SEARCH · Engineering Papers

Results for “surface energetics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

All sources NASA NTRS DOE OSTI

NASA NTRS1992

Simulation studies for surfaces and materials strength

The progress report for the period May 1, 1992 to October 31, 1992 is presented. During this period investigations were carried out in three areas. Binding energies and high energy binding sites were calculated for carbon atoms deposited on a (2 x 1) dimerized Si(100) surface. Structure- and energy-related properties of defects formed on relaxed diamond surfaces were investigated. Tersoff-type model functions for Si were employed to investigate the energetics of the following processes: (1) neutral monovacancy and divacancy formation and migration energies; (2) neutral bond-centered, site sharing, tetrahedral, and hexagonal self-interstitial formation and migration energies; and (3) the variation of these energies with distance from a bulk site of Frenkel defect formation and from (100) and (111) surfaces. Calculations are included in the appendices.

Halicioglu, Timur↗

DOE OSTI2023

Uptake of Pb and the Formation of Mixed (Ba,Pb)SO 4 Monolayers on Barite During Cyclic Exposure to Lead-Containing Sulfuric Acid

Barite (BaSO 4 ) is a common additive in lead-acid batteries, where it acts as a nucleating agent to promote the reversible formation and dissolution of PbSO 4 during battery cycling. However, little is known about the molecular-scale mechanisms the nucleation and cyclic evolution of PbSO 4 over a battery’s lifetime. In this study, we explore the responses of a barite (001) surface to cycles of high and low lead concentrations in the presence of 100 mM sulfuric acid using in-situ atomic force microscopy and high-resolution X-ray reflectivity. Here we find that PbSO 4 epitaxial films readily nucleate on the barite surface, even from solutions that are undersaturated relative to bulk PbSO 4 . Despite this, barite (001) proves to be an ineffective nucleator of bulk PbSO 4 , as multilayer growth is suppressed even in highly supersaturated solutions. Instead, we find evidence that Pb 2+ ions can directly exchange with Ba 2+ to create mixed (Ba,Pb)SO 4 surfaces. These chemically mixed surfaces do not host PbSO4 monolayers as readily as pristine barite, and the original reactivity is not regained until a fresh surface is reestablished by aggressive etching. Our results can be partly explained by traditional models of Stranski-Krastanov (S-K) growth, in which monolayer films are stabilized by a reduction in surface energy, but multilayer growth is inhibited by epitaxial strain. Complementary density functional theory calculations confirmed the basic energetic-terms of traditional S-K models, but also showed evidence form more complex, thickness-dependent, energetics than would be predicted from the S-K models. The experimental results can be better understood by extending the S-K model to consider the formation of mixed surfaces and films, which can have reduced strain and interfacial energies relative to pure films, while also being stabilized by entropy of mixing. These insights into non-stoichiometric heteroepitaxy will enable better predictions of how barite affects PbSO 4 nucleation in battery environments.

25 ENERGY STORAGE↗

DOE OSTI2021

Tailoring Interfaces in Solid-State Batteries Using Interfacial Thermochemistry and Band Alignment

Solid-state lithium ion batteries have enhanced thermal stability compared to batteries using liquid electrolytes. Although their practical implementation is limited by undesired side reactions between the electrode and electrolyte, different modification strategies have been proposed to stabilize these reactive interfaces. These approaches have been primarily based upon bulk materials properties, however, which may not necessarily be representative of the chemistry at the solid/solid interface. In this work, first principles calculations and X-ray scattering experiments are used to elucidate molecular-level reactivity and develop design principles for tailored interfaces based on surface and interfacial properties. Because of its well-known instability, the interface between the Li metal anode and the lithium lanthanum titanate (LLTO) solid electrolyte is applied as a model system. Density functional theory calculations are used to describe bulk, surface, and interfacial thermochemistry of the Li/LLTO system, and interfacial reconstruction is probed using ab initio molecular dynamics. These simulations of the Li/LLTO interface demonstrate facile decomposition concomitant with reduction of Ti 4+ ions. Based on further insights from computational analysis of the surface band edge positions, La 2 O 3 is proposed as an interlayer coating and is shown to provide an energetic barrier for interfacial charge transfer and decomposition reactions from X-ray reflectivity measurements and theoretical calculations. The findings in this work suggest that design strategies based on surface and interfacial properties can be used to kinetically stabilize electrode/electrolyte interfaces in solid-state batteries.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

