Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “sublimation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Nanostructures evolution assessment and spectroscopic properties modification induced by electronic energy loss in KTaO 3 crystal

Modifications of micro/nanostructure and photoelectric properties under swift ion irradiation (645 MeV Xe 35+ ) of KTaO 3 crystal with varying electronic energy losses (7.2–31.4 keV/nm) and ion velocities (0.18–5.00 MeV/u) have been studied by combining experimental and calculated approaches. The i-TS calculations combined with molecular dynamics simulations are compared with the experimental observations, revealing the inner track fine structures from individual spherical defects to continuous ion tracks with core–shell morphologies, and a quantitative relationship, including the melting (0.42 eV/atom), damage (0.75 eV/atom), and amorphous (1.71 eV/atom) thresholds, is established to successfully predict the inner disorder/amorphous proportions and track damage morphologies. The surface nanostructures of nanohillocks (isolated or partial overlaps) and nanopits (serious overlaps) directly depend on the combined action of the deposited potential and kinetic energies of incident ions, which induce local melting and sublimation in the near-surface region. Owing to the decreased recombination and the increased separation efficiency between electrons and holes, the higher photogenerated charge carrier mobility enhanced the photocurrent effect, further optimizing the photoconductivity performance in Xe 35+ -irradiated KTaO 3 . Therefore, controlled defect engineering using the ion irradiation technique, as an effective strategy, could design tailored nanostructure systems and regulate photoelectric properties, further promoting the development of novel technological applications.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Radiation hot spot formation on UF 6 30B cylinders

The accurate material accountancy of a country's enriched uranium hexafluoride (UF 6 ) stockpiles is imperative to the International Atomic Energy Agency (IAEA) for determining appropriate material safeguards. Uranium hexafluoride is typically stored in large cylinders with enrichment verification typically performed with a NaI gamma detector using the enrichment meter method. This approach for calculating enrichment assumes that the UF 6 is homogeneous inside the cylinder. Here, the measurements and tests presented in this manuscript show that the UF 6 in cylinders left outside in the elements can experience fractionation, leading to inhomogeneity, and subsequent development of radiation hot spots. These hot spot locations can produce errant enrichment measurements. In dark-colored cylinders that experience significant surface heating from the sun, UF 6 sublimates off the cylinder walls, leaving only the uranium daughter products in a horizontal patch (stripe) along the cylinder's midline. This daughter patch is hypothesized to be the source of the radiation hot spots. The patch forms during the summer and tends to decay away during the winter, when solar intensity and temperatures are reduced.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2023

Bark beetle impacts on forest evapotranspiration and its partitioning

Insect outbreaks affect forest structure and function and represent a major category of forest disturbance globally. However, the resulting impacts on evapotranspiration (ET), and especially hydrological partitioning between the abiotic (evaporation) and biotic (transpiration) components of total ET, are not well constrained. As a result, we combined remote sensing, eddy covariance, and hydrological modeling approaches to determine the effects of bark beetle outbreak on ET and its partitioning at multiple scales throughout the Southern Rocky Mountain Ecoregion (SRME), USA. At the eddy covariance measurement scale, 85 % of the forest was affected by beetles, and water year ET as a fraction of precipitation (P) decreased by 30 % relative to a control site, with 31 % greater reductions in growing season transpiration relative to total ET. At the ecoregion scale, satellite remote sensing masked to areas of >80 % tree mortality showed corresponding ET/P reductions of 9–15 % that occurred 6–8 years post-disturbance, and indicated that the majority of the total reduction occurred during the growing season; the Variable Infiltration Capacity hydrological model showed an associated 9–18 % increase in the ecoregion runoff ratio. Long-term (16–18 year) ET and vegetation mortality datasets extend the length of previously published analyses and allowed for clear characterization of the forest recovery period. During that time, transpiration recovery outpaced total ET recovery, which was lagged in part due to persistently reduced winter sublimation, and there was associated evidence of increasing late summer vegetation moisture stress. Overall, comparison of three independent methods and two partitioning approaches demonstrated a net negative impact of bark beetles on ET, and a relatively greater negative impact on transpiration, following bark beetle outbreak in the SRME.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

How does humidity data impact land surface modeling of hydrothermal regimes at a permafrost site in Utqia$\mathrm{\dot{g}}$vik, Alaska?

