Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “redox stability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Fluorination-Enhanced Surface Stability of Cation-Disordered Rocksalt Cathodes for Li-Ion Batteries

Cation-disordered rocksalt (DRX) materials have emerged as a class of novel high-capacity cathodes for Li-ion batteries. However, commercialization of DRX cathodes will require reducing their capacity decay, which has been associated with oxygen loss during cycling. Recent studies have shown that fluorination of DRX cathodes can effectively reduce the oxygen loss and improve the cycling stability; however, the underlying atomic-scale mechanisms remain elusive. Herein, using a combination of electrochemical measurements, scanning transmission electron microscopy, and electron energy loss spectroscopy, we examine the correlation between the electrochemical properties and structural evolution in Mn-redox-based DRX cathodes, Li1.2Ti0.4-xMn0.4+xO2.0-xFx (x = 0 and 0.2). We find that fluorination strongly suppresses structural amorphization and void formation initiated from the particle surface, therefore greatly enhancing the cyclability of the cathode. We further reveal a novel rocksalt-to-spinel-like structural transformation in the DRX bulk, which surprisingly contributes to a gradual capacity increase during cycling. Our results provide important insight for the design of novel DRX cathodes with high capacity and long cycle life.

Li, Linze↗
DOE OSTI2020

Extended Interfacial Stability through Simple Acid Rinsing in a Li-Rich Oxide Cathode Material

Layered Li-rich Ni, Mn, Co (NMC) oxide cathodes in Li-ion batteries provide high specific capacities (>250 mAh/g) via O-redox at high voltages. However, associated high-voltage interfacial degradation processes require strategies for effective electrode surface passivation. Here, we show that an acidic surface treatment of a Li-rich NMC layered oxide cathode material leads to a substantial suppression of CO 2 and O 2 evolution, ~90% and ~100% respectively, during the first charge up to 4.8 V vs. Li +/0 . CO 2 suppression is related to Li 2 CO 3 removal as well as effective surface passivation against electrolyte degradation. This treatment does not result in any loss of discharge capacity and provides superior long-term cycling and rate performance compared to as-received, untreated materials. We also quantify the extent of lattice oxygen participation in charge compensation (“O-redox”) during Li + removal by a novel ex-situ acid titration. Our results indicate that the peroxo-like species resulting from O-redox originate on the surface at least 300 mV earlier than the activation plateau region around 4.5 V. X-ray photoelectron spectra and Mn -L X-ray absorption spectra of the cathode powders reveal a Li + deficiency and a partial reduction of Mn ions on the surface of the acid-treated material. More interestingly, although the irreversible oxygen evolution is greatly suppressed through the surface treatment, our O K-edge resonant inelastic X-ray scattering shows the lattice O-redox behavior largely sustained. The acidic treatment, therefore, only optimizes the surface of the Li-rich material and almost eliminates the irreversible gas evolution, leading to improved cycling and rate performance. This work therefore presents a simple yet effective approach to passivate cathode surfaces against interfacial instabilities during high-voltage battery operation.

25 ENERGY STORAGE↗
DOE OSTI2023

Shape-persistent phthalocyanine cages

Phthalocyanine (Pc), an electro-redox active moiety, has many attractive properties stemming from its large aromatic system and ability to act as a catalyst in electrochemical reactions, such as the CO 2 reduction reaction (CO 2 RR). However, due to the synthetic challenge related to geometric requirements and poor solubility (strong aggregation), discrete shape-persistent cages consisting of site-isolated, readily accessible Pc moieties have not been available. Here, we report the synthesis of Zn- and Ni-metallated Pc-based molecular cages via one-step dynamic spiroborate linkage formation in high yields. The ZnPc cage structure is unambiguously elucidated at the atomic level by single-crystal X-ray diffraction. Moreover, owing to the site-isolated redox-active metal centers, readily accessible intrinsic cavity, and shape-persistent backbone, the Ni-metallated Pc (NiPc) cage exhibits high catalytic efficiency, selectivity, and stability, superior to the non-caged control molecules in electrocatalytic CO 2 RR.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Synthesis and exceptional operational durability of polyaniline-inspired conductive ladder polymers

