Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “slow”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

Slow X-ray bursts and chromospheric flares with filament disruption

The data from OGO-5 and OSO-7 X-ray experiments have been analyzed to study six chromospheric flares with filament disruption associated with slow thermal X-ray bursts. Filament activation accompanied by a slight X-ray enhancement precedes the first evidence of H alpha flare by a few minutes. Rapid increase of the soft X-ray flux is accompanied by a sudden brightening of the filament when viewed on-band H alpha. Thereafter the bright chromospheric strands reach their maximum brightness with maximum X-ray flux. Any plateau or slow decay phase in the X-ray flux is accompanied by a quieting in filament activity and even by filament re-appearance. The height of the disrupted prominence is proportional to the soft X-ray flux for the August 3, 1970 limb occulted event.

Roy, J. R.↗

A film-rupture model of hydrogen-induced, slow crack growth in alpha-beta titanium

The appearance of the terrace like fracture morphology of gaseous hydrogen induced crack growth in acicular alpha-beta titanium alloys is discussed as a function of specimen configuration, magnitude of applied stress intensity, test temperature, and hydrogen pressure. Although the overall appearance of the terrace structure remained essentially unchanged, a distinguishable variation is found in the size of the individual terrace steps, and step size is found to be inversely dependent upon the rate of hydrogen induced slow crack growth. Additionally, this inverse relationship is independent of all the variables investigated. These observations are quantitatively discussed in terms of the formation and growth of a thin hydride film along the alpha-beta boundaries and a qualitative model for hydrogen induced slow crack growth is presented, based on the film-rupture model of stress corrosion cracking.

Nelson, H. G.↗

Slow-scan operation of long linear CCD arrays

Linear CCD arrays used singly or in optically butted assemblies permit practical implementation of long line array systems with 6000 or more picture elements per line with readout rates in excess of 5 MHz. Display and tape recording of slow scan imagery with over 1000 picture elements per line also presents unique challenges. This paper discusses performance results and the operation of 1728-element CCD arrays for generation of high resolution slow scan imagery and some approaches for recording and display of the imagery. The implication of dark current and its control are discussed.

Vicars-Harris, M.↗

A film-rupture model of hydrogen-induced, slow crack growth in acicular alpha-beta titanium

A study has been conducted of the terrace-like fracture morphology of gaseous hydrogen-induced crack growth in acicular alpha-beta titanium alloys in terms of specimen configuration, magnitude of applied stress intensity, test temperature, and hydrogen pressure. Although the overall appearance of the terrace structure remained essentially unchanged, a distinguishable variation is found in the size of the individual terrace steps, and step size is found to be inversely dependent upon the rate of hydrogen-induced slow crack growth. This inverse relationship is independent of all the variables investigated. These observations are quantitatively discussed in terms of the formation and growth of a thin hydride film along the alpha-beta boundaries and a qualitative model for hydrogen-induced slow crack growth is presented, based on the film-rupture model of stress corrosion cracking.

Nelson, H. G.↗

Investigation of some problems in developing standards for precracked Charpy slow bend tests

The reported investigation was undertaken in connection with an attempt to develop procedures which would be useful in standardizing a test method for the precracked Charpy slow bend specimen. A number of alloys was studied for which valid plane-strain fracture toughness values have been established. The investigation shows that useful relations between precracked Charpy slow bend results and crack size factors can be obtained under some circumstances. However, it is not yet known what factors control these circumstances.

Succop, G.↗

Meter for very slow flows

Solid-state sensing unit developed for use with NASA's Water-Quality Monitoring System can detect small velocity changes in slow moving fluid. Nonprotruding sensor is applicable to numerous other uses requiring sensitive measurement of slow flows.

Baxter, W. J., Jr.↗

Recovery time course in contractile function of fast and slow skeletal muscle after hindlimb immobilization

The present study was undertaken to characterize the time course and extent of recovery in the isometric and isotonic contractile properties of fast and slow skeletal muscle following 6 wk of hindlimb immobilization. Female Sprague-Dawley rats were randomly assigned to an immobilized group or a control group. The results of the study show that fast and slow skeletal muscles possess the ability to completely recover normal contractile function following 6 wk of hindlimb immobilization. The rate of recovery is dependent on the fiber type composition of the affected muscle.