Humidity is a basic and crucial meteorological indicator commonly measured in several forms, including specific humidity, relative humidity, and absolute humidity. These different forms can be inter-derived based on the saturation vapor pressure (SVP). In past decades, dozens of formulae have been developed to calculate the SVP with respect to, and in equilibrium with, liquid water and solid ice surfaces, but many prior studies use a single function for all temperature ranges, without considering the distinction between over the liquid water and ice surfaces. These different approaches can result in humidity estimates that may impact our understanding of surface-subsurface thermal-hydrological dynamics in cold regions. In this study, we compared the relative humidity (RH) downloaded and calculated from four data sources in Alaska based on five commonly used SVP formulas. These RHs, along with other meteorological indicators, were then used to drive physics-rich land surface models at a permafrost-affected site. Here, we found that higher values of RH (up to 40%) were obtained if the SVP was calculated with the over-ice formulation when air temperatures were below freezing, which could lead to a 30% maximum difference in snow depths. The choice of whether to separately calculate the SVP over an ice surface in winter also produced a significant range (up to 0.2 m) in simulated annual maximum thaw depths. The sensitivity of seasonal thaw depth to the formulation of SVP increases with the rainfall rate and the height of above-ground ponded water, while it diminishes with warmer air temperatures. These results show that RH variations based on the calculation of SVP with or without over-ice calculation meaningfully impact physically-based predictions of snow depth, sublimation, soil temperature, and active layer thickness. Under particular conditions, when severe flooding (inundation) and cool air temperatures are present, care should be taken to evaluate how humidity data is estimated for land surface and earth system modeling.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Experimental and modeling study of the effect of confinement on the thermal decomposition of organic materials

Simultaneous Thermal Analysis is widely used to study thermal decomposition of a variety of organic materials, and the choice of experimental conditions is very important to obtain reliable mass loss and heat flow curves. Here in this work we investigate the effect of confinement on the thermal decomposition of organic materials. As an example, we explore high-density polyethylene (HDPE) and one of its pyrolysis products, namely eicosane (C 20 H 42 ), through experiments and modeling in open crucibles and crucibles closed with a pierced lid. A new model is developed for evaporation and sublimation from open and pinhole thermal-analysis pans. It considers the kinetic resistance of evaporation at the liquid-vapor interface, inhibition of evaporation by buildup of vapor inside the pan, thermal expansion of vapor inside the pan, and diffusion of vapor from the pan. The model is validated using simultaneous heat-flow and mass-loss measurements of n-eicosane evaporation for various pinhole sizes, down to 50 µm. The importance of product evaporation inhibition for measuring polymer decomposition was demonstrated using HDPE. This study sheds light on the effect of confinement on the mass loss rate of organic materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Surface Passivation by Excess Sulfur for Controlled Synthesis of Large, Thin SnS Flakes

Tin sulfide (SnS) is part of the group IV chalcogenides (SnX, GeX; X: S, Se), a family of anisotropic layered materials considered for thin film photovoltaics, optoelectronics, and valleytronics, and predicted narrow bandgap multiferroic materials. Large ultrathin SnS flakes, suitable for a variety of applications, are challenging to synthesize because of the enhanced surface reactivity due to the open layer structure of SnS which gives rise to a competition between lateral and vertical growth. Here we investigate the effects of added sulfur on passivating the surface and modifying the balance between lateral expansion and thickening of SnS flakes in chemical vapor transport from a SnS precursor. In addition, we investigate the growth of SnS flakes and compare the results of synthesis from a pure SnS precursor with growth, in which a slight excess of sulfur is supplied in different ways. Our results demonstrate that small amounts of excess sulfur can profoundly affect the size and thickness distributions of SnS flakes. The largest and thinnest flakes are obtained if (i) traces of sulfur are added and (ii) the sulfur source consists either of small Sx fragments released at high temperatures from the reactor walls, or atomic S supplied by sublimation from SnS 2 . The likely mechanism for the observed growth modifications is a transient surface passivation of SnS flakes during growth, which reduces the reactivity of the top facet of the flakes, limits vertical growth, and thus gives rise to ensembles with increased lateral size and reduced thickness.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Tuning Thermal Stability through Dopant Size in Chemically Doped DPP–Thiophene Polymers