Ladder-type structures can impart exceptional stability to polymeric electronic materials. This article introduces a new class of conductive polymers featuring a fully ladder-type backbone. A judicious molecular design strategy enables the synthesis of a low-defect ladder polymer, which can be efficiently oxidized and acid-doped to achieve its conductive state. The structural elucidation of this polymer and the characterization of its open-shell nature are facilitated with the assistance of studies on small molecular models. An autonomous robotic system is used to optimize the conductivity of the polymer thin film, achieving over 7 mS cm −1 . Impressively, this polymer demonstrates unparalleled stability in strong acid and under harsh UV-irradiation, significantly surpassing commercial benchmarks like PEDOT:PSS and polyaniline. Moreover, it displays superior durability across numerous redox cycles as the active material in an electrochromic device and as the pseudocapacitive material in a supercapacitor device. This work provides structural design guidance for durable conductive polymers for long-term device operation.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Direct electrode-to-electrode regeneration of end-of-life batteries via electrode–electrolyte interphase dissolution

Lithium-ion battery recycling remains constrained by processes that recover metals at the expense of electrode integrity, while even direct recycling typically requires shredding to black mass followed by binder removal, separation, and full electrode refabrication. Here, we introduce direct electrode-to-electrode regeneration (DEER), a simultaneous electrochemical regeneration of used NMC and graphite electrodes from end-of-life batteries in their intact form by dissolving the passivating electrode–electrolyte interphase (EEI). DEER employs 1,3-dimethyl-2-imidazolidinone (DMI), a high donor number solvent that creates a thermodynamic environment favorable for solubilizing redox inactive EEI components. DEER dissolves the thick EEI on both used electrodes while preserving electrode integrity, enabling up to 95% capacity regain and improved cycling stability with a residual LiF-rich interphase. Operando Raman, operando IR, and post-mortem NMR directly track the electrochemically driven dissolution of carbonate-derived EEI species in the used DMI-based recycling electrolyte. Technoeconomic and life-cycle analyses show that DEER reduces the cost of recycled cell manufacturing by 56% relative to pyro- and hydrometallurgy, while lowering energy use and greenhouse gas emissions. Overall, DEER establishes the first validated pathway to directly regenerate and reuse electrodes harvested from truly end-of-life batteries, converting the key interfacial bottleneck into a controllable dissolution process and opening a practical route toward electrode level circularity.

Kim, Kiwon [Cornell Univ., Ithaca, NY (United Stat↗
DOE OSTI2021

Solution-phase p-type doping of highly enriched semiconducting single-walled carbon nanotubes for thermoelectric thin films

Single-walled carbon nanotubes (SWCNTs) are attractive materials for next-generation energy-harvesting technologies, including thermoelectric generators, due to their tunable opto-electronic properties and high charge carrier mobilities. Controlling the Fermi level within these unique 1D nanomaterials is often afforded by charge transfer interactions between SWCNTs and electron or hole accepting species. Conventional methods to dope SWCNT networks typically involve the diffusion of molecular redox dopant species into solid-state thin films, but solution-phase doping could potentially provide routes and/or benefits for charge carrier transport, scalability, and stability. Here, we develop a methodology for solution-phase doping of polymer-wrapped, highly enriched semiconducting SWCNTs using a p-type charge transfer dopant, F4TCNQ. This allows doped SWCNT inks to be cast into thin films without the need for additional post-deposition doping treatments. We demonstrate that the introduction of the dopant at varying stages of the SWCNT dispersion process impacts the ultimate thermoelectric performance and observe that the dopant alters the polymer selectivity for semiconducting vs metallic SWCNTs. In contrast to dense semiconducting polymer films, where solution-phase doping typically leads to disrupted morphologies and poorer TE performance than solid-state doping, thin films of solution-doped s-SWCNTs perform similarly to their solid-state doped counterparts. Interestingly, our results also suggest that solution-phase F4TCNQ doping leads to fully ionized and dimerized F4TCNQ anions in solid-state films that are not observed in films doped with F4TCNQ after deposition. Our results provide a framework for the application of solution-phase doping to a broad array of high-performance SWCNT-based thermoelectric materials and devices that may require high-throughput deposition techniques.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