Witzmann, F. A.↗

Slow shocks around the sun

It is inferred from this study that magnetohydrodynamic slow shocks can exist in the vicinity of the sun. The study uses a two-hole corona model, the sub-Alfvenic streams originating from the edge of the polar open-field regions are forced to turn towards equator in coronal space following the curved boundary of the closed field region. When the streamlines from the opposite poles merge at a neutral point, their directions become parallel to the neutral sheet. An oblique slow shock can develop near or at the neutral point, the shock extends polewards to form a surface of discontinuity around the sun.

Whang, Y. C.↗

Slow crack growth in spinel in water

Magnesium aluminate spinel was tested in a water environment at room temperature to establish its slow crack-growth behavior. Ring specimens with artificial flaws on the outside surface were loaded hydraulically on the inside surface. The time to failure was measured. Various precracking techniques were evaluated and multiple precracks were used to minimize the scatter in the static fatigue tests. Statistical analysis techniques were developed to determine the strength and crack velocities for a single flaw. Slow crack-growth rupture was observed at stress intensities as low as 70 percent of K sub c. A strengthening effect was observed in specimens that had survived long-time static fatigue tests.

Schwantes, S.↗

Effect of swaging on the 1000 C compressive slow plastic flow characteristics of the directionally solidified eutectic alloy gamma/gamma prime-alpha

Swaging between 750 and 1050 C has been investigated as a means to introduce work into the directionally solidified eutectic alloy gamma/gamma prime-alpha (Ni-32.3 wt percent Mo-6.3 wt percent Al) and increase the elevated temperature creep strength. The 1000 C slow plastic compressive flow stress-strain rate properties in air of as-grown, annealed, and worked nominally 10 and 25 percent materials have been determined. Swaging did not improve the slow plastic behavior. In fact large reductions tended to degrade the strength and produced a change in the deformation mechanism from uniform flow to one involving intense slip band formation. Comparison of 1000 C tensile and compressive strength-strain rate data reveals that deformation is independent of the stress state.

Whittenberger, J. D.↗

Superconducting niobium thin film slow-wave structures

A superconducting comb structure as a slow-wave element in a traveling-wave maser will significantly improve maser noise temperature and gain by reducing the insertion loss. The results of the insertion loss measurements of superconducting niobium slow-wave structures subjected to maser operating conditions at X-Band frequencies are presented.

Bautista, J. J.↗

Effect of disuse on sarcoplasmic reticulum in fast and slow skeletal muscle

The effect of 6 weeks of hindlimb immobilization on rat skeletal muscle sarcoplasmic reticulum (SR) was determined in the slow-twitch, type 1 soleus (SOL), the fast-twitch, type 2A deep region of the vastus lateralis (DVL), and the fast-twitch, type 2B superficial region of the vastus lateralis (SVL). Immobilization produced a significant decline in the Ca(2+) uptake rate (V sub max) of SR vesicles from the slow SOL, while the SR V sub max increased in the fast SVL and was unaltered in the DVL. Vesicles from the fast SVL and DVL also exhibited a higher total Ca(2+) uptake capacity following immobilization. An evaluation of the time course of the immobilization-mediated effect revealed an increased Ca(2+) uptake capacity in all three samples after 1 wk. In the SOL total Ca(2+) uptake returned to control level after 2 wk, while in the fast-twitch muscles the higher capacities were maintained. The Ca(2+)-stimulated SR ATPase activity was not altered in any of the muscle studies.

