Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “switch”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

A parametric SPICE model for the simulation of spark gap switches

The use of SPICE-based software for the simulation of pulsed power systems—even large complex systems—has become commonplace in the pulsed power community. This is in contrast to earlier work in the field that relied on specially developed simulation codes such as Sandia’s Screamer or the Navy Research Lab’s Bertha, which natively incorporated models for common pulsed power components such as spark gap switches. Unlike these programs, SPICE programs provide a simple and familiar user interface and wide availability. However, SPICE programs do not include realistic models for key pulsed power circuit devices—including the spark gap switch. While simple switch models do exist in SPICE programs, these can only crudely approximate the behavior of a spark gap. This effort focuses on developing an SPICE circuit model for a gas-filled spark gap switch that is physically realistic while being simple enough to permit simulations to run in reasonable times on typical personal computers. Detailed information is provided for implementation in two common versions of SPICE: LTspice and Orcad PSPICE. Adaptation to other SPICE programs is possible with minimal modification. The model is intended as a design tool that uses physical parameters as inputs to connect it directly to the development of useable pulsed power systems. Data collected from the operation of a high-pressure pulsed-charged switch and a complete 12-stage Marx generator have been used to demonstrate the implementation and accuracy of the model over a wide range of parameters.

Pouncey, J. Cameron (ORCID:0000000153500816)↗

Ultrafast all-optical diffraction switching using semiconductor metasurfaces

Ultrafast all-optical switching using Mie resonant metasurfaces requires both on-demand tunability of the wavefront of the light and ultrafast time response. However, devising a switching mechanism that has a high contrast between its “on” and “off” states without compromising speed is challenging. Here, we report the design of a tunable Mie resonant metasurface that achieves this behavior. Our approach utilizes a diffractive array of semiconductor resonators that support both dipolar and quadrupolar Mie resonances. By balancing the strengths of the dipole and quadrupole resonances, we can suppress radiation into the first diffraction order, thus creating a clearly delineated “off”-state at the operating wavelength. Then, we use optical injection of free- carriers to spectrally shift the multipoles and rebalance the multipole strengths, thereby enabling radiation into the diffraction order—all on an ultrafast timescale. We demonstrate ultrafast off-to-on switching with I on /I off ≈ 5 modulation of the diffracted intensity and ultrafast on-to-off switching with Ion/Ioff ≈ 9 modulation. Furthermore, both switches exhibit a fast τ tr ≈ 2.7 ps relaxation time at 215 μJ cm -2 pump fluence. Further, we show that for higher fluences, the temporal response of the metasurface is governed by thermo-optic effects. This combination of multipole engineering with lattice diffraction opens design pathways for tunable metasurface-based integrated devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Ion beam etching dependence of spin-orbit torque memory devices with switching current densities reduced by Hf interlayers

We report on the fabrication of nanoscale, three-terminal in-plane spin–orbit torque switching devices with low switching current densities. Critical parameters in the fabrication process, including the ion beam etching angle and time, were optimized to avoid fabrication defects and improve device yield. Measurements of the magnetic field and current-induced switching behavior of the tunnel junctions demonstrate a sensitivity to the nanopillar aspect ratio, which dictates the nanopillars’ anisotropy and thermal stability. Additionally, we show that the current density required for switching can be reduced and the device thermal stability increased by inserting Hf interlayers into the heterostructure. Micromagnetic simulations are generally consistent with the experimentally observed switching behavior, suggesting an increase in the interfacial perpendicular anisotropy at the CoFeB/MgO interface and the reduction in the Dzyaloshinskii–Moriya interaction at the W/CoFeB interface by the Hf interlayers.