Molecular doping of conjugated polymers (CPs) is a key strategy for improving the performance of organic electronics devices, particularly thermoelectrics. Doped donor–acceptor (D–A) conjugated polymers, characterized by a tunable energy gap between the Fermi level and the transport band, show great promise in achieving high electrical conductivity (σ) while preserving a favorable Seebeck coefficient (S). Despite the promising performance enhancement of chemically doped D–A polymers, their thermal stability remains largely underexplored, a crucial consideration for the long-term operation of organic thermoelectric devices. In this study, we investigated the dopant size-dependent thermal stability of a diketopyrrolopyrrole-thiophene (DPP-T) D–A copolymer, utilizing two p-dopants: 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F 4 TCNQ) and Mo(tfd-CO 2 Me) 3 . Temperature-dependent UV–vis–NIR spectroscopy revealed that DPP-T/F 4 TCNQ is more prone to dedoping under a high temperature thermal stress than DPP-T/Mo(tfd-CO 2 Me) 3 . Although the F 4 TCNQ doped polymer shows higher initial in-plane conductivity than its Mo(tfd-CO 2 Me) 3 counterpart, it undergoes a conductivity loss of more than an order of magnitude after annealing at 120 °C for 30 min. In contrast, the in-plane conductivity of DPP-T/Mo(tfd-CO 2 Me) 3 remains stable under the same thermal conditions. Thermogravimetric analysis ruled out dopant sublimation as a primary contributor to dedoping, leading us to attribute the conductivity loss in F 4 TCNQ-doped DPP-T to dopant phase separation and migration. This observation was further confirmed by X-ray scattering studies and nanoscale infrared microscopy and spectroscopy studies. This work could provide further insights into the thermal stability of doped conjugated polymers and suggests that incorporating bulkier dopants is an effective strategy to enhance the thermal robustness of doped DPP-type systems.

Conjugated polymers↗
DOE OSTI2022

Pr(H 3 BNMe 2 BH 3 ) 3 and Pr(thd) 3 as Volatile Carriers for Actinium-225. Deposition of Actinium-Doped Praseodymium Boride Thin Films for Potential Use in Brachytherapy

Here we show that the praseodymium N,N-dimethylaminodiboranate complex Pr(H 3 BNMe 2 BH 3 ) 3 and the 2,2,6,6-tetramethylheptane-3,5-dionate complex Pr(thd) 3 can serve as volatile carriers for 225 Ac. The actinium coordination complexes Ac(H 3 BNMe 2 BH 3 ) 3 and Ac(thd) 3 are the likely species subliming with the carrier material. A sample of 225 Ac-doped Pr(H 3 BNMe 2 BH 3 ) 3 was used to deposit amorphous 225 Ac-doped praseodymium boride films on glass and Si(100) at 300 °C. Furthermore, the α emission spectra of the refractory films are well-resolved, suggesting that they could be used as radioactive implants for brachytherapy and related treatments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Synthesis, Structure, and Properties of Volatile Lanthanide Dialkyltriazenides

Several dialkyltriazenide complexes of the lanthanide elements neodymium, europium, and erbium have been prepared; these include the homoleptic complex Er(Bu t N 3 Bu t ) 3 , the tetrahydrofuran monoadducts Ln(Bu t N 3 Bu t ) 3 (THF) where Ln = Nd or Eu, and the lithium salts [Li(THF)][Ln(MeN 3 Bu t ) 4 ] where Ln = Eu or Er. Crystal structures, nuclear magnetic resonance data, and infrared data are reported for all complexes. Further, the di-tert-butyltriazenide complexes are thermally stable, sublime at reasonably low temperatures, and show smooth volatilization without decomposition, which make them potentially useful in lanthanide separation processes and as chemical vapor deposition precursors for lanthanide nitrides and other phases.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Morphology of Vapor-Deposited Acetonitrile Films

Crystalline acetonitrile has two polymorphs, a high temperature (HT) phase that is stable between 217 K and its melting point at 229 K, and a low temperature (LT) phase that is stable below 217 K. Solid acetonitrile films can be prepared by vapor deposition in an ultra-high vacuum chamber. To prevent sublimation of the film temperatures are often kept below 150 K. While the LT phase is thermodynamically favored at these low temperatures, such preparation usually results in the formation of the metastable HT polymorph. In this work we use reflection adsorption infrared spectroscopy (RAIRS) and temperature programmed desorption (TPD) experiments to investigate the effects of the deposition temperature and underlying substrate on the morphology of acetonitrile films prepared with molecular beam deposition. We obtained the elusive LT phase when dosing at 120 K on a graphene substrate and on a crystalline decane layer. Dosing acetonitrile on other surfaces produced the HT phase, as did annealing of amorphous films. We used TPD experiments to determine the Gibbs energy difference between the HT and LT phases. Our ΔG values agree with extrapolation of equilibrium calorimetry data. Furthermore, we also observed that acetonitrile films were amorphous when dosed at temperatures ≤ 60 K, and porous for temperatures ≤ 50 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Prediction of Redox Potentials for the Late Actinides Cm to Lr Using Electronic Structure Methods