A Dual–Phase Electrolyte for High–Energy Lithium–Sulfur Batteries

Dissolution of lithium polysulfides (LiPSs) is essential for fast cathode kinetics, but detrimental for anode stability, especially under lean electrolyte conditions. Here in this work, the phase separation phenomenon between solvents with different polarities (tetramethyl sulfone [TMS] and dibutyl ether [DBE]) is utilized to enable the design of a dual-phase electrolyte. High-polarity, high-density TMS–lithium bis(trifluoromethanesulfonyl)imide–ammonium trifluoroacetate as the cathode electrolyte strongly solvates LiPSs, which propel the sulfur redox reaction. Moreover, the composite of DBE and a polymeric ion conductor serves as the anode electrolyte. The addition of DBE in the anode side effectively prevents the crossover of corrosive species (LiPSs and ammonia trifluoroacetate), enabling a significant improvement in Li-metal anode stability. The electrode-specific dual-phase electrolyte design provides electrochemical performance superior to conventional electrolytes. Without additional electrode engineering, pouch cells assemble with the dual-phase electrolyte cycle under a lean electrolyte (4 µL mg –1 ) and low-Li-excess condition (N/P = 3) for 120 cycles.

25 ENERGY STORAGE↗
DOE OSTI2022

Ce x Zr 1– x O 2 -Supported CrO x Catalysts for CO 2 -Assisted Oxidative Dehydrogenation of Propane–Probing the Active Sites and Strategies for Enhanced Stability

CO 2 -assisted oxidative dehydrogenation of propane (CO 2 -ODH) represents an attractive approach for propylene production and CO 2 utilization. As a soft oxidant, CO 2 can minimize overoxidation of the hydrocarbons to enhance the propylene selectivity while increasing the equilibrium yield. However, a major challenge of CO 2 -ODH is the rapid deactivation of the catalysts. The current study focuses on designing Ce x Zr 1–x O 2 -mixed oxide-supported CrO x catalysts for CO 2 -ODH with enhanced product selectivity and catalyst stability. By doping 0–30% Ce in the Ce x Zr 1–x O 2 mixed oxide support, propane conversion of 53–79% was achieved at 600 °C, with propylene selectivity up to 82%. Compared to the pure ZrO 2 -supported catalyst (i.e., 5 wt %Cr/ZrO 2 ), 20–30 %Ce doped catalysts (i.e., 5 wt %Cr/Ce 0.2 Zr 0.8 O 2 and 5 wt %Cr/Ce 0.3 Zr 0.7 O 2 ) inhibited the formation of CH 4 and ethylene and improved propylene selectivity from 57 to 77–82%. Detailed characterizations of the 5%Cr/Ce 0.2 Zr 0.8 O 2 catalyst and density functional theory (DFT) calculations indicated that Cr 3+ is the active species during the CO 2 -ODH reaction, and the reaction follows a non-redox dehydrogenation pathway. Coke formation was determined to be the primary reason for catalyst deactivation, and the addition of Ce to the ZrO 2 support greatly enhanced the coke resistance, leading to superior stability. Furthermore, coke removal by oxidizing the catalyst in air is effective in restoring its activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Selective Electrochemical End‐Group Removal Enhances Polymer Thermal Stability