36 MATERIALS SCIENCE↗

Ultraefficient resistance switching between charge ordered phases in 1 T -TaS 2 with a single picosecond electrical pulse

Progress in high-performance computing demands significant advances in memory technology. Among novel memory technologies that promise efficient device operation on a sub-ns timescale, resistance switching between charge ordered phases of 1T-TaS 2 has shown to be potentially useful for development of high-speed, energy efficient nonvolatile memory devices. Measurement of the electrical operation of such devices in the picosecond regime is technically challenging and hitherto still largely unexplored. Here, we use an optoelectronic “laboratory-on-a-chip” experiment for measurement of ultrafast memory switching, enabling accurate measurement of electrical switching parameters with 100 fs temporal resolution. Photoexcitation and electro-optic sampling on a (Cd,Mn)Te substrate are used to generate and, subsequently, measure electrical pulse propagation with intra-band excitation and sub-gap probing, respectively. We demonstrate high contrast nonvolatile resistance switching from high to low resistance states of a 1T-TaS 2 device using single sub-2ps electrical pulses. Using detailed modeling, we find that the switching energy density per unit area is exceptionally small, E A =9.4 fJ/μm 2 . Finally, the speed and energy efficiency of an electronic “write” process place the 1T-TaS 2 devices into a category of their own among new generation nonvolatile memory devices.

42 ENGINEERING↗

Thickness scaling and ferroelectric switching in wurtzite structure zinc magnesium oxide thin films

This study reports the thickness scaling of sputtered ferroelectric Zn 0.61 Mg 0.39 O (ZMO) thin films down to 43 nm. Encapsulated IrO 2 /ZMO/Ir capacitors exhibited switchable polarizations exceeding 50 μC cm −2 and coercive fields that increased from 3.9 to 4.4 MV cm −1 as the thickness decreased. Switching kinetics are best described by the simultaneous non-linear nucleation and the growth model. Bimodal switching is prevalent at low thicknesses, with the fastest switching times measured to be approximately 400 ns. Device encapsulation made ZMO switching kinetics more abrupt, potentially due to changes in the concentration of atmosphere-induced defects such as hydroxides. These results demonstrate stable ferroelectricity and sub-microsecond switching in sub-50 nm wurtzite ZMO, highlighting its potential as a low-voltage ferroelectric for integrated nonvolatile memory applications.

36 MATERIALS SCIENCE↗

Transversely diode-pumped Q-switched Nd : YAG laser with injection of radiation from a single-frequency semiconductor laser

A Q-switched Nd : YAG laser with a high-power transverse diode pumping and injection of seed radiation generated by a single-frequency semiconductor laser is described. The threshold seed radiation power at which the Q-switched Nd : YAG switches to the single-frequency mode is 0.44 mW (radiation intensity 5.6×10{sup −2} W cm{sup −2}). With increasing injection power, the spectral and power characteristics of the Q-switched laser almost do not change at a constant excitation of its active medium. The spectral linewidth of the Q-switched Nd : YAG laser with injection from a TLD-1060-14BF single-frequency semiconductor laser module does not exceed 90 MHz (wavelength 1064 nm). (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Yeast require redox switching in DNA primase

Eukaryotic DNA primases contain a [4Fe4S] cluster in the C-terminal domain of the p58 subunit (p58C) that affects substrate affinity but is not required for catalysis. We show that, in yeast primase, the cluster serves as a DNA-mediated redox switch governing DNA binding, just as in human primase. Despite a different structural arrangement of tyrosines to facilitate electron transfer between the DNA substrate and [4Fe4S] cluster, in yeast, mutation of tyrosines Y395 and Y397 alters the same electron transfer chemistry and redox switch. Mutation of conserved tyrosine 395 diminishes the extent of p58C participation in normal redox-switching reactions, whereas mutation of conserved tyrosine 397 causes oxidative cluster degradation to the [3Fe4S] + species during p58C redox signaling. Switching between oxidized and reduced states in the presence of the Y397 mutations thus puts primase [4Fe4S] cluster integrity and function at risk. Consistent with these observations, we find that yeast tolerate mutations to Y395 in p58C, but the single-residue mutation Y397L in p58C is lethal. Our data thus show that a constellation of tyrosines for protein-DNA electron transfer mediates the redox switch in eukaryotic primases and is required for primase function in vivo.

