SEARCH · Engineering Papers

Results for “solvent extraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

All sources NASA NTRS DOE OSTI

DOE OSTI2025

Techno-Economic Analysis and Life Cycle Assessment for the Separation of 2,3-Butanediol from Fermentation Broth Using Liquid–Liquid Extraction

It is energy-intensive to separate dilute 2,3-butanediol (2,3-BDO) (<10 wt %) from the aqueous phase of fermentation broth for sustainable aviation fuel (SAF) using conventional distillation. Liquid–liquid extraction (LLE) using oleyl alcohol as a solvent in a membrane extractor to extract BDO from water can significantly reduce the energy cost and minimize the potential emulsion. In an Aspen Plus model simulation, 95.2% BDO recovery and 97.1% BDO purity have been achieved using this LLE method with solvent recovery and heat integration. Here, the thermal energy cost was estimated to be 4.57 MJ/kg BDO, which is only about 16.8% of the lower heating value (LHV) of the BDO. This method consumes 81% less energy than the cascade distillation and reduces about $0.46/GGE (gasoline gallon equivalent) to the minimal fuel selling price. Meanwhile, the greenhouse gas (GHG) emission is 62% lower than petroleum-based jet fuel production and 34% less than using the cascade distillation.

09 BIOMASS FUELS↗

DOE OSTI2026

Tuning the Solvation and Solubility Properties of Molecularly Heterogeneous Nonionic Deep Eutectic Solvents via Interface Organization

Common separation techniques, such as liquid− liquid extraction, are usually used for extractions and purifications due to their industrial scalability and affordability. However, these well-established practices are hindered by low selectivity and challenges in recovering solutes and solvents. Deep eutectic solvents (DES), a fairly new type of solvent, have the potential to overcome these issues. DESs are binary mixtures whose physical properties can be tuned by selecting the appropriate precursors to facilitate and/or enhance processes such as extraction. A promising DES for selective separations is formed when lauric acid (LA) is mixed with N-methylacetamide (NMA). This LA-NMA DES has a heterogeneous microscopic structure that can solvate compounds with completely different polarities. This study explores how forming an organized structure on the mesoscale affects the solubility of nonpolar solutes in nonionic DESs. To this end, the molecular and mesoscale structures and their effect on the solubility and solvation properties are evaluated for the LA-NMA DES and two new DESs with slight chemical variations in their precursors. It is observed that the organization of the nonpolar DES domains and, consequently, of their interfaces directly relates to the solubility of nonpolar compounds. Specifically, correctly selecting the DES precursors that form organized nonpolar domains leads to an organized interface in which the nonpolar solutes are solvated, thereby increasing the solubility. Additionally, enhanced dissolution power was observed in a completely different DES with mesoscale order in its molecular structure and composed of menthol and lauric acid. The latter result further validates the proposed tunability of the DES dissolution power through organized interfaces, extending it beyond a specific DES family and opening the possibility of new extraction-tailored designer solvents.

Extraction↗

NASA NTRS1986

Infusion extractor

This invention relates to an apparatus and method of removing desirable constituents from an infusible material by infusion extraction. A piston operating in a first chamber draws a solvent into the first chamber where it may be heated, and then moves the heated solvent into a second chamber containing the infusible material, where infusion extraction takes place. The piston then moves the solvent containing the extract through a filter into the first chamber, leaving the extraction residue in the second chamber. The method is applicable to operation in low or micro-gravity environments.

Chang-Diaz, Franklin R.↗

DOE OSTI2026

Calculation of monomer yields, verification of PG concentration approximation, catalyst comparison for neat aromatic RCF, SEM micrographs for postreaction pulps, yields of aqueous-phase sugar derivatives after PG-H2O RCF, reactor pressure transients, GPC comparing pre- and postreaction organic solvent composition, PG-H2O miscibility testing, GPC probing dimer/oligomer fractionation in PG-H2O mixtures for

