SEARCH · Engineering Papers

Results for “robust clustering”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

All sources NASA NTRS DOE OSTI

DOE OSTI2024

The Atacama Cosmology Telescope: Mitigating the Impact of Extragalactic Foregrounds for the DR6 Cosmic Microwave Background Lensing Analysis

We investigate the impact and mitigation of extragalactic foregrounds for the cosmic microwave background (CMB) lensing power spectrum analysis of Atacama Cosmology Telescope (ACT) data release 6 (DR6) data. Two independent microwave sky simulations are used to test a range of mitigation strategies. We demonstrate that finding and then subtracting point sources, finding and then subtracting models of clusters, and using a profile bias-hardened lensing estimator together reduce the fractional biases to well below statistical uncertainties, with the inferred lensing amplitude, A lens , biased by less than 0.2σ. We also show that another method where a model for the cosmic infrared background (CIB) contribution is deprojected and high-frequency data from Planck is included has similar performance. Other frequency-cleaned options do not perform as well, either incurring a large noise cost or resulting in biased recovery of the lensing spectrum. In addition to these simulation-based tests, we also present null tests on the ACT DR6 data for sensitivity of our lensing spectrum estimation to differences in foreground levels between the two ACT frequencies used, while nulling the CMB lensing signal. These tests pass whether the nulling is performed at the map or bandpower level. The CIB-deprojected measurement performed on the DR6 data is consistent with our baseline measurement, implying that contamination from the CIB is unlikely to significantly bias the DR6 lensing spectrum. This collection of tests gives confidence that the ACT DR6 lensing measurements and cosmological constraints presented in companion papers to this work are robust to extragalactic foregrounds.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2025

Boosting H I -Galaxy Cross-Clustering Signal through Higher-Order Cross-Correlations

After reionization, neutral hydrogen (${\rm H\, \small {I}}$) traces the large-scale structure (LSS) of the Universe, enabling ${\rm H\, \small {I}}$ intensity mapping (IM) to capture the LSS in 3D and constrain key cosmological parameters. We present a new framework utilizing higher-order cross-correlations to study ${\rm H\, \small {I}}$ clustering around galaxies, tested using real-space data from the IllustrisTNG300 simulation. This approach computes the joint distributions of k-nearest neighbor (kNN) optical galaxies and the ${\rm H\, \small {I}}$ brightness temperature field smoothed at relevant scales (the kNN-field framework), providing sensitivity to all higher-order cross-correlations, unlike two-point statistics. To simulate ${\rm H\, \small {I}}$ data from actual surveys, we add random thermal noise and apply a simple foreground cleaning model, filtering out Fourier modes of the brightness temperature field with k ∥ < k min,∥ . Under current levels of thermal noise and foreground cleaning, typical of a Canadian Hydrogen Intensity Mapping Experiment (CHIME)-like survey, the ${\rm H\, \small {I}}$-galaxy cross-correlation signal in our simulations, using the kNN-field framework, is detectable at >30σ across r = [3, 12] h –1 Mpc. In contrast, the detectability of the standard two-point correlation function (2PCF) over the same scales depends strongly on the foreground filter: a sharp k ∥ filter can spuriously boost detection to 8σ due to position-space ringing, whereas a less sharp filter yields no detection. Nonetheless, we conclude that kNN-field cross-correlations are robustly detectable across a broad range of foreground filtering and thermal noise conditions, suggesting their potential for enhanced constraining power over 2PCFs.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2020

Automated Coupling of Nanodroplet Sample Preparation with Liquid Chromatography–Mass Spectrometry for High-Throughput Single-Cell Proteomics