59 BASIC BIOLOGICAL SCIENCES↗

MEMS switching of contour-mode aluminum nitride resonators for switchable and reconfigurable radio frequency filters

Switching of transducer coupling in aluminum nitride contour-mode resonators provides an enabling technology for future tunable and reconfigurable filters for multi-function RF systems. By using microelectromechanical capacitive switches to realize the transducer electrode fingers, coupling between the metal electrode finger and the piezoelectric material is modulated to change the response of the device. On/off switched width extensional resonators with an area of <0.2 mm 2 demonstrate a Q of 2000, K 2 of 0.72, and >24 dB switching ratio at a resonator center frequency of 635 MHz. As a result, other device examples include a 63 MHz resonator with switchable impedance and a 470 MHz resonator with 127 kHz of fine center frequency tuning accomplished by mass loading of the resonator with the MEMS switches.

36 MATERIALS SCIENCE↗

Phenotypic switching of populations of cells in a stochastic environment

We report that in biology phenotypic switching is a common bet-hedging strategy in the face of uncertain environmental conditions. Existing mathematical models often focus on periodically changing environments to determine the optimal phenotypic response. We focus on the case in which the environment switches randomly between discrete states. Starting from an individual-based model we derive stochastic differential equations to describe the dynamics, and obtain analytical expressions for the mean instantaneous growth rates based on the theory of piecewise-deterministic Markov processes. We show that optimal phenotypic responses are non-trivial for slow and intermediate environmental processes, and systematically compare the cases of periodic and random environments. The best response to random switching is more likely to be heterogeneity than in the case of deterministic periodic environments, net growth rates tend to be higher under stochastic environmental dynamics. The combined system of environment and population of cells can be interpreted as host-pathogen interaction, in which the host tries to choose environmental switching so as to minimise growth of the pathogen, and in which the pathogen employs a phenotypic switching optimised to increase its growth rate. Finally, we discuss the existence of Nash-like mutual best-response scenarios for such host-pathogen games.

59 BASIC BIOLOGICAL SCIENCES↗

Switching dynamics and ultrafast inversion control of quantum dots for on-chip optical information processing

We demonstrate dynamical near-complete inversion switching of a two-level quantum dot driven by picosecond optical pulses in a bimodal photonic band gap (PBG) waveguide at microwatt power levels. This is enabled by a sharp steplike discontinuity in the local (electromagnetic) density of states (LDOS) provided by a cutoff in one of the two waveguide modes. The atomic Bloch vector equations in this colored vacuum are derived using dressed state description of the atomic density operator in the presence of phonon-mediated dephasing. Instead of assuming phenomenological decay rates, we derive explicit expressions for decay terms of bare state atomic dipole moments and population in the Born-Markov approximation from a master equation approach. Giant Mollow splitting of the atom level due to subwavelength light localization of strong driving pulse causes the time-dependent Mollow bands to straddle the LDOS jump, leading to different radiative decay rates in the upper and lower Mollow sidebands. This results in remarkable field-dependent spontaneous emission and dipolar dephasing rates, combined with a novel 'vacuum structure' term in the Bloch equations. Our Bloch equations predict ultrafast high-contrast inversion switching that is activated and deactivated by picosecond pulse trains detuned below and above the atomic resonance, respectively. This dynamic inversion is due to the rapid rise in relaxation rates as the pulse amplitude rises, causing the Bloch vector to switch from antiparallel to parallel alignment with the pulse 'torque vector'. Subsequent near-complete inversion occurs through an adiabatic following process retained long after the pulse amplitude subsides and the system reverts to slow relaxation. For a 1% inhomogeneously broadened distribution of quantum dot with average of 100 D dipole moment, driven by 1.5 mum picosecond pulses and coupled to a cutoff mode LDOS jump with radiative emission rates of gamma{sub high}=2.5 THz and gamma{sub low}=5 GHz, a large average population switching contrast of 0.5 is demonstrated with a phonon dephasing rate gamma{sub p}=0.5 THz. A 1.6 fJ control pulse is required per switching operation and a 30 muW pulse train is sufficient to maintain the inversion. This switchable gain (loss) segment of the PBG waveguide can be used to controllably amplify (absorb) signal pulses conveying optical information. This provides a robust mechanism for ultrafast multiwavelength channel all-optical logic in PBG microchips.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Joule Heating Effect on Field-Free Magnetization Switching by Spin-Orbit Torque in Exchange-Biased Systems

