Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “second-order methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24
All sourcesNASA NTRSDOE OSTI
NASA NTRS1988

Third-order multi-dimensional Euler/Navier-Stokes solver

A nonoscillatory multidimensional advection code is presented which is applicable to the study of very high Reynolds number steady flow, and results are obtained for the oblique advection of a step profile. The scheme is based on an exponential upwinding or linear extrapolation refinement of a previous QUICK scheme, allowing sharp monotonic resolution of the step while retaining third-order accuracy. The resulting simple flux-limiting criteria have been applied to a higher order method and a formally third-order supercompressive algorithm. Results are presented for first-order, second-order, and third-order upwinding.

Leonard, B. P.↗
NASA NTRS1988

Universal limiter for transient interpolation modeling of the advective transport equations: The ULTIMATE conservative difference scheme

A fresh approach is taken to the embarrassingly difficult problem of adequately modeling simple pure advection. An explicit conservative control-volume formation makes use of a universal limiter for transient interpolation modeling of the advective transport equations. This ULTIMATE conservative difference scheme is applied to unsteady, one-dimensional scalar pure advection at constant velocity, using three critical test profiles: an isolated sine-squared wave, a discontinuous step, and a semi-ellipse. The goal, of course, is to devise a single robust scheme which achieves sharp monotonic resolution of the step without corrupting the other profiles. The semi-ellipse is particularly challenging because of its combination of sudden and gradual changes in gradient. The ULTIMATE strategy can be applied to explicit conservation schemes of any order of accuracy. Second-order schemes are unsatisfactory, showing steepening and clipping typical of currently popular so-called high resolution shock-capturing of TVD schemes. The ULTIMATE third-order upwind scheme is highly satisfactory for most flows of practical importance. Higher order methods give predictably better step resolution, although even-order schemes generate a (monotonic) waviness in the difficult semi-ellipse simulation. Little is to be gained above ULTIMATE fifth-order upwinding which gives results close to the ultimate for which one might hope.

Leonard, B. P.↗
NASA NTRS1989

A defect stream function, law of the wall/wake method for compressible turbulent boundary layers

The application of the defect stream function to the solution of the two-dimensional, compressible boundary layer is examined. A law of the wall/law of the wake formulation for the inner part of the boundary layer is presented which greatly simplifies the computational task near the wall and eliminates the need for an eddy viscosity model in this region. The eddy viscosity model in the outer region is arbitrary. The modified Crocco temperature-velocity relationship is used as a simplification of the differential energy equation. Formulations for both equilibrium and nonequilibrium boundary layers are presented including a constrained zero-order form which significantly reduces the computational workload while retaining the significant physics of the flow. A formulation for primitive variables is also presented. Results are given for the constrained zero-order and second-order equilibrium formulations and are compared with experimental data. A compressible wake function valid near the wall has been developed from the present results.

Barnwell, Richard W.↗
NASA NTRS1989

Numerical solution of the incompressible Navier-Stokes equations for steady-state and time-dependent problems

An algorithm for the solution of the incompressible Navier-Stokes equations in three-dimensional generalized curvilinear coordinates is presented. The algorithm can be used to compute both steady-state and time-dependent flow problems. The algorithm is based on the method of artificial compressibility and uses a higher-order flux-difference splitting technique for the convective terms and a second-order central difference for the viscous terms. The steady-state solution of flow through a square duct with a 90 deg bend is computed and the results are compared with experimental data. Good agreement is observed. A comparison with an analytically known exact solution is then performed to verify the time accuracy of the algorithm. Finally, the flow through an artificial heart configuration with moving boundaries is calculated and presented.

Rogers, Stuart E.↗
NASA NTRS1988

Exposure time considerations in high temperature low cycle fatigue

The Conventional Strainrange Partitioning (CSRP) method for High-Temperature, Low-Cycle Fatigue (HTLCF) life prediction has its origins in the modeling of first-order, creep-fatigue waveform effects while treating as second-order effects, the influence of metallurgical or environmental time dependencies. Procedures are proposed to include the latter explicitly in the inelastic strainrange-life relations. For brevity, only the CP life relation will be presented in detail. The exposure-time effect within the CP inelastic strainrange (tensile creep reversed by compressive plasticity) was determined by tensile stresshold-time experiments for 316 SS at 816 C. Reductions in CP cyclic life of a factor of about two were observed with an increase in exposure time or a corresponding decrease in creep rate by a factor of about 100. The CP life relation has been modified to be expressed in terms of either Steady State Creep Rate (SSCR) or Exposure Time (ET). The applicability and accuracy of the time-dependent CP life relations is demonstrated by conducting verification experiments involving complex hysteresis loops. Metallographic examination revealed time-dependent degradation attributable to oxide formation and precipitation of carbides along grain boundaries.