Reductive catalytic fractionation (RCF) is an effective lignin-first biorefining method to extract lignin as a stabilized oil from lignocellulosic biomass. To realize RCF at scale, process modeling has shown that minimizing the use of exogenous organic solvents is critical. To this end, here we investigate the ability of lignin-derived monomers to act as either solvents or cosolvents for RCF. We begin by examining the influence of lignin-derived aromatic compounds (4-propylguaiacol, 4-propylphenol, and propylbenzene) on RCF monomer yields and subsequently extend our analysis to mixtures of 4-propylguaiacol and either methanol or water. We demonstrate that 4-propylguaiacol is an effective solvent for lignin extraction and depolymerization during RCF, especially when used in combination with water as a cosolvent. Cosolvent mixtures of 4-propylguaiacol and water enable up to 81% lignin extraction, monomer yields up to 25 wt %, and postreaction phase separation. However, unlike methanol, water as a cosolvent fails to inhibit aromatic ring hydrogenation when conducted over Ru/C as a catalyst, potentially leading to excess hydrogen consumption in a process utilizing this approach. Nonetheless, these results suggest a promising strategy for eliminating external organic solvents from RCF by utilizing mixtures of lignin-derived compounds and water as alternative extraction solvents.

biorefining↗

DOE OSTI2020

Spent-fuel recycling molecule degradation product standards can be produced with preparative liquid chromatography

Solvent systems used for spent nuclear fuel separation schemes are subject to intense radiation fields from the spent fuel, resulting in a degradation of separation performance over time from both the radiolytic destruction of active compounds (extractants, holdback agents, etc.) and the production of degradation compounds (compounds produced from the destruction of the active compounds). Development of a quantitative understanding of the effects of radiolysis on separations is impeded by a near-complete lack of availability of degradation products from chemical manufacturers. Synthesis of these degradation products through traditional means is both cost and time prohibitive, inhibiting advancement of new fuel separation processes. We hypothesize that comprehensive sets of degradation products can be synthesized using preparative radiolysis, and purified using high performance liquid chromatography in quantities sufficient for unequivocal identification and subsequent use as quantitative analytical studies. Achieving this objective will facilitate development of a much more accurate understanding of radiolysis reactions and their effects on solvent extraction processes, positioning Idaho National Laboratory (INL) in a leadership role in the science of fuel cycle separations. We propose producing these degradation compounds by irradiating concentrated samples of solvent ligands in the INL gamma irradiator, separating the resulting mixture with preparative chromatography, and removing the mobile phase in the separated fractions with a vacuum concentrator. This will yield milligram to gram quantities of purified degradation products, sufficient for fundamental research, at a fraction of the time and cost of synthesis. Facile production of separation molecule degradation products at minimal cost will enable the fundamental research that will accelerate the development of fuel cycles that will ensure the competitiveness of nuclear energy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

NASA NTRS1989

Method of infusion extraction

Apparatus and method of removing desirable constituents from an infusible material by infusion extraction, where a piston operating in a first chamber draws a solvent into the first chamber where it may be heated, and then moves the heated solvent into a second chamber containing the infusible material, and where infusion extraction takes place. The piston then moves the solvent containing the extract through a filter into the first chamber, leaving the extraction residue in the second chamber.

Chang-Diaz, Franklin R.↗

NASA NTRS1988

Infusion Extractor

Chang-Diaz, Franklin R.↗

DOE OSTI2024

Investigating the Impacts of Direct Dissolution Conditions on the Radiolytic Longevity of Butyramide Extractants

Removing the nitric acid (HNO3) dissolution step in used nuclear fuel (UNF) reprocessing would reduce the volume of radioactive waste streams generated, thereby, improving process efficiency. A promising strategy for this is the direct dissolution of UNF that has been pretreated by voloxidation into an organic solvent composed of specialized extractants and diluent. However, removal of the aqueous HNO3 phase from the envisioned reprocessing system has the potential to drastically change the suite of radiation-induced processes occurring, and thus, alter the longevity of proposed reagents. Furthermore, the impacts of fission product and transuranic metal ion complexation on the aforementioned radiation-induced processes is poorly understood, and yet can cause significant changes in radiolytic longevity. To bridge these knowledge gaps and support the continued development of direct dissolution strategies, we present an investigation into the impacts of direct dissolution conditions on the gamma radiation-induced degradation of N,N-di-(2-ethylhexyl) butyramide (DEHBA) and N,N-di-(2-ethylhexyl)isobutyramide (DEHiBA) ligands—candidate replacements for tributyl phosphate—in pre-equilibrated n-dodecane solvent in the presence and absence of envisioned loading amounts of uranium.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

