Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “seismic”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Finite Element Modeling of Spent Nuclear Fuel in Dry Storage under Seismic Excitation

Spent nuclear fuel (SNF) is currently stored at independent spent fuel storage installations (ISFSIs) at nuclear power plant sites across the US. The US Department of Energy (DOE) Spent Fuel and Waste Science and Technology (SFWST) program is currently working to understand the response of SNF during a seismic event. This investigation is part of a long-term effort by DOE to quantify the external mechanical loads on SNF. The SFWST program has recently completed campaigns evaluating SNF behavior during normal conditions of transport and in 30 cm package drop scenarios; both campaigns included a combination of testing and modeling. Likewise, the investigation into seismic response of SNF will include full-size shake table tests of a vertical storage overpack containing instrumented surrogate fuel assemblies, as well as pre- and post-test finite element modeling. This work focuses on the development of finite element models simulating the planned test configuration. The seismic response is calculated at two scales: at the package level, and at the fuel level. The package level model evaluates the behavior of the storage overpack and its contents in response to the ground motions of a representative earthquake. The motion of the package is input to the fuel level model, which consists of a detailed finite element model of a 17x17 or 16x16 pressurized water reactor (PWR) fuel assembly or of a 10x10 boiling water reactor (BWR) fuel assembly. The stress and strain on individual components such as fuel rods and guide tubes are extracted from this model. This work details the SNF response to various input ground motions, considering representative earthquakes in the Central and Eastern US under various site conditions. Also discussed is the development of a “reduced scope” finite element model of the SNF, which consists of a single fuel rod while retaining the dynamic response of the entire fuel assembly. This reduced scope model addresses the significant computational expense of modeling the SNF under long-duration input ground motions and facilitates simulating additional parameter variations of the model beyond the as-tested configuration. The modeling results provide important insight that will help to inform future testing and modeling efforts by the SFWST program to close the knowledge gap related to external loads on SNF.

Kadooka, Kevin↗
DOE OSTI2023

Seismic detection switch

A seismic switch (SS) that is able to detect and signal when internal faults have occurred within the SS is described. The SS provides safety class functionality to the detection of seismic activity. For example, the SS may detect earthquakes above a specified level, resulting in the disconnection of electrical power to a radioactive waste storage facility, which could result in the ignition of waste materials should the storage facility and/or storage container fail during a seismic event. By reducing the risk of fire under these circumstances, the possibility of offsite releases is significantly reduced.

Hayward, Allen D.↗
DOE OSTI2021

SPiRaL: a multiresolution global tomography model of seismic wave speeds and radial anisotropy variations in the crust and mantle

SUMMARY SPiRaL is a joint global-scale model of wave speeds (P and S) and anisotropy (vertical transverse isotropy, VTI) variations in the crust and mantle. The model is comprised of >2.1 million nodes with five parameters at each node that capture velocity variations for P- and S-waves travelling at arbitrary directions in transversely isotropic media with a vertical symmetry axis (VTI). The crust (including ice, water, sediments and crystalline layers) is directly incorporated into the model. The default node spacing is approximately 2° in the lower mantle and 1° in the crust and upper mantle. The grid is refined with ∼0.25° minimum node spacing in highly sampled regions of the crust and upper mantle throughout North America and Eurasia. The data considered in the construction of SPiRaL includes millions of body wave traveltimes (crustal, regional and teleseismic phases with multiples) and surface wave (Rayleigh and Love) dispersion. A multiresolution inversion approach is employed to capture long-wavelength heterogeneities commonly depicted in global-scale tomography images as well as more localized details that are typically resolved in more focused regional-scale studies. Our previous work has demonstrated that such global-scale models with regional-scale detail can accurately predict both teleseismic and regional body wave traveltimes, which is necessary for more accurate location of small seismic events that may have limited signal at teleseismic distances. SPiRaL was constructed to predict traveltimes for event location and long-period waveform dispersion for seismic source inversion applications in regions without sufficiently tuned models. SPiRaL may also serve as a starting model for full-waveform inversion (FWI) with the goal of fitting waves with periods 10–50 s over multiple broad regions (thousands of kilometres) and potentially the globe. To gain insight to this possibility, we simulated waveforms for a small set of events using SPiRaL and independent waveform-based models for comparison. For the events tested, the performance of the traveltime-based SPiRaL model is shown to be generally on par with regional 3-D waveform-based models in three regions (western United States, Middle East, Korean Peninsula) suggesting SPiRaL may serve as a starting model for FWI over broad regions.