NASA NTRS1987

Potential surfaces for O atom-polymer reactions

Ab initio quantum chemistry methods are used to study the energetics of interactions of O atoms with organic compounds. Polyethylene (CH2)n has been chosen as the model system to study the interactions of O(3P) and O(1D) atoms with polymers. In particular, H abstraction is investigated and polyethylene is represented by a C3 (propane) oligomeric model. The gradient method, as implemented in the GRADSCF package of programs, is used to determine the geometries and energies of products and reactants. The saddle point, barrier geometry is determined by minimizing the squares of the gradients of the potential with respect to the internal coordinates. To correctly describe the change in bonding during the reaction at least a two configuration MCSCF (multiconfiguration self consistent field) or GVB (generalized valence bond) wave function has to be used. Basis sets include standard Pople and Dunning sets, however, increased with polarization functions and diffuse p functions on both the C and O atoms. The latter is important due to the O(-) character of the wave function at the saddle point and products. Normal modes and vibrational energy levels are given for the reactants, saddle points and products. Finally, quantitative energetics are obtained by implementing a small CAS (complete active space) approach followed by limited configuration interaction (CI) calculations. Comparisons are made with available experimental data.

Laskowski, B. C.↗

NASA NTRS1990

Energetics of molecular-beam epitaxy models

The removal energies of constituent atoms from various unreconstructed semiconductor surfaces are calculated using a Green function method. An efficient difference-equation approach within the second-neighbor tight-binding model is employed. For a compound AB, binding energies for the A and B atoms on the (111), (-1 -1 -1), (100), and (110) surfaces are calculated. Analyses are made of the energy to remove an atom from the nearly full surface and from the nearly empty surface. Results are presented for Si, GaAs, CdTe, and HgTe; and the surface sublimation energies are found to depend on surface coverage and do not display a simple linear relationship to the number of bonds broken, as is often assumed in modeling growth by MBE.

Krishnamurthy, Srinivasan↗

DOE OSTI2020

Beyond Volume Variation: Anisotropic and Protrusive Lithiation in Bismuth Nanowire

Materials storing energy via an alloying reaction are promising anode candidates in rechargeable lithium-ion batteries (LIBs) due to their much higher energy density than the current graphite anode. Until now, the volumetric expansion of such electrode particles during lithiation has been considered as solely responsible for cycling-induced structural failure. Here, we report different structural failure mechanisms using single-crystalline bismuth nanowires as the alloying-based anode. The Li–Bi alloying process exhibits a two-step transition, that is, Bi–Li 1 Bi and Li 1 Bi–Li 3 Bi. Interestingly, the Bi–Li 1 Bi phase transition occurs not only in the bulk Bi nanowire but also on the particle surface showing its characteristic behavior. The bulk alloying kinetics favors a Bi-(012)-facilitated anisotropic lithiation, whose mechanism and energetics are further studied using the density functional theory calculations. More importantly, the protrusion of Li 1 Bi nanograins as a result of anisotropic Li–Bi alloying is found to dominate the surface morphology of Bi particles. The growth kinetics of Li 1 Bi protrusions is understood atomically with the identification of two different controlling mechanisms, that is, the dislocation-assisted strain relaxation at the Bi/Li 1 Bi interface and the short-range migration of Bi supporting the off-Bi growth of Li 1 Bi. As loosely rooted to the bulk substrate and easily peeled off and detached into the electrolyte, these nanoscale protrusions developed during battery cycling are believed to be an important factor responsible for the capacity decay of such alloying-based anodes at the electrode level.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2022

Effects of a CFD-improved dimple stepped-lip piston on thermal efficiency and emissions in a medium-duty diesel engine