Kim, D. H.↗

Disuse Induced Changes in the Cholinergic System of Sciatic Nerve and Slow and Fast Twitch Muscle of Rats

Hindlimb suspension was used as a model of disuse in experiments studing the effects of reduced muscle activity on AChE and its molecular forms, choline acetyltransferase and nicotinic receptor binding in innervated slow and fast muscle. The weight of SOL was reduced to 64% within one week and continued to decrease progressively up to the third week when the weight was reduced to 40% as compared to controls. EDL showed a significant decrease in its weight only at the end of three weeks hypokinesia when it was reduced to 71% of control. Biochemical and histochemical findings are summarized. From these data and from morphological findings it is evident that some properties of skeletal muscles are strongly dependent on patterns and level of loadbearing and on motor unit activiy. With suspension-induced disuse, the usually slow SOL appeared to change its characteristics such as fiber type distribution and AChE activity to one that more resembled a faster muscle. It is important to note that hypokinesia induced changes either physiological, biochemical or morphological, are totally reversible as the induced changes returned to control levels within a week after cessation of disuse.

Dettbarn, W. D.↗

Nonlinear evolution of slow waves in the solar wind

It is shown by numerical simulation using a hybrid code that comparison of the nonlinear steepening rate, calculated from fluid theory, with the linear collisionless damping rate defines reasonably well the parameters for which fast and slow MHD waves should steepen. The results indicate that, whereas fast modes should ordinarly steepen, steepened slow waves should occur rarely in the solar wind near 1 AU.

Hada, T.↗

The structure and evolution of slow mode shocks

Studies of the structure and evolution of slow mode shocks obtained by numerical simulation are presented. It is shown that slow shocks can be formed self-consistently and evolve slowly in time, while maintaining a well-defined structure. As fluid theory predicts, the dominant feature is a trailing magnetic wavetrain whose damping length increases with time toward the fluid limit. The behavior of the ions which are backstreaming from the shock are investigated and the stability of the upstream distributions to the types of electromagnetic ion-beam instabilities found in the earth's foreshock are examined.

Winske, D.↗

Diffusion flame extinction in slow convenctive flow under microgravity environment

A theoretical analysis is presented to study the extinction characteristics of a diffusion flame near the leading edge of a thin fuel plate in slow, forced convective flows in a microgravity environment. The mathematical model includes two-dimensional Navier-Stokes momentum, energy and species equations with one-step overall chemical reaction using second-order finite rate Arrhenius kinetics. Radiant heat loss on the fuel plate is applied in the model as it is the dominant mechanism for flame extinguishment in the small convective flow regime. A parametric study based on the variation of convective flow velocity, which varies the Damkohler number (Da), and the surface radiant heat loss parameter (S) simultaneously, is given. An extinction limit is found in the regime of slow convective flow when the rate of radiant heat loss from fuel surface outweighs the rate of heat generation due to combustion. The transition from existent envelope flame to extinguishment consists of gradual flame contraction in the opposed flow direction together with flame temperature reduction as the convective flow velocity decreases continuously until the extinction limit is reached. A case of flame structure subjected to surface radiant heat loss is also presented and discussed.

Chen, C. H.↗

Slow crack growth measurement using an electrical grid

Photolithography was used to produce a resistance grid on the surface of a DCB fracture specimen. The grid line spacings were 10 microns over a distance of 2 cm. Slow crack growth was measured on soda-lime-silica glass. At low values of K(I) (0.3 to 0.4 MPa.sq r + m, increased. Equations are given for the design of grids. The grid technique could be used to measure very slow crack growth at high temperature with appropriate compatible metal-ceramic materials.

Martin, D. J.↗

Structure of a slow mode shock observed in the plasma sheet boundary layer

A detailed study of the plasma parameters and magnetic field measured using instrumentation aboard ISEE 2 during the recovery phase of a substorm on Apr. 24, 1979, is presented. The purpose of this study was to determine the nature and structure of the lobe-plasma sheet boundary layer. The analysis shows that the lobeward edge of the boundary is consistent with a freestanding slow mode shock. This shock is followed by a slow compression wave containing a trailing ion cyclotron wave which also stands in the flow. Measurement of the cross-tail current in the shock and the current system within the wave gives a shock thickness and wavelength comparable to but larger than both the upstream ion inertial length and the downstream proton gyroradius. Equality of the shock thickness with the standing ion cyclotron wavelength suggests that the steepness of the front is limited by dispersion rather than current-driven anomalous resistivity.

Feldman, W. C.↗