Our previously developed computational method for calculating the aqueous redox potentials of the early actinides has been extended to the later elements in the actinide series: Cm, Bk, Cf, Es, Fm, Md, No, and Lr in multiple oxidation states. These calculations were performed using density functional theory with small-core pseudopotentials and their associated basis sets. Solvation effects were considered via a supermolecule-continuum approach, with 30 water molecules representing two solvation shells. Both the COSMO and SMD implicit solvation models were utilized. The structural parameters and hydration numbers for Cm(III), Bk(III), Bk(IV), and Cf(III) are in reasonable agreement with the available experimental data. For redox processes involving atomic cations in solution, the B3LYP/COSMO approach predicted redox potentials to within ±0.2 V of experiment for most redox couples, consistent with our prior work. Inclusion of spin-orbit corrections in specific redox pairs, especially those with the later actinides in high oxidation states, yields improved results relative to calculations including only scalar-relativistic corrections. The An +m /An(0) redox potentials were calculated using a Born-Haber cycle incorporating sublimation, ionization, and hydration energies. Due to a lack of experimental data, three sets of ionization energies were used for the Born-Haber cycle. The calculated An(III/0) potentials showed better agreement with experimental data when using the COSMO solvation model and the test set comprising the NIST recommended ionization energies. Furthermore, the Md(II/0) potential was better described with the SMD model, whereas No(II/0) was not well described by all methods. Finally, the computational approach was able to predict redox potentials that for most cases agreed with the current available experimental or estimated data.

Actinides↗
DOE OSTI2021

Energetics of Ag Adsorption on and Adhesion to Rutile TiO 2 (100) Studied by Microcalorimetry

The adsorption and adhesion energies of vapor-deposited Ag on rutile TiO 2 (100) films have been measured using single crystal adsorption calorimetry (SCAC) and He + low energy ion scattering spectroscopy (LEIS). Ag grows as three-dimensional (3D) nanoparticles at 300 and 100 K. The saturation particle density is 8 × 10 16 particles/m 2 at 300 K and 2.5 × 10 17 particles/m 2 at 100 K. The differential heat of adsorption starts low, increases with Ag coverage, and finally approaches the sublimation enthalpy of Ag at both 300 and 100 K. At 300 K, the differential heat of adsorption starts from 208 kJ/mol and rises rapidly to 265 kJ/mol by 1 ML. At 100 K, Ag grows nanoparticles with smaller particle size on the terraces, while at 300 K, the Ag nanoparticles have bigger particle size and grow on step edges with stronger binding strength to the nanoparticles. Thus, the heat of Ag adsorption at 100 K starts at 141 kJ/mol (near the monomer size limit on terrace sites) and remains lower than that at 300 K until 1.5 ML. Here, the adhesion energy of Ag(solid) to rutile TiO 2 (100) is found to be large (~2.44 J/m 2 ), supporting a trend of decreasing adhesion energy with the enthalpy of oxide reduction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Thermally Stable Ruthenium Contact for Robust p‑Type Tellurium Transistors

Tellurium (Te) is attractive for p-channel transistors due to its high hole mobility. Despite having a low thermal budget suitable for back-end-of-line (BEOL) monolithic integration, the practical realization of Te transistors is hindered by its thermal stability. In this work, we investigate thermal stability for Te thin films grown via scalable thermal evaporation. Our findings identify ruthenium as a more thermally stable contact for p-type Te transistors, capable of withstanding temperatures up to 250 °C. Ruthenium exhibits significantly lower diffusivity in Te compared to other contact metals commonly used such as nickel and palladium. Using the transfer-length method, we measured a contact resistance of 1.25 kΩ·μm at the ruthenium-tellurium interface. Additionally, the incorporation of high-κ ZrO2 encapsulation not only suppresses the sublimation of the Te channel at elevated temperatures but also serves as the gate dielectric in top-gate devices operating at 1 V, achieving an on/off current ratio of 105.

