Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “reliability prediction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

Momentum transfer and plasma rotation caused by destabilized eigenmodes in tokamaks

In this work, the influence of magnetohydrodynamic eigenmodes destabilized by energetic ions on the momentum of these ions and concomitant sheared plasma rotation are studied. Two mechanisms affecting rotation are revealed: (i) spatial channelling (SC) – radially separated emission and absorption of the momentum; (ii) mode induced redistribution (MIR) across the magnetic field of the momentum of energetic ions. Forces arising during SC and MIR produce both toroidal and poloidal rotations. In addition, the momentum emission during SC leads to a radial flux of fast ions and generation of a radial electric field. Using the developed theory, estimates were made for the ITER (International Thermonuclear Experimental Reactor) 15 MA baseline scenario. They show that a global toroidicity-induced Alfvén eigenmode destabilized by alpha particles and neutral beam injection can result in significant radial electric field and forces applied to plasma. However, available data are not sufficient for a reliable prediction of the effects of SC and MIR in ITER. In general, one can expect that sheared rotation arising after destabilization of Alfvén modes and fast magnetoacoustic modes by energetic ions will tend to suppress the turbulence and improve plasma performance. The importance of plasma rotation is supported, in particular, by the fact that during the JET DTE1 experimental campaign the best parameters were achieved in a deuterium–tritium discharge where the rotation frequency was largest.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Radiative and continuum dampings of reversed shear Alfvén eigenmodes and perturbative analysis limitations for tokamaks

A careful theoretical analysis of the excitation of Alfvén eigenmodes (AEs), such as TAE (toroidicity-induced AE) and RSAE (reversed shear AE), by superalfvenic energetic particles is required for reliable predictions of energetic ion relaxation in present day fusion experiments. This includes the evaluation of different AE damping mechanisms including radiative and continuum dampings which are the focus of this study. A recent comprehensive benchmark of different eigenmode solvers including gyrokinetic, gyrofluid and hybrid magenetohydrodynamics (MHD) has shown that employed models may have deficiencies when addressing some of them (Taimourzadeh et al., Nucl. Fusion, vol. 59, 2019, 066006). Here, in this paper, we are studying the radiative and continuum dampings of RSAEs in details which were missing in hybrid NOVA/NOVA-C calculations to prepare a NOVA-C package with a substantial upgrade. Both dampings require the finite Larmor radius (FLR) corrections to AE mode structures to be accounted for. Accurately calculating different damping rates and understanding their parametric dependencies, we resolve the limitation coming out of the perturbative approach. In particular, here, the radiative damping is included perturbatively, whereas the continuum damping is computed non-perturbatively. Our comparison leads to the conclusion that the non-perturbative treatment of the unstable RSAE modes is needed to find the agreement with the gyrokinetic calculations. We expect that the RSAE mode structure modification plays a dominant role in determining the RSAE stability.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Ab Initio Reactive Computer Aided Molecular Design

Few would dispute that theoretical chemistry tools can now provide keen insights into chemical phenomena. Yet the holy grail of efficient and reliable prediction of complex reactivity has remained elusive. Fortunately, recent advances in electronic structure theory based on the concepts of both element- and rank-sparsity, coupled with the emergence of new highly parallel computer architectures, have led to a significant increase in the time and length scales which can be simulated using first principles molecular dynamics. This then opens the possibility of new discovery-based approaches to chemical reactivity, such as the recently proposed ab initio nanoreactor. Here, we argue that due to these and other recent advances, the holy grail of computational discovery for complex chemical reactivity is rapidly coming within our reach.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Release of Electron Donors during Thermal Treatment of Soils