Single-cell proteomics can provide critical biological insight into the cellular heterogeneity that is masked by bulk-scale analysis. Here, we have developed a nanoPOTS (nanodroplet processing in one pot for trace samples) platform and demonstrated its broad applicability for single-cell proteomics. However, because of nanoliter-scale sample volumes, the nanoPOTS platform is not compatible with automated LC-MS systems, which significantly limits sample throughput and robustness. To address this challenge, we have developed a nanoPOTS autosampler allowing fully automated sample injection from nanowells to LC-MS systems. We also developed a sample drying, extraction, and loading workflow to enable reproducible and reliable sample injection. The sequential analysis of 20 samples containing 10 ng tryptic peptides demonstrated high reproducibility with correlation coefficients of >0.995 between any two samples. The nanoPOTS autosampler can provide analysis throughput of 9.6, 16, and 24 single cells per day using 120, 60, and 30 min LC gradients, respectively. As a demonstration for single-cell proteomics, the autosampler was first applied to profiling protein expression in single MCF10A cells using a label-free approach. At a throughput of 24 single cells per day, an average of 256 proteins was identified from each cell and the number was increased to 731 when the Match Between Runs algorithm of MaxQuant was used. Using a multiplexed isobaric labeling approach (TMT-11plex), ~77 single cells could be analyzed per day. We analyzed 152 cells from three acute myeloid leukemia cell lines, resulting in a total of 2558 identified proteins with 1465 proteins quantifiable (70% valid values) across the 152 cells. These data showed quantitative single-cell proteomics can cluster cells to distinct groups and reveal functionally distinct differences.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2022

Reaching for the Edge I: probing the outskirts of massive galaxies with HSC, DECaLS, SDSS, and Dragonfly

ABSTRACT The outer light (stellar haloes) of massive galaxies has recently emerged as a possible low scatter tracer of dark matter halo mass. To test the robustness of outer light measurements across different data sets, we compare the 1D azimuthally averaged surface brightness profiles of massive galaxies using four independent data sets: the Hyper Suprime-Cam survey (HSC), the Dark Energy Camera Legacy Survey (DECaLS), the Sloan Digital Sky Survey (SDSS), and the Dragonfly Wide Field Survey (Dragonfly). We test the sky subtraction and proposed corrections for HSC and DECaLS. For galaxies at z < 0.05, Dragonfly has the best control of systematics, reaching surface brightness levels of μr ≈ 30 mag arcsec−2. At 0.19 < z < 0.50, HSC can reliably recover individual surface brightness profiles to μr ≈ 28.5 mag arcsec−2 (R = 100–150 kpc in semimajor axis). In a statistical sense, DECaLS agrees with HSC to R > 200 kpc. DECaLS and HSC measurements of the stellar mass contained within 100 kpc agree within 0.05 dex. Finally, we use weak lensing to show that measurements of outer light with DECaLS at 0.19 < z < 0.50 show a similar promise as HSC as a low scatter proxy of halo mass. The tests and results from this paper represent an important step forward for accurate measurements of the outer light of massive galaxies and demonstrate that outer light measurements from DECam imaging will be a promising method for finding galaxy clusters.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2026

The high level trigger and express data production at STAR

To meet the demands of the Beam Energy Scan phase-II (BES-II) program, the STAR experiment at the Relativistic Heavy Ion Collider (RHIC) developed a dual real-time framework consisting of a High Level Trigger (HLT) and an Express Data Production system (xProduction). The HLT operates online within the Data Acquisition (DAQ) chain on a dedicated multi-core CPU cluster with the option to offload compute-intensive kernels to Xeon Phi coprocessors. It uses parallelized algorithms, such as the Cellular Automaton (CA) Track Finder, to perform rapid tracking, vertexing, and event filtering. This allows it to select events of interest in real time and provide immediate feedback on detector and beam conditions. In contrast, the xProduction workflow runs concurrently and independently of the DAQ loop. It applies near offline-quality calibration and reconstruction within hours of data collection. The xProduction input is the express data stream, whose content can be enriched by HLT trigger/priority selections under DAQ/HLT resource constraints, and it uses the STAR calibration/conditions framework, incorporating online calibration/QA information when available. This enables early preliminary physics analysis, including the reconstruction of rare signals, such as hyperons and hypernuclei. It also provides collaboration-wide access to analysis-ready datasets. Together, the HLT and xProduction systems form a complementary architecture: the HLT performs online event selection while the xProduction chain delivers high-quality results within a short amount of time. This integrated framework has enabled the prompt reconstruction of the $^5_Λ$ He hypernucleus with high statistical significance and the efficient processing of hundreds of millions of heavy-ion collision events. In conclusion, its demonstrated scalability and robustness establish a model for future high-luminosity experiments requiring both online event filtering and rapid access to analysis-quality data.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DOE OSTI2026

Concordant Mode Approach (CMA): Vibrational Analysis of New and Upgraded Intermolecular Benchmarks for Noncovalent Bonding