DOE OSTI2020

Hydrophobic amine-based binary mixtures of active pharmaceutical and food grade ingredients: characterization and application in indium extraction from aqueous hydrochloric acid media

The wide spread use of hazardous and expensive solvents for the liquid-liquid extraction (LLE) of critical metals has been a growing source of waste in the metal refinement industry. We have developed and characterized room temperature liquid hydrophobic binary mixtures based on common pharmaceutical and food grade compounds as sustainable, cost effective alternatives to both ionic liquids and conventional solvents. Additionally, we introduce liquid mixtures with Proton Sponge® (1,8-bis(dimethylamino)naphthalene), one of the strongest known organic bases. These mixtures have been applied to the LLE of indium(III) ions from hydrochloric acid solutions, displaying an extraction efficiency greater than 99% in some systems. Here, a systematic approach to identifying the underlying mechanism of extraction, in particular relating to the charge, solubility, and complexation of the indium species in the organic phase has been developed.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

NASA NTRS2001

Development of a Supported Emulsion Liquid Membrane System for Propionic Acid Separation in a Microgravity Environment

Perstractive fermentation is a good way to increase the productivity of bioreactors. Using Propionibacteria as the model system, the feasibility of using supported emulsion liquid membrane (SELM) for perstractive fermentation is assessed in this study. Five industrial solvents were considered as the solvent for preparing the SELM. The more polar a solvent is, the higher the partition coefficient. However, toxicity of a solvent also increases with its polarity. CO-1055 (industrial decanol/octanol blend) has the highest partition coefficient toward propionic acid among the solvents that has no molecular toxicity toward Propionibacteria. A preliminary extraction study was conducted using tetradecane as solvent in a hydrophobic hollow fiber contactor. The result confirmed that SELM eliminates the equilibrium limitation of conventional liquid-liquid extraction, and allows the use of a non-toxic solvent with low partition coefficient.

Li, Jin↗

DOE OSTI2022

Integrated CO 2 -facilitated Hydrometallurgical and Electrochemical Technology for Sustainable Mining and Recovery of Critical Elements from Wastes and Ashes

The availability of critical materials and other metals is very important for our national security and economic growth since they are widely used in defense and energy applications including batteries and wind turbines. Unfortunately, high grade ores have become scarce and their productions is dominated by limited countries. Thus, there is a strong need to obtain these materials from domestic sources. Municipal wastes are great candidates since they often contain high concentrations of metals. Since the metals in wastes and waste ashes are not in the form found in natural ores and contain a wide range of impurities, conventional extraction processes would not be effective. Thus, our project has developed an innovative MIDAS process based on the integrated CO2-facilitated hydrometallurgical and electrochemical technology that can effectively recover critical materials and metals from waste ashes while minimizing the environmental impacts. We have (i) characterized waste ashes to understand their physico-chemical properties, (ii) developed green solvent systems for hydrometallurgical extraction of critical elements and metals from waste ashes, (iii) explored electrochemical interfaces to refine the extracted metals.

54 ENVIRONMENTAL SCIENCES↗

NASA NTRS2016

Polyimide Aerogels with Three-Dimensional Cross-Linked Structure

A method for creating a three dimensional cross-linked polyimide structure includes dissolving a diamine, a dianhydride, and a triamine in a solvent, imidizing a polyamic acid gel by heating the gel, extracting the gel in a second solvent, supercritically drying the gel, and removing the solvent to create a polyimide aerogel.

Meador, Mary Ann B.↗

DOE OSTI2025

Mechanically and Chemically Robust Lanmodulin-Functionalized Silk Sponges for Rare Earth Element Sequestration

The extraction of rare-earth elements (REEs) from low-grade sources like electronic waste (E-waste) could supplement current unsustainable mining practices. REEs are crucial for various industries, but supply struggles to meet growing demand. Herein, we present an environmentally friendly method for REE extraction using silk protein sponges functionalized with lanmodulin (LanM), a protein that selectively binds REEs. These sponges are relatively facile to fabricate and scale, while offering highly selective REE binding. The REEs can then be recovered via simple acid leaching, allowing sponge reuse for multiple cycles as well as specific desorption of different REEs by changing the pH of the desorption buffer. Finally, this method avoids harmful solvents used in traditional extraction and enables recycling of REEs from industrial and E-waste.

