Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “APT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

Cloud height differences on Saturn

Spectrophotometry from 0.6-2.5 micron at 1.5% spectral resolution of Saturn's equator and visibly dark South Equatorial Belt near a 1980 ring-plane crossing shows substantially less absorption by methane over the equator than over the SEB. Model fits using Appleby's model atmosphere and a multiple scattering model lead to the conclusion that the pressure levels of the clouds in the two regions differ by 20%. The region of high clouds is coincident with the location of the equatorial fast jet observed by Voyager.

Apt, J.↗

Speckle imaging for planetary research

The present study of speckle imaging technique effectiveness encompasses image reconstruction by means of a division algorithm for Fourier amplitudes, and the Knox-Thompson (1974) algorithm for Fourier phases. Results which have been obtained for Io, Titan, Pallas, Jupiter and Uranus indicate that spatial resolutions lower than the seeing limit by a factor of four are obtainable for objects brighter than Uranus. The resolutions obtained are well above the diffraction limit, due to inadequacies of the video camera employed. A photon-counting camera has been developed to overcome these difficulties, making possible the diffraction-limited resolution of objects as faint as Charon.

Nisenson, P.↗

Near-infrared linear array spectrometer for space applications

A 128-element InSb linear detector array read out with a field effect transistor (FET) multiplexing scheme has been developed at the Jet Propulsion Laboratory. State-of-the-art NEP, uniform response, on-detector charge integration, and very low focal plane heat load compared to that of discrete detector arrays allows this type of array to open new possibilities for spaceborne near-infrared imaging spectrometers. Large number of cooled detector elements are feasible with the new technology, making it practical to design sensitive spectrometers even for spinning spacecraft where simultaneous wavelength coverage is necessary to avoid confusion of spatial with spectral variations.

Apt, J.↗

Methane on Triton and Pluto - New CCD spectra

Spectra of Triton and of Pluto from 4553-9558 A at 25 A resolution are presented. Both spectra show the methane absorption near 8900 A; its equivalent width was 16 times greater on Pluto than on Triton at the time of the observations. This is the first published observation of the 8900 A feature in Triton's spectrum. The previously reported 27 m-amagat abundance of the Pluto atmosphere ignored contributions due to methane ice and should therefore be regarded as an upper limit. The observations of the Pluto spectrum discussed here show sharp structure in the 8900 and 8600 A bands; the case for an atmosphere on Pluto may turn on whether new laboratory measurements show that such structure is present in methane ice.

Apt, J.↗

Methane on Triton - Physical state and distribution

Infrared spectrophotometric measurements of Neptune's satellite Triton obtained between 1980 and 1982 in the spectral range 0.8-2.5 microns show six individual absorption bands attributable to methane. An additional band in the Triton data is not methane. The Triton spectral data conform more closely to a laboratory spectrum of frozen methane than to a synthetic spectrum of methane gas computed for conditions of low temperature expected at the satellite. Additionally, the strength of the bands vary with Triton's orbital position. The data thus suggest that methane in the ice phase is mostly responsible for the bands in Triton's spectrum, and that the ice is distributed nonuniformly around the satellite's surface.

Cruikshank, D. P.↗

Angular Resolution of an EAS Array for Gamma Ray Astronomy at Energies Greater Than 5 x 10 (13) Ev

A 24 detector extensive air shower array is being operated at Ootacamund (2300 m altitude, 11.4 deg N latitude) in southern India for a study of arrival directions of showers of energies greater than 5 x 10 to the 13th power eV. Various configurations of the array of detectors have been used to estimate the accuracy in determination of arrival angle of showers with such an array. These studies show that it is possible to achieve an angular resolution of better than 2 deg with the Ooty array for search for point sources of Cosmic gamma rays at energies above 5 x 10 to the 13th power eV.

Apte, A. R.↗

Bolometric albedos of Titan, Uranus, and Neptune

The energy budgets of Titan, Uranus, and Neptune are reevaluated using new observational data on energy input as well as unpublished data on energy output. The bolometric geometric albedo of each object was determined, and preliminary determinations of the phase functions were used to compute the Bond albedos and effective temperatures. The values for the latter are 83 + or - 2 K for Titan, 57 + or - 2 K for Uranus, and 47 + or - 2 K for Neptune. The effective temperature of Titan is greater than the observed brightness temperatures in the thermal infrared region of the spectrum, indicating that the emissivity is less than unity for this part of the spectrum. An internal luminosity of (3.9 + or 1.1) x 10 to the 15th W is found for Neptune, and an upper limit of (0.6 + or - 1.4) x 10 to the 15th W is found for Uranus.