The Concordant Mode Approach (CMA) is a novel method that offers tremendous potential for increasing the system size and the level of theory attainable in quantum chemical computations of molecular vibrational frequencies. To investigate the extension of CMA to intermolecular vibrations, computations with coupled cluster singles and doubles with perturbative triples theory [CCSD(T)] using two augmented correlation-consistent polarized-valence triple-ζ basis sets (aug-cc-pVTZ or h-aug-ccpVTZ) were performed on 17 prototypical loosely bound complexes of hydrogen-bonded, dispersion, and mixed character. These Level A results provide new and upgraded benchmarks for noncovalent bonding and a severe test for CMA vibrational analyses. The Level A target frequencies were recovered remarkably well using second-order Møller−Plesset perturbation theory (MP2) with h-aug-cc-pVTZ for generating the underlying (Level B) normal modes of the CMA scheme. Employing this Level B within the lowest-rung CMA-0A method reproduces the 435 benchmark frequencies with a mean absolute error (MAE) of 0.23 cm −1 and a corresponding standard deviation (σ) of 0.84 cm −1 ; strikingly, the corresponding subset of 106 interfragment frequencies exhibits MAE = 0.34 cm −1 and σ = 0.90 cm −1 . Subsequent application of the higher-rung CMA-2A scheme eliminates all outliers and reduces the overall MAE to a minuscule 0.08 cm −1 with the inclusion of only 3.0% of the off-diagonal couplings not accounted for by CMA-0A. Accordingly, the highly efficient CMA methodology proves to be robust even for vibrations on flat potential energy surfaces.

Aromatic compounds↗

DOE OSTI2022

Machine Learning Assisted HPC Workload Trace Generation for Leadership Scale Storage Systems

Monitoring and analyzing a wide range of I/O activities in an HPC cluster is important in maintaining mission-critical performance in a large-scale, multi-user, parallel storage system. Center-wide I/O traces can provide high-level information and fine-grained activities per application or per user running in the system. Studying such large-scale traces can provide helpful insights into the system. It can be used to develop predictive methods for making predictive decisions, adjusting scheduling policies, or providing decisions for the design of next-generation systems. However, sharing real-world I/O traces to expedite such research efforts leaves a few concerns; i) the cost of sharing the large traces is expensive due to this large size, and ii) privacy concern is an issue.We address such issues by building an end-to-end machine learn- ing (ML) workflow that can generate I/O traces for large-scale HPC applications. We leverage ML based feature selection and gener- ative models for I/O trace generation. The generative models are trained on I/O traces collected by the darshan I/O characterization tool over a period of one year. We present a two-step generation process consisting of two deep-learning models, called the feature generator and the trace generator. The combination of two-step generative models provides robustness by reducing the bias of the model and accounting for the stochastic nature of the I/O traces across different runs of an application. We evaluate the performance of the generative models and show that the two-step model can generate time-series I/O traces with less than 20% root mean square error.

Paul, Arnab↗

DOE OSTI2021

Probing the galaxy–halo connection with total satellite luminosity

ABSTRACT We demonstrate how the total luminosity in satellite galaxies is a powerful probe of dark matter haloes around central galaxies. The method cross-correlates central galaxies in spectroscopic galaxy samples with fainter galaxies detected in photometric surveys. Using models, we show that the total galaxy luminosity, Lsat, scales linearly with host halo mass, making Lsat an excellent proxy for Mh. Lsat is also sensitive to the formation time of the halo. We demonstrate that probes of galaxy large-scale environment can break this degeneracy. Although this is an indirect probe of the halo, it yields a high signal-to-noise ratio measurement for galaxies expected to occupy haloes at <1012 M⊙, where other methods suffer from larger errors. In this paper, we focus on observational and theoretical systematics in the Lsat method. We test the robustness of our method of finding central galaxies and our methods of estimating the number of background galaxies. We implement this method on galaxies in the Sloan Digital Sky Survey (SDSS) data, with satellites identified in fainter imaging data. We find excellent agreement between our theoretical predictions and the observational measurements. Finally, we compare our Lsat measurements to weak lensing estimates of Mh for red and blue subsamples. In the stellar mass range where the measurements overlap, we find consistent results, where red galaxies live in larger haloes. However, the Lsat approach allows us to probe significantly lower mass galaxies. At these masses, the Lsat values are equivalent. This example shows the potential of Lsat as a probe of dark haloes.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2022

