Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “solution verification”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24
All sourcesNASA NTRSDOE OSTI
NASA NTRS2015

Second-Moment RANS Model Verification and Validation Using the Turbulence Modeling Resource Website (Invited)

The implementation of the SSG/LRR-omega differential Reynolds stress model into the NASA flow solvers CFL3D and FUN3D and the DLR flow solver TAU is verified by studying the grid convergence of the solution of three different test cases from the Turbulence Modeling Resource Website. The model's predictive capabilities are assessed based on four basic and four extended validation cases also provided on this website, involving attached and separated boundary layer flows, effects of streamline curvature and secondary flow. Simulation results are compared against experimental data and predictions by the eddy-viscosity models of Spalart-Allmaras (SA) and Menter's Shear Stress Transport (SST).

Eisfeld, Bernhard↗
DOE OSTI2023

Collaboration and Negotiation

Collaboration and Negotiation is a critical high-level function of an Autonomous Intelligent Cyber-Defense Agent (AICA) that enables communication among agents, central cyber C2, and human operators. Maintaining the Confidentiality, Integrity, and Availability (CIA) triad while achieving mission goals requires stealthy AICA agents to exercise: 1) minimal communication as needed for avoiding detection, 2) verification of information received with possibly limited resources, and 3) active learning during operations to address dynamic conditions. Moreover, negotiations to jointly identify and execute a Course of Action (COA) solution will require building consensus under distributed and/or decentralized multiagent settings with information uncertainties. This chapter presents algorithmic approaches for enabling the collaboration and negotiation function. Strengths and limitations of potential techniques are identified, and a representative example is illustrated. Recommendations for future development are also discussed.

Chatterjee, Samrat↗
DOE OSTI2023

Atomistic simulations and machine learning of solute grain boundary segregation in Mg alloys at finite temperatures

Understanding solute segregation thermodynamics is the first step in investigating grain boundary (GB) properties, such as strong yttrium (Y) effects on grain growth and texture evolution in micro-scale polycrystalline magnesium (Mg) alloys. To estimate the average GB segregation behavior in low-solute-concentration Mg alloys (e.g., 2 at.% Y), a state-of-the-art spectral approach is applied based on a per-site segregation energy spectrum for Y solute atoms at zero K obtained from molecular statistics (MS) simulations of ~10 4 GB sites in Mg symmetric tilt GBs (STGBs). Although selected MS simulation results are consistent with verification by density functional theory (DFT) calculations, estimates of average segregation tendency based on the zero-K energy spectrum deviate from experimental observations. To resolve this problem, thermodynamic integration (TI) methods based on molecular dynamics (MD) simulations are used to determine the per-site segregation free energies of Y at representative GB sites, which show contributions beyond harmonic approximations can be important for certain GB sites at high temperatures. A surrogate model of per-site segregation free energy is constructed from a small set of TI data points using stacking cross-validation regressors and physics-informed descriptors. This model is applied to predict the Y segregation free energy spectra for thousands of GB sites in Mg STGBs with uncertainty quantification. Finally, the average segregation tendency predicted by the spectral approach based on the free energy spectra agrees well (within the uncertainty range) with experimental observations for micro-scale polycrystalline Mg alloys at typical thermomechanical processing temperatures (500 ~ 800 K), where thermodynamic equilibrium states are likely to be achieved due to fast diffusion.

Atomistic simulations↗
DOE OSTI2021

Implementation of Plot File Testing in the DYNA3D/ParaDyn Software Quality Assurance Suite

Automated testing of DYNA3D/ParaDyn plot files was added to the DYNA3D/ParaDyn software quality assurance (SQA) test suite. The new capability extracts select data from the plot files generated during each verification run and compares it to the same baseline answers used to verify the problem. Deviations between baseline answers and plot file values are reported in the same manner as solution discrepancies, and differences in precision levels between the baseline answers and plot file results are accounted for. The new testing leverages the existing SQA test suite framework and test problems and the Python Mili reader and minimally increases the overall run time (< 5%) of the SQA test suite. This new capability provides incremental end-toend testing of the most common DYNA3D/ParaDyn simulation workflows.