REEs↗

DOE OSTI2025

Multi-scale computational screening and mechanistic insights of cyclic amines as solvents for improved lignocellulosic biomass processing

A computational screening workflow for the efficient deconstruction of cellulose, lignin and hemicellulose fractions of lignocellulosic biomass using cyclic amines as solvents. Lignocellulosic biomass is a promising feedstock for production of affordable fuels and chemicals from renewable resources. Effective solubilization and subsequent deconstruction of its cellulose, hemicellulose, and lignin fractions is essential for the viability of future biorefineries. This study used quantum chemistry-based equilibrium thermodynamics methods to evaluate the potential of 650 cyclic amines to solubilize cellulose, hemicellulose, and lignin. The activity coefficients of solvent - biopolymer interactions were predicted using the COSMO-RS (COnductor-like Screening MOdel for Real Solvents) method and used to identify cyclic amines that can efficiently dissolve and extract selective fractions of biopolymers during biomass pretreatment. Among the 650 cyclic amines, 1-piperazineethanmaine was predicted to be an effective solvent for extracting all three polymers and was experimentally shown to achieve the highest lignin removal (97.1%). Non-covalent interaction, reduced density gradient and quantum chemical calculations were performed to elucidate the dissolution mechanism of lignin, cellulose and hemicellulose and gain further molecular level insights into the interactions between the cyclic amines and biomass polymers that promote efficient solubilization and extraction. These analyses indicated that 1-piperazineethanmaine and 1-methylimidazole make noncovalent van der Waals, electrostatic interactions and hydrogen bonding with lignin, leading to enhanced lignin removal, while the strong intramolecular hydrogen bonding interactions in cellulose and hemicellulose result in weaker solvent-biopolymer interactions. Overall, the computational approach provided an efficient method for identifying cyclic amines tailored for optimal biomass pretreatment and resulted in the identification of a potential new class of solvents for effective biomass pretreatment.

Kumar, Nikhil↗

DOE OSTI2021

Direct Uranium Isotopic Analysis of Swipe Surfaces by Microextraction-ICP-MS

The ability to directly measure uranium isotope ratios on environmental swipes has been achieved through a solution-based microextraction process and represents a significant advancement toward the development of a rapid method to analyze international nuclear safeguard samples. Here, a microextraction probe is lowered and sealed onto the swipe surface, and analytes within the sampling site (~8 mm2) are dissolved and extracted into a flowing solvent of 2% nitric acid (HNO 3 ). The mobilized species are subsequently directed into an inductively coupled plasma-mass spectrometer (ICP-MS) for accurate and precise isotope ratio determination. This work highlights the novelty of the sampling mechanism, particularly with the direct coupling of the microextraction probe to the ICP-MS and measurement of uranium isotope ratios. The preliminary method detection limit for the microextraction-ICP-MS method, utilizing a quadrupole-based MS, was determined to be ~50 pg of 238 U. Additionally, precise and accurate isotope ratio measurements were achieved on uranium reference materials for both the major ( 235 U/ 238 U) and minor ( 234 U/ 238 U and 236 U/ 238 U) ratios. While the present work is focused on directly measuring uranium isotopic systems on swipe surfaces for nuclear safeguards and verification applications, the benefits would extend across many applications in which direct solid sampling is sought for elemental and isotopic analysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2024