Thermal treatment of soil and groundwater may provide an in situ source of soluble organic compounds and hydrogen (H 2 ) that could stimulate microbial reductive dechlorination (MRD) at sites impacted by chlorinated solvents. The objectives of this study were to identify and quantify the release of electron donors and fermentable precursors during soil heating and to estimate availability of these compounds following thermal treatment. Fourteen solid materials containing <0.01 to 63.81 wt % organic carbon (OC) were incubated at 30, 60, or 90 °C for up to 180 d, leading to the release of direct electron donors (i.e., H 2 and acetate) and fermentable volatile fatty acids (VFAs). Total VFA release ranged from 5 ± 0 × 10 –9 carbon per gram solid (mol C/gs) during 30 °C incubation of quartz sand to 820 ± 50 × 10 –6 mol C/gs during 90 °C incubation of humic acid, and was positively impacted by incubation time, temperature, and solid-phase OC content. H 2 gas was detected at a maximum of 180 ± 50 × 10 –9 mol H 2 /g s , accounting for less than 0.3% of reducing equivalents associated with VFAs released under the same conditions. These findings will allow for more reliable prediction of substrate release during thermal treatment, supporting the implementation of coupled thermal and biological remediation strategies.

54 ENVIRONMENTAL SCIENCES↗

General H2O Outgassing Model Applicable to Silica-Filled Silicones

Moisture-induced agining and degradation are continuing concerns in long-term storage and use of silicone materials. The silica fillers frequently used to provide mechanical reinforcement in silicone formulations have a high affinity for H2O and act as a source of moisture outgassing later when placed in dry or vacuum applications.

36 MATERIALS SCIENCE↗

Improving Bond Dissociations of Reactive Machine Learning Potentials through Physics-Constrained Data Augmentation

In the field of computational chemistry, predicting bond dissociation energies (BDEs) presents well-known challenges, particularly due to the multireference character of reactive systems. Many chemical reactions involve configurations where single-reference methods fall short, as the electronic structure can significantly change during bond breaking. As generating training data for partially broken bonds is a challenging task, even state-of-the-art reactive machine learning interatomic potentials (MLIPs) often fail to predict reliable BDEs and smooth dissociation curves. By contrast, simple and inexpensive physics-based models, such as the well-established Morse potential, do not suffer from any such limitations. This work leverages the Morse potential to improve reactive MLIPs by augmenting the training data set with inexpensive Morse data along the dissociation pathways. Further, this physics-constrained data augmentation (PCDA) approach results in MLIPs with smooth bond dissociation curves as well as near coupled-cluster level BDEs, all without requiring any expensive multireference quantum mechanical calculations. A case study for methane combustion demonstrates how the PCDA approach can improve an existing reactive MLIP, namely, ANI-1xnr. In conclusion, not only are the BDEs and bond dissociation curves for all radicals and molecules significantly improved compared to ANI-1xnr but the PCDA-trained MLIP retains the reliability of ANI-1xnr when performing reactive molecular dynamics simulations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Recent Advances toward Efficient Calculation of Higher Nuclear Derivatives in Quantum Chemistry

In this article, we provide an overview of state-of-the-art techniques that are being developed for efficient calculation of second and higher nuclear derivatives of quantum mechanical (QM) energy. Calculations of nuclear Hessians and anharmonic terms incur high costs and memory and scale poorly with system size. Three emerging classes of methods—machine learning (ML), automatic differentiation (AD), and matrix completion (MC)—have demonstrated promise in overcoming these challenges. We illustrate studies that employ unsupervised ML methods to reduce the need for multiple Hessian calculations in dynamics simulations and those that utilize supervised ML to construct approximate potential energy surfaces and estimate Hessians and anharmonic terms at reduced cost. By extension, if electronic structure operations could be written in a manner similar to functions underlying ML methods, rapid differentiation or AD routines can be employed to inexpensively calculate higher arbitrary-order derivatives. While ML approaches are typically black-box, we describe methods such as compressed sensing (CS) and MC, which explicitly leverage problem-specific mathematical properties of higher derivatives such as sparsity and low-rank, to complete higher derivative information using only a small, incomplete sample. The three classes of methods facilitate reliable predictions of observables ranging from infrared spectra to thermal conductivity and constitute a promising way forward in accurately capturing otherwise intractable higher-order responses of QM energy to nuclear perturbations.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Screening Ionic Liquids Based on Ionic Volume and Electrostatic Potential Analyses

