Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ALIGNMENT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

PACE OCI Short-Wave Infrared Detection Assembly Optical System Design, Alignment, and Environmental Test

The Ocean Color Instrument (OCI), which will be integrated with the Plankton, Aerosol, Cloud, ocean Ecosystem (PACE) satellite, will collect science data that will be used to monitor the health of Earth’s oceans and atmosphere. The Short-Wave Infrared (SWIR) Detection Assembly (SDA), built and characterized by Utah State University Space Dynamics Laboratory (SDL), is a subsystem of OCI consisting of 32 channels covering seven discrete optical bands of interest. A total of 16 SWIR Detection Subassemblies (SDSs) compose the SDA and house the cold optical system. The science data optical input for each SDS is supplied by a 0.22 NA multimode fiber interfacing with a fiber adapter. The diverging light from the fiber is collimated, split by a dichroic beamsplitter to two separate channels, filtered by the science filter, and then reimaged onto the single-element detectors with a final 0.76 NA. Aspheric, diamond-turned powered elements are used throughout the optical design. Fabrication and alignment tolerance analysis/budgets are balanced to ensure the optical system meets throughput requirements. All systems are aligned at ambient temperature using an InSb camera and an in-line illumination microscope system to directly image the active detector area through the science filters. Compensators used during alignment are detector focus and decenter, which are adjusted via photoetched shims in increments of 25 µm. Average focus and centering errors were less than 8 µm among all 32 flight and 10 flight spare detectors. Each SDS spectral response and conversion gain was verified at operational temperature of -65°C in vacuum.

OCI↗
NASA NTRS2024

CODEX Optical Design and Alignment

The COronal Diagnostic EXperiment (CODEX) is a Heliophysics mission to measure the density, temperature, and velocity of the electrons in the solar corona with the primary goal of improving our understanding of the physical conditions of the solar wind in the acceleration region. The temperature and velocity measurement requires much higher signal-to-noise ratio than the density measurements. In solar coronagraphs, the diffraction of the solar disk light due to the occulting element is the dominant source of noise. Therefore, to further suppress the diffracted sun light with respect to the existing coronagraphs is a critical element of the CODEX design. To minimize the stray light due to diffraction, the selected optical design is a two-stage standard coronagraph with an external occulter, an internal occulter, and a Lyot stop. What is unique for this design is that a focal mask was inserted at the telescope focal plane. It works together with the field lens suppressing the stray light down by ~ another order of magnitude as compared to a traditional three-stage approach. During the optical design, a Fourier Transform based beam propagation software, i.e., GLAD, was used to model the beam path through the full coronagraph, from the external occulter to the detector array. All diffraction sensitive elements: external occulter, internal occulter, focal mask, and Lyot stop were carefully modeled and optimized. As a result, the requirement of achieving a stray light level which is one order of magnitude lower than F-corona was satisfied. On the other hand, to achieve the final suppression, a precision optical alignment is another must. This paper also presents our creative alignment procedure: using the combination of metrology, precision alignment equipment, and real time diffraction ring monitoring to minimize the diffraction. The final test results show that the suppression ratio (B/B 0 ) reaches 10 -11 level, which is equivalent to one order of magnitude lower than F-corona.

CODEX optical design and alignment↗
DOE OSTI2015

On the field‐aligned electric field in the polar cap

Abstract The Johns Hopkins University Applied Physics Laboratory open‐field line particle precipitation model predicts downward field‐aligned electric field to maintain charge quasi‐neutrality. Previous studies confirmed the existence of such electric fields. However, the present study shows that upward field‐aligned electric field can be found within upward field‐aligned current (FAC) region. In the upward FAC region, upward electric field that accelerates electron downward is seen with the occurrence rates of 82%–96%. In contrast, the occurrence rates in the downward FAC regions are 3%–11%. Polar rain electrons located in the upward FAC region adjacent to closed field lines often show a ramping up of energy with increasing latitude before reaching a plateau. This plateau may be attributed to the magnetosheath electrons that progressively have higher antisunward velocity and lower density with increasing distance from the subsolar point before they asymptotically reach the solar wind values.