Quantifying the effects of varietal types × management on the spatial variability of sorghum biomass across US environments

Abstract Regional‐scale estimations of sorghum biomass production allow identification of optimum genotype×environment×management (G×E×M) combinations for bioenergy generation. The objective of this study was to determine the degree of contributions of G, E, and M toward variability in sorghum biomass in the United States. Using the Agricultural Production Systems sIMulator in a grid computing platform, biomass was simulated for irrigated and rainfed conditions for 30 years across the United States for four sorghum varietal types (grain—GS, sudangrass—SS, photosensitive—PS, and photo‐insensitive—PI). Simulated biomass was assessed by environments clustered using the sum of intercepted solar radiation ( ir ), mean of temperature stress factor ( tp ) and water stress factor ( sw ). Simulated biomass ranged from 5.8 t ha −1 (GS‐rainfed) to 27.5 t ha −1 (PI‐irrigated). Under high‐temperature environments (mean annual temperature = 25°C), rainfed biomass between 40 and 80 days after planting (DAP) was strongly correlated with sw ( r = 0.64–0.86) and irrigated biomass with ir ( r = 0.68–0.81). Under low‐temperature environments (mean annual temperature = 18°C) after 40 DAP, tp and ir had greater effects than sw ( r = 0.55–0.82). Biomass variance was mainly explained by varietal type (50%–76%) in all environments×irrigation combinations, except in the high‐ and mid‐temperature environments under rainfed conditions where rainfall had the major effect (25%–45%). However, when mean temperature during the growing season decreased from 25°C (high environments) to 18°C (low environments), the contribution of mean temperature to biomass variance increased from 7% to 34% (rainfed) and from 4% to 36% (irrigated). Varietal type had the larger interactions with other factors independently of the environment and irrigation. We demonstrated a need to quantify (i) the main G×E×M drivers of biomass variability based on environmental stress factors and (ii) the variance contribution of these drivers on sorghum biomass. Our regional‐scale estimations are key inputs for future robust biomass projections of energy sorghum genotypes integrating G×E×M under climate change scenarios.

Ojeda, Jonathan J.↗

DOE OSTI2023

Cycling of block copolymer composites with lithium-conducting ceramic nanoparticles

Solid polymer and perovskite-type ceramic electrolytes have both shown promise in advancing solid-state lithium metal batteries. Despite their favorable interfacial stability against lithium metal, polymer electrolytes face issues due to their low ionic conductivity and poor mechanical strength. Highly conductive and mechanically robust ceramics, on the other hand, cannot physically remain in contact with redox-active particles that expand and contract during charge-discharge cycles unless excessive pressures are used. To overcome the disadvantages of each material, polymer-ceramic composites can be formed; however, depletion interactions will always lead to aggregation of the ceramic particles if a homopolymer above its melting temperature is used. In this study, we incorporate Li 0.33 La 0.56 TiO 3 (LLTO) nanoparticles into a block copolymer, polystyrene- b -poly (ethylene oxide) (SEO), to develop a polymer-composite electrolyte (SEO-LLTO). TEMs of the same nanoparticles in polyethylene oxide (PEO) show highly aggregated particles whereas a significant fraction of the nanoparticles are dispersed within the PEO-rich lamellae of the SEO-LLTO electrolyte. We use synchrotron hard x-ray microtomography to study the cell failure and interfacial stability of SEO-LLTO in cycled lithium-lithium symmetric cells. Three-dimensional tomograms reveal the formation of large globular lithium structures in the vicinity of the LLTO aggregates. Encasing the SEO-LLTO between layers of SEO to form a “sandwich” electrolyte, we prevent direct contact of LLTO with lithium metal, which allows for the passage of seven-fold higher current densities without signatures of lithium deposition around LLTO. We posit that eliminating particle clustering and direct contact of LLTO and lithium metal through dry processing techniques is crucial to enabling composite electrolytes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2024

Dark Energy Survey: A 2.1% measurement of the angular baryonic acoustic oscillation scale at redshift z eff = 0.85 from the final dataset

