Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “solid state physics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

Local Structural Investigation of SmFeAsO1−xFx High Temperature Superconductors

A strong revitalization of the field of high temperature superconductivity (HTSC) has been induced recently by the discovery of T{sub C} around 26 K in F-doped LaFeAsO iron pnictides. Starting from this discovery, a huge amount of experimental data have been accumulated. This important corpus of results will allow the development of suitable theoretical models aimed at describing the basic electronic structure properties and nature of superconducting states in these fascinating new systems. A close correlation between structural features and physical properties of the normal and superconducting states has already been demonstrated in the current literature. Advanced theoretical models are also based on the close correlation with structural properties and in particular with the Fe-As tetrahedral array. As for other complex materials, a deeper understanding of their structure-properties correlation requires a full knowledge of the atomic arrangement within the structure. Here we report an investigation of the local structure in the SmFeAsO{sub 1-x}F{sub x} system carried out by means of x-ray total scattering measurements and pair distribution function analysis. The results presented indicate that the local structure of these HTSC significantly differs from the average structure determined by means of traditional diffraction techniques, in particular the distribution of Fe-As bond lengths. In addition, a model for describing the observed discrepancies is presented.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Tuning Singlet and Triplet Excited State Energies and Frontier Orbitals of Imidazole Host/Emitter for Hybrid White OLEDs

In this work, we report hybrid fluorescent/phosphorescent WOLEDs employing blue fluorescent and green and red phosphorescent emitters doped into a host matrix. The fluorescent emitting dopant harnesses all electrically generated high energy singlet excitons for blue emission, and the phosphorescent dopants harvest the remainder of lower-energy triplet excitons for green and red emission. This design requires the singlet state (S1) of the host to be higher than the S1 of the fluorescent dopant so that the singlet excitons generated on the host are transferred to the fluorescent dopant. Furthermore, the triplet state (T1) of the host matrix should be lower than the T1 of the fluorescent dopant so the triplet excitons generated on the fluorescent dopant can be transferred to the host matrix which will then be transferred to the green and red phosphors. To develop a host material that can serve this purpose, we tune the electronic properties of phenanthro[9,10-d]imidazole by incorporating phenyl and/or pyridyl moieties at the N1 and C2 positions of phenanthro[9,10-d]imidazole. This substitution resulted in variety of host materials with different singlet/triplet energies, quantum efficiency and redox values. The resulting phenanthro[9,10-d]imidazoles are employed as host materials for fluorescent and phosphorescent dopants and as neat fluorescent emitters. Monochromatic devices with a fluorescent emitter and the phenanthro[9,10-d]imidazoles as host materials or as neat fluorescent emitter achieved near theoretical maximum efficiency. Finally, efficient three-color hybrid WOLEDs were fabricated using the phenanthro[9,10-d]imidazoles as hosts for a fluorescent dopant or as neat fluorescent emitters and host for green and red phosphors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthetic and spectroscopic studies of vanadate glaserites I: Upconversion studies of doubly co-doped (Er, Tm, or Ho):Yb:K{sub 3}Y(VO{sub 4}){sub 2}

The synthesis and upconversion properties of trigonal glaserite-type K{sub 3}Y(VO{sub 4}){sub 2} co-doped with Er{sup 3+}/Yb{sup 3+}, Ho{sup 3+}/Yb{sup 3+}, or Tm{sup 3+}/Yb{sup 3+} were studied. Powder samples were synthesized by solid state reactions at 1000 °C for 48 h, while well-formed hexagonal single crystals of the same were grown hydrothermally using 10 M K{sub 2}CO{sub 3} at 560–650 °C. Infrared-to-visible upconversion by Er{sup 3+}/Yb{sup 3+}, Ho{sup 3+}/Yb{sup 3+}, or Tm{sup 3+}/Yb{sup 3+} codoped-K{sub 3}Y(VO{sub 4}){sub 2} glaserite powder and single crystals was observed, and the upconversion spectral properties were studied as a function of different Er{sup 3+}, Tm{sup 3+}, Ho{sup 3+}, and Yb{sup 3+} ion concentrations. The process is observed under 980 nm laser diode excitation and leads to strong green (552 nm) and red (659 nm) emission for Er{sup 3+}/Yb{sup 3+}, green (549 nm) and red (664 nm) emission for Ho{sup 3+}/Yb{sup 3+}, and blue (475 nm) and red (647 nm) emission for Tm{sup 3+}/Yb{sup 3+}. The main mechanism that allows for up-conversion is attributed the energy transfer among Yb{sup 3+} and the various Er{sup 3+}/Ho{sup 3+}/Tm{sup 3+} ions in excited states. These results illustrate the large potential of co-doped alkali double vanadates for photonic applications involving optoelectronics devices. - Graphical abstract: Synthesis and upconversion in vanadate glaserites. - Highlights: • K{sub 3}Y(VO{sub 4}){sub 2} codoped with Er, Tm, or Ho:Yb were synthesized via solid-state and hydrothermal routes. • Upconversion properties are investigated. • The codoped compounds revealed efficient infrared-to-visible upconversion. • The presented compounds are potential host for solid state lighting.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Frequency reproducibility of solid-state thorium-229 nuclear clocks