Wing, Simon↗
DOE OSTI2022

Surface‐Enforced Alignment of Reprogrammable Liquid Crystalline Elastomers

Abstract Liquid crystalline elastomers (LCEs) are stimuli‐responsive materials capable of undergoing large deformations. The thermomechanical response of LCEs is attributable to the coupling of polymer network properties and disruption of order between liquid crystalline mesogens. Complex deformations have been realized in LCEs by either programming the nematic director via surface‐enforced alignment or localized mechanical deformation in materials incorporating dynamic covalent chemistries. Here, the preparation of LCEs via thiol‐Michael addition reaction is reported that are amenable to surface‐enforced alignment. Afforded by the thiol‐Michael addition reaction, dynamic covalent bonds are uniquely incorporated in chemistries subject to surface‐enforce alignment. Accordingly, LCEs prepared with complex director profiles are able to be programmed and reprogrammed by (re)activating the dynamic covalent chemistry to realize distinctive shape transformations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Room-Temperature Phototransistor with Negative Photoresponsivity of 10 8 A W -1 Using Fullerene-Sensitized Aligned Carbon Nanotubes

Detection of low intensity light down to a few photons requires photodetectors with high gain. In this paper, a new photodetector is reported based on C 60 -sensitized aligned carbon nanotube (CNT) transistors with an extremely high responsivity of 10 8 A W -1 (gain > 10 8 ) in the ultraviolet and visible range, and 720 A W -1 (gain = 940) in the infrared range. In contrast to most sensitized phototransistors that operate on the photogating effect, the new photodetector operates on the modulation of the electrons scattering in the CNTs, leading to negative photoconductivity. Comparison with similar photodetectors using random CNT networks shows the benefit of using aligned CNTs. Finally, at room temperature, the aligned CNT photodetectors are demonstrated to detect a few tens of photons per CNT.

47 OTHER INSTRUMENTATION↗
DOE OSTI2019

Analytic analysis of load alignment for coning extreme‐scale rotors

Abstract Extreme‐scale wind turbines (rated powers greater than 10 MW) with large rotor diameters and conventional upwind designs must resist extreme downwind and gravity loads. This can lead to significant structural design challenges and high blade masses that can impede the reduction of levelized cost of wind energy. Herein, the theoretical basis for downwind load alignment is developed. This alignment can be addressed with active downwind coning to reduce/eliminate flapwise bending loads by balancing the transverse components of thrust, centrifugal, and gravitational force. Equations are developed herein that estimates the optimal coning angle that reduces flapwise loads by a specified amount. This analysis is then applied to a 13.2‐MW scale with 100‐m‐level wind turbine blades, where it is found that a load alignment coning schedule can substantially reduce the root flapwise bending moments. This moment reduction in this example can allow the rotor mass to be decreased significantly when compared with a conventional upwind three‐bladed rotor while maintaining structural performance and annual energy output.

Noyes, Carlos↗
DOE OSTI2017

High scale flavor alignment in two-Higgs doublet models and its phenomenology

The most general two-Higgs doublet model (2HDM) includes potentially large sources of flavor changing neutral currents (FCNCs) that must be suppressed in order to achieve a phenomenologically viable model. The flavor alignment ansatz postulates that all Yukawa coupling matrices are diagonal when expressed in the basis of mass-eigenstate fermion fields, in which case tree-level Higgs-mediated FCNCs are eliminated. In this work, we explore models with the flavor alignment condition imposed at a very high energy scale, which results in the generation of Higgs-mediated FCNCs via renormalization group running from the high energy scale to the electroweak scale. Using the current experimental bounds on flavor changing observables, constraints are derived on the aligned 2HDM parameter space. In the favored parameter region, we analyze the implications for Higgs boson phenomenology.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2026

Residual symmetries and scalar multiplet vacuum alignment in non-Abelian flavour models

We demonstrate that, upon minimizing a renormalizable, single-scalar potential invariant under a non-Abelian symmetry, special orientations in the associated vacuum alignment of the scalar multiplet correspond to the preservation of a discrete residual flavour symmetry in the broken phase of the theory. Conversely, we show that these special scalar alignments are perturbed when additional Lagrangian operators (e.g. renormalizable, multi-flavon operators and/or effective, higher-dimensional operators) are present that break said residual symmetry, leading to a vacuum reorientation and phenomenological consequences. We therefore construct a one-to-one correspondence principle between broken residual symmetries and vacuum alignment corrections, providing a mechanism to identify (and correct) a subtle but persistent form of phenomenologically relevant fine-tuning embedded in — but often ignored by — most successful non-Abelian flavour models. We first establish this correspondence in a set of toy models based on the S4 permutation symmetry, and then apply the lessons learned to the more realistic A4 Altarelli-Feruglio and ∆(27) Universal Texture Zero models.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2016

