SEARCH · Engineering Papers

Results for “stemming”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

All sources NASA NTRS DOE OSTI

NASA NTRS1977

Study of noise and inflow distortion sources in the NASA QF-1B fan using measured blade and vane pressures

Pressure transducers were installed on the blades and vanes of QF-1B, a transonic-tip-speed fan from the NASA Quiet Fan Program which was tested on the outdoor quiet fan test facility at NASA-Lewis. Signals from the transducers and from far field microphones were analyzed to determine sources of nonuniform inflow and noise. The nonuniform inflow was mostly unsteady with roughly equal contributions from atmospheric turbulence and rig interference. The rig interference was largest at the bottom and appeared to be generated by the support structure which was located behind the inlet lip under the fan. Interaction of this inflow distortion was the dominant source of noise at 1, 2, and 3 times blade passing frequency (BPF) at 60, 70, and 80 percent of design speed. At 90 percent speed, noise at BPF was dominated by the steady rotor field. A broadband spectrum peak centered at about 2.2 times BPF was identified as rotor/stator interaction stemming from a high frequency rotor exit flow component. The remaining broadband energy from 0.3 to 3.5 times BPF was attributed to the better known type of rotor/stator interaction associated with rotor wake turbulence.

Hanson, D. B.↗

NASA NTRS1976

The surface of Mars - The view from the Viking 2 lander

Viking 2 lander began imaging the surface of Mars at Utopia Planitia on September 3, 1976. The surface is a boulder-strewn reddish desert cut by troughs that probably form a polygonal network. A plateau can be seen to the east of the spacecraft, which for the most probable lander location is approximately the dirction of a tongue of ejecta from the crater Mie. Boulders at the lander 2 site are generally more vesicular than those near lander 1. Fines at both lander sites appear to be very fine-grained and to be bound in a duricrust. The pinkish color of the sky, similar to that observed at the lander 1 site, indicates suspension of surface material. However, the atmospheric optical depth is less than that at the lander 1 site. After dissipation of a cloud of dust stirred during landing, no changes other than those stemming from sampling activities have been detected in the landscape. No signs of large organisms are apparent at either landing site.

Mutch, T. A.↗

NASA NTRS1977

Diffraction of a shock wave by a compression corner. II - Single Mach reflection

The two-dimensional time-dependent Euler equations which govern the flow field resulting from the interaction of a planar shock with a compression corner are solved for initial conditions which result in single Mach reflection of the incident planar shock. The Euler equations are first transformed to include the self-similarity of the flow field. A second transformation is employed to normalize the distances between the ramp and the reflected shock and between the wall and the Mach stem. The resulting equations in strong conservation-law form are solved using a second-order discontinuity-fitting finite-difference approach. The results are compared with experimental interferograms and existing first-order shock-capturing numerical solutions.

Shankar, V.↗

NASA NTRS1977

Instability analysis of torispherical pressure vessel heads with triangular thin-shell finite elements

The elastic instability of an internally-pressurized cylindrical tank with a torispherical head is investigated using a triangular, doubly curved, thin-shell finite element. The formulation of the finite element, which is based upon cubic displacement functions and a modified principle of potential energy, is first described. Then, the element is verified by comparing numerical results for the linear, stable analysis to alternative solutions for the same problem. The subsequent instability investigation includes the solution of the linearized problem of equilibrium bifurcation, that is, of the classical eigenvalue problem, and a general nonlinear analysis, based on tracing the nonlinear load-displacement path. The critical pressure, obtained with use of the general nonlinear analysis, agrees closely with an experimental result as well as with a numerical solution stemming from an axisymmetric formulation.

Kanodia, V. L.↗

NASA NTRS1976

NASA atomic hydrogen standards program - An update

Some of the design features of NASA hydrogen masers are discussed including the large hydrogen source bulb, the palladium purified, the state selector, the replaceable pumps, the small entrance stem, magnetic shields, the elongated storage bulb, the aluminum cavity, the electronics package, and the autotuner. Attention is also given to the reliability and operating life of these hydrogen atomic standards.

Reinhardt, V. S.↗

NASA NTRS1977

The possibility of flash fires in toxicity tests

The concentrations of combustible compounds in the gases generated in toxicity tests may together result in a flammable mixture which could be ignited by accident or by a deficiency in procedure. The principal hazard stems from the increase in the concentrations of combustible non-toxic gases which may result from efforts to increase the concentrations of toxic gases to obtain desired physiological responses.

Hilado, C. J.↗

NASA NTRS1978

S-Band complex-weight module for adaptive processing

S-band complex weight for adaptive processing is fabricated as microwave integrated circuit. When interfaced with suitable control component, it is potentially capable of producing 25 dB rejection of interface with bandwidth of 500 MHz. Performance inproves with decreased bandwidth. Versatility stems from numerous control methods available in broadening field of adaptive processing.

Gianatasio, A. J.↗

NASA NTRS1978

Friction of thick laminates

Technique which improves fiber alignment and reduces void content of thick laminated structures is readily applicable to structures that contain sections such as ribs, channels, or bosses joined to thin stems of same material.

Dickerson, G. E.↗

NASA NTRS1979

Fastener for thermal insulation blankets

Serrated-stem fastener, similar to those that hold wire harnesses, has been adapted to attach blankets to supporting structures. Easy installation and removal implemented.