Here, we present the angular diameter distance measurement obtained with the baryonic acoustic oscillation (BAO) feature from galaxy clustering in the completed Dark Energy Survey, consisting of six years (Y6) of observations. We use the Y6 BAO galaxy sample, optimized for BAO science in the redshift range 0.6 < z <1.2, with an effective redshift at z eff = 0.85 and split into six tomographic bins. The sample has nearly 16 million galaxies over 4,273 square degrees. Our consensus measurement constrains the ratio of the angular distance to sound horizon scale to D M ⁡(z eff )/r d = 19.51 ± 0.41 (at 68.3% confidence interval), resulting from comparing the BAO position in our data to that predicted by planck Λ⁢CDM via the BAO shift parameter α =(D M /r d )/(D M /r d ) PLANCK . To achieve this, the BAO shift is measured with three different methods, angular correlation function (ACF), angular power spectrum (APS), and projected correlation function (PCF), obtaining α = 0.952 ± 0.023, 0.962 ± 0.022, and 0.955 ± 0.020, respectively, which we combine to α = 0.957 ± 0.020, including systematic errors. When compared with the Λ⁢CDM model that best fits planck data, this measurement is found to be 4.3% and 2.1⁢σ below the angular BAO scale predicted. To date, it represents the most precise angular BAO measurement at z > 0.75 from any survey and the most precise measurement at any redshift from photometric surveys. The analysis was performed blinded to the BAO position, and it is shown to be robust against analysis choices, data removal, redshift calibrations, and observational systematics.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2024

Km‐Scale Simulations of Mesoscale Convective Systems Over South America—A Feature Tracker Intercomparison

Mesoscale convective systems (MCSs) are clusters of thunderstorms that are important in Earth's water and energy cycle. Additionally, they are responsible for extreme events such as large hail, strong winds, and extreme precipitation. Automated object-based analyses that track MCSs have become popular since they allow us to identify and follow MCSs over their entire life cycle in a Lagrangian framework. This rise in popularity was accompanied by an increasing number of MCS tracking algorithms, however, little is known about how sensitive analyses are concerning the MCS tracker formulation. Here, we assess differences between six MCS tracking algorithms on South American MCS characteristics and evaluate MCSs in kilometer-scale simulations with observational-based MCSs over 3 years. All trackers are run with a common set of MCS classification criteria to isolate tracker formulation differences. The tracker formulation substantially impacts MCS characteristics such as frequency, size, duration, and contribution to total precipitation. The evaluation of simulated MCS characteristics is less sensitive to the tracker formulation and all trackers agree that the model can capture MCS characteristics well across different South American climate zones. Dominant sources of uncertainty are the segmentation of cloud systems in space and time and the treatment of how MCSs are linked in time. Our results highlight that comparing MCS analyses that use different tracking algorithms is challenging. We provide general guidelines on how MCS characteristics compare between trackers to facilitate a more robust assessment of MCS statistics in future studies.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2026

A scalable variational method for estimating the latent infection-rate field of an outbreak

In this paper, we explore whether the infection-rate of a disease can serve as a robust monitoring variable in epidemiological surveillance algorithms. The infection-rate is dependent on population mixing patterns that do not vary erratically day-to-day; in contrast, daily case-counts used in contemporary surveillance algorithms are corrupted by reporting errors. The technical challenge lies in estimating the latent infection-rate from case-counts. Here we devise a Bayesian method to estimate the infection-rate across multiple adjoining areal units, and then use it, via an anomaly detector, to discern a change in epidemiological dynamics. We extend an existing model for estimating the infection-rate in an areal unit by incorporating a Markov random field model, so that we may estimate infection-rates across multiple areal units, while preserving spatial correlations observed in the epidemiological dynamics. To carry out the high-dimensional Bayesian inverse problem, we develop an implementation of mean-field variational inference specific to the infection model and integrate it with the random field model to incorporate correlations across counties. The method is tested on estimating the COVID-19 infection-rates across all 33 counties in New Mexico using data from the summer of 2020, and then employing them to detect the arrival of the Fall 2020 COVID-19 wave. We perform the detection using a temporal algorithm that is applied county-by-county. We also show how the infection-rate field can be used to cluster counties with similar epidemiological dynamics.