Dislocation mediated alignment during metal nanoparticle coalescence

Dislocation mediated alignment processes during gold nanoparticle coalescence were studied at low and high temperatures using molecular dynamics simulations and transmission electron microscopy. Particles underwent rigid body rotations immediately following attachment in both low temperature (500 K) simulated coalescence events and low temperature (~315 K) transmission electron microscopy beam heating experiments. In many low temperature simulations, some degree of misorientation between particles remained after rigid body rotations, which was accommodated by grain boundary dislocation nodes. These dislocations were either sessile and remained at the interface for the duration of the simulation or dissociated and cross-slipped through the adjacent particles, leading to improved co-alignment. Minimal rigid body rotations were observed during or immediately following attachment in high temperature (1100 K) simulations, which is attributed to enhanced diffusion at the particles' interface. However, rotation was eventually induced by {111} slip on planes parallel to the neck groove. These deformation modes led to the formation of single and multi-fold twins whose structures depended on the initial orientation of the particles. The driving force for {111} slip is attributed to high surface stresses near the intersection of low energy {111} facets in the neck region. The details of this twinning process were examined in detail using simulated trajectories, and the results reveal possible mechanisms for the nucleation and propagation of Shockley partials on consecutive planes. Deformation twinning was also observed in-situ using transmission electron microscopy, which resulted in the co-alignment of a set of the particles' {111} planes across their grain boundary and an increase in their dihedral angle. As a result, this constitutes the first detailed experimental observation of deformation twinning during nanoparticle coalescence, validating simulation results presented here and elsewhere.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Nematic cell alignment directs calcium waves in an epithelial monolayer

Tissues rely on supracellular signals to coordinate their cells over a long range. Two such tissuescale cues are calcium waves and patterns of cell-cell alignment or nematic order. During wound healing, for example, calcium waves propagate across a tissue to guide directed cell migration and reepithelialization. Defects in long-range cell-cell alignment, or nematic orientation, can act to localize morphogenetic events in a tissue. Although these two cues have been considered in isolation, we demonstrate a relationship in epithelial tissue between long-range calcium signaling and the cell’s nematic order: The speed of a wound-induced calcium wave depends monotonically on the angle between the wave vector and cell axis, with maximal wave speed occurring perpendicular to the tissue’s orientation. Including anisotropic di↵usive coupling between cells in a canonical reactiondi↵usion model recapitulates our measured calcium wave dynamics. Our model demonstrates how orientation defects can desynchronize information propagation across a tissue. A calcium wave front is bent around nematic defects, therefore cells the same distance from a wound can receive the calcium signal at di↵erent times. Our work elucidates how spatial patterns in global cell alignment can control collective communication via calcium signaling during development, wound healing, and disease.

Winterstrain, Annemarie C. [Brandeis University, W↗
DOE OSTI2015

Structure and ionic conductivity of well-aligned polycrystalline sodium titanogallate grown by reactive diffusion