Diesel piston-bowl shape is a key design parameter that affects spray-wall interactions and turbulent flow development, and in turn affects the engine’s thermal efficiency and emissions. It is hypothesized that thermal efficiency can be improved by enhancing squish-region vortices as they are hypothesized to promote fuel-air mixing, leading to faster heat-release rates. However, the strength and longevity of these vortices decrease with advanced injection timings for typical stepped-lip (SL) piston geometries. Dimple stepped-lip (DSL) pistons enhance vortex formation at early injection timings. Previous engine experiments with such a bowl show 1.4% thermal efficiency gains over an SL piston. However, soot was increased dramatically [SAE 2022-01-0400]. In a previous study, a new DSL bowl was designed using non-combusting computational fluid dynamic simulations. This improved DSL bowl is predicted to promote stronger, more rotationally energetic vortices than the baseline DSL piston: it employs shallower, narrower, and steeper-curved dimples that are placed further out into the squish region. In the current experimental study, this improved bowl is tested in a medium-duty diesel engine and compared against the SL piston over an injection timing sweep at low-load and part-load operating conditions. No substantial thermal efficiency gains are achieved at the early injection timing with the improved DSL design, but soot emissions are lowered by 45% relative to the production SL piston, likely due to improved air utilization and soot oxidation. However, these benefits are lost at late injection timings, where the DSL piston renders a lower thermal efficiency than that of the SL piston. Energy balance analyses show higher wall heat transfer with the DSL piston than with the SL piston despite a 1.3% reduction in the piston surface area. Vortex enhancement may not necessarily lead to improved efficiency as more energetic squish-region vortices can lead to higher convective heat transfer losses.

42 ENGINEERING↗

DOE OSTI2020

Nitride or Oxynitride? Elucidating the Composition–Activity Relationships in Molybdenum Nitride Electrocatalysts for the Oxygen Reduction Reaction

Molybdenum nitride (Mo–N) catalysts have shown promising activity and stability for the oxygen reduction reaction (ORR) in acid. However, the effect of oxygen (O) incorporation (from synthesis, catalysis, or exposure to air) on their activity remains elusive. Here, we use reactive sputtering to synthesize three compositions of thin-film catalysts and use extensive materials characterization to investigate the depth-dependent structure and incorporated O. We show that the as-deposited Mo–N films are highly oxidized both at the surface (>30% O) and in the bulk (3–21% O) and that the ORR performance is strongly correlated with the bulk structure and composition. Activity for 4e– ORR is highest for compositions with the highest N/O and N/Mo ratio. Furthermore, H 2 O 2 production for the films with moderate O content is comparable to or higher than the most H 2 O 2 -selective nonprecious metal catalysts in acidic electrolyte, on a moles per mass or surface area of catalyst basis. Density functional theory provides insight into the energetics of O incorporation and vacancy formation, and we hypothesize that activity trends with O/N ratios can be traced to the varying crystallite phases and their interactions with ORR adsorbates. This work demonstrates the prevalence and significance of O in metal nitride electrocatalysts and motivates further investigation into the role of O in other nonprecious metal materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

Carrier Diffusion Lengths Exceeding 1 μm Despite Trap-Limited Transport in Halide Double Perovskites

In this work we image charge carrier transport over nanometers–micrometers and picoseconds–microseconds in halide double perovskites Cs 2 AgBiBr 6 and Cs 2 AgTlBr 6 single crystals using stroboscopic scattering microscopy. Both materials exhibit long, microsecond carrier lifetimes because of their indirect or symmetry-forbidden direct bandgaps. We extract free-charge and trap-limited mobilities near the surface and in the crystal bulk. The free-charge mobilities for both materials (~10–50 cm 2 /(V s)) can reach those reported for archetypal lead halide perovskites. We measure trap densities exceeding 10 17 cm –3 within ~20 nm of the crystal surface. Measurements on freshly cleaved or thermally annealed crystals suggest the traps are primarily halide vacancies that likely form through surface bromine degassing. Although these traps considerably slow charge transport, they are energetically shallow, enabling thermally induced detrapping and mobile carriers over microseconds at room temperature. This defect tolerance yields carrier diffusion lengths exceeding 1 μm even in the presence of large trap densities and under solar excitation conditions where traps are not saturated. These results suggest that halide double perovskites could rival the best lead-based perovskites for photovoltaic and optoelectronic applications.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Real-time observation of the exchange process between H 2 O and NO in the metal–organic framework Ni-MOF-74

