibrated with the known linear absorption of ruby laser radiation by water vapour in air, the air nonlinear absorption cross section is found to be (8.2{+-}0.9) Multiplication-Sign 10{sup -56} cm{sup 4} s.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Simulation of carbon dioxide absorption by amino acids in two-phase batch and bubble column reactors

The absorption of carbon dioxide (CO 2 ) is a critical process in many practical applications. The use of amino acid solutions as absorption solvents has the potential to reduce the amount of energy required by the regeneration process. The goal of this research project is to develop dynamic models to simulate CO 2 absorption by using amino acid solutions as absorption solvents. A reaction scheme is introduced to represent the chemical reactions between the amino acid and CO 2 . Two reaction models, for a two-phase batch reactor and a bubble column, based upon transient mass and energy balances for the chemical species found in CO 2 gas-liquid absorption are presented. Computer codes have been written to implement the proposed models. Simulation results are presented and discussed. The proposed models can be used to optimize and control CO 2 absorption in practical applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ca II AND Na I QUASAR ABSORPTION-LINE SYSTEMS IN AN EMISSION-SELECTED SAMPLE OF SDSS DR7 GALAXY/QUASAR PROJECTIONS. I. SAMPLE SELECTION

The aim of this project is to identify low-redshift host galaxies of quasar absorption-line systems by selecting galaxies that are seen in projection onto quasar sightlines. To this end, we use the Seventh Data Release of the Sloan Digital Sky Survey to construct a parent sample of 97,489 galaxy/quasar projections at impact parameters of up to 100 kpc to the foreground galaxy. We then search the quasar spectra for absorption-line systems of Ca II and Na I within {+-}500 km s{sup -1} of the galaxy's velocity. This yields 92 Ca II and 16 Na I absorption systems. We find that most of the Ca II and Na I systems are sightlines through the Galactic disk, through high-velocity cloud complexes in our halo, or Virgo Cluster sightlines. Placing constraints on the absorption line rest equivalent width significance ({>=}3.0{sigma}), the local standard of rest velocity along the sightline ({>=}345 km s{sup -1}), and the ratio of the impact parameter to the galaxy optical radius ({<=}5.0), we identify four absorption-line systems that are associated with low-redshift galaxies at high confidence, consisting of two Ca II systems (one of which also shows Na I) and two Na I systems. These four systems arise in blue, {approx}L*{sub r} galaxies. Tables of the 108 absorption systems are provided to facilitate future follow-up.

79 ASTRONOMY AND ASTROPHYSICS↗

ABSORPTION OF p MODES BY THIN MAGNETIC FLUX TUBES

We study the interaction between p modes and the many magnetic fibrils that lace the solar convection zone. In particular, we investigate the resulting absorption of p-mode energy by the fibril magnetic field. Through mechanical buffeting, the p modes excite tube waves on the magnetic fibrils-in the form of longitudinal sausage waves and transverse kink waves. The tube waves propagate up and down the magnetic fibrils and out of the p-mode cavity, thereby removing energy from the incident acoustic waves. We compute the absorption coefficient associated with this damping mechanism and model the absorption that would be observed for magnetic plage. We compare our results to the absorption coefficient that is measured using the local-helioseismic technique of ridge-filtered holography. We find that, depending on the mode order and the photospheric boundary conditions, we can achieve absorption coefficients for simulated plage that exceed 50%. The observed increase of the absorption coefficient as a function of frequency is reproduced for all model parameters.

99 GENERAL AND MISCELLANEOUS↗

H I 21 cm ABSORPTION AND UNIFIED SCHEMES OF ACTIVE GALACTIC NUCLEI

In a recent study of z >= 0.1 active galactic nuclei (AGNs), we found that 21 cm absorption has never been detected in objects in which the ultraviolet luminosity exceeds L{sub UV} {approx} 10{sup 23} W Hz{sup -1}. In this paper, we further explore the implications that this has for the currently popular consensus that it is the orientation of the circumnuclear obscuring torus, invoked by unified schemes of AGNs, which determines whether absorption is present along our sight line. The fact that at L{sub UV} {approx}< 10{sup 23} W Hz{sup -1}, both type-1 and type-2 objects exhibit a 50% probability of detection, suggests that this is not the case and that the bias against detection of H I absorption in type-1 objects is due purely to the inclusion of the L{sub UV} {approx}> 10{sup 23} W Hz{sup -1} sources. Similarly, the ultraviolet luminosities can also explain why the presence of 21 cm absorption shows a preference for radio galaxies over quasars and the higher detection rate in compact sources, such as compact steep spectrum or gigahertz peaked spectrum sources, may also be biased by the inclusion of high-luminosity sources. Being comprised of all 21 cm searched sources at z >= 0.1, this is a necessarily heterogeneous sample, the constituents of which have been observed by various instruments. By this same token, however, the dependence on the UV luminosity may be an all encompassing effect, superseding the unified schemes model, although there is the possibility that the exclusive 21 cm non-detections at high UV luminosities could be caused by a bias toward gas-poor ellipticals. Additionally, the high UV fluxes could be sufficiently exciting/ionizing the H I above 21 cm detection thresholds, although the extent to which this is related to the neutral gas deficit in ellipticals is currently unclear. Examining the moderate UV luminosity (L{sub UV} {approx}< 10{sup 23} W Hz{sup -1}) sample further, from the profile widths and offsets from the systemic velocities, we find no discernible differences between the two AGN types. This may suggest that the bulk of the absorption generally occurs in the galactic disk, which must therefore be randomly orientated with respect to the circumnuclear torus. Furthermore, we see no difference in the reddening between the two AGN types, indicating, like the 21 cm absorption, that the orientation of the torus has little bearing on this. We also find a correlation between 21 cm line strength and the optical-near-infrared color, which suggests that the reddening is caused by dust located in the large-scale, H I absorbing disk which intervenes the sight line to the AGN.

79 ASTRONOMY AND ASTROPHYSICS↗