We prepared the b-axis-oriented polycrystalline Na{sub 0.85}Ti{sub 0.51}Ga{sub 4.37}O{sub 8} (NTGO) embedded in Ga{sub 2}O{sub 3}-doped Na{sub 2}Ti{sub 4}O{sub 9} matrix using the reactive diffusion technique. When the sandwich-type Ga{sub 2}TiO{sub 5}/NaGaO{sub 2}/Ga{sub 2}TiO{sub 5} diffusion couple was heated at 1323 K for 24 h, the NTGO polycrystal was readily formed in the presence of a liquid phase. The resulting polycrystalline material was characterized by X-ray diffractometry, electron microscopy and impedance spectroscopy. We mechanically processed the annealed diffusion couple and obtained the thin-plate electrolyte consisting mostly of the grain-aligned NTGO polycrystal. The ionic conductivity (σ) of the electrolyte along the common b-axis direction steadily increased from 1.3×10{sup −4} to 7.3×10{sup −3} S/cm as the temperature increased from 573 to 1073 K. There was a slope change at ca. 792 K for the Arrhenius plot of σ; the activation energies were 0.39 eV above this temperature and 0.57 eV below it. The NTGO showed the crystal structure (space group C2/m) with substantial positional disordering of one of the two Ga sites. The Na{sup +} ions occupied ca. 43% of the Wyckoff position 4i site, the deficiency of which would contribute to the relatively high ionic conductivity along the b-axis. The reactive diffusion could be widely applicable as the novel technique to the preparation of grain-aligned ceramics of multi-component systems. - Graphical abstract: We have prepared the b-axis-oriented Na{sub 0.85}Ti{sub 0.51}Ga{sub 4.37}O{sub 8} polycrystal embedded in Ga{sub 2}O{sub 3}-doped Na{sub 2}Ti{sub 4}O{sub 9} matrix by the heat treatment of sandwich-type diffusion couple of Ga{sub 2}TiO{sub 5}/NaGaO{sub 2}/Ga{sub 2}TiO{sub 5}. The resulting Na{sub 0.85}Ti{sub 0.51}Ga{sub 4.37}O{sub 8} electrolyte showed the ionic conductivity ranging from 1.3×10{sup −4} S/cm at 573 K to 7.3×10{sup −3} S/cm at 1073 K. - Highlights: • The b-axis-oriented polycrystalline Na{sub 0.85}Ti{sub 0.51}Ga{sub 4.37}O{sub 8} is successfully prepared. • Crystal structure of Na{sub 0.85}Ti{sub 0.51}Ga{sub 4.37}O{sub 8} is determined by single-crystal XRD. • The polycrystal shows relatively high Na{sup +} ion conductivity along the common b-axis. • Reactive diffusion is successfully used for the preparation of grain-aligned ceramics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Structural, optical and gas sensing properties of vertically well-aligned ZnO nanowires grown on graphene/Si substrate by thermal evaporation method

Highlights: • Vertically well-aligned ZnO NW arrays with high aspect ratio and extremely large-surface-volume ratio were synthesized on graphene/Si substrate without the aid of metal catalyst by a simple thermal evaporation. • The gas sensor based on the vertical ZnO NW arrays-graphene structure exhibited high sensitivity and rapid response/recovery characteristics to NO{sub 2} gas at 200oC, and could be used to detect NO{sub 2} gas at very low levels (2, 6, 10 ppm). • The excellent sensing performance is mainly because of the large specific surface area and the presence of oxygen-vacancies at the surface of ZnO NWs, together with the creation of p-n heterojunctions between n-type ZnO NW and p-type graphene. • The common defects and optical properties of the ZnO NW arrays-graphene structure were studied in detail. • The possible growth mechanism of vertically well-aligned ZnO NWs on graphene and the gas-sensing mechanism of sensors were proposed. - Abstract: We report catalyst-free vertical growth of high-density ZnO nanowire (NW) arrays on Si substrate with a graphene buffer layer by thermal evaporation method. Structural, surface morphology, chemical composition and optical properties of ZnO NWs were studied by Field emission scanning electron microscopy (FE-SEM), High-resolution transmission electron microscopy (HR-TEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FTIR), photoluminescence (PL) and Raman spectroscopy. The results indicate that the grown ZnO NWs are single-crystalline and exhibit the hexagonal wurtzite crystal structure with a preferred orientation along the [0001] direction; all of the ZnO NWs vertically grow on the graphene/Si substrate. The majority of the as-grown NWs have diameters in the range of 250–300 nm and length up to several tens of micrometers, whereas a small portion of NWs have a diameter of approximately of 9–12 nm. Room temperature PL spectrum of the ZnO NWs exhibits a sharp and strong ultraviolet emission at 380 nm and a weak visible emission at around 516 nm. The role of graphene buffer layer in the vertical-aligned ZnO NW arrays growth and its improved optical properties is demonstrated. Importantly, the gas sensor based on these ZnO NWs exhibits high sensitivity and rapid response/recovery characteristics to NO{sub 2} gas at 200 °C, and can detect NO{sub 2} concentration as low as 2, 6 and 10 ppm. The excellent sensing performance is mainly due to the combination of the large specific surface area and the presence of oxygen-vacancies at the surface of ZnO NWs, together with the creation of p-n heterojunctions between n-type ZnO NW and p-type graphene. Such a ZnO NW/graphene structure is very promising for various applications, such as photonic, optoelectronic and sensor devices. In addition, the possible growth mechanism and the NO{sub 2} sensing gas mechanism of the ZnO NWs-graphene structure have been discussed.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2026