58 GEOSCIENCES↗
DOE OSTI2020

Prestack Waveform Inversion at GC 955: Trials and sensitivity of PWI to high-resolution seismic data (Data Report)

Understanding the spatial extent and variability of hydrate deposits has important implications for potential economic production, climate change, and assessing natural hazards risks. Seismic reflection techniques are capable of determining the extent of gas hydrate deposits and can shed light on hydrate concentrations and properties. Using high resolution prestack time migrated seismic data collected during a 2013 US Geological Survey expedition and prestack waveform inversion (PWI) techniques, we produce highly resolved velocity models and compare them to co-located well logs. Coupling our PWI results with velocity-porosity relationships and nearby well control, we compare hydrate properties at site 955 in the Green Canyon and site 313 at Walker Ridge.

03 NATURAL GAS↗
DOE OSTI2020

Capabilities of multivariate Bayesian inference toward seismic hazard assessment

Multivariate Bayesian analysis can bring significant benefits to seismic hazard analysis: Its multivariate feature enables computing scalar and vector hazard without making any approximations; Correlations between intensity measures are implicitly modeled, permitting direct simulation of ground motion selection tools such as the conditional mean spectrum and the generalized conditioning intensity measure; and Its updating feature enables a seamless integration of new ground motion data into the hazard results. Here, we first develop a multivariate Bayesian ground motion model through the NGA-West2 database. The model functional form considers fault-type, magnitude, and distance dependencies, and also the linear and the rock intensity dependent site response. We use a hybrid Markov Chain Monte Carlo sampling to perform Bayesian inference consisting of Gibbs step and a multilevel Metropolis-Hastings step. We then perform several checks on the model and note that its performance is satisfactory. Finally, we illustrate the merits of this multivariate Bayesian analysis, which include: ground motion model updating with ground motion data recorded in the last four years not part of the NGA-West2 database; computation of scalar and vector seismic hazard using the un-updated and updated ground motion models for Los Angeles, CA; and simulation of the conditional mean spectrum under scalar and vector IM conditioning while accounting for different sources of aleatoric and epistemic uncertainties.

58 GEOSCIENCES↗
DOE OSTI2020

Seismic identification of geothermal prospecting in Harrat Rahat, Northern Arabian Shield

Harrat Rahat volcanic field lies along the Makkah-Madinah-Nafud active volcanic line. It has extensive linear weak zones of wrench faults that could provide ideal conduits for upwelling magma and hydrothermal fluids as well. Here, passive seismic data recorded by seismic stations installed within and around Harrat Rahat has been processed for the detection of microseismic events. Moreover, ambient noise was also gathered and analyzed to construct a subsurface velocity model. This model indicates low velocity zone in Harrat Rahat, and two areas with coincident basement faults and possibly with enhanced subsurface temperatures were identified. It is concluded that Harrat Rahat has high geothermal potential and promising for geothermal renewable power.

58 GEOSCIENCES↗
DOE OSTI2020

Seismic monitoring and high-frequency noise using arrays in the Arabian Peninsula

Seismic arrays provide useful tools for regional seismic monitoring. Two small-aperture, regionally-oriented arrays, QWAR and HQAR, were deployed in Saudi Arabia and Oman in 2012 and 2016. We utilize a time-domain beampacking method, similar to frequency-wavenumber analysis, to examine the performance of the arrays in terms of slowness and azimuthal bias and event detection capabilities. Additionally, we investigate persistent ambient noise sources recorded by the arrays. We find that the arrays provide slowness vectors with biases comparable with similar-sized arrays of the International Monitoring System in other locations around the world. At QWAR, regional events of magnitude 3.0 and above are detected a majority of the time, and as magnitudes increase to 4.0 and above, the detection rate is greater than 82%. Finally, strong noise generation, primarily with slownesses characteristic of Lg waves, is found in the directions of the northern Arabian/Persian Gulf and southern Red Sea and may be a factor in event detection capabilities.

58 GEOSCIENCES↗
DOE OSTI2026

3D seismic imaging of a fracture damage zone controlling reservoir compartmentalization at the Raft River EGS using multi-azimuth walkaway VSP