Neff, J. S.↗

Effect of Nb2O5 and V2O5 addition on the superconducting properties of YBa2Cu3O(y) thin films

The effect of Nb2O5 and V2O5 addition on the superconducting properties and microstructure of YBa2Cu3O(y) has been studied in thin films. Polycrystalline targets for laser ablation were prepared by mixing high purity V2O5 or Nb2O5 powders with a well characterized YBa2Cu3O(y) powder in the range 0 to 4 wt percent by solid state reaction method. Thin films (approximately 1500 A thickness) of the above targets were grown on (100) SrTiO3 (STO) and (100) LaAlO3 (LAO) substrates at 700 C temperature by pulsed laser deposition (PLD) technique. In the case of Nb2O5 addition we have noticed an increase in J(sub c) up to 0.5 wt percent and higher additive concentration (greater than 0.5 wt percent) have degraded the superconducting properties. However, in the case of V2O3 addition, there is an improvement in current density and microstructural properties up to 1 wt percent and the superconducting properties degrade for concentrations greater than 1 wt percent. The best J(sub c) for 0.5 wt percent of Nb2O5 added YBCO thin film is 1.6 x 10(exp 6) A/sq cm and for that of V2O5 added sample is 3.4 x 10(exp 6) A/sq cm at 77 K as compared to the pure YBa2Cu3O(y) (YBCO) film J(sub c) (1.2 x 10(exp 6) A/sq cm) observed on STO substrates. The reason for improvement in J(sub c) and microstructural properties in the case of V2O5 addition could be due to the low melting of V2O5 (690 C) which can act as a very good surfactant during deposition. Over all, we have realized that Nb2O5 addition or V2O5 addition to YBCO have shown significant improvement over the undoped YBa2Cu3O(7-x) films grown under identical conditions.

Srinivas, S.↗

A study of the superconducting properties of YBa2Cu(9-x)Nb(x)O(y) thin films

Effect of Niobium substitution at the copper site in YBa2Cu3O(7-x) was studied in thin film form. The films were deposited by laser ablation technique using the targets of the YBa2Cu(3-x)Nb(x)O(y) where x = 0.0, 0.025, 0.05, 0.1, 0.2, 0.4, 0.8 and 1.0 under identical deposition conditions on SrTiO3 (100) substrates. Films were characterized by XRD, resistivity, I-V and J(sub c) measurements. Films made from x = 0.025 and 0.05 concentrations of Nb substituted targets showed relatively improved superconducting properties compared to that of undoped films. the best J(sub c) realized for x - 0.025 Nb concentration was 1.8 x 10(exp 6) A/sq cm and for 0.05 Nb concentration it was 3.2 x 10(exp 6) A/sq cm at 77 K. However, degradation of the superconducting properties, with the increase of x is greater than or equal to 0.1 Nb concentration and drastic suppression and complete loss of superconductivity was noticed for x is greater than or equal to 0.4. The growth of impurity phase YBa2NbO6 for x = 0.1 and above of Nb concentration was noted from XRD (X-Ray Diffraction) patterns. However, the site occupancy of Nb could not be confirmed from these studies.

Srinivas, S.↗

Growth and micro structural studies on Yittria Stabilized Zirconia (YSZ) and Strontium Titanate (STO) buffer layers

Microstructure of Yittria Stabilized Zirconia (YSZ) and Strontium Titanate (STO) of radio frequency magnetron sputtered buffer layers was studied at various sputtering conditions on Si (100), Sapphire and LaAlO3 (100) substrates. The effect of substrate temperatures up to 800 C and sputtering gas pressures in the range of 50 mTorr. of growth conditions was studied. The buffer layers of YSZ and STO showed a strong tendency for columnar growth was observed above 15 mTorr sputtering gas pressure and at high substrate temperatures. Post annealing of these films in oxygen atmosphere reduced the oxygen deficiency and strain generated during growth of the films. Strong c-axis oriented superconducting YBa2Cu3O7-x (YBCO) thin films were obtained on these buffer layers using pulsed laser ablation technique. YBCO films deposited on multilayers of YSZ and STO were shown to have better superconducting properties.

Srinivas, S.↗

Unstructured LES of Reacting Multiphase Flows in Realistic Gas Turbine Combustors

As part of the Accelerated Strategic Computing Initiative (ASCI) program, an accurate and robust simulation tool is being developed to perform high-fidelity LES studies of multiphase, multiscale turbulent reacting flows in aircraft gas turbine combustor configurations using hybrid unstructured grids. In the combustor, pressurized gas from the upstream compressor is reacted with atomized liquid fuel to produce the combustion products that drive the downstream turbine. The Large Eddy Simulation (LES) approach is used to simulate the combustor because of its demonstrated superiority over RANS in predicting turbulent mixing, which is central to combustion. This paper summarizes the accomplishments of the combustor group over the past year, concentrating mainly on the two major milestones achieved this year: 1) Large scale simulation: A major rewrite and redesign of the flagship unstructured LES code has allowed the group to perform large eddy simulations of the complete combustor geometry (all 18 injectors) with over 100 million control volumes; 2) Multi-physics simulation in complex geometry: The first multi-physics simulations including fuel spray breakup, coalescence, evaporation, and combustion are now being performed in a single periodic sector (1/18th) of an actual Pratt & Whitney combustor geometry.