Here we introduce an electrochemical strategy for the selective and quantitative removal of thiocarbonylthio end groups from polymers prepared by reversible addition–fragmentation chain transfer (RAFT) or photoiniferter polymerization. Our results indicate that applying a cathodic potential in an undivided cell promotes reductive cleavage of the thiocarbonylthio moiety, generating terminal polymer radicals that are efficiently capped with hydrogen atoms in the presence of benign donors. This transformation proceeds cleanly across diverse polymer backbones and end-group chemistries, including trithiocarbonates and dithiobenzoates, without chain coupling or degradation. Moreover, the applied potential can be tuned to enable chemoselective end-group removal in mixed-polymer systems, a level of control inaccessible by thermal, photochemical, or nucleophilic strategies. Beyond delivering colorless and optically transparent materials, electrochemical end-group removal significantly enhances polymer stability. Poly(methyl methacrylate) subjected to electrochemical end-group removal exhibited a T 95 of 342 °C, exceeding the stabilities of analogous polymers with end groups removed by aminolysis (T 95 = 260 °C) or radical-based methods (T 95 = 299 °C). These findings demonstrate redox-directed post-polymerization modification as a tool for designing robust, transparent, and thermally stable macromolecules and establish electrochemistry as a platform strategy in polymer synthesis and processing.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Influence of ethylenediaminetetraacetic acid on the long-term oxidation state distribution of plutonium

Here, spectrophotometry was used to study the effect of EDTA on plutonium oxidation state distribution as a function of time, pH, and ligand-to-metal ratio (L/M) under anoxic conditions. Novel Pu(V)-EDTA absorption bands were identified at 571, 993, 1105, and 1150 nm with molar absorption coefficients of 15 ± 1, 6 ± 1, 10 ± 1, and 10 ± 1 cm –1 M –1 , respectively. Pu(V)-EDTA spectral changes occurred at L/M < 1, indicating only Pu V O 2 (EDTA) 3- formed with logK = 3.6 ± 0.3. Time-resolved experiments showed EDTA drastically increased the Pu(V/VI) reduction rate, which we propose is driven by amine lone-pair electron donation and the oxidative decarboxylation of EDTA. Oxidation of Pu(III)-EDTA to Pu(IV)-EDTA occurred on a slower time scale (110–237 days) than previously reported (<15 min) and is hypothesized to be radiolysis driven. Pu(V/VI)-EDTA and Pu(III)-EDTA both approached Pu(IV)-EDTA stabilization over time, yet Pu(V/VI)-EDTA solubility data was ≥ 1.0 log 10 units higher than predicted by Pu(IV)-EDTA solubility models, indicating that current thermodynamic models are incomplete. Ultimately, the data show EDTA preferentially stabilizes Pu(IV) over time regardless of initial oxidation state, but Pu(V)-EDTA can persist under environmentally-relevant conditions, emphasizing the need to continue investigating redox reactions, speciation, and behavior of these complexes to support the transuranic waste disposal and surface remediation/containment efforts.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2025

Nb 2 O 5 Protection Layers for Hydrogen Evolution by p-InP Photocathodes in Acidic Electrolytes

Coatings of HfO 2 , Ta 2 O 5 , TiO 2 , and Nb 2 O 5 were evaluated as protection layers for p-InP photocathodes in aqueous acidic electrolytes. Each candidate protection layer was characterized based on interfacial conduction of photogenerated electrons, the thermodynamic and kinetic stability of the overlayer over the relevant potential and pH range for cathodic fuel-forming half-reactions, and inhibition of the primary anodic and/or chemical dissolution processes that limit electrode stability. The conduction of photogenerated electrons and inhibition of anodic oxidation was evaluated using V 3+ / 2+ in 5.0 M HCl(aq) as a one-electron redox couple with a potential close to that of hydrogen evolution in acidic media. Failure modes due to cathodic plating of metal, as well as anodic dissolution and chemical dissolution processes, were evaluated for photocathodes made from etched p-InP, platinized p-InP, and p-InP photoelectrodes that had been coated with the various oxide films and then platinized for use in photoelectrochemical hydrogen evolution in acidic aqueous electrolytes. Nb 2 O 5 best met all of the criteria, contrasting with TiO 2 , which is thermodynamically and kinetically unstable in acid over the potential range relevant for the hydrogen evolution and/or CO 2 reduction electrochemical half-reactions. Furthermore, these protocols should be useful for other materials and semiconductors to determine the effectiveness of protection layers for photocathodes.