Solid-state thorium-229 ( 229 Th) nuclear clocks are set to provide new opportunities for precision metrology and fundamental physics. Taking advantage of inherent low sensitivity of a nuclear transition to its environment, orders of magnitude more emitters can be hosted in a solid-state crystal compared with current optical lattice atomic clocks. Furthermore, solid-state systems needing only simple thermal control are key to the development of field-deployable compact clocks. Here we explore and characterize the frequency reproducibility of the 229 Th:CaF 2 nuclear clock transition, a key performance metric for all clocks. We measure the transition linewidth and centre frequency as a function of the doping concentration, temperature and time. We report the concentration-dependent inhomogeneous linewidth of the nuclear transition, limited by the intrinsic host crystal properties. We determine an optimal working temperature for the 229 Th:CaF 2 nuclear clock at 196(5) K, at which the first-order thermal sensitivity vanishes. This would enable in situ temperature co-sensing using different quadrupole-split lines, reducing the temperature-induced systematic shift below the 10 −18 fractional frequency uncertainty level. At 195 K, the reproducibility of the nuclear transition frequency is 220 Hz (fractionally 1.1 × 10 −13 ) for two differently doped 229 Th:CaF 2 crystals over 7 months. Furthermore, these results form the foundation for understanding, controlling and harnessing the coherent nuclear excitation of 229 Th in solid-state hosts and for their applications in constraining temporal variations of fundamental constants.

Atomic and molecular physics↗

Controlled Growth and Chemical Engineering of FeSe‐Based Superconducting Films

Abstract Chemical engineering tailors functional materials to meet the demands of physical and chemical properties, accelerating materials discovery and design in a multidisciplinary field. However, stereotyped synthetic paradigms in physical and chemical approaches obstruct the effective integration of multiple advantages of respective materials exploration methods. Solid state reaction is often considered separately with wet chemistry synthesis route, such as film growth using physical vapor deposition and hydrothermal methods. Here, the controlled growth of FeSe thin films by physical deposition techniques followed by the chemical engineering to create heterogenous interface in FeSe films via a solution‐based environment is demonstrated. The two‐step route allows an expanded crystal structure and enhanced superconducting transition temperature from 3.6 to 38 K, providing a new strategy to design functional hybrid materials.

Huang, Yulong↗

Implementation of a thermomechanical model for the simulation of selective laser melting

Selective laser melting (SLM) is an additive manufacturing process in which multiple, successive layers of metal powders are heated via laser in order to build a part. Modeling of SLM requires consideration of both heat transfer and solid mechanics. The present work describes continuum modeling of SLM as envisioned for eventual support of part-scale modeling of this fabrication process to determine end-state information such as residual stresses and distortion. The determination of the evolving temperatures is dependent on the material, the state of the material (powder or solid), the specified heating, and the configuration. Similarly, the current configuration is dependent on the temperatures, the powder-solid state, and the constitutive models. A multi-physics numerical formulation is required to solve such problems. This article describes the problem formulation, numerical method, and constitutive parameters necessary to solve such a problem. Additionally, various verification and example problems are simulated in the parallel, multi-physics finite element code Diablo, and the results presented herein.