Kalluri, S.↗
NASA NTRS1989

First and second order convex approximation strategies in structural optimization

In this paper, various methods based on convex approximation schemes are discussed that have demonstrated strong potential for efficient solution of structural optimization problems. First, the convex linearization method (Conlin) is briefly described, as well as one of its recent generalizations, the method of moving asymptotes (MMA). Both Conlin and MMA can be interpreted as first-order convex approximation methods that attempt to estimate the curvature of the problem functions on the basis of semiempirical rules. Attention is next directed toward methods that use diagonal second derivatives in order to provide a sound basis for building up high-quality explicit approximations of the behavior constraints. In particular, it is shown how second-order information can be effectively used without demanding a prohibitive computational cost. Various first-order and second-order approaches are compared by applying them to simple problems that have a closed form solution.

Fleury, C.↗
NASA NTRS1989

Numerical Study of Three-dimensional Spatial Instability of a Supersonic Flat Plate Boundary Layer

The behavior of spatially growing three-dimensional waves in a supersonic boundary layer was studied numerically by solving the complete Navier-Stokes equations. Satisfactory comparison with linear parallel and non-parallel stability theories, and experiment are obtained when a small amplitude inflow disturbance is used. The three-dimensional unsteady Navier-Stokes equations are solved by a finite difference method which is fourth-order and second-order accurate in the convection and viscous terms respectively, and second-order accurate in time. Spanwise periodicity is assumed. The inflow disturbance is composed of eigenfunctions from linear stability theory. By increasing the amplitude of the inflow disturbance, nonlinear effects in the form of a relaxation type oscillation of the time signal of rho(u) are observed.

Maestrello, Lucio↗
NASA NTRS1990

A fully Sinc-Galerkin method for Euler-Bernoulli beam models

A fully Sinc-Galerkin method in both space and time is presented for fourth-order time-dependent partial differential equations with fixed and cantilever boundary conditions. The Sinc discretizations for the second-order temporal problem and the fourth-order spatial problems are presented. Alternate formulations for variable parameter fourth-order problems are given which prove to be especially useful when applying the forward techniques to parameter recovery problems. The discrete system which corresponds to the time-dependent partial differential equations of interest are then formulated. Computational issues are discussed and a robust and efficient algorithm for solving the resulting matrix system is outlined. Numerical results which highlight the method are given for problems with both analytic and singular solutions as well as fixed and cantilever boundary conditions.

Smith, R. C.↗
NASA NTRS1991

Steady and unsteady solutions of the incompressible Navier-Stokes equations

An algorithm for the solution of the incompressible Navier-Stokes equations in three-dimensional generalized curvilinear coordinates is presented. The algorithm can be used to compute both steady-state and time-dependent flow problems. The algorithm is based on the method of artificial compressibility and uses a third-order flux-difference splitting technique for the convective terms and the second-order central difference for the viscous terms. The accuracy is obtained in the numerical solutions by subiterating the equations in pseudotime for each physical time step. The equations are solved with a line-relaxation scheme that allows the use of very large pseudotime steps leading to fast convergence for steady-state problems as well as for the subiterations of time-dependent problems. The steady-state solution of flow through a square duct with a 90-deg bend is computed, and the results are compared with experimental data. Good agreement is observed. Computations of unsteady flow over a circular cylinder are presented and compared to other experimental and computational results. Finally, the flow through an artificial heart configuration with moving boundaries is calculated and presented.

Rogers, Stuart E.↗
NASA NTRS1991

Design of algorithms for a dispersive hyperbolic problem

In order to develop numerical schemes for stiff problems, a model of relaxing heat flow is studied. To isolate those errors unavoidably associated with discretization, a method of characteristics is developed, containing three free parameters depending on the stiffness ratio. It is shown that such 'decoupled' schemes do not take into account the interaction between the wave families, and hence result in incorrect wavespeeds. Schemes can differ by up to two orders of magnitude in their rms errors, even while maintaining second-order accuracy. 'Coupled' schemes which account for the interactions are developed to obtain two additional free parameters. Numerical results are given for several decoupled and coupled schemes.

Roe, Philip L.↗
NASA NTRS1992

Practical theories for service life prediction of critical aerospace structural components

A new second-order theory was developed for predicting the service lives of aerospace structural components. The predictions based on this new theory were compared with those based on the Ko first-order theory and the classical theory of service life predictions. The new theory gives very accurate service life predictions. An equivalent constant-amplitude stress cycle method was proposed for representing the random load spectrum for crack growth calculations. This method predicts the most conservative service life. The proposed use of minimum detectable crack size, instead of proof load established crack size as an initial crack size for crack growth calculations, could give a more realistic service life.