Switching of magnetization via spin-orbit torque provides an efficient alternative for nonvolatile memory and logic devices. However, to achieve deterministic switching of perpendicular magnetization, an external magnetic field collinear with the current is usually required, which makes these devices inappropriate for practical applications. As such, in this work, we examine the current-induced magnetization switching in a perpendicularly magnetized exchange-biased Pt/CoFe/IrMn system. A magnetic field annealing technique is used to introduce in-plane exchange biases, which are quantitatively characterized. Under proper conditions, field-free current-driven switching is achieved.We study the Joule heating effect, and we show how it can decrease the in-plane exchange bias and degrade the field-free switching. Furthermore, we discuss that the exchange-bias training effect can have similar effects.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Optical subpicosecond nonvolatile switching and electron-phonon coupling in ferroelectric materials

Direct optical ferroelectric switching (FE switch) has the advantage of being ultrafast over the traditional FE switch, which relies on domain nucleation and growth. However, how to realize nonvolatility in such an optical FE switch poses a serious challenge. Time-dependent density-functional theory molecular dynamics study reveals that subpicosecond nonvolatile FE switches can be realized in GeTe and PbTiO 3 . Here, while optical tuning of the transition barrier and initiation of a directional atomic motion are crucial, the dephasing of the excited state holds the key for the realization of nonvolatility.

36 MATERIALS SCIENCE↗

Manipulation of spin orientation via ferroelectric switching in Fe-doped Bi 2 WO 6 from first principles

Atomic-scale control of spins by electric fields is highly desirable for future technological applications. Magnetically doped Aurivillius-phase oxides present one route to achieve this, with magnetic ions substituted into the ferroelectric structure at dilute concentrations, resulting in spin-charge coupling. However, there has been minimal exploration of the ferroelectric switching pathways in this materials class, limiting predictions of the influence of an electric field on magnetic spins in the structure. Here, we determine the ferroelectric switching pathways of the end member of the Aurivillius phase family, Bi 2 WO 6 , using a combination of group theoretic analysis and density functional theory calculations. We find that in the ground state P2 1 ab phase, a two-step switching pathway via C2 and Cm intermediate phases provides the lowest energy barrier. Considering iron substitutions on the W site in Bi 2 WO 6 , we determine the spin easy axis. Finally, by tracking the change in spin directionality during ferroelectric switching, we find that a 90° switch in the polarization direction leads to a 112° reorientation of the spin easy axis. The low-symmetry crystal-field environment of Bi 2 WO 6 and magnetoelastic coupling on the magnetic dopant provide a route to spin control via an applied electric field.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Voltage-controlled magnetic anisotropy enabled by resistive switching

The discovery of new mechanisms of controlling magnetic properties by electric fields or currents furthers the fundamental understanding of magnetism and has important implications for practical use. Here, we present an approach of utilizing resistive switching to control magnetic anisotropy. We study a ferromagnetic oxide that exhibits an electrically triggered metal-to-insulator phase transition producing a volatile resistive switching. The switching occurs in a characteristic spatial pattern, the formation of an insulating barrier perpendicular to the current flow, which results in an unusual ferromagnetic/paramagnetic/ferromagnetic configuration. Further, the formation of this voltage-driven paramagnetic insulating barrier is accompanied by the emergence of a strong uniaxial magnetic anisotropy that overpowers the intrinsic material anisotropy. Our results demonstrate that resistive switching is an effective tool for manipulating magnetic properties. Because resistive switching can be induced in a broad range of materials, our findings could enable a new class of voltage-controlled magnetism systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Absence of Evidence of Electrical Switching of the Antiferromagnetic Néel Vector

Much theoretical and experimental concern has been focused on the electrical switching of the antiferromagnetic (AFM) Néel vector via spin-orbit torque. Measurements employing multiterminal patterned structures of Pt=AFM show recurring signals of the supposedly planar Hall effect and magnetoresistance, implying AFM switching. We show in this Letter that similar signals have been observed in structures with and without the AFM layer, and of an even larger magnitude using different metals and substrates. These may not be the conclusive evidence of spin-orbit torque switching of AFM, but the thermal artifacts of patterned metal structure on substrate. Furthermore, large current densities in the metallic devices, beyond the Ohmic regime, can generate unintended anisotropic thermal gradients and voltages. AFM switching requires unequivocal detection of the AFM N´eel vector before and after SOT switching.