Molecular exchange is a common step occurring in many technological processes such as competitive adsorption, chemical separation, capture, delivery, and release. However, the underlying principle is not fully understood, especially in nanoconfined environments where the energetics and kinetics of such processes can deviate from that on flat surfaces. In this study, we unravel the mechanism of a molecular exchange process by studying the displacement of NO by H 2 O in Ni-MOF-74 in real-time using in situ infrared spectroscopy combined with ab initio calculations. We show that weakly bound H 2 O gradually displaces strongly bound NO on the metal sites by first weakening the M–N bond through forming H-bond and then moving the NO away so that it eventually desorbs. Interestingly, we further find that additional water facilitates this exchange by significantly lowering the kinetic barrier associated with this process as well as the overall energy of the final state. Although our study focuses on Ni-MOF-74, we believe that our finding and explanation of unexpected exchange phenomena—where strongly adsorbed molecules are apparently easily displaced by much weaker bound H 2 O—is applicable to a much larger group of frameworks and will be helpful in designing and improving MOFs for real-world applications where humidity is often present.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2024

Impact of gas injection location and divertor surface material on ITER fusion power operation phase divertor performance assessed with SOLPS-ITER *

Abstract The ITER divertor design and performance assessment, primarily based on the SOLPS-4.3 burning plasma database (Pitts R. et al 2019 Nucl. Mater. Energy 20 100696), assumes the use of beryllium (Be) as the divertor surface material and the injection of gas from the main chamber top. However, the current ITER baseline favors gas injection from the more toroidally symmetric sub-divertor region. This paper evaluates the implications of these assumptions for divertor performance in the ITER fusion power operation phase. The impact of the divertor surface material and the gas injection location on the main ions mirrors the hydrogen only low power phase scenario shown in Park J.-S. et al (2020 Nucl. Fusion 61 016021). However, during burning plasma operation, extrinsic impurity seeding will be required. In the case of neon (Ne), studied here, impurity retention is influenced by both the divertor surface material and the fueling location. Neon leakage increases due to more energetic reflection from tungsten than beryllium, but equivalent divertor performance can be achieved by adjusting the neon seeding rate. While the impurity seeding location does not affect the distributions of impurity or radiation, the fueling location does. Top fueling provides local ionization sources mainly in the mid-SOL under detached conditions, enhancing divergences of the flux there (source-driven flow), bringing stagnation points close to the fueling location, and equilibrating flows towards both targets. In contrast, the global flow pattern (in the absence of fluid drifts) in the case of sub-divertor fueling is biased towards the inner target. Impurity flows, driven by force balance, largely mirror those of the main ion flow, including the stagnation point. The case with top fueling enhances Ne retention and corresponding radiation in the outer divertor, effectively reducing the total and peak target heat fluxes by 20%–40%, compared to the case with divertor fueling. Meanwhile, the case with outer target fueling also achieves similar reductions by enhancing plasma-neutral interactions. These results suggest the possibility that the selection of the fueling location and throughput can be used as an actuator to control impurity divertor retention and divertor radiation asymmetry.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2022

Metal-Tipped and Electrochemically Wired Semiconductor Nanocrystals: Modular Constructs for Directed Charge Transfer

In our 2017 proposal to the Solar Photochemistry division of DOE/BES/Office of Science we targeted the creation, characterization and integratation of new II-IV semiconductor heterostructured nanomaterials into ultra-thin film (tethered) nanocrystalline arrays on transparent metal oxide (TCO) supports. Materials were to include CdSe quantum dots (QDs), asymmetric CdSe@CdS tetrapods (TPs) and CdSe@CdS nanorods (NRs), into unique photoelectrochemical platforms. The ultimate goal was to tether these new nanomaterials to either electron- or hole-selective oxide interlayers that would afford vectoral photo-induced charge transfer and ultimately formation of molecular products such as H 2 . This was an ambitious set of goals but integrated well with our previous work in this general area.

14 SOLAR ENERGY↗

DOE OSTI2021

Free Energies of Hydrated Halide Anions: High Through-Put Computations on Clusters to Treat Rough Energy-Landscapes