Ham, Frank↗

VEGF165 Stimulates Vessel Density and Vessel Diameter Differently in Angiogenesis and Lymphangiogenesis

Vascular endothelial growth factor-165 (VEGF(sub 165)) stimulated angiogenesis in the quail chorioallantoic membrane (CAM) by vessel expansion from the capillary network. However, lymphangiogenesis was stimulated by the filopodial guidance of tip cells located on blind-ended lymphatic sprouts. As quantified by fractal/generational branching analysis using the computer code VESGEN, vascular density increased maximally at low VEGF concentrations, and vascular diameter increased most at high VEGF concentrations. Increased vascular density and diameter were statistically independent events (r(sub s), -0.06). By fluorescence immunohistochemistry of VEGF receptors VEGFR-1 and VEGFR-2, alpha smooth muscle actin ((alpha) SMA) and a vascular/lymphatic marker, VEGF(sub 165) increased the density and diameter of sprouting lymphatic vessels guided by tip cells (accompanied by the dissociation of lymphatics from blood vessels). Isolated migratory cells expressing (alpha)SMA were recruited to blood vessels, whereas isolated cells expressing VEGFR-2 were recruited primarily to lymphatics. In conclusion, VEGF(sub 165) increased lymphatic vessel density by lymphatic sprouting, but increased blood vessel density by vascular expansion from the capillary network.

Parsons-Wingerter, Patricia↗

Global Estimates and Long-Term Trends of Fine Particulate Matter Concentrations (1998-2018)

Exposure to outdoor fine particulate matter (PM2.5) is a leading risk factor for mortality. We develop global estimates of annual PM2.5 concentrations and trends for 1998–2018 using advances in satellite observations, chemical transport modeling, and ground-based monitoring. Aerosol optical depths (AODs) from advanced satellite products including finer resolution, increased global coverage, and improved long-term stability are combined and related to surface PM2.5 concentrations using geophysical relationships between surface PM2.5 and AOD simulated by the GEOS-Chem chemical transport model with updated algorithms. The resultant annual mean geophysical PM2.5 estimates are highly consistent with globally distributed ground monitors (R2 = 0.81; slope = 0.90). Geographically weighted regression is applied to the geophysical PM2.5 estimates to predict and account for the residual bias with PM2.5 monitors, yielding even higher cross validated agreement (R2 = 0.90–0.92; slope = 0.90–0.97) with ground monitors and improved agreement compared to all earlier global estimates. The consistent long-term satellite AOD and simulation enable trend assessment over a 21 year period, identifying significant trends for eastern North America (−0.28 ± 0.03 μg/m3/yr), Europe (−0.15 ± 0.03 μg/m3/yr), India (1.13 ± 0.15 μg/m3/yr), and globally (0.04 ± 0.02 μg/m3/yr). The positive trend (2.44 ± 0.44 μg/m3/yr) for India over 2005–2013 and the negative trend (−3.37 ± 0.38 μg/m3/yr) for China over 2011–2018 are remarkable, with implications for the health of billions of people.

Melanie S. Hammer↗

A Machine Learning Ready Dataset of Acoustic Power Maps for Detection of Active Region Emergence

The development of an accurate forecast for solar eruptive activity has become increasingly important in order to prevent any potential impact on activities in space and the Earth's environment. It is therefore crucial to detect active regions before they appear on the solar surface and create early warning capabilities for upcoming Space Weather disturbances. In this work, 9TB of solar data (SDO/HMI dopplergrams, magnetograms and continuum intensity maps) involving the emergence of 61 NOAA solar active regions since 2010 were processed using the NASA HECC capabilities. An acoustic power maps time-series dataset was created (for four different frequency ranges and processed to take into account the solar sphere geometric effect ) which can be used for understanding the dynamics of the solar surface and train a variety of ML models. The calculated acoustic power maps carry precursor information associated with the decrease in continuum intensity on the solar surface, verifying older helioseismology research. Our results show that a Long Short-Term Memory (LSTMs) model, with a modest layer depth and the right hyperparameters tuned, when trained on this solar acoustic power maps dataset can predict without false negatives a drop in intensity (associated with the emergence of the active region), up to 18 hours in advance.

SMD↗

Using Long-Short Term Memory Models to Predict Solar Active Regions Emergence

We train Long Short-Term Memory (LSTM) models that predict the formation of active regions (ARs), the main source of eruptive solar activity. Using the Doppler shift velocity, the continuum intensity and the magnetic field full-disk maps from SDO/HMI we have created time-series datasets of acoustic power and magnetic flux which are used to train Long Short-Term Memory (LSTM) models on predicting decreases in continuum intensity 12 hours in advance. Testing of the models' performance was done on data from 5 ARs, unseen from the model during training. The model predicted the emergence of AR11726, AR13165 and AR13179, 10, 29 and 5 hours in advance, and variations of this model achieved average RMSE values of 0.11 for both active and quiet parts of the solar disc, showing the ability of the model to capture acoustic power anomalies and predict continuum intensity variations. This work sets the foundations for the very first ML-aided prediction of solar ARs.

SMD↗