Ionic liquids are known to have tunable solvation properties, based on the pairing of different anions and cations, but the compositional landscape is vast and challenging to navigate efficiently. Some computational screening protocols are available, but they can be either time-consuming or difficult to implement. Herein, we perform a detailed investigation of the fundamental role of electrostatic interactions in these systems. We effectively develop a bridge between the previous volume-based approach (VBA) with a quantum structure–property relationship (QSPR) approach to create fast, simple screening guidelines. We propose a new parameter that is applicable to both monovalent and multivalent ions, the ionic polarity index (IPI), which is defined as the ratio of the average electrostatic surface potential ($\bar{V}$) of the ion to the net charge of the ion (q). The IPI correlation has been tested on a diverse dataset of 121 ions and reliable predictions can be obtained within a homologous series of ionic liquid compounds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Energetic Stability of Freestanding and Metal-Supported Borophenes: Quantum Monte Carlo and Density-Functional Theory Calculations

Quantum Monte Carlo (QMC) and density-functional theory (DFT) calculations were carried out to study cohesion energetics of two-dimensional (2D) sheets of boron atoms called borophenes. Our QMC calculations confirmed the polymorphism among free-standing borophenes that was reported in previous DFT studies. Although Perdew-Burke-Ernzerhof (PBE) calculations significantly overestimate the cohesive energies of 2D boron sheets, DFT-PBE relative energetics with respect to each other among various free-standing borophenes are found to be in quantitative agreement with the corresponding QMC results. This suggests that one can make reliable predictions for relative stability of different boron sheets through DFT-PBE calculations. Our analysis of PBE formation energies of borophenes on metal surfaces shows that the polymorphic range is extended for borophenes on the Ag(111) and the Au(111) surfaces beyond that of free-standing borophenes, reflecting recent experimental synthesis of beta(12) and chi(3) boron sheets on the Ag(111) surface. We have also found that a hexagonal borophene can be stabilized through charge transfer from a metal surface and is energetically favored on the AI(111) surface over other borophene structures. Finally, it is found that the bilayer formation could be energetically favored over its monolayer form for the borophene-Au system, especially for borophenes with hexagonal hole densities eta lower than 1/9. This leads to our prediction that in addition to its monolayer form, a bilayer eta = 1/12 borophene can be synthesized on the Au(111) surface, opening a new possibility for borophene-based electronic devices.

ab initio↗

Dye Nanoaggregate Structures in MK-2, N3, and N749 Dye···TiO 2 Interfaces That Represent Dye-Sensitized Solar Cell Working Electrodes

The working electrode of a dye-sensitized solar cell (DSSC) consists of dye molecules adsorbed onto nanoparticles of a semiconductor such as TiO 2 . A reliable prediction of the DSSC photovoltaic performance of a given dye requires in-depth knowledge about the precise structure of the dye···TiO 2 interface. In this work, X-ray reflectometry (XRR) and grazing-incidence small-angle X-ray scattering (GISAXS) are employed to determine the dye···TiO 2 interfacial structure and associated dye aggregation behavior of three high-performance DSSC dyes, i.e., a metal-free organic dye, MK-2, and the two archetypal ruthenium-based organometallic dyes, N3 and N749 (Black Dye). Results show that all three dyes form nanoaggregates in dye···TiO 2 interfaces. We determine the dye nanoaggregate separations, sizes, distribution densities, and the extent of short-range order within each dye self-assembly in the longitudinal and lateral directions. Dye···TiO 2 composites fabricated using dye solutions of varying concentrations are analyzed. We find that nanoaggregates of the three dyes are separated by several hundred nanometers (158-203 nm) in dye···TiO 2 interfaces that have been fabricated using concentrated dye solutions (0.5 mM or 1.0 mM). MK-2 and N749 dyes also display smaller interparticle separations. Dye nanoparticle diameters are of the order of 156-198 nm, sizes that are comparable to the largest interparticle separations. Thus, no extraneous dye particles can be fitted into gaps between particles, so the dye self-assembly is saturated. Self-assemblies of all three dyes exhibit both lateral and longitudinal short-range order; N3 displays a particularly short coherence length along the TiO 2 surface, with extensive structured disorder along the longitudinal direction. The operation of DSSC working electrodes would therefore seem to be dependent on a dye self-assembly that may exhibit several levels of structural granularity and dye aggregation effects.