36 MATERIALS SCIENCE↗

Local control of defects and switching properties in ferroelectric thin films

Electric-field switching of polarization is the building block of a wide variety of ferroelectric devices. In turn, understanding the factors affecting ferroelectric switching and developing routes to control it are of great technological significance. This research provides systematic experimental evidence of the role of defects in affecting ferroelectric-polarization switching and utilizes the ability to deterministically create and spatially locate point defects in $PbZr_{0.2}Ti_{0.8}O_3$ thin films via focused-helium-ion bombardment and the subsequent defect-polarization coupling as a knob for on-demand control of ferroelectric switching (e.g., coercivity and imprint). At intermediate ion doses ($0.22-2.2×10^{14}\,ions\,cm^{-2}$), the dominant defects (isolated point defects and small clusters) show a weak interaction with domain walls (pinning potentials from $200-500\,K\,MV\,cm^{-1}$), resulting in small and symmetric changes in the coercive field. At high doses ($0.22-1×10^{15}\,ions\,cm^{-2}$), on the other hand, the dominant defects (larger defect complexes and clusters) strongly pin domain-wall motion (pinning potentials from 500 to $1600\,K\,MV\,cm^{-1}$), resulting in a large increase in the coercivity and imprint, and a reduction in the polarization. This local control of ferroelectric switching provides a route to produce novel functions; namely, tunable multiple polarization states, rewritable pre-determined 180° domain patterns, and multiple zero-field piezoresponse and permittivity states. Such an approach opens up pathways to achieve multilevel data storage and logic, nonvolatile self-sensing shape-memory devices, and nonvolatile ferroelectric field-effect transistors.

36 MATERIALS SCIENCE↗

Current-induced switching of thin film α - Fe 2 O 3 devices imaged using a scanning single-spin microscope

Electrical switching of Néel order in an antiferromagnetic insulator is desirable as a basis for memory applications. Unlike electrically driven switching of ferromagnetic order via spin-orbit torques, electrical switching of antiferromagnetic order remains poorly understood. Here we investigate the low-field magnetic properties of 30-nm-thick, c-axis-oriented α-Fe 2 ⁢O 3 Hall devices using a diamond nitrogen-vacancy center scanning microscope. Using the canted moment of α-Fe 2⁢ O 3 as a magnetic handle on its Néel vector, we apply a saturating in-plane magnetic field to create a known initial state before letting the state relax in low field for magnetic imaging. Here, we repeat this procedure for different in-plane orientations of the initialization field. We find that the magnetic field images are characterized by stronger magnetic textures for fields along [$\overline{11}$20] and 11$\overline{2}$0, suggesting that despite the expected 3-fold magnetocrystalline anisotropy, our α-Fe 2 ⁢O 3 thin films have an overall in-plane uniaxial anisotropy. We also study current-induced switching of the magnetic order in α-Fe 2 ⁢O 3 . We find that the fraction of the device that switches depends on the current pulse duration, amplitude, and direction relative to the initialization field.

36 MATERIALS SCIENCE↗

Design of Auxiliary Circuit Elements for Achieving Zero Voltage Switching in a Wireless Power Transfer System

The auxiliary resonant commutated pole (ARCP) is being used to achieve zero voltage switching (ZVS) of power switches for improved efficiency and/or to reduce dv/dt at the switch node for better electromagnetic interference (EMI) performance and overall system reliability. This paper shows how an ARCP circuit can be used in a wireless power transfer system to achieve ZVS. Detailed analysis of ARCP circuit operation is presented to determine the requirements for achieving ZVS in the main switches of a wireless electric vehicle charging system. Based on this analysis, a design algorithm is developed to optimize the design of the ZVS assisting circuit components. The designed ARCP achieves soft switching of the MOSFETs in the primary inverter of an 85 kHz, 10 kW series-series compensated, stationary wireless power transfer system.

Saha, Tarak↗