42 ENGINEERING↗

High field magnetometry with hyperpolarized nuclear spins

Abstract Quantum sensors have attracted broad interest in the quest towards sub-micronscale NMR spectroscopy. Such sensors predominantly operate at low magnetic fields. Instead, however, for high resolution spectroscopy, the high-field regime is naturally advantageous because it allows high absolute chemical shift discrimination. Here we demonstrate a high-field spin magnetometer constructed from an ensemble of hyperpolarized 13 C nuclear spins in diamond. They are initialized by Nitrogen Vacancy (NV) centers and protected along a transverse Bloch sphere axis for minute-long periods. When exposed to a time-varying (AC) magnetic field, they undergo secondary precessions that carry an imprint of its frequency and amplitude. For quantum sensing at 7T, we demonstrate detection bandwidth up to 7 kHz, a spectral resolution < 100mHz, and single-shot sensitivity of 410pT $$/\sqrt{{{{{{{{\rm{Hz}}}}}}}}}$$ / Hz . This work anticipates opportunities for microscale NMR chemical sensors constructed from hyperpolarized nanodiamonds and suggests applications of dynamic nuclear polarization (DNP) in quantum sensing.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Spin waves and spin-state transitions in a ruthenate high-temperature antiferromagnet

Ruthenium compounds serve as a platform for fundamental concepts such as spin-triplet superconductivity, Kitaev spin liquids and solid-state analogues of the Higgs mode in particle physics. However, basic questions about the electronic structure of ruthenates remain unanswered, because several key parameters (including Hund’s coupling, spin–orbit coupling and exchange interactions) are comparable in magnitude and their interplay is poorly understood, partly due to difficulties in synthesizing large single crystals for spectroscopic experiments. Here we introduce a resonant inelastic X-ray scattering (RIXS) technique capable of probing collective modes in microcrystals of 4d electron materials. We observe spin waves and spin-state transitions in the honeycomb antiferromagnet SrRu 2 O 6 (ref. 10) and use the extracted exchange interactions and measured magnon gap to explain its high Néel temperature. We expect that the RIXS method presented here will enable momentum-resolved spectroscopy of a large class of 4d transition-metal compounds.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Neutron detection performance of gallium nitride based semiconductors

Neutron detection is crucial for particle physics experiments, nuclear power, space and international security. Solid state neutron detectors are of great interest due to their superior mechanical robustness, smaller size and lower voltage operation compared to gas detectors. Gallium nitride (GaN), a mature wide bandgap optoelectronic and electronic semiconductor, is attracting research interest for neutron detection due to its radiation hardness and thermal stability. This work investigated thermal neutron scintillation detectors composed of GaN thin films with and without conversion layers or rare-earth doping. Intrinsic GaN-based neutron scintillators are demonstrated via the intrinsic 14 N(n, p) reaction, which has a small thermal neutron cross-section at low neutron energies, but is comparable to other reactions at high neutron energies (>1 MeV). Gamma discrimination is shown to be possible with pulse-height in intrinsic GaN-based scintillation detectors. Additionally, GaN-based scintillation detector with a 6 LiF neutron conversion layer and Gd-doped GaN detector are compared with intrinsic GaN detectors. These results indicate GaN scintillator is a suitable candidate neutron detector in high-flux applications.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Prediction of Ordering and Spontaneous Rotation of Epitaxial Habits in Substrate-Coherent InGaN and GaAsSb

Coherently strained In{sub 0.5}Ga{sub 0.5}N on GaN and CaO substrates are theoretically predicted to show stable ordering in the chalcopyrite structure, as is Ga{sub 2}AsSb on GaAs and InP substrates. Depending on the substrate and the film concentration, we predict a spontaneous rotation of the stablest chalcopyrite film axis from perpendicular to parallel to the (001) substrate.

36 MATERIALS SCIENCE↗

Structural and luminescence properties of CaTiO{sub 3}:Eu{sup 3+} phosphor synthesized by chemical co-precipitation method for the application of solid state lighting devices