Servomotor-driven leveling elements for machine tool frame-to-floor alignment

This paper presents the results of aligning the frame to concrete floor of a large 5-axis machine tool by leveling element adjustments using servomotors instead of manual operation. The machine tool leveling elements used in this study are mechanical devices that attach the machine tool frame to the concrete foundation. These leveling elements are also adjustable so that each location along the machine tool can be uniquely adjusted such that the geometric errors of the frame are minimized, and the accuracy of the machine tool is improved. Off-the-shelf servomotors and connection equipment were installed at each of 12 leveling element locations for a precision 5-axis machine tool at Oak Ridge National Laboratory. The servomotors allow a technician to align the machine tool frame remotely, instead of crawling under the machine tool to iteratively manually adjust each of the 12 leveling elements. The open-loop servomotor-leveling element system design is presented in this paper as well as machine tool frame alignment results. The servomotor system significantly reduces leveling element adjustment time, eliminates the need for under-machine access, reduces technician physical strain, and significantly improves the adjustment repeatability.

Honeycutt, Andrew [ORNL]↗
DOE OSTI2018

Antimicrobial Properties of 2D MnO 2 and MoS 2 Nanomaterials Vertically Aligned on Graphene Materials and Ti 3 C 2 MXene

Two-dimensional (2D) nanomaterials have attracted considerable attention in biomedical and environmental applications due to their antimicrobial activity. In the interest of investigating the primary antimicrobial mode-of-action of 2D nanomaterials, we studied the antimicrobial properties of MnO 2 and MoS 2 , toward Gram-positive and Gram-negative bacteria. Bacillus subtilis and Escherichia coli bacteria were treated individually with 100 μg/mL of randomly oriented and vertically aligned nanomaterials for ~3 h in the dark. The vertically aligned 2D MnO 2 and MoS 2 were grown on 2D sheets of graphene oxide, reduced graphene oxide, and Ti 3 C 2 MXene. Measurements to determine the viability of bacteria in the presence of the 2D nanomaterials performed by using two complementary techniques, flow cytometry, and fluorescence imaging showed that, while MnO 2 and MoS 2 nanosheets show different antibacterial activities, in both cases, Gram-positive bacteria show a higher loss in membrane integrity. Scanning electron microscopy images suggest that the 2D nanomaterials, which have a detrimental effect on bacteria viability, compromise the cell wall, leading to significant morphological changes. Here, we propose that the peptidoglycan mesh (PM) in the bacterial wall is likely the primary target of the 2D nanomaterials. Vertically aligned 2D MnO 2 nanosheets showed the highest antimicrobial activity, suggesting that the edges of the nanosheets were likely compromising the cell walls upon contact.

2D nanomaterials↗
DOE OSTI2023

Fast Water Transport through Subnanometer Diameter Vertically Aligned Carbon Nanotube Membranes

Small-diameter carbon nanotubes (CNTs) have outstanding mass-transport properties, especially enhanced water flow. Here, we report on water transport through the first macroscopic membranes with vertically oriented, subnanometer (0.8 nm) CNT pores, made by a scalable, solution-based method with electric-field alignment of bulk-grown single-wall CNTs (SWCNTs). After plasma etching to open pores, vertically aligned CNTs served as the primary pathway for liquid-water transport. The CNT membranes showed fast pressure-driven water transport, with up to 105-fold enhancement compared to no-slip Hagen–Poiseuille flow. Comparing 0.8 and 3 nm CNTs, we found that the hydrodynamic slip lengths increased with decreasing nanotube diameter, reaching 8.5 μm for the smaller-diameter CNTs. Here, the results suggest that pressure-driven water transport in small-diameter CNTs is increasingly dominated by entrance resistance, thus becoming independent of nanotube length. Scalably fabricated membranes incorporating vertically aligned subnanometer CNT pores could have applications in water filtration, desalination, and energy harvesting.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2015