Rahman, I K M Reaz↗
DOE OSTI2022

Reduced Recombination and Improved Performance of CdSe/CdTe Solar Cells due to Cu Migration Induced by Light Soaking

The performance of CdTe solar cells has advanced impressively in recent years with the incorporation of Se. Instabilities associated with light soaking and copper reorganization have been extensively examined for the previous generation of CdS/CdTe solar cells, but instabilities in Cu-doped Se-alloyed CdTe devices remain relatively unexplored. In this work, we fabricated a range of CdSe/CdTe solar cells by sputtering CdSe layers with thicknesses of 100, 120, 150, 180, and 200 nm on transparent oxide-coated glass and then depositing CdTe by close-spaced sublimation. After CdCl 2 annealing, Cu-doping, and back metal deposition, a variety of analyses were performed both before and after light soaking to understand the changes in device performance. The device efficiency was degraded with light soaking in most cases, but devices fabricated with a CdSe layer thickness of 120 nm showed reasonably good efficiency initially (13.5%) and a dramatic improvement with light soaking (16.5%). Here, the efficiency improvement is examined within the context of Cu ion reorganization that is well known for CdS/CdTe devices. Low-temperature photoluminescence data and V oc versus temperature measurements indicate a reduction in nonradiative recombination due to the passivation of defects and defect complexes in the graded CdSe x Te 1–x layer.

CdSexTe1−x↗
DOE OSTI2025

Exploring the Electrochemical Stability Window of an All-Solid-State Composite Cathode via a Novel Operando Tender XPS Setup

All-solid-state batteries (ASSBs) have the potential to provide greater energy density than conventional batteries based on liquid electrolytes. Here, an operando ASSB cell setup for tender X-ray photoelectron spectroscopy (XPS) was developed, and the interface of a Ni-rich layered transition metal oxide cathode active material (CAM) and an Li 6 PS 5 Cl (LPSCl) solid electrolyte (SE) was evaluated during initial charge/discharge cycles. After validating the cell performance against a conventional pouch cell operated at high compression, intermittent galvanostatic cycling was performed, and XPS data were recorded as a function of state of charge (SOC). Upon the initial charge of the cell to ≈3.3 V Li , the LPSCl appears to decompose into LiCl, Li 3 PS 4 , and polysulfides, whose amount gradually increases with potential. Upon further charge, at a potential higher than ≈3.8 V Li , initially, present sulfate and sulfite impurities decompose, and at ≈74% SOC (corresponding to a cathode potential of ≈4.10 V Li ), surface reconstruction of the CAM particles due to lattice oxygen release is detected. In addition, at potentials beyond ≈4.6 V Li , a decrease of the S 1s counts of the sum of the LPSCl, the thiophosphate, and polysulfide species suggests the formation of elemental sulfur that is lost via sublimation into the vacuum chamber.

25 ENERGY STORAGE↗
DOE OSTI2020

Visualizing Oxidation Mechanisms in Few-Layered Black Phosphorus via In Situ Transmission Electron Microscopy

Layered two-dimensional (2D) black phosphorus (BP) exhibits novel semiconducting properties including a tunable bandgap and high electron mobility. However, the poor stability of BP in ambient environment severely limits potential for application in future electronic and optoelectronic devices. While passivation or encapsulation of BP using inert materials/polymers has emerged as a plausible solution, a detailed fundamental understanding of BP's reaction with oxygen is imperative to rationally advance its use in applications. Here, we use in situ environmental transmission electron microscopy to elucidate atomistic structural changes in mechanically exfoliated few-layered BP during exposure to varying partial pressures of oxygen. An amorphous oxide layer is seen on the actively etching BP edges, and the thickness of this layer increases with increasing oxygen partial pressure, indicating that oxidation proceeds via initial formation of amorphous P x O y species which sublime to result in the etching of the BP crystal. We observe that while few-layered BP is stable under the 80 kV electron beam (e-beam) in vacuum, the lattice oxidizes and degrades at room temperature in the presence of oxygen only in the region under the e-beam. The oxidative etch rate also increases with increasing e-beam dosage, suggesting the presence of an energy barrier for the oxidation reaction. Preferential oxidative etching along the [0 0 1] and [0 0 1] crystallographic directions is observed, in good agreement with density functional theory calculations showing favorable thermodynamic stability of the oxidized BP (0 0 $\bar{1}$) planes compared to the (1 0 0) planes. Finally, we expect the atomistic insights and fundamental understanding obtained here to aid in the development of novel approaches to integrate BP in future applications.