Electrodes↗
DOE OSTI2026

Unraveling Defect-Dependent Conductivity-Type Switching in CuFe 2 O 4 for Enhanced Photoelectrocatalytic Reduction of Benzaldehyde

Photoelectrocatalytic (PEC) reduction provides a sustainable route for upgrading biomass-derived feedstocks with reduced energy requirements, yet remains largely unexplored beyond hydrogen evolution and CO 2 reduction due to the scarcity of stable photocathodes. Here, we report a defect-engineered CuFe 2 O 4 photocathode that enables directly quantified PEC reduction of benzaldehyde to benzyl alcohol using a singlecomponent, earth-abundant oxide. By controlling annealing temperature and oxygen partial pressure, CuFe 2 O 4 is systematically tuned from n-type to p-type conductivity. Electrochemical measurements, X-ray and ultraviolet photoelectron spectroscopy, and firstprinciples defect calculations collectively show that oxygen-rich annealing conditions suppress deep donor-type oxygen vacancies while stabilizing shallow acceptor-type copper vacancies, resulting in enhanced hole concentration and improved charge transport. In a mixed acetonitrile/water electrolyte employing 1,4-benzoquinone as a redox mediator, the optimized CuFe 2 O 4 photocathode achieves stable photoelectrochemical operation over 18 h under continuous illumination with a benzyl alcohol production rate of 2.57 μmol/h at −0.50 V vs Ag/AgNO 3 , corresponding to a Faradaic efficiency of 51.3%. This PEC approach lowers the required applied potential by ∼1 V compared to traditional electrocatalytic methods, offering a more energy-efficient route for carbonyl reduction. These findings establish CuFe 2 O 4 as a viable photocathode platform for sustainable photoelectrocatalytic organic transformations under mild reaction conditions.

benzaldehyde reduction↗
DOE OSTI2023

Role of aggregates and microstructure of mixed-ionic–electronic-conductors on charge transport in electrochemical transistors

Synthetic efforts have delivered a library of organic mixed ionic–electronic conductors (OMIECs) with high performance in electrochemical transistors. The most promising materials are redox-active conjugated polymers with hydrophilic side chains that reach high transconductances in aqueous electrolytes due to volumetric electrochemical charging. Current approaches to improve transconductance and device stability focus mostly on materials chemistry including backbone and side chain design. However, other parameters such as the initial microstructure and microstructural rearrangements during electrochemical charging are equally important and are influenced by backbone and side chain chemistry. In this study, we employ a polymer system to investigate the fundamental electrochemical charging mechanisms of OMIECs. We couple in situ electronic charge transport measurements and spectroelectrochemistry with ex situ X-ray scattering electrochemical charging experiments and find that polymer chains planarize during electrochemical charging. Our work shows that the most effective conductivity modulation is related to electrochemical accessibility of well-ordered, interconnected aggregates that host high mobility electronic charge carriers. Electrochemical stress cycling induces microstructural changes, but we find that these aggregates can largely maintain order, providing insights on the structural stability and reversibility of electrochemical charging in these systems. Finally, this work shows the importance of material design for creating OMIECs that undergo structural rearrangements to accommodate ions and electronic charge carriers during which percolating networks are formed for efficient electronic charge transport.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Growth and Stability of Stratiform Carrollite (CuCo2S4) in the Tenke-Fungurume Ore District, Central African Copperbelt