Accurate imaging of steeply dipping fracture zones in crystalline enhanced geothermal systems (EGS) is critical for constraining permeability architecture and guiding stimulation design. However, such structures remain poorly resolved by conventional surface seismic methods. We present a fully three-dimensional (3D) elastic-waveform inversion-migration workflow applied to multi-azimuth walkaway vertical seismic profiling (VSP) data acquired in a deviated borehole at the Raft River EGS. The workflow integrates first-arrival traveltime tomography, multi-scale elastic waveform inversion (EWI), and elastic least-squares reverse-time migration (ELSRTM) to recover high-resolution compressional-and shear-wave velocity models and to image structural discontinuities in the crystalline basement. The results reveal a laterally continuous low-velocity anomaly, with shear-wave velocity reductions of 25-30%, consistent with fractureinduced mechanical weakening. Two steeply dipping discontinuities bound a 50-80 m wide fracture damage zone. Independent constraints from microseismic clustering and geochemical compartmentalization corroborate the geometry and structural significance of this feature. Synthetic modeling further confirms that structures of this scale are resolvable (~30 m). These findings indicate that the Narrows structure is a distributed fracture damage zone rather than a discrete fault plane. By resolving fracture-zone geometry at the tens-of-meters scale using a single borehole, this workflow provides a practical and transferable approach for improving structural characterization, reducing uncertainty in permeability architecture, and supporting reservoir modeling and stimulation design in fractured crystalline EGS reservoirs.

58 GEOSCIENCES↗
DOE OSTI2022

Potential Seismicity Along Basement Faults Induced by Geological Carbon Sequestration

Large-scale CO 2 sequestration into geological formations has been suggested to reduce CO 2 emissions from industrial activities. However, much like enhanced geothermal stimulation and wastewater injection, CO 2 sequestration has a potential to induce earthquake along weak faults, which can be considered a negative impact on safety and public opinion. This research shows the physical mechanisms of potential seismic hazards along basement faults driven by CO 2 sequestration under variation in geological and operational constraints. Specifically we compare the poroelastic behaviors between multiphase flow and single-phase flow cases, highlighting specific needs of evaluating induced seismicity associated with CO 2 sequestration. In contrast to single-phase injection scenario, slower migration of the CO 2 plume than pressure pulse may delay accumulation of pressure and stress along basement faults that may not be mitigated immediately by shut-in of injection. The impact of multiphase flow system, therefore, needs to be considered for proper monitoring and mitigation strategies.

58 GEOSCIENCES↗
DOE OSTI2023

Understanding Subsurface Fracture Evolution Dynamics Using Time‐Lapse Full Waveform Inversion of Continuous Active‐Source Seismic Monitoring Data

Abstract Predicting the behavior, geometry, and flow properties of subsurface fractures remains a challenging problem. Seismic models that can characterize fractures usually suffer from low spatiotemporal resolution. Here, we develop a correlative double‐difference time‐lapse full waveform inversion of continuous active source seismic monitoring data for determining high‐spatiotemporal‐resolution time‐lapse V p models of in‐situ fracture evolution at a shallow contamination site in Wyoming, USA. Assisted by rock physics modeling, we find that (a) rapidly increasing pore pressure initializes and grows the fracture, increasing the porosity slightly (from ∼13.7% to ∼14.6%) in the tight clay formation, thus decreasing V p (∼50 m/s); (b) the fluid injection continues decreasing V p , likely through the introduction of gas bubbles in the injectate; and (c) final V p reductions reach over ∼150 m/s due to a posited ∼4.5% gas saturation. Our results demonstrate that high‐resolution V p changes are indicative of mechanical and fluid changes within the fracture zone during hydrofracturing.

58 GEOSCIENCES↗
DOE OSTI2021

Widespread deep seismicity in the Delaware Basin, Texas, is mainly driven by shallow wastewater injection

Significance The Delaware Basin, western Texas, has experienced a surge in the number of earthquakes. We investigate basin-wide earthquake, hydrogeologic, industrial, and geodetic data spanning 1993–2020 to identify the reasons for the increase. We use these data and models to quantify the stress changes from wastewater injection and hydrocarbon extraction. We demonstrate that the basin-wide seismicity is dominated by the stresses caused by shallow injection that are transmitted vertically by deforming the underlying crust. We analyze both injection and production data to understand how subsurface properties control earthquake locations and timings. We suggest that injecting wastewater into porous formations will minimize seismic hazard. We establish a framework explaining why earthquakes sometimes occur and sometimes do not occur within human activity-impacted areas.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Data-informed grid refinement to improve traveltime accuracy in the regional seismic traveltime (RSTT) model

The regional seismic traveltime (RSTT) model predicts traveltimes of regional seismic phases accounting for 3-D structure of the crust and the upper mantle on a global scale. Previous versions of the RSTT model have been implemented using nodes separated by ∼1° spacing across the globe. A regional-scale study using regional Pn and Pg traveltimes across Israel and the Middle East demonstrated that data driven, systematic grid refinement reduces traveltime residuals and enhances resolution of smaller tectonic features in regions having dense ray coverage. High density Pn ray coverage in the western US, Europe, Middle East and East Asia can likewise provide the resolution that allows systematic global grid refinement of the RSTT model. In this study, we use a large number of Pn ray paths originating from events located with an epicentral location uncertainty of 25 km (GT25) or better. We conduct targeted grid refinements at 1.0°, 0.5°, 0.25° and 0.125° on a global scale, producing a refined RSTT model that yields a 21.6 per cent reduction in median event location error in Europe and the Middle East, when compared with the original global RSTT model presented in Begnaud et al. The new model also resolves finer tectonic structures in regions with high Pn ray density.

