Future spaceborne memories with 10 sup 3- 10 sup 7 bit capacities
Weight, volume, and power estimates of future spaceborne memories with small bit capacities
Kim, B. W.↗
SEARCH · Engineering Papers
Results for “volume estimation”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Design analysis of levitation facility for space processing applications
Containerless processing facilities for the space laboratory and space shuttle are defined. Materials process examples representative of the most severe requirements for the facility in terms of electrical power, radio frequency equipment, and the use of an auxiliary electron beam heater were used to discuss matters having the greatest effect upon the space shuttle pallet payload interfaces and envelopes. Improved weight, volume, and efficiency estimates for the RF generating equipment were derived. Results are particularly significant because of the reduced requirements for heat rejection from electrical equipment, one of the principal envelope problems for shuttle pallet payloads. It is shown that although experiments on containerless melting of high temperature refractory materials make it desirable to consider the highest peak powers which can be made available on the pallet, total energy requirements are kept relatively low by the very fast processing times typical of containerless experiments and allows consideration of heat rejection capabilities lower than peak power demand if energy storage in system heat capacitances is considered. Batteries are considered to avoid a requirement for fuel cells capable of furnishing this brief peak power demand.
Frost, R. T.↗
Investigation to develop a multistage forest sampling inventory system using ERTS-1 imagery
The author has identified the following significant results. The annotation system produced a RMSE of about 200 m ground distance in the MSS data system with the control data used. All the analytical MSS interpretation models tried were highly significant. However, the gains in forest sampling efficiency that can be achieved by using the models vary from zero to over 50 percent depending on the area to which they are applied and the sampling method used. Among the sampling methods tried, regression sampling yielded substantial and the most consistent gains. The single most significant variable in the interpretation model was the difference between bands 5 and 7. The contrast variable, computed by the Hadamard transform was significant but did not contribute much to the interpretation model. Forest areas containing very large timber volumes because of large tree sizes were not separable from areas of similar crown cover but containing smaller trees using ERTS image interpretation only. All correlations between space derived timber volume predictions and estimates obtained from aerial and ground sampling were relatively low but significant and stable. There was a much stronger relationship between variables derived from MSS and U2 data than between U2 and ground data.
Langley, P. G.↗
An integrated study of earth resources in the state of California using remote sensing techniques
The author has identified the following significant results. The effects on estimates of monthly volume runoff were determined separately for each of the following parameters: precipitation, evapotranspiration, lower zone and upper zone tension water capacity, imperviousness of the watershed, and percent of the watershed occupied by riparian vegetation, streams, and lakes. The most sensitive and critical parameters were found to be precipitation during the entire year and springtime evapotranspiration.
Colwell, R. N.↗
A factory concept for processing and manufacturing with lunar material
A conceptual design for an orbital factory sized to process 1.5 million metric tons per year of raw lunar fines into 0.3 million metric tons of manufacturing materials is presented. A conservative approach involving application of present earth-based technology leads to a design devoid of new inventions. Earth based counterparts to the factory machinery were used to generate subsystem masses and lumped parameters for volume and mass estimates. The results are considered to be conservative since technologies more advanced than those assumed are presently available in many areas. Some attributes of potential space processing technologies applied to material refinement and component manufacture are discussed.
Driggers, G. W.↗
The X-ray luminosity function of Abell clusters
X-ray sources identified with Abell clusters of galaxies in distance classes less than or equal to 3 give a quantitative estimate of the volume luminosity function for those clusters emitting between 10 to the 44th and 10 to the 45th power ergs/s in X-rays. At higher luminosities, tentative identifications with more distant clusters can be interpreted at least as an upper limit. This limit allows a smooth extension of the luminosity function, but with a fairly steep decrease in the range from 10 to the 45th to 10 to the 46th power ergs/s. No direct information is available for luminosities less than 10 to the 44th power ergs/s because current X-ray surveys are limited to nearby distances with very few Abell clusters; however, constraints at the low-luminosity end can be set by considering the total volume density of Abell clusters and the upper limit to the numbers of unidentified X-ray sources. The luminosity function must flatten or turn over below 10 to the 44th power ergs/s; therefore, counts of distant X-ray clusters to such a faint intrinsic luminosity can yield cosmological information.