Cole, J. D.↗

NASA NTRS1978

The role of cell membranes in the regulation of lignification in pine cells

The identity of pine cell membranes bearing PAL enzyme activity, the isolation of a plasma membrane preparation from pine cells for testing as a regulatory barrier in lignification, and the measurement of the geopotential effect in pine stems are presented. A model to describe and predict the interaction of gravity and lignification of higher plants was developed.

Hendrix, D. L.↗

NASA NTRS1977

Chemical stratigraphy of the Apollo 17 deep drill cores 70009-70007

A description is presented of an analysis of a total of 26 samples from three core segments (70009, 70008, 70007) of the Apollo 17 deep drill string. The deep drill string was taken about 700 m east of the Camelot Crater in the Taurus-Littrow region of the moon. Three core segments have been chemically characterized from the mainly coarse-grained upper portion of the deep drill string. The chemical data suggest that the entire 70007-70009 portion of the deep drill string examined was not deposited as a single unit, but was formed by several events sampling slightly different source materials which may have occurred over a relatively short period of time. According to the data from drill stem 70007, there were at least two phases of deposition. Core segment 70009 is probably derived from somewhat different source material than 70008. It seems to be a very well mixed material.

Ehmann, W. D.↗

NASA NTRS1975

Surface exposure history of individual crystals in the lunar regolith

The paper reports measurements of solar-flare tracks, microcraters, and glass accretionary particles in crystals from several mature soil samples and from different levels of the Apollo 15 and 16 deep drill stems. Although almost every crystal appears to have been at (or very near) the surface of the moon, the crater data indicate that typical grains are exposed to free space for only 1000-10,000 years. Neither total track densities nor track gradients are correlated with the presence of or absence of crater surfaces. Also considered is the use of cratered crystals in assessing the nature of surface changes produced by various treatments employed to study 'surface' effects.

Poupeau, G.↗

NASA NTRS1980

FEP plug protects H2 masers

Lifetime of hydrogen-maser bulb is increased by replacing beam stop plate with thick fluorinated ethylene-propylene (FEP) plug inserted in hole opposite beam entrance stem of bulb.

Deluca, J. J.↗

NASA NTRS1978

Positive isolation disconnect

A disconnect composed basically of two halves each consisting of a poppet valve operable to isolate fluid with essentially zero fluid loss is presented. The two halves are coupled together by a quickly releasable coupling which may be either a coupling ring tightened or loosened by a twisting motion, or a clamp operated by a pivoted to prevent disconnecting the two halves until both valves are in closed condition. The positive feature of the device is one requiring a valve closing step before a disconnect step, and takes structural form in an accentric lobe mounted on the valve operating stem. If some obstruction prevents the poppet from moving to its seat, the eccentric lobe cannot be rotated to the closed position, and the interlock prevents a disconnect.

Friedell, M. V.↗

NASA NTRS1978

Design principles of the PORT library

The design of PORT stemmed from the basic principles of portability and ease of use. The attributes and mechanisms used in the library to support this philosophy include the use of a portable subset of FORTRAN, and the use of (machine-dependent) functions to supply the necessary environment parameters. Abbreviated calling sequences are mede possible by a simplified error-handling technique, and by the use of a portable stack allocator for temporary workspace. Experiences to date with these approaches, and plans for the future are reviewed.

Fox, P.↗

NASA NTRS1978

Coma recovery

Arousal from coma is defined as a function of the reticular activating system that is located between the spinal cord and the diencephalon core of the brain stem. This system receives information from all the sensory functions of the body for distribution to the various parts of the cortex in order to maintain normal activities. Multimodal, neurosensory stimulation techniques are outlined that are designed to help the patient recover from the comatose state.

Dimancescu, M. D.↗

NASA NTRS1979

Changes in the terrestrial atmosphere-ionosphere-magnetosphere system due to ion propulsion for solar power satellite placement

Preliminary estimates of the effects massive Ar(+) injections on the ionosphere-plasmasphere system with specific emphasis on potential communications disruptions are given. The effects stem from direct Ar(+) precipitation into the atmosphere and from Ar(+) beam induced precipitation of MeV radiation belt protons. These injections result from the construction of Solar Power Satellites using earth-based materials in which sections of a satellite must be lifted from low earth to geosynchronous orbit by means of ion propulsion based on the relatively abundant terrestrial atmospheric component, Ar. The total amount of Ar(+) injected in transporting the components for each Solar Power Satellite is comparable to the total ion content of the ionosphere-plasmasphere system while the total energy injected is larger than that of this system. It is suggested that such effects may be largely eliminated by using lunar-based rather than earth-based satellite construction materials.

Curtis, S. A.↗

NASA NTRS1979

Prosthesis coupling

A coupling for use in an apparatus for connecting a prosthesis to the bone of a stump of an amputated limb is described which permits a bio-compatible carbon sleeve forming a part of the prosthesis connector to float so as to prevent disturbing the skin seal around the carbon sleeve. The coupling includes a flexible member interposed between a socket that is inserted within an intermedullary cavity of the bone and the sleeve. A lock pin is carried by the prosthesis and has a stem portion which is adapted to be coaxially disposed and slideably within the tubular female socket for securing the prosthesis to the stump. The skin around the percutaneous carbon sleeve is able to move as a result of the flexing coupling so as to reduce stresses caused by changes in the stump shape and/or movement between the bone and the flesh portion of the stump.

Reswick, J. B.↗