2D materials↗
DOE OSTI2022

Size-Dependent Adsorption and Adhesion Energetics of Ag Nanoparticles on Graphene Films on Ni(111) by Calorimetry

Interest in the use of carbon supports for late transition metal nanoparticle catalysts has expanded rapidly due to the increasing importance of electrocatalysts for clean energy and environmental technologies and the use and storage of renewable electricity. Compared to oxide supports, almost nothing is known about the effect of metal nanoparticle size on the energies of the metal atoms within carbon-supported nanoparticles, yet these energies are crucial for understanding their surface reactivity and sintering kinetics. Here, the growth morphology and adsorption energetics of vapor-deposited Ag onto clean graphene/Ni(111) surfaces have been studied using a combination of single-crystal adsorption calorimetry (SCAC) and He + low-energy ion scattering (LEIS). The differential heat of Ag adsorption is 207 kJ/mol for making ~30 atom Ag particles on graphene terraces at 100 K and 16 kJ/mol higher for making ~9 atom Ag clusters at defect sites at the same temperature. The heat of adsorption increases rapidly with Ag coverage as 3D Ag nanoparticles nucleate and grow in size, asymptotically reaching within 5 kJ/mol of the bulk Ag sublimation enthalpy (285 kJ/mol) by 2 ML. The heats of adsorption and Ag nanoparticle densities from LEIS (~10 16 /m 2 ) were combined to provide the Ag/graphene adhesion energy (E adh = 1.8 J/m 2 in the large-particle limit) and the Ag chemical potential (μ) versus effective particle diameter (D). The Ag chemical potential was well-fitted by μ(D) = (3γ v /M – E adh )(1 + (1.5 nm)/D)(2V m /D), where γ v /M is the surface energy of bulk Ag and V m is its molar volume. The same equation is known to fit similar data for late transition metals on clean surfaces of metal oxide single crystals. The adhesion energy of Ag measured here on graphene falls within the wide range measured for Ag on those oxide surfaces and is almost as large as on the oxide that binds Ag particles most strongly, namely CeO 2 (111), which is well-known to be very effective at resisting catalyst deactivation by metal sintering. Furthermore, these results imply that carbon supports will be effective at resisting sintering and that Ag particles smaller than 6 nm on graphene will bind small adsorbed reaction intermediates more weakly than supports with weaker adhesion to Ag, like MgO(100).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Zinc Speciation and Propane Dehydrogenation in Zn/H-ZSM-5 Catalysts

Zn/H-ZSM-5 catalysts have been frequently investigated for propane dehydrogenation (PDH); however, the active site remains unresolved due to the complexity of the system. We employed in situ FTIR spectroscopy and a kinetics method to correlate the Zn speciation and PDH activity in Zn/H-ZSM-5 with two Si/Al ratios (15 and 39) and a range of Zn/Al ratios (0–1.7). Incremental additions of zinc show that Zn 2+ sites are preferentially formed on H-ZSM-5 over a fraction of paired Al sites followed by [Zn-O-Zn] 2+ and [ZnOH] + sites and then ZnO x clusters. The [Zn-OH] + and [Zn-O-Zn] 2+ sites in H-ZSM-5 are more active and selective than isolated Zn 2+ for PDH. [Zn-OH] + species sublimate over time on stream, leading to catalyst deactivation, while [Zn-O-Zn] 2+ species are stable even after high-temperature reduction (750 °C for 60 min). Three distinct Zn sites ([Zn-O-Zn] 2+ , Zn 2+ , and [ZnOH] + ) show a similar propane reaction order (close to 1) and H 2 reaction order (close to 0). Combined with the lack of Zn hydride when propane flows over the catalyst at 550 °C, it is concluded that propane adsorption and dissociation is a rate-determining step and H 2 desorption is fast. This work indicates that the preparation of H-ZSM-5 with abundant Al pairs may be a strategy to form stable and selective Zn/H-ZSM-5 catalysts for propane dehydrogenation. Furthermore, it is also highlighted that examining the effect of both metal/Al ratios and Al distribution of the zeolite is crucial in identifying the metal cations in metal–zeolite systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