Abstract Carrollite (CuCo2S4) is the main ore mineral of the critical battery metal cobalt, yet, surprisingly, detailed characterization of its thermodynamic properties and of its trace element contents remain sparse in the scientific literature. To fill these knowledge gaps, we generated the first thermodynamic data set for carrollite using well-characterized samples obtained from the stratiform sulfide mineralization style at Fungurume 88 deposit in the Democratic Republic of Congo. Detailed mineralogical investigation of these same samples suggests that carrollite has limited ability to incorporate other ‘sweetener’ elements (except Cu and Ni) by substitution mechanisms. Modeling using CHNOSZ 2.0.0. software and an integrated Cu-Co-S-O thermodynamic data set provides insights into the stability of carrollite relative to other Co-bearing minerals under physicochemical conditions relevant to the Central African Copperbelt. Further exploration of these models indicates that dropping redox potential in the mineralizing system is insufficient to explain the mineral-scale and deposit-scale zonation patterns commonly observed in Cu-Co deposits of the Central African Copperbelt. Instead, factors such as increasing pH, decreasing T, decreasing sulfur activity, or some combination of changing physicochemical parameters may need to be invoked to explain these zonation trends. At the Fungurume 88 deposit, the absence of linnaeite (Co3S4) suggests that ore precipitation occurred at temperatures cooler than 211 °C. From our pH-logfO2 diagrams, and relative to higher temperatures, such a lower T regime is marked by a greater degree of offset between the modeled Cu and Co solubility contours, thus facilitating a more differentiated and zoned distribution of these two metals at the deposit scale. Our models are offered to the geoscience community as exceptionally useful tools for modeling and visualizing the Cu-Co-S-O systematics and may be applied to a variety of geological and geometallurgical questions in the Central African Copperbelt and other deposits elsewhere.

Mineralogy↗
DOE OSTI2022

Mechanistic Interpretations and Insights for the Oxidative Dehydrogenation of Propane via CO 2 over Cr 2 O 3 /Al 2 O 3 Catalysts

Oxidative dehydrogenation (ODH) of alkanes using carbon dioxide as a soft oxidant has recently emerged as a potentially attractive alternative to steam cracking for the production of light olefins. To elucidate reaction pathways and their dependence on the operating conditions, CO 2 -assisted propane dehydrogenation over a redox-active Cr 2 O 3 /Al 2 O 3 catalyst was examined in a packed bed reactor as a function of temperature, Cr 2 O 3 /CO 2 feed ratio, and residence time. Previous ODH studies have largely focused on CO 2 -rich conditions with the aim of preventing coke formation. However, at T = 600 °C the present study finds that the use of propane-rich conditions (1 ≤ C 3 H 8 /CO 2 ≤ 2.5) maximizes propylene production and selectivity while maintaining catalyst stability. In this work, it is postulated that the selective Mars van Krevelen dehydrogenation process is optimized at these ratios. Excess CO 2 apparently promotes nonselective dehydrogenation and dry reforming pathways that generate additional CO, adversely impacting catalyst stability via the Bouduard reaction. This hypothesis is supported by complementary investigations of the reverse water gas shift reaction and thermodynamic analysis. The findings and methodology presented here are likely applicable to related ODH processes with other alkanes and redox-active catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Cycling of block copolymer composites with lithium-conducting ceramic nanoparticles

Solid polymer and perovskite-type ceramic electrolytes have both shown promise in advancing solid-state lithium metal batteries. Despite their favorable interfacial stability against lithium metal, polymer electrolytes face issues due to their low ionic conductivity and poor mechanical strength. Highly conductive and mechanically robust ceramics, on the other hand, cannot physically remain in contact with redox-active particles that expand and contract during charge-discharge cycles unless excessive pressures are used. To overcome the disadvantages of each material, polymer-ceramic composites can be formed; however, depletion interactions will always lead to aggregation of the ceramic particles if a homopolymer above its melting temperature is used. In this study, we incorporate Li 0.33 La 0.56 TiO 3 (LLTO) nanoparticles into a block copolymer, polystyrene- b -poly (ethylene oxide) (SEO), to develop a polymer-composite electrolyte (SEO-LLTO). TEMs of the same nanoparticles in polyethylene oxide (PEO) show highly aggregated particles whereas a significant fraction of the nanoparticles are dispersed within the PEO-rich lamellae of the SEO-LLTO electrolyte. We use synchrotron hard x-ray microtomography to study the cell failure and interfacial stability of SEO-LLTO in cycled lithium-lithium symmetric cells. Three-dimensional tomograms reveal the formation of large globular lithium structures in the vicinity of the LLTO aggregates. Encasing the SEO-LLTO between layers of SEO to form a “sandwich” electrolyte, we prevent direct contact of LLTO with lithium metal, which allows for the passage of seven-fold higher current densities without signatures of lithium deposition around LLTO. We posit that eliminating particle clustering and direct contact of LLTO and lithium metal through dry processing techniques is crucial to enabling composite electrolytes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Highly reversible Li 2 RuO 3 cathodes in sulfide-based all solid-state lithium batteries