Comparing Quasiparticle H 2 O Level Alignment on Anatase and Rutile TiO 2

Knowledge of the alignment of molecular frontier levels in the ground state can be used to predict the photocatalytic activity of an interface. The position of the adsorbate’s highest occupied molecular orbital (HOMO) levels relative to the substrate’s valence band maximum (VBM) in the interface describes the favorability of photogenerated hole transfer from the VBM to the adsorbed molecule. This is a key quantity for assessing and comparing H 2 O photooxidation activities on two prototypical photocatalytic TiO 2 surfaces: anatase (A)-TiO 2 (101) and rutile (R)-TiO 2 (110). Using the projected density of states (DOS) from state-of-the-art quasiparticle (QP) G 0 W 0 calculations, we assess the relative photocatalytic activity of intact and dissociated H 2 O on coordinately unsaturated (Ticus) sites of idealized stoichiometric A-TiO 2 (101)/R-TiO 2 (110) and bridging O vacancies (O br vac ) of defective A-TiO 2-x (101)/R-TiO 2-x (110) surfaces (x = 1/4, 1/8) for various coverages. Such a many-body treatment is necessary to correctly describe the anisotropic screening of electron-electron interactions at a photocatalytic interface and, hence, obtain accurate interfacial level alignments. The more favorable ground state HOMO level alignment for A-TiO 2 (101) may explain why the anatase polymorph shows higher photocatalytic activities than the rutile polymorph. Our results indicate that (1) hole trapping is more favored on A-TiO 2 (101) than RTiO 2 (110) and (2) HO@Ti cus is more photocatalytically active than intact H 2 O@Ti cus .

Environmental Molecular Sciences Laboratory↗
DOE OSTI2015

Controlling band alignments by artificial interface dipoles at perovskite heterointerfaces

The concept ‘the interface is the device' is embodied in a wide variety of interfacial electronic phenomena and associated applications in oxide materials, ranging from catalysts and clean energy systems to emerging multifunctional devices. Many device properties are defined by the band alignment, which is often influenced by interface dipoles. On the other hand, the ability to purposefully create and control interface dipoles is a relatively unexplored degree of freedom for perovskite oxides, which should be particularly effective for such ionic materials. Here we demonstrate tuning the band alignment in perovskite metal-semiconductor heterojunctions over a broad range of 1.7 eV. This is achieved by the insertion of positive or negative charges at the interface, and the resultant dipole formed by the induced screening charge. This approach can be broadly used in applications where decoupling the band alignment from the constituent work functions and electron affinities can enhance device functionality.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Thickness-independent capacitance of vertically aligned liquid-crystalline MXenes

The scalable and sustainable manufacture of thick electrode films with high energy and power densities is critical for the large-scale storage of electrochemical energy for application in transportation and stationary electric grids. Two-dimensional nanomaterials have become the predominant choice of electrode material in the pursuit of high energy and power densities owing to their large surface-area-to-volume ratios and lack of solid-state diffusion. However, traditional electrode fabrication methods often lead to restacking of two-dimensional nanomaterials, which limits ion transport in thick films and results in systems in which the electrochemical performance is highly dependent on the thickness of the film. Strategies for facilitating ion transport—such as increasing the interlayer spacing by intercalation or introducing film porosity by designing nanoarchitectures—result in materials with low volumetric energy storage as well as complex and lengthy ion transport paths that impede performance at high charge–discharge rates. Vertical alignment of two-dimensional flakes enables directional ion transport that can lead to thickness-independent electrochemical performances in thick films. However, so far only limited success has been reported, and the mitigation of performance losses remains a major challenge when working with films of two-dimensional nanomaterials with thicknesses that are near to or exceed the industrial standard of 100 micrometres. Here we demonstrate electrochemical energy storage that is independent of film thickness for vertically aligned two-dimensional titanium carbide (Ti 3 C 2 T x ), a material from the MXene family (two-dimensional carbides and nitrides of transition metals (M), where X stands for carbon or nitrogen). The vertical alignment was achieved by mechanical shearing of a discotic lamellar liquid-crystal phase of Ti 3 C 2 T x . The resulting electrode films show excellent performance that is nearly independent of film thickness up to 200 micrometres, which makes them highly attractive for energy storage applications. In conclusion, the self-assembly approach presented here is scalable and can be extended to other systems that involve directional transport, such as catalysis and filtration.

25 ENERGY STORAGE↗