With a longer-term goal of addressing the comparative behavior of the aqueous halides F−, Cl−, Br−, and I− on the basis of quasi-chemical theory (QCT), here we study structures and free energies of hydration clusters for those anions. We confirm that energetically optimal (H2O)nX clusters, with X = Cl−, Br−, and I−, exhibit surface hydration structures. Computed free energies, based on optimized surface hydration structures utilizing a harmonic approximation, typically (but not always) disagree with experimental free energies. To remedy the harmonic approximation, we utilize single-point electronic structure calculations on cluster geometries sampled from an AIMD (ab initio molecular dynamics) simulation stream. This rough-landscape procedure is broadly satisfactory and suggests unfavorable ligand crowding as the physical effect addressed. Nevertheless, this procedure can break down when n≳4, with the characteristic discrepancy resulting from a relaxed definition of clustering in the identification of (H2O)nX clusters, including ramified structures natural in physical cluster theories. With ramified structures, the central equation for the present rough-landscape approach can acquire some inconsistency. Extension of these physical cluster theories in the direction of QCT should remedy that issue, and should be the next step in this research direction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

NASA NTRS1985

Hydrogen and water desorption on the moon - Approximate, on-line simulations

The basic models that have been used over the last 15 years to describe the accumulation and release of solar wind-related species at lunar conditions at the lunar surface are reviewed. Recent results which show that these models are not totally valid are discussed. It is suggested that mature lunar surface soils may act as efficient converters for transforming the flux of energetic solar wind protons into a flux of low-energy hydrogen and water molecules continuously injected into the lunar atmosphere.

Blanford, G. E.↗

NASA NTRS1989

Flexible, Polymer-Filled Metallic Conductors

Procedure developed to make materials both flexible and reasonably good electrical conductors. Metal or polymer sheet substrate cleaned with beam of energetic inert-gas ions to remove adsorbed gases and contaminants from surface. After cleaning, substrate coated by cosputter deposition of both conductive metal and flexible polymer. Removed by either mechanical or chemical-dissolution technique, and resulting flexible metal/polymer conductor bonded at low temperature to conductor-surface contacts.

Banks, Bruce A.↗

NASA NTRS2007

Detailed Physical Modeling Reveals the Magnetar Nature of a Transient Anomalous X-ray Pulsar

Anomalous X-ray Pulsars (AXPs) belong to a class of neutron stars believed to harbor the strongest magnetic fields in the universe, as indicated by their energetic bursts and their rapid spindowns. However, a direct measurement of their surface field strengths has not been made to date. It is also not known whether AXP outbursts result from changes in the neutron star magnetic field or crust properties. Here we report the first, spectroscopic measurement of the surface magnetic field strength of an AXP, XTE J1810-197, and solidify its magnetar nature. The field strength obtained from detailed spectral analysis and modeling is remarkably close to the value inferred from the rate of spindown of this source and remains nearly constant during numerous observations spanning over two orders of magnitude in source flux. The surface temperature, on the other hand, declines steadily and dramatically following the 2003 outburst of this source. Our findings demonstrate that heating occurs in the upper neutron star crust during an outburst and sheds light on the transient behaviour of AXPs.

Guever, T.↗

NASA NTRS2007

The Magnetar Nature and the Outburst Mechanism of a Transient Anomalous X-ray Pulsar

Guver, Tolga↗

NASA NTRS2011

Lunar Solar Origins Exploration (LunaSOX)

The Moon offers a unique vantage point from which to investigate the Sun and its interaction via the solar wind magnetic fields, plasma, and energetic particles with the geospace system including the Moon itself. The lunar surface and exosphere provide in part a record of solar coronal plasma material input and resultant space weathering over billions of years. The structure and dynamics of solar wind interactions with the Moon provide an accessible near-Earth laboratory environment for study of general solar wind interactions with the vast multitude of airless asteroidal bodies of the inner solar system. Spacecraft in lunar orbit have the often simultaneous opportunity, except when in the Earth's magnetosphere, to make in-situ compositional measurements of the solar wind plasma and to carry out remote observations from the Moon of the solar corona, potentially enabled by lunar limb occultation of the solar disk. The LunaSOX project at NASA Goddard Space Flight Center is addressing these heliophysical science objectives from and of the Moon with support from NASA's Lunar Advanced Science and Exploration Research (LASER) program: (1) specify history of solar wind parameters at and sunward of the Moon through enhanced access (http://lunasox.gsfc.nasa.gov/) to legacy and operational mission data products from the Apollo era to the present, (2) model field and plasma interactions with the lunar surface, exosphere, and wake, as constrained by the available data, through hybrid kinetic code simulations, and (3) advance mission concepts for heliophysics from and of the Moon.

Cooper, John F.↗