14 SOLAR ENERGY↗

Laser-Induced Carbon-Based Smart Flexible Sensor Array for Multiflavors Detection

We report a flexible sensor array electronic tongue system that is fabricated on a polymer substrate by the laser direct writing process for multiflavor detection. Electronic tongue is a sensing system that is applied to detect different elements with the same sensor array. By analyzing responses from different measurement units, it enables a cross-sensitivity, namely, the ability of the system to responding to a range of different analytes in solution without specific functionalization of sensors. In this article, a six-unit sensing array system was fabricated by a laser direct writing process. Sensing units were introduced on a flexible polyamide surface. A high surface–volume ratio porous carbon structure was created by a laser-induced carbonization process, which provides stable conductive carbon electrodes with high sensitivity. Different surface treatments, such as gold plating, reduced-graphene oxide coating, and polyaniline coating, were accomplished for different measurement units. By applying principal component analysis, this sensing system shows a promising result for the detection of multiple flavors. The detection limit for each element is about 0.1 mM for NaCl and sugar solutions. Also, it is able to detect 10 –4 times diluted commercial table vinegar solution, which originally contains 5% acetic acid. The detection limit is theoretically lower than the human threshold of 10 mM for NaCl and sugar. Besides, the sensing system shows a high sensitivity and selectivity for mixed elements. Here, by mapping the data points, the sensor system could detect flavor combinations and provide a reliable prediction of analyte concentration ratios.

47 OTHER INSTRUMENTATION↗

Ripening of Rh Nanoparticle Catalysts in Reverse Water–Gas Shift via a Data-Driven Model Combining Physics, Theory, and Experiment

Degradation via sintering is an ongoing challenge that impedes the broad commercial success of supported metallic nanoparticle catalysts. To mitigate degradation via informed catalyst design and process operations, here we aim to disambiguate the underlying mechanisms of sintering by combining theory and experiment in a quantitative framework. While mechanistic sintering models exist, they only model a single sintering pathway, even though multiple sintering mechanisms can occur simultaneously or dominate at different stages of the process. Data-driven machine learning models have emerged as a means to represent complex processes through data regression. However, machine learning models have very large data needs and lack mechanistic insights due to their black-box encoding. To develop an interpretive model of catalyst degradation via sintering, we constructed a hybrid model combining mechanistic “physics-based” models and data-driven methods to obtain both reliable predictions and mechanistic insights regarding experimentally observed sintering phenomena. Focusing on nanoparticle sintering in the Rh–TiO 2 catalyst for the reverse water–gas shift (RWGS) reaction, the hybrid model couples a mechanistic term for Ostwald ripening with energy values calculated via density functional theory (DFT) with a parametric, data-driven discrepancy function term for unmodeled mechanisms. The hybrid model is trained using Bayesian inference with data collected from small-angle X-ray scattering (SAXS) in situ experiments wherein average nanoparticle diameter versus time was measured at three relevant operating temperatures. The calibrated hybrid model results show that an Ostwald ripening-only model parameterized with fixed DFT energies does not fully capture the time and temperature dependence of the SAXS-observed sintering kinetics, and that an additional functional contribution, or DFT energy calibration, is required to reconcile simulation and experiment. Analysis of the hybrid-model error confirms that the hybrid model outperforms both the purely mechanistic and purely data-driven alternatives in terms of expected predictive accuracy for time-evolving average particle sizes. Furthermore, the results support the hypothesis that the Ostwald ripening mechanism is less important for explaining the sintering phenomena as operating temperature increases under an assumed fixed DFT parameterization. This could be explained in one of two ways: either latent, unmodeled sintering mechanisms dominate at higher temperatures, or the DFT uncertainty increases with temperature. The proposed modeling approach directly links theory to experiments and simulations via a statistical hybrid modeling framework and can be extended to other catalytic systems to improve predictive models and mechanistic understanding.