42 ENGINEERING↗
NASA NTRS1989

Sonic-point capturing

A prototype scheme that produces perfectly smooth transonic solutions to nozzle-flow problems is derived and tested. The basic upwind scheme is described as well as satisfying the entropy condition, treatment of the source term, and numerical verification. The analysis yielded a numerical flux function for use near a sonic point, which is based on a full model of a transonic expansion wave, and a matched treatment for the source term.

Van Leer, Bram↗
NASA NTRS1990

Models of space averaged energetics of plates

The analysis of high frequency vibrations in plates is of particular interest in the study of structure borne noise in aircrafts. The current methods of analysis are either too expensive (finite element method) or may have a confidence band wider than desirable (Statistical Energy Analysis). An alternative technique to model the space and time averaged response of structural acoustics problems with enough detail to include all significant mechanisms of energy generation, transmission, and absorption is highly desirable. The focus of this paper is the development of a set of equations which govern the space and time averaged energy density in plates. To solve this equation, a new type of boundary value problem must be treated in terms of energy density variables using energy and intensity boundary conditions. A computer simulation verification study of the energy governing equation is performed. A finite element formulation of the new equations is also implemented and several test cases are analyzed and compared to analytical solutions.

Bouthier, O. M.↗
NASA NTRS2006

Compositional Pathways and Capillary Effects during Early-stage Isothermal Precipitation in a Nondilute Ni-Al-Cr Alloy

For a Ni-5.2 Al-14.2 Cr at.% alloy with moderate solute supersaturations, the compositional pathways, as measured with atom-probe tomography, during early to later stage y'(LI2)-precipitation (R = 0.45-10 nm), aged at 873 K, are discussed in light of a multi-component coarsening model. Employing nondilute thermodynamics, detailed model analyses during quasistationary coarsening of the experimental data establish that the y/y' interfacial free-energy is 22- 23+/-7 mJ/sq m. Additionally, solute diffusivities are significantly slower than model estimates. Strong quantitative evidence indicates that an observed y'-supersaturation of Al results from the Gibbs-Thomson effect, providing the first experimental verification of this phenomenon. The Gibbs-Thomson relationship, for a ternary system, as well as differences in measured phase equilibria with CALPHAD assessments, are considered in great detail.

Sudbrack, Chantal K.↗
NASA NTRS2018

Tagging Components in the Test Complex Area

Why tag components differently? - Various methods are in place to tag different components, but not every component is tracked; - Variance in method can make it difficult to obtain component information and identify discrepancies; -Time and resources are spent on component localization and verification. Previous work of RA10 interns: - Researching more efficient asset tracking methods; - Investigating cost effective ways to localize components; - Past interns identified using QR (Quick Response) codes as a potential solution. Link QR codes to Windchill (PLM - Product Lifecycle Management system) DDMS (Design and Data Management System) after QR code is printed/etched and physically tagging it as quickly as possible

Gomez, Sarah↗
NASA NTRSDate not supplied

High-Fidelity CFD Verification Workshop 2024: Spalart-Allmaras QCR2000-R Turbulence Model

This is an invited paper for the SciTech 2023 special session, High-Fidelity CFD Verification Pre-Workshop. The paper presents three benchmark cases for verification of Reynolds-averaged Navier-Stokes solvers. The verification studies focus on a one-equation Spalart-Allmaras model, SA-neg-QCR2000-R. The benchmark cases are a two-dimensional subsonic flow around a Joukowski airfoil, a subsonic three-dimensional flow around an extruded NACA0012 wing in a tunnel, and a subsonic flow around a wing-body configuration developed by Boeing for verification of solvers participating in the High-Lift Prediction Workshop. The turbulence-model formulation, geometry, flow conditions, grids, and the desired submission data are described in detail. Reference solutions computed by established codes are shown.