58 GEOSCIENCES↗
DOE OSTI2021

Multiscale Data-Driven Seismic Full-Waveform Inversion With Field Data Study

Seismic full-waveform inversion (FWI), which uses iterative methods to estimate high-resolution subsurface models from seismograms, is a powerful imaging technique in exploration geophysics. In recent years, the computational cost of FWI has grown exponentially due to the increasing size and resolution of seismic data. Moreover, it is a nonconvex problem and can encounter local minima due to the limited accuracy of the initial velocity models or the absence of low frequencies in the measurements. To overcome these computational issues, we develop a multiscale data-driven FWI method based on fully convolutional networks (FCNs). In preparing the training data, we first develop a real-time style transform method to create a large set of synthetic subsurface velocity models from natural images. We then develop two convolutional neural networks with encoder-decoder structures to reconstruct the low- and high-frequency components of the subsurface velocity models, separately. To validate the performance of our data-driven inversion method and the effectiveness of the synthesized training set, we compare it with conventional physics-based waveform inversion approaches using both synthetic and field data. Finally, these numerical results demonstrate that, once our model is fully trained, it can significantly reduce the computation time and yield more accurate subsurface velocity models in comparison with conventional FWI.

58 GEOSCIENCES↗
DOE OSTI2022

Making Invisible Visible: Data-Driven Seismic Inversion With Spatio-Temporally Constrained Data Augmentation

Deep learning and data-driven approaches have shown great potential in scientific domains. The promise of data-driven techniques relies on the availability of a large volume of high-quality training datasets. Due to the high cost of obtaining data through expensive physical experiments, instruments, and simulations, data augmentation techniques for scientific applications have emerged as a new direction for obtaining scientific data recently. However, existing data augmentation techniques originating from computer vision yield physically unacceptable data samples that are not helpful for the domain problems that we are interested in. In this article, we develop new data augmentation techniques based on convolutional neural networks. Specifically, our generative models leverage different physics knowledge (such as governing equations, observable perception, and physics phenomena) to improve the quality of the synthetic data. To validate the effectiveness of our data augmentation techniques, we apply them to solve a subsurface seismic full-waveform inversion using simulated CO 2 leakage data. Our interest is to invert for subsurface velocity models associated with very small CO 2 leakage. We validate the performance of our methods using comprehensive numerical tests. Here via comparison and analysis, we show that data-driven seismic imaging can be significantly enhanced by using our data augmentation techniques. Particularly, the imaging quality has been improved by 15% in test scenarios of general-sized leakage and 17% in small-sized leakage when using an augmented training set obtained with our techniques.

58 GEOSCIENCES↗
DOE OSTI2022

Assessing the Effectiveness of Generalized Likelihood Ratio Test Detector Schemes in Seismic Event Detection and the Avoidance of Nontarget Signals

Cross-correlation techniques have played a long-standing and pivotal role in seismic event monitoring. However, the performance of correlation-based detectors is challenged by nuisance seismicity, or nontarget signals. Such detections are a problem when the mission is to automatically map events to the correct source region. Using aftershocks of the 2014 $M_w$ 6.0 South Napa, California, earthquake, we demonstrate the effectiveness of utilizing a dynamic correlation processor framework in a generalized likelihood ratio test (GLRT) detector configuration to minimize nontarget detections. A GLRT maximizes a detection statistic with respect to one or more unknown parameters. In this case, the detection statistic is a template signal match against the waveform in a window sliding over a data stream, and the unknown parameter is an index variable indicating group membership of the template event or events. Detected events are assigned to the event group that yields the largest detection statistic. In this work, our results show that a GLRT detector will outperform a suite of independently operating correlation and subspace detectors in terms of having a lower nontarget detection rate at a given missed detection rate. We also show that a GLRT detector composed of a few high-rank subspace detectors has a slightly higher nontarget detection rate, but a significantly lower missed detection rate, than a GLRT detector composed of many low-rank subspace detectors. The high-rank GLRT configuration produced impressive results even with marginal data (single channel, single station, and very low time bandwidth product), which bodes well for the utility of building efficient aftershock classification systems and global monitoring systems at larger scales. However, future work is required to assess performance at the regional scale and to assess the performance of the system at detecting target events not used in the detector template creation.