Bayesian hybrid modeling↗

Two-Component Relativistic Calculations of Electric-Field Gradients Using Exact Decoupling Methods: Spin–orbit and Picture-Change Effects

Electric field gradients (EFGs) for heavy nuclei in diatomic molecules (hydrogen halides and group-13 iodides), uranyl (UO 2 2+ ), and a uranyl carbonate complex, were computed with different formally exactly (or nearly exactly) decoupled two-component relativistic Hamiltonians: the “exact two-component” (X2C) method, the Barysz–Sadlej–Snijders (BSS) approach, and up to 35th order in the Douglas–Kroll–Hess (DKH) expansion, utilizing a new implementation in the open-source NWChem quantum chemistry package. Results from two-component Hartree–Fock and density functional theory (DFT) calculations at the scalar relativistic approximation as well as including spin–orbit coupling are reported. Picture-change corrected EFGs obtained with X2C, BSS, and high-order DKH are shown to be numerically equivalent. Effects from spin–orbit coupling on the EFGs tend to be moderate but should not be excluded for reliable predictions. Picture-change effects on the EFG of a heavy atom can be as large as the correct picture-change corrected value, as is shown for the uranium EFG in the uranyl systems. The results demonstrate the necessity of simultaneously including spin–orbit and picture-change effects in calculations of heavy atom EFGs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Theoretical Studies on the Photoelectron and Absorption Spectra of MnO 4 – and TcO 4 –

The tetraoxo pertechnetate anion (TcO4-) is of great interest for nuclear waste management and radiopharmceuticals. To elucidate its electronic structure and to compare with that of its lighter congener MnO4-, the photoelectron and electronic absorption spectra of MnO4 - and TcO4 - are investigated with density functional theory (DFT) and ab initio wave function theory (WFT). The vertical electron detachment energies (VDEs) of MnO4 - obtained with the CR-EOM-CCSD(T) method are in good agreement with the lowest two experimental VDEs; the differences are less than 0.1 eV, representing a significant improvement over the IP-EOMCCSD(T) result in the literature. Combining our CCSD(T) and CR-EOMCCSD( T) results, the first five VDEs of TcO4 - are estimated between 5 and 10 eV with an estimated accuracy of about ±0.2 eV. The vertical excitation energies are determined by using TD-DFT, CR-EOM-CCSD(T), and RASPT2 methods. The excitation energies and the assignments of the spectra are analyzed and partly improved. They are compared with reported SAC-CI results and available experimental data. Both dynamic and nondynamic electron correlations are important in the ground and excited states of MnO4 - and TcO4 -. Nondynamical correlations are particularly relevant in TcO4 - for reliable prediction of excitation energies. In TcO4 - one Rydberg state interlaces but does not mix with the valence excited states, and it disappears in the condensed phase.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Multilevel Computational Studies Reveal the Importance of Axial Ligand for Oxygen Reduction Reaction on Fe–N–C Materials

The systematic improvement of Fe–N–C materials for fuel cell applications has proven challenging, due in part to an incomplete atomistic understanding of the oxygen reduction reaction (ORR) under electrochemical conditions. Herein, a multilevel computational approach, which combines ab initio molecular dynamics simulations and constant potential density functional theory calculations, is used to assess proton-coupled electron transfer (PCET) processes and adsorption thermodynamics of key ORR intermediates. These calculations indicate that the potential-limiting step for ORR on Fe–N–C materials is the formation of the Fe III –OOH intermediate. They also show that an active site model with a water molecule axially ligated to the iron center throughout the catalytic cycle produces results that are consistent with the experimental measurements. In particular, reliable prediction of the ORR onset potential and the Fe(III/II) redox potential associated with the conversion of Fe III –OH to Fe II and desorbed H 2 O requires an axial H 2 O co-adsorbed to the iron center. The observation of a five-coordinate rather than four-coordinate active site has significant implications for the thermodynamics and mechanism of ORR. Importantly, these findings highlight the importance of solvent–substrate interactions and surface charge effects for understanding the PCET reaction mechanisms and transition-metal redox couples under realistic electrochemical conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Vibrationally-resolved Photoelectron Spectroscopy of the Model GFP Chromophore Anion Revealing the Photoexcited S-1 State being both Vertically and Adiabatically Bound against the Photodetached D-0 Continuum