CFD↗
NASA NTRS2005

Verification and Validation of the RAGE Hydrocode in Preparation for Investigation of Impacts into a Volatile-rich Target

Before a hydrocode is used to investigate a question of scientific interest, it should be tested against analogous laboratory experiments and problems with analytical solutions. The Radiation Adaptive Grid Eulerian (RAGE) hydrocode[1], developed by Los Alamos National Laboratory (LANL) and Science Applications International Corporation (SAIC)[2,3] has been subjected to many tests during its development.[4,5] We extend and review this work, emphasizing tests relevant to impact cratering into volatile-rich targets.

Plesko, C. S.↗
DOE OSTI2021

Midfidelity Model Verification for a Point-Absorbing Wave Energy Converter with Linear Power Takeoff: Preprint

In the preliminary design stage of a wave energy converter (WEC), fast and reliable simulation tools are required. High-fidelity numerical models are usually employed to study the wave-structure interaction, yet the computational cost is demanding. Instead, mid-fidelity models provide simulations in the order of real time. In this study, Uppsala University WEC operates in a relatively mild sea state and is modeled using WEC-Sim. The model is verified based on OpenFOAM simulations. To analyze the ability of mid-fidelity model to capture the WEC dynamics, the system is investigated separately in 1, 2 and 3 DoF. The contribution of viscous phenomena is examined. Moreover, linear and weakly non-linear solutions provided by WEC-Sim are studied. The results obtained indicate that the viscous effects in heave and surge motion can be neglected but not for the pitch. The weakly non-linear WEC-Sim solution successfully agrees with the CFD, whereas the linear solution could drive to misleading results.

CFD↗
DOE OSTI2023

Requirements Description of EvaluateFlux

This report presents the modeling and simulation capabilities of Argonne National Laboratory’s EvaluateFlux code [1] that is used in present reactor analysis activities. These capabilities will then be used to establish the set of EvaluateFlux verification tasks necessary to verify EvaluateFlux for usage on commercial projects. A similar approach was taken for the PERSENT, REBUS and DIF3D software packages. The EvaluateFlux program is a post-processing utility program for DIF3D, specifically DIF3D-VARIANT. As covered in [1], the EvaluateFlux program was built to allow users to obtain flux and power traverses through the domain. Its primary purpose was to facilitate foil analysis by evaluating the flux solution from DIF3D-VARIANT and combining it with foil cross section data. The outputs from EvaluateFlux are contained in four possible output files: FluxAndRegionRR.out, IsotopeMicroRR.out, LabeledRegionRR.out, and IsotopeMacroRR.out. Each file is focused on using the flux evaluate and cross section data in a different manner and all are covered in this verification process.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
NASA NTRS1993

Finite element analysis of the Space Shuttle Main Engine (SSME) alternate turbopump development (ATD) high pressure oxydizer turbopump (HPOTP)

A 3D model of all stationary components of the ATD HPOTP is analyzed using a superelement solution technique to obtain a better understanding of the pump behavior and to support pump testing. Emphasis is place on the methods used for determining deflections. As part of the model verification, analyses were conducted on the main housing model under proof-pressure and push-test loading conditions. The analysis at 109 percent rate power level resulted in asymmetric deformation patterns which were used to calculate operating and rub clearances. The present analysis is considered to provide the most realistic representation of the ATD HPOTP to date.

Ham-Battista, G. L.↗
NASA NTRS1995

Concurrent engineering research center

The projects undertaken by The Concurrent Engineering Research Center (CERC) at West Virginia University are reported and summarized. CERC's participation in the Department of Defense's Defense Advanced Research Project relating to technology needed to improve the product development process is described, particularly in the area of advanced weapon systems. The efforts committed to improving collaboration among the diverse and distributed health care providers are reported, along with the research activities for NASA in Independent Software Verification and Validation. CERC also takes part in the electronic respirator certification initiated by The National Institute for Occupational Safety and Health, as well as in the efforts to find a solution to the problem of producing environment-friendly end-products for product developers worldwide. The 3M Fiber Metal Matrix Composite Model Factory Program is discussed. CERC technologies, facilities,and personnel-related issues are described, along with its library and technical services and recent publications.