58 GEOSCIENCES↗
DOE OSTI2020

Microseismic Monitoring Study to Assess the Potential for Induced Seismicity in a Depleted Oil Field in Northern Michigan

The Midwest Regional Carbon Sequestration Partnership (MRCSP) was founded in 2003 as part of the U.S. Department of Energy’s (DOE’s) Regional Carbon Sequestration Partnership initiative. Since its founding, MRCSP has made significant strides toward making CCUS a viable option for states in the region. The public/private consortium, funded through the DOE Regional Carbon Sequestration Initiative, brings together nearly 40 industry partners and 10 states. Battelle, as the project lead, oversees research, development and operations and coordinates activities among the partners. The incremental, phased approach has built a valuable knowledge base for the industry and paved the way for commercial-scale adoption of CCUS technologies. From 2008 to 2020, MRCSP Phase III focused on the development of large-scale injection projects. This report is part of a series of reports prepared under the Midwestern Regional Carbon Sequestration Partnership (MRCSP) Phase III (Development Phase). These reports summarize and detail the findings of the work conducted under the Phase III project. Microseismic monitoring is the passive recording of very small-scale seismic energy events occurring underground. Microseismic monitoring has been proposed as a monitoring technology for CCUS sites to monitor fracturing before it becomes sufficiently extensive to cause leakage. This study aimed to determine if CO 2 injection into the Niagaran pinnacle reefs in northern Michigan is likely to generate microseismic events. The Niagaran reefs are relatively small, closed features making it possible to observe a large pressure increase by injecting a relatively small volume of CO 2 . In this study, two microseismic monitoring events were conducted 39 months apart during re-pressurization of the Dover 33 reef to evaluate the potential for CO 2 -injection induced seismicity in Silurian-age carbonate reef depleted oil reservoirs.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2020

Cross-Well Seismic Monitoring of CO 2 Injected Into the A-1 Carbonate and Brown Niagaran Formations at the Chester 16 Reef

The Midwest Regional Carbon Sequestration Partnership (MRCSP) was founded in 2003 as part of the U.S. Department of Energy’s (DOE’s) Regional Carbon Sequestration Partnership initiative. Since its founding, MRCSP has made significant strides toward making CCUS a viable option for states in the region. The public/private consortium, funded through the DOE Regional Carbon Sequestration Initiative, brings together nearly 40 industry partners and 10 states. Battelle, as the project lead, oversees research, development and operations and coordinates activities among the partners. The incremental, phased approach has built a valuable knowledge base for the industry and paved the way for commercial-scale adoption of CCUS technologies. From 2008 to 2020, MRCSP Phase III focused on the development of large-scale injection projects. This report is part of a series of reports prepared under the Midwestern Regional Carbon Sequestration Partnership (MRCSP) Phase III (Development Phase). These reports summarize and detail the findings of the work conducted under the Phase III project. A cross-well seismic survey was acquired in the Chester 16 reef to attempt to locate 85,000 tonnes of carbon dioxide (CO 2 ) that were injected into the A-1 Carbonate and Brown Niagaran Formations earlier. The technique of conducting multiple cross-well seismic surveys over time, including a pre-CO 2 injection (baseline) survey, has been used elsewhere to monitor CO 2 injected into the subsurface. In this study, a baseline cross-well survey was not obtained; nevertheless, it was possible to generate an image that is a plausible representation of the CO 2 plume. This conclusion is supported by other monitoring and modeling results from the Chester 16 reef that provide an independent indication about the likely position of the injected CO 2 .

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2024

Seismic Bracing Development for the Moore 3 Diamond Turning Machine at Lawrence Livermore National Laboratory

To allow for on-site Potassium Dihydrogen Phosphate (KDP) crystal finishing capabilities, Lawrence Livermore National Laboratory (LLNL) acquired the Moore 3 diamond turning machine. Equipment such as the Moore 3 is required by LLNL to have adequate seismic bracing before permanent installation to reduce the risk of personnel injury or machine damage during an earthquake. The purpose of this project was to design a bracket that can withstand seismic forces induced by the machine without hindering function. To develop a solution, background research—including stakeholder identification, stakeholder interviews, and a literature survey—was conducted. Based on LLNL site and stakeholder requirements, several approaches were developed for bracing the Moore 3. Ideations were evaluated based on a weighted decision matrix and a final design strategy was selected. This design was an L-shaped weldment that featured provisions for four HILTI concrete anchors, three triangular gussets, and a steel construction.

42 ENGINEERING↗