Schwartz, D. A.↗
Satellite and correlative measurements of the stratospheric aerosol. I An optical model for data conversions
A description is presented of an empirically based model of stratospheric aerosol optical properties (size distributions and refractive indices) and their variations. The need for such a model arose in the data validation and archival programs for two satellite sensors, SAM II and SAGE. These programs require the ability to convert measurements of a given aerosol macroproperty (e.g., volume extinction coefficient, volume backscatter coefficient, particle number or mass per unit volume) to best estimates of other aerosol macroproperties, and to assess quantitatively the uncertainties in the conversion process. The described model provides the information on size distributions, refractive indices and their variations necessary for these tasks, and also defines a procedure for combining the model information with empirical data in a way that facilitates automatic data processing. Although the model was developed for use in the satellite validation and archival programs, it also has proven useful in other studies of stratospheric aerosol.
Russell, P. B.↗
Remote sensing applied to forest resources
The development of methodologies to classify reforested areas using remotely sensed data is discussed. A preliminary study was carried out in northeast of the Sao Paulo State in 1978. The reforested areas of Pinus spp and Eucalyptus spp were based on the spectral, spatial and temporal characteristics fo LANDSAT imagery. Afterwards, a more detailed study was carried out in the Mato Grosso do Sul State. The reforested areas were mapped in functions of the age (from: 0 to 1 year, 1 to 2 years, 2 to 3 years, 3 to 4 years, 4 to 5 years and 5 to 6 years) and of the heterogeneity stand (from: 0 to 20%, 20 to 40%, 40 to 60%, 60 to 80% and 80 to 100%). The relative differences between the artificial forest areas, estimated from LANDSAT data and ground information, varied from -8.72 to +9.49%. The estimation of forest volume through a multistage sampling technique, with probability proportional to size, is also discussed.
Hernandezfilho, P.↗
Temperature effects on the universal equation of state of solids
Recently it has been argued based on theoretical calculations and experimental data that there is a universal form for the equation of state of solids. This observation was restricted to the range of temperatures and pressures such that there are no phase transitions. The use of this universal relation to estimate pressure-volume relations (i.e., isotherms) required three input parameters at each fixed temperature. It is shown that for many solids the input data needed to predict high temperature thermodynamical properties can be dramatically reduced. In particular, only four numbers are needed: (1) the zero pressure (P=0) isothermal bulk modulus; (2)it P=0 pressure derivative; (3) the P=0 volume; and (4) the P=0 thermal expansion; all evaluated at a single (reference) temperature. Explicit predictions are made for the high temperature isotherms, the thermal expansion as a function of temperature, and the temperature variation of the isothermal bulk modulus and its pressure derivative. These predictions are tested using experimental data for three representative solids: gold, sodium chloride, and xenon. Good agreement between theory and experiment is found.
Vinet, P.↗
Temperature effects on the universal equation of state of solids
Recently it has been argued based on theoretical calculations and experimental data that there is a universal form for the equation of state of solids. This observation was restricted to the range of temperatures and pressures such that there are no phase transitions. The use of this universal relation to estimate pressure-volume relations (i.e., isotherms) required three input parameters at each fixed temperature. It is shown that for many solids the input data needed to predict high temperature thermodynamical properties can be dramatically reduced. In particular, only four numbers are needed: (1) the zero pressure (P = 0) isothermal bulk modulus; (2) its P = 0 pressure derivative; (3) the P = 0 volume; and (4) the P = 0 thermal expansion; all evaluated at a single (reference) temperature. Explicit predictions are made for the high temperature isotherms, the thermal expansion as a function of temperature, and the temperature variation of the isothermal bulk modulus and its pressure derivative. These predictions are tested using experimental data for three representative solids: gold, sodium chloride, and xenon. Good agreement between theory and experiment is found.
Vinet, Pascal↗
Estimation of X-band scattering properties of tree components
An X-band FM-CW very fine range resolution scatterometer was used to acquire backscattering data for a number of tree species. Using a model to describe the scattering source function and an experimental procedure for selected removal of plant parts allows the estimation of the volume backscatter coefficient and the volume extinction coefficient. It is found that: (1) leaves are strong attenuators as well as scatterers; (2) the albedo at a given angle of incidence is nearly independent of the tree type; (3) the tree limbs are good attenuators but rather poor scatterers; and (4) the albedo changes as a function of the angle of incidence and for deciduous trees is also a function of the season.