Callahan, John R.↗
NASA NTRS2015

Automated Test for NASA CFS

The core Flight System (cFS) is a flight software (FSW) product line developed by the Flight Software Systems Branch (FSSB) at NASA's Goddard Space Flight Center (GSFC). The cFS uses compile-time configuration parameters to implement variable requirements to enable portability across embedded computing platforms and to implement different end-user functional needs. The verification and validation of these requirements is proving to be a significant challenge. This paper describes the challenges facing the cFS and the results of a pilot effort to apply EXB Solution's testing approach to the cFS applications.

Flight software↗
DOE OSTI2022

Midfidelity model verification for a point-absorbing wave energy converter with linear power take-off

In the preliminary design stage of a wave energy converter (WEC), researchers need fast and reliable simulation tools. High-fidelity numerical models are usually employed to study the wave-structure interaction, but the computational cost is demanding. As an alternative, midfidelity models can provide simulations in the order of real time. In this study, we operate Uppsala University’s WEC in a relatively mild sea state and model it using WEC-Sim. The model is verified based on OpenFOAM simulations. To analyze the ability of the midfidelity model to capture WEC dynamics, we investigate the system separately with 1, 2, and 3 degrees of freedom. We examine the contribution of viscous phenomena, and study both linear and weakly nonlinear solutions provided by WEC-Sim. Our results indicate that the viscous effects can be neglected in heave and surge motion, but not for pitch. We also find that the weakly nonlinear WEC-Sim solution successfully agrees with the computational fluid dynamics, whereas the linear solution could suggest misleading results.

16 TIDAL AND WAVE POWER↗
DOE OSTI2021

Analytic quasi-steady evolution of marginally unstable kinetic plasma instabilities in the presence of drag and scattering

The 1D bump-on-tail problem is studied in order to determine the influence of drag on quasi-steady solutions near marginal stability (1-γ d /γ L << 1) when effective collisions are much larger than the instability growth rate (ν>>γ). In this common tokamak regime, it is rigorously shown that the paradigmatic Berk–Breizman cubic equation for the nonlinear mode evolution reduces to a much simpler differential equation, dubbed the time-local cubic equation, which can be solved directly. It is found that in addition to increasing the saturation amplitude, drag introduces a shift in the apparent oscillation frequency by modulating the saturated wave envelope. Furthermore, excellent agreement is found between the analytic solution for the mode evolution and both the numerically integrated Berk–Breizman cubic equation and fully nonlinear 1D Vlasov simulations. Experimentally isolating the contribution of drag to the saturated mode amplitude for verification purposes is explored but complicated by the reality that the amount of drag cannot be varied independently of other key parameters in realistic scenarios. While the influence of drag is modest when the ratio of effective drag to effective scattering α/ν is very small, it can become substantial when α/ν ≳ 0.5, suggesting that drag should be accounted for in quantitative models of fast-ion-driven instabilities in fusion plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1985

Full two-dimensional transient solutions of electrothermal aircraft blade deicing

Two finite difference methods are presented for the analysis of transient, two-dimensional responses of an electrothermal de-icer pad of an aircraft wing or blade with attached variable ice layer thickness. Both models employ a Crank-Nicholson iterative scheme, and use an enthalpy formulation to handle the phase change in the ice layer. The first technique makes use of a 'staircase' approach, fitting the irregular ice boundary with square computational cells. The second technique uses a body fitted coordinate transform, and maps the exact shape of the irregular boundary into a rectangular body, with uniformally square computational cells. The numerical solution takes place in the transformed plane. Initial results accounting for variable ice layer thickness are presented. Details of planned de-icing tests at NASA-Lewis, which will provide empirical verification for the above two methods, are also presented.

Masiulaniec, K. C.↗