The present work report a series of trivalent Europium (Eu{sup 3+}) doped well crystallized perovskite CaTiO{sub 3} phosphors successfully synthesized by chemical co-precipitation method. The crystal structure was confirmed by X-ray diffraction (XRD) which is in good agreement with pure orthorhombic phase with space group Pbnm, and it also indicated that the incorporation of the dopant did not affect the crystal structure. The impact of doping on the photoluminescence performances of the sample has been investigated by emission, excitation, and diffuse reflectance spectra at the room temperature. Photoluminescence spectra of Eu{sup 3+} doped CaTiO{sub 3} nanophosphor revealed the characteristic emission peak around wavelength 618 nm in the visible region upon the excitation of near-UV light at wavelength 397 nm due to {sup 5}D{sub 0} → {sup 7}F{sub 2} transition in Eu{sup 3+}. It was further proved that the dipole– dipole interactions results in the concentration quenching of Eu{sup 3+} in CaTiO{sub 3}:Eu{sup 3+} nanophosphors. The elemental composition of sample carried out by energy dispersive spectroscopy (EDS). EDS analysis reveals that the Eu{sup 3+} doped successfully into host CaTiO{sub 3}. The experimental result reveals that prepared nanophosphor can be used in the application of solid state lighting devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Scattering-type scanning near-field optical microscopy with Akiyama piezo-probes

Recent developments of the scattering-type scanning near-field optical microscope at cryogenic temperatures (cryogenic s-SNOM or cryo-SNOM) have led to many breakthroughs in the studies of low energy excitations in quantum materials. However, the simultaneous demands on vibration isolation, low base temperature, precise nano-positioning, and optical access make the construction of a cryo-SNOM a daunting task. Adding to the overhead space required for a cryo-SNOM is the atomic force microscopy control, which predominantly utilizes a laser-based detection scheme for determining the cantilever tapping motion. In this work, we provide an alternative and straightforward route to performing s-SNOM using metal-coated Akiyama probes, where the cantilever tapping motion is detected through a piezoelectric signal. We show that the Akiyama-based cryo-SNOM attains high spatial resolution, good near-field contrast, and is able to perform imaging with a significantly more compact system compared to other cryo-SNOM implementations. Our results firmly establish the potential of s-SNOM based on self-sensing piezo-probes, which can easily accommodate far-infrared wavelengths and high magnetic fields in the future.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Ultrafast time-resolved 2D imaging of laser-driven fast electron transport in solid density matter using an x-ray free electron laser

High-power, short-pulse laser-driven fast electrons can rapidly heat and ionize a high-density target before it hydrodynamically expands. The transport of such electrons within a solid target has been studied using two-dimensional (2D) imaging of electron-induced Kα radiation. However, it is currently limited to no or picosecond scale temporal resolutions. Here, we demonstrate femtosecond time-resolved 2D imaging of fast electron transport in a solid copper foil using the SACLA x-ray free electron laser (XFEL). An unfocused collimated x-ray beam produced transmission images with sub-micron and ~10 fs resolutions. The XFEL beam, tuned to its photon energy slightly above the Cu K-edge, enabled 2D imaging of transmission changes induced by electron isochoric heating. Time-resolved measurements obtained by varying the time delay between the x-ray probe and the optical laser show that the signature of the electron-heated region expands at ~25% of the speed of light in a picosecond duration. Time-integrated Cu Kα images support the electron energy and propagation distance observed with the transmission imaging. The x-ray near-edge transmission imaging with a tunable XFEL beam could be broadly applicable for imaging isochorically heated targets by laser-driven relativistic electrons, energetic protons, or an intense x-ray beam.

47 OTHER INSTRUMENTATION↗

Symmetry of the spatial structure of radiation upon transverse mode locking in an astigmatic resonator laser

The influence of the astigmatic resonator parameters on the symmetry of the spatial structure of the radiation intensity is analysed upon transverse mode locking in a nonuniformly pumped laser. Conditions for the transition from the circular symmetry to its violation are found. At a fixed astigmatism of the resonator, the symmetry is determined, first of all, by the resonator length and losses. The theoretical conclusions are confirmed by the experiments with diode end-pumped Nd:YAG and Nd:YLF lasers. (resonators)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

New ytterbium-phosphate glass for diode-pumped lasers

A new ytterbium laser glass based on an alumoborophosphate composition is developed. It is shown that the chemical and thermal stabilities of this glass are record-high for phosphate glasses and that its spectral and luminescent characteristics compare well with popular laser glasses. A mould of laser-quality glass doped with ytterbium with a concentration of 5x10{sup 20} cm{sup -3} is synthesised. Active laser elements 5x5x2 mm in size are prepared from this glass for longitudinal diode pumping. These elements were used to fabricate a laser, whose output power in the cw regime reached 783 mW and maximum slope efficiency was 28.9%. Pulses with a duration of {approx}150 fs and a peak power of about 5 kW are obtained in the passive mode-locking regime. (active media)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