60 APPLIED LIFE SCIENCES↗

DOE OSTI2021

Dark Energy Survey Year 3 results: Optimizing the lens sample in a combined galaxy clustering and galaxy-galaxy lensing analysis

We investigate potential gains in cosmological constraints from the combination of galaxy clustering and galaxy-galaxy lensing by optimizing the lens galaxy sample selection using information from Dark Energy Survey (DES) Year 3 data and assuming the DES Year 1 metacalibration sample for the sources. We explore easily reproducible selections based on magnitude cuts in i-band as a function of (photometric) redshift, zphot, and benchmark the potential gains against those using the well-established redMaGiC [E. Rozo et al., Mon. Not. R. Astron. Soc. 461, 1431 (2016)MNRAA40035-871110.1093/mnras/stw1281] sample. We focus on the balance between density and photometric redshift accuracy, while marginalizing over a realistic set of cosmological and systematic parameters. Our optimal selection, the MagLim sample, satisfies i<4zphot+18 and has ∼30% wider redshift distributions but ∼3.5 times more galaxies than redMaGiC. Assuming a wCDM model (i.e. with a free parameter for the dark energy equation of state) and equivalent scale cuts to mitigate nonlinear effects, this leads to 40% increase in the figure of merit for the pair combinations of Ωm, w, and σ8, and gains of 16% in σ8, 10% in Ωm, and 12% in w. Similarly, in ΛCDM, we find an improvement of 19% and 27% on σ8 and Ωm, respectively. We also explore flux-limited samples with a flat magnitude cut finding that the optimal selection, i<22.2, has ∼7 times more galaxies and ∼20% wider redshift distributions compared to MagLim, but slightly worse constraints. We show that our results are robust with respect to the assumed galaxy bias and photometric redshift uncertainties with only moderate further gains from increased number of tomographic bins or the inclusion of bin cross-correlations, except in the case of the flux-limited sample, for which these gains are more significant.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2026

Alleviating prior dependencies for DESI DR1 clustering fits through reparameterization

Bayesian analyses of the full-shape clustering of Dark Energy Spectroscopic Instrument (DESI) Data Release 1 (DR1) exhibit prior-volume projection effects, whereby weakly constrained nuisance parameters of the Effective Field Theory of Large Scale Structure (EFTofLSS) shift marginalized cosmological posteriors away from the posterior maximum. We reanalyze DESI DR1 power spectrum multipoles using two complementary mitigation strategies: (i) nonlinear orthogonalization to decorrelate nuisance and cosmological parameter priors, and (ii) a fully reparameterization-invariant Jeffreys prior over all EFTofLSS coefficients, evaluated on-the-fly via closed-form Jacobians. Including data from DESI, Big-Bang Nuclesynthesis and a constraint on $n_{\mathrm{s}}$, baseline priors lead to multi-$σ$ projection in the Hubble parameter $H_{0}$ and dark energy equation of state parameters $w_{0}$ and $w_{a}$; the Jeffreys prior successfully recenters these posteriors to enclose the maximum a posteriori estimate within the 68% credible regions, demonstrating clear mitigation of projection effects for these late-time expansion parameters. A hybrid Jeffreys+baseline-Gaussian configuration controls residual over-broad tails in the physical cold dark matter density $ω_{\mathrm{c}}$ while preserving the volume correction, and is our favoured approach. We compare the credible intervals derived using our methodology to those obtained using Halo Occupation Distribution (HOD)-informed priors and to confidence intervals derived using frequentist profile likelihood analyses, finding agreement in both central values and degeneracy directions in the $w_{0}$--$w_{a}$ plane. This demonstrates that, once projection effects are properly controlled, we can make robust inferences about the late-time cosmological expansion independent of the statistical framework adopted.

Bonici, M. [Waterloo U.; Perimeter Inst. Theor. Ph↗

DOE OSTI2020

Almost medium-free measurement of the Hoyle state direct-decay component with a TPC

The structure of the Hoyle state, a highly α -clustered state at 7.65 MeV in 12 C, has long been the subject of debate. Understanding if the system comprises of three weakly interacting α particles in the 0s orbital, known as an α-condensate state, is possible by studying the decay branches of the Hoyle state. The direct decay of the Hoyle state into three α particles, rather than through the 8 Be ground state, can be identified by studying the energy partition of the three α particles arising from the decay. This paper provides details on the breakup mechanism of the Hoyle stating using a new experimental technique. Method: By using β-delayed charged-particle spectroscopy of 12 N using the Texas active target time-projection chamber, a high-sensitivity measurement of the direct 3α decay ratio can be performed without contributions from pileup events. A Bayesian approach to understanding the contribution of the direct components via a likelihood function shows that the direct component is <0.043% at the 95% confidence level. This value is in agreement with several other studies, and, here, we can demonstrate that a small nonsequential component with a decay fraction of about 10 –4 is most likely. Here, the measurement of the non-sequential component of the Hoyle state decay is performed in an almost medium-free reaction for the first time. The derived upper limit is in agreement with previous studies and demonstrates sensitivity to the absolute branching ratio. Further experimental studies would need to be combined with robust microscopic theoretical understanding of the decay dynamics to provide additional insight into the idea of the Hoyle state as an α condensate.