The first excited state of the model green fluorescence protein (GFP) chromophore anion (S1) and its energy level against the electron-detached neutral radical, D0 state are crucial in determining the photophysics and the photo-induced dynamics of GFP. Extensive experimental and theoretical studies, particularly several very recent gas phase investigations concluded that S1 is a bound state in the Franck-Condon vertical region with respect to D0. However, what remains unknown and challenging is if S1 is bound adiabatically, primarily due to lack of accurate experimental measurements, as well as due to close proximity in energy for these two states that even sophisticated high-level ab initio calculations can’t reliably predict. Here, we report a negative ion photoelectron spectroscopy study on the model GFP chromophore anion, the deprotonated p-hydroxybenzylidene-2,3-dimethylimidazolinone anion (HBDI–). Despite the considerable size and low symmetry of the molecule, well resolved vibrational structures were obtained with the 0–0 transition being the most intense peak. The adiabatic (ADE) and vertical detachment energy (VDE) therefore are determined, both to be 2.73 ± 0.01 eV, indicating the detached D0 state is 0.16 eV higher in energy than the photon excited S1 state. The accurate ADE and VDE values and the well-resolved photoelectron spectra reported here provide much needed, robust benchmarks for future theoretical investigations.

Environmental Molecular Sciences Laboratory↗

CO 2 Wettability of Sandstones: Addressing Conflicting Capillary Behaviors

Understanding the capillary and wetting behavior of supercritical CO 2 (scCO 2 ) and brine in reservoir rocks is essential for reliable predictions of geologic carbon storage, as it strongly impacts CO 2 migration and residual trapping in the reservoir. The wetting state of such systems can be assessed through laboratory measurements of the capillary pressure characteristic curve. Yet, while some studies reported consistent scaling with strongly water wet systems, some others observed deviations from hydrophilic conditions. We present core-flooding drainage capillary pressure measurements using scCO 2 /water and N 2 /water on a Berea sandstone, untreated, then fired, and then exposed to scCO 2 for 28 days. The aim is to explore the impact of firing and longer exposure to scCO 2 , two potential sources for variability in experimental observations, on capillarity and wettability. The results show excellent agreement among all the core-flooding capillary pressure data, suggesting no change in wetting state due to firing or longer exposure.

58 GEOSCIENCES↗

Proteogenomic characterization of human colon and rectal cancer

We analyzed proteomes of colon and rectal tumors previously characterized by the Cancer Genome Atlas (TCGA) and performed integrated proteogenomic analyses. Protein sequence variants encoded by somatic genomic variations displayed reduced expression compared to protein variants encoded by germline variations. mRNA transcript abundance did not reliably predict protein expression differences between tumors. Proteomics identified five protein expression subtypes, two of which were associated with the TCGA "MSI/CIMP" transcriptional subtype, but had distinct mutation and methylation patterns and associated with different clinical outcomes. Although CNAs showed strong cis- and trans-effects on mRNA expression, relatively few of these extend to the protein level. Thus, proteomics data enabled prioritization of candidate driver genes. Our analyses identified HNF4A, a novel candidate driver gene in tumors with chromosome 20q amplifications. Integrated proteogenomic analysis provides functional context to interpret genomic abnormalities and affords novel insights into cancer biology.

: colorectal cancer, shotgun proteomics, proteogen↗