Electrically Powered High-Salinity Brine Separation Using Dimethyl Ether

Dewatering highly saline aqueous streams, from mining and geothermal leachates to industrial wastewater, is essential for effective resource recovery and safe disposal. Membraneless water extraction (MWE) uses a low-polarity solvent to separate water from concentrated aqueous solutions. In this study, we design a new MWE that uses dimethyl ether (DME) to selectively extract water from high-salinity brines, leveraging the volatility of DME to achieve rapid solvent recovery. By separating water and dissolved salts at a liquid–liquid interface, MWE minimizes the deleterious effects of scaling on vulnerable membrane and heat exchanger surfaces, reducing the need for extensive pretreatment and expensive materials. We begin by developing a computational framework for a multistage counterflow liquid–liquid contactor, which extracts water into DME, coupled with a multistage solvent regenerator that uses vapor compression to efficiently separate the desalinated water from the DME extractant. Excess Gibbs free energy and equation of state frameworks are used to model fluid phase equilibria in water–DME–sodium chloride (NaCl) mixtures, with interaction parameters estimated from experimental data. Incorporating equilibrium calculations into a system-scale computational model, we examine the performance of MWE using DME for the first time. Our analysis demonstrates that MWE can concentrate seawater desalination brine (>1.0 mol NaCl kg –1 ) to zero-liquid discharge salinities, with an energy consumption of under 50 kW h per m 3 of water extracted with a solvent recovery ratio greater than 99.9%. We highlight the importance of staging the vapor compression process to simultaneously minimize energy consumption while enabling brine concentration and product water solvent contamination. Finally, the thermodynamic framework developed here allows for the robust evaluation of new MWE solvents and systems for critical brine concentration and fractional precipitation applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

Identification and quantification of lignin monomers and oligomers from reductive catalytic fractionation of pine wood with GC × GC – FID/MS

Thorough lignin characterization is vital to understand the physicochemical properties of lignin and to evaluate lignocellulose biorefinery processes. In this study, an in-depth characterization of lignin oil, obtained from reductive catalytic fractionation (RCF) of pine wood, was performed with quantitative GC × GC – FID analysis and qualitative GC × GC – MS. By utilizing high-temperature resistant column sets in the GC × GC system and by applying a derivatization step, unambiguous detection of lignin monomers, dimers, and trimers is enabled. In addition to confirm the identity of eleven monomers, corresponding to 34 wt% of the RCF lignin oil, thirty-six dimers (16 wt%) and twenty-one trimers (7 wt%) were comprehensively identified by analysis of their mass spectra and quantified by a FID, encompassing the identity of an additional 23 wt% of the RCF lignin oil. The proposed structures reveal the interlinkages present in the dimeric and trimeric oligomers, containing β-5, β-1, β–β, 5–5, and a minor fraction of β-O-4 and 4-O-5 bonds. Furthermore, aliphatic end-units in the dimeric and trimeric molecules were identified, consisting of various substituents at the C4 position, that have been previously observed in the RCF-derived lignin monomers. To reduce complexity for analysis, the RCF oil was separated into six fractions, prior to analysis. The structural motifs (inter-unit linkages and end-units) that are found in the different fractions vary significantly, such that the lignin fractions extracted in more polar solvents contained higher molecular weight fragments and more hydroxyl containing structural motifs. Additionally, the identified structures of individual dimer and trimer molecules by GC × GC align well with and further complement the recent findings from 1 H– 13 C HSQC NMR spectroscopy, demonstrating complementarity between both 2D techniques to obtain a holistic view on both the molecular structures and the distribution of bonds and end-units in RCF oil. The combination of these two techniques provides a powerful tool for future RCF and other lignin depolymerization research.

09 BIOMASS FUELS↗

NASA NTRS1985

Collection and analysis of NASA clean room air samples

The environment of the HALOE assembly clean room at NASA Langley Research Center is analyzed to determine the background levels of airborne organic compounds. Sampling is accomplished by pumping the clean room air through absorbing cartridges. For volatile organics, cartridges are thermally desorbed and then analyzed by gas chromatography and mass spectrometry, compounds are identified by searching the EPA/NIH data base using an interactive operator INCOS computer search algorithm. For semivolatile organics, cartridges are solvent entracted and concentrated extracts are analyzed by gas chromatography-electron capture detection, compound identification is made by matching gas chromatogram retention times with known standards. The detection limits for the semivolatile organics are; 0.89 ng cu m for dioctylphlhalate (DOP) and 1.6 ng cu m for polychlorinated biphenyls (PCB). The detection limit for volatile organics ranges from 1 to 50 parts per trillion. Only trace quantities of organics are detected, the DOP levels do not exceed 2.5 ng cu m and the PCB levels do not exceed 454 ng cu m.

Sheldon, L. S.↗