6 ≤ A ≤ 19↗

DOE OSTI2021

Magnetic structure, excitations and short-range order in honeycomb Na 2 Ni 2 TeO 6

Na 2 Ni 2 TeO 6 has a layered hexagonal structure with a honeycomb lattice constituted by Ni 2+ and a chiral charge distribution of Na + that resides between the Ni layers. In the present work, the antiferromagnetic transition temperature of Na 2 Ni 2 TeO 6 is confirmed at TN˜ 27 K, and further, it is found to be robust up to 8 T magnetic field and 1.2 GPa external pressure; and, without any frequency-dependence. Slight deviations from nominal Na-content (up to 5%) does not seem to influence the magnetic transition temperature, TN. Isothermal magnetization curves remain almost linear up to 13 T. Our analysis of neutron diffraction data shows that the magnetic structure of Na 2 Ni 2 TeO 6 is faithfully described by a model consisting of two phases described by the commensurate wave vectors vec kc, (0.5 0 0) and (0.5 0 0.5), with an additional short-range order component incorporated in to the latter phase. Consequently, a zig-zag long-range ordered magnetic phase of Ni 2+ results in the compound, mixed with a short-range ordered phase, which is supported by our specific heat data. Theoretical computations based on density functional theory (DFT) predict predominantly in-plane magnetic exchange interactions that conform to a J1-J2-J3 model with a strong J3 term. The computationally predicted parameters lead to a reliable estimate for TN and the experimentally observed zig-zag magnetic structure. A spin wave excitation in Na 2 Ni 2 TeO 6 at E ˜ 5 meV at T = 5 K is mapped out through inelastic neutron scattering experiments, which is reproduced by linear spin wave theory calculations using the J values from our computations. Our specific heat data and inelastic neutron scattering data strongly indicate the presence of short-range spin correlations, at T > TN, stemming from incipient antiferromagnetic clusters.

36 MATERIALS SCIENCE↗

DOE OSTI2026

Cosmological constraints from the DESI DR1 joint power spectrum and bispectrum analysis

We derive cosmological parameter constraints from the Dark Energy Spectroscopic Instrument (DESI) Data Release 1 (DR1) galaxy clustering data, based on a joint full-shape analysis of the power spectrum multipoles and the bispectrum monopole using the ShapeFit framework. This is the follow-up of our previous work, in which we obtained for the first time constraints on the ShapeFit parameters using the bispectrum of DESI DR1. Here we present the first ShapeFit cosmological inference results using the bispectrum of DESI DR1. We recover values for the matter density parameter and Hubble constant of respectively $Ω_m=0.310\pm0.012$ and $H_0=[68.92\pm0.97]\,\mathrm{km\, s^{-1} Mpc^{-1}}$, consistent with previous results from the full DESI DR1 dataset that did not use the bispectrum signal. The inclusion of the bispectrum significantly tightens the constraints on the amplitude of fluctuations, reducing the error-bars in $\ln(A_s\times10^{10})$ by approximately 20%, compared to using the power spectrum alone. We also explore extended cosmological models by performing fits for the evolving dark energy equation of state $w_0w_a$, and the sum of neutrino masses $\sum m_ν$. In these cases, we obtain constraints slightly larger than the ones from previous works from the DESI collaboration, due to not combining the full-shape results with other probes in all tracers. We find no strong evidence of deviations from standard $Λ$CDM, with the dark energy equation-of-state remaining within 2$σ$ from a cosmological constant $Λ$, and the neutrino mass being consistent with the normal hierarchy, $\sum m_ν<0.1\,[eV]$ at 95% confidence limit. These constraints are broadly consistent with other DESI DR1 analyses, thus validating the robustness of the ShapeFit compression approach and the inclusion of the bispectrum for cosmological inference.

Novell-Masot, S. [ICC, Barcelona U.; Geneva U., De↗