Ko, William L.↗
NASA NTRS1992

Numerical experiments on a new class of nonoscillatory schemes

Numerical experiments for the SONIC schemes on 2D inviscid, compressible, steady, and unsteady problems are presented. These schemes belong to a new class of uniformly second-order accurate nonoscillatory schemes introduced by Huynh, with the well known UNO2 scheme of Harten and Osher being the most 'diffusive' in this class. The SONIC schemes can also be considered as uniformly second order accurate extensions of the popular TVD schemes. For simplicity, a MUSCL approach for spatial discretization and a Runge-Kutta method for time integration are used. Test problems include steady oblique shock reflection and the well known unsteady double Mach reflection problem. Results confirm that the SONIC schemes are more accurate than their TVD counterparts.

Suresh, Ambady↗
NASA NTRS1992

Protostellar hydrodynamics: Constructing and testing a spatially and temporally second-order-accurate method. I - Spherical coordinates

Two related numerical schemes for calculating the 3D collapse of protostellar clouds are defined, developed, and checked on a wide variety of test problems in spherical symmetry and multiple dimensions. One scheme is first-order accurate in time (code S), and the other second-order accurate in time (code ST). Through convergence testing, the codes are shown to be second-order accurate in spatial differences. Compared with the previous 3D code, the combination of reduced numerical dissipation through second-order accuracy and of removing the systematic bias toward central concentrations implies that the tendency for fragmentation into binary or multiple protostars should increase. A reinvestigation of fragmentation as a mechanism for forming binary stars is expected to yield an even more favorable evaluation.

Boss, Alan P.↗
NASA NTRS1992

Variable frequency pulsed phase-locked loop method for measuring material nonlinearity

The design of a pressure vessel with an isothermal volume to measure changes in the natural velocities of material continuously over a wide temperature range is reported. Highly sensitive pulsed phase-locked loop technology is used to measure the natural velocity of fatigued aluminum 2024-T4 as a function of pressure at different temperatures. Second derivative variations with respect to pressure and temperature are found to exhibit order-of-magnitude changes at a gauge pressure near 950 kPa at room temperature. This indicates a significant change in certain combinations of second-order and higher-order elastic constants at relatively low pressures. Fractional frequency change as a function of applied pressure for aluminum 2024-T4 with fatigue damage is illustrated.

Yost, William T.↗
NASA NTRS1992

The Burnett shock structures in low density hypersonic flows

One-dimensional shock structures in low density hypersonic flows have been studied numerically by solving the Burnett and Navier-Stokes equations. A new lower-upper scheme has been developed to obtain the steady and stationary normal shock solutions by the time-marching technique. The new scheme directly employs the implicit finite difference method without computing the eigenvalues, and it is first-order accurate in time and second-order accurate in space. The computed shock structures have been compared with available experimental data, and they are in good agreements. Numerical results show that the Burnett calculations has less numerical diffusion than the Navier-Stokes calculations does. As to the shock thickness, the Burnett solutions are apparently superior than the Navier-Stokes solutions.

Liaw, Goang-Shin↗
NASA NTRS1992

Analyzing high dimensional data

Problems encountered in analyzing high dimensional data are discussed and possible solutions are proposed. The increased importance of second-order statistics in analyzing high dimensional data and the shortcoming of the minimum distance classifier in high dimensional data are recognized. By investigating characteristics of high dimensional data, it is shown that second-order statistics must be taken into account in high dimensional data. There is a need to represent second order statistics effectively. As the data dimensionality increases, it becomes more difficult to perceive and compare information present in statistics derived from data. In order to overcome this problem, a method to visualize statistics using color code is proposed. By representing statistics using a color code, the first and the second statistics can be more readily compared.

Lee, Chulhee↗
NASA NTRS1951

On the particular integrals of the Prandtl-Busemann iteration equations for the flow of a compressible fluid

The particular integrals of the second-order and third-order Prandtl-Busemann iteration equations for the flow of a compressible fluid are obtained by means of the method in which the complex conjugate variables are utilized as the independent variables of the analysis. The assumption is made that the Prandtl-Glauert solution of the linearized or first-order iteration equation for the two-dimensional flow of a compressible fluid is known. The forms of the particular integrals, derived for subsonic flow, are readily adapted to supersonic flows with only a change in sign of one of the parameters of the problem.

Kaplan, Carl↗
NASA NTRS1990

Computation of three-dimensional compressible boundary layers to fourth-order accuracy on wings and fuselages

A solution method, fourth-order accurate in the body-normal direction and second-order accurate in the stream surface directions, to solve the compressible 3-D boundary layer equations is presented. The transformation used, the discretization details, and the solution procedure are described. Ten validation cases of varying complexity are presented and results of calculation given. The results range from subsonic flow to supersonic flow and involve 2-D or 3-D geometries. Applications to laminar flow past wing and fuselage-type bodies are discussed. An interface procedure is used to solve the surface Euler equations with the inviscid flow pressure field as the input to assure accurate boundary conditions at the boundary layer edge. Complete details of the computer program used and information necessary to run each of the test cases are given in the Appendix.

Iyer, Venkit↗