The practical application of high-capacity lithium-rich cathode materials in lithium-ion batteries has been largely restricted by severe side reactions with electrolytes. Herein, we report a highly stable lithium-rich Li 2 RuO 3 cathode by forming a passivating solid electrolyte interphase at the interface with a sulfide solid electrolyte such as Li 6 PS 5 Cl in all-solid-state lithium batteries (ASSLBs), which efficiently suppresses serious parasitic interfacial reactions and fast-increasing interfacial impedance normally observed in liquid electrolytes. The exceptionally high interfacial stability of the Li 2 RuO 3 /sulfide electrolyte interface contributes to a high reversible capacity of 257 mA h g –1 of Li 2 RuO 3 at 0.05C rate, and unprecedented cycling stability with 90% capacity retention after 1000 cycles at 1C rate. Iin this work, comprehensive experimental characterizations and first-principles calculations disclose that electronically insulating interfacial reaction products forming at the interface between the Li 2 RuO 3 cathode and Li 6 PS 5 Cl facilitate the formation of a stable and passivating interphase and block the continuous side reactions. Importantly, reversible oxygen redox activity of Li 2 RuO 3 is well-maintained in this configuration of ASSLBs even after 600 cycles, thus the common voltage decay of the Li-rich material is also significantly reduced. These new discoveries demonstrate the critical role of interface design for achieving prolonged cycling stability of lithium-rich cathode materials.

25 ENERGY STORAGE↗
DOE OSTI2025

An epitaxial surface heterostructure anchoring approach for high-performance Ni-rich layered cathodes

Nickel-rich (Ni≥90%) layered oxides materials have emerged as a promising candidate for next-generation high-energy-density lithium-ion batteries (LIBs). However, their widespread application is hindered by structural fatigue and lattice oxygen loss. In this work, an epitaxial surface rock-salt nanolayer is successfully developed on the LiNi 0.9 Co 0.1 O 2 sub-surface via heteroatom anchoring utilizing high-valence element molybdenum modification. This in-situ formed conformal buffer phase with a thickness of 1.2nm effectively suppresses the continuous interphase side-reactions, and thus maintains the excellent structure integrity at high voltage. Furthermore, theoretical calculations indicate that the lattice oxygen reversibility in the anion framework of the optimized sample is obviously enhanced due to the higher content of O 2p states near the Fermi level than that of the pristine one. Meanwhile, the stronger Mo–O bond further reduces cell volume alteration, which improves the bulk structure stability of modified materials. Besides, the detailed charge compensation mechanism suggests that the average oxidation state of Ni is reduced, which induces more active Li + participating in the redox reactions, boosting the cell energy density. As a result, the uniquely designed cathode materials exhibit an extraordinary discharge capacity of 245.4 mAh g −1 at 0.1 C, remarkable rate performance of 169.3 mAh g −1 at 10 C at 4.5V, and a high capacity retention of 70.5% after 1000 cycles in full cells at a high cut-off voltage of 4.4V. Further, this strategy provides an valuable insight into constructing distinctive heterostructure on high-performance Ni-rich layered cathodes for LIBs.

25 ENERGY STORAGE↗