Pitts, D. E.↗
Satellite rainfall retrieval by logistic regression
The potential use of logistic regression in rainfall estimation from satellite measurements is investigated. Satellite measurements provide covariate information in terms of radiances from different remote sensors.The logistic regression technique can effectively accommodate many covariates and test their significance in the estimation. The outcome from the logistical model is the probability that the rainrate of a satellite pixel is above a certain threshold. By varying the thresholds, a rainrate histogram can be obtained, from which the mean and the variant can be estimated. A logistical model is developed and applied to rainfall data collected during GATE, using as covariates the fractional rain area and a radiance measurement which is deduced from a microwave temperature-rainrate relation. It is demonstrated that the fractional rain area is an important covariate in the model, consistent with the use of the so-called Area Time Integral in estimating total rain volume in other studies. To calibrate the logistical model, simulated rain fields generated by rainfield models with prescribed parameters are needed. A stringent test of the logistical model is its ability to recover the prescribed parameters of simulated rain fields. A rain field simulation model which preserves the fractional rain area and lognormality of rainrates as found in GATE is developed. A stochastic regression model of branching and immigration whose solutions are lognormally distributed in some asymptotic limits has also been developed.
Chiu, Long S.↗
Optimization of organic Rankine cycles for space station applications
The purpose of the current program is to investigate the tradeoffs between solar dynamic and nuclear powered systems for the space station. This research is based on a typical Rankine cycle using toluene as the working fluid. The first objective is to produce an adequate thermodynamic cycle model and calculate its efficiency. The next step is to implement a sizing algorithm that calculates the capacity of the various elements of the system, such as the radiator and regenerator, for a given electrical output. Then, the mass of each component must be calculated to give the overall total system mass. Likewise, the space for each component can be determined, giving an estimate of what volume must be available to place the system into orbit.
Eubanks, Dana L.↗
Design of the primary and secondary Pre-TRMM and TRMM ground truth sites
Results generated over six months are covered in five manuscripts: (1) estimates of rain volume over the Peninsula of Florida during the summer season based upon the Manually Digitized Radar data; (2) the diurnal characteristics of rainfall over Florida and over the near shore waters; (3) convective rainfall as measured over the east coast of central Florida; (4) the spatial and temporal variability of rainfall over Florida; and (5) comparisons between the land based radar and an optical raingage onboard an anchored buoy 50 km offshore.
Garstang, Michael↗
Investigation into venting and non-venting technologies for the Space Station Freedom extravehicular activity life support system
Various venting and non-venting technologies for SSF EVA life support system are described, and the estimated weights and volumes for the options on a component and system level are reviewed. It is noted that a final design concept for the SSF extravehicular mobility unit has not been chosen.
Wilson, John L.↗
Automatic computation of wing-fuselage intersection lines and fillet inserts with fixed-area constraint
Procedures for automatic computation of wing-fuselage juncture geometry are described. These procedures begin with a geometry in wave-drag format. First, an intersection line is computed by extrapolating the wing to the fuselage. Then two types of filleting procedures are described, both of which utilize a combination of analytical and numerical techniques appropriate for automatic calculation. An analytical technique for estimating the added volume due to the fillet is derived, and an iterative procedure for revising the fuselage to compensate for this additional volume is given. Sample results are included in graphical form.
Barger, Raymond L.↗
Hydrological consequences of ponded water on Mars
Although geomorphological evidence for ancient highly active water cycling has long been obvious for Mars, geochemical analyses have only recently been found to be consistent with this fact. One approach to understanding the geomorphological evidence has been to estimate the total volume of the Martian hydrosphere. I will discuss an approach focused on the history of changing water processes on the planet, and on the understanding of those processes in a global sense.
Baker, V. R.↗
The highly ionized regions of NGC 6302 and NGC 6537
We present (Ne V) 24.32 micrometer and 3426 A emission-line fluxes for NGC 6302 and NGC 6537. These fluxes along with those of (Ne V) 14.3 micrometer allow us to determine the physical conditions within the highly ionized regions of these nebulae. The electron densities found via the (Ne V) line ratios are similar to those found in studies of the low-ionization regions. However, the electron temperatures determined from the (Ne V) line ratios are much greater than those in the low-ionization regions. However, the electron temperatures determined from the (Ne V) line ratios are much greater than those in the low-ionization regions. We use photoionization models to show that these high derived electron temperatures are inconsistent with the assumption that the nebular ionization is produced solely by radiation from the central star. Much of the intense (Ne V) 3426 A emission from these objects must arise from highly ionized shocked material; a conclusion which is in accord with other evidence. The fact that the (Ne V) infrared lines are less affected by the shock means that we can estimate the relative volumes of the shocked and radiatively excited portions of these nebulae. In the most likely scenario, the volume of the highly ionized shocked region is less than 10% that of the highly ionized region formed by photoionization. We note that under such conditions, infrared emission lines are more useful than optical or UV emission lines for abundance studies because they are less affected by shocks. With appropiate corrections to the optical and UV emission-line fluxes, these nebulae can still be described by photoionization models.
Rowlands, N.↗