Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “quantum measurement”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

Primary photodissociation mechanisms of pyruvic acid on S 1 : observation of methylhydroxycarbene and its chemical reaction in the gas phase

Pyruvic acid, a representative alpha-keto carboxylic acid, is one of the few organic molecules destroyed in the troposphere by solar radiation rather than by reactions with free radicals. To date, only its stable final products were identified, often with contribution from secondary chemistry, making it difficult to elucidate photodissociation mechanisms following excitation to the lowest singlet excited-state (S 1 ) and the role of the internal hydrogen bond in the most-stable Tc conformer. Using multiplexed photoionization mass spectrometry we report the first direct experimental evidence, via the observation of singlet methylhydroxycarbene (MHC) following 351 nm excitation, supporting the decarboxylation mechanism previously proposed. Decarboxylation to MHC + CO 2 represents 97–100% of product branching at 351 nm. We observe vinyl alcohol and acetaldehyde, which we attribute to isomerization of MHC. We also observe a 3 ± 2% yield of the Norrish Type I photoproducts CH 3 CO + DOCO, but only from d 1 -pyruvic acid. At 4 Torr pressure, we measure a photodissociation quantum yield of $1.0^{+0}_{–0.4}$, consistent with IUPAC recommendations. However, our measured product branching fractions disagree with IUPAC. In light of previous calculations, these results support a mechanism in which hydrogen transfer on the S 1 excited state occurs at least partially by tunneling, in competition with intersystem crossing to the T 1 state. Here, we present the first evidence of a bimolecular reaction of MHC in the gas phase, where MHC reacts with pyruvic acid to produce a C 4 H 8 O 2 product. This observation implies that some MHC produced from pyruvic acid in Earth's troposphere will be stabilized and participate in chemical reactions with O 2 and H 2 O, and should be considered in atmospheric modeling.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Quantum advantage in learning from experiments

Quantum technology promises to revolutionize how we learn about the physical world. An experiment that processes quantum data with a quantum computer could have substantial advantages over conventional experiments in which quantum states are measured and outcomes are processed with a classical computer. We proved that quantum machines could learn from exponentially fewer experiments than the number required by conventional experiments. This exponential advantage is shown for predicting properties of physical systems, performing quantum principal component analysis, and learning about physical dynamics. Furthermore, the quantum resources needed for achieving an exponential advantage are quite modest in some cases. Conducting experiments with 40 superconducting qubits and 1300 quantum gates, we demonstrated that a substantial quantum advantage is possible with today’s quantum processors.

Science & Technology - Other Topics↗

Entanglement-based quantum digital signatures over a deployed campus network

The quantum digital signature protocol offers a replacement for most aspects of public-key digital signatures ubiquitous in today’s digital world. A major advantage of a quantum-digital-signatures protocol is that it can have information-theoretic security, whereas public-key cryptography cannot. Here we demonstrate and characterize hardware to implement entanglement-based quantum digital signatures over our campus network. Over 25 hours, we collect measurements on our campus network, where we measure sufficiently low quantum bit error rates (<5% in most cases) which in principle enable quantum digital signatures at over 50 km as shown through rigorous simulation accompanied by a noise model developed specifically for our implementation. These results show quantum digital signatures can be successfully employed over deployed fiber. Moreover, our reported method provides great flexibility in the number of users, but with reduced entanglement rate per user. Finally, while the current implementation of our entanglement-based approach has a low signature rate, feasible upgrades would significantly increase the signature rate.

97 MATHEMATICS AND COMPUTING↗

Quantum Sensing and its Potential for Nuclear Safeguards

Quantum sensing has the potential to provide ultrasensitive measurements of physical phenomenon. Unlike quantum computing, quantum sensing is available now, though in general at research laboratories. A notable commercially-available quantum sensing device is the ubiquitous Superconducting Quantum Interference Device (SQUID), which can measure faint magnetic fields such as found in the human brain. Quantum sensing is used for direct measurement of environmental phenomenon, such as electromagnetic fields and accelerations, which then are used for certain applications. For example, quantum sensing of accelerations is useful for Position, Navigation, and Timing (PNT) applications. It is not clear, however, how quantum sensing can be useful for nuclear safeguards. This report provides first a background in quantum sensing, followed by a survey of potential safeguards utilizations of quantum sensing. Several potential safeguards applications are identified and explored.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Novel Quantum Dot Technology Shows Promise in Simplifying Vehicle and Structural Surface Inspections

A team of researchers from both the Air Force Institute and Technology and Los Alamos National Laboratory are developing a paint that contains a material called quantum dots which can optically measure deformation of a surface. Quantum dots are the same materials used in new QLED television displays; however, they can also be used for a multitude of sensing applications such as deformation. The researchers used a new method of applying an interfacial layer between the quantum dot paint and the surface under investigation to help adhesion in harsh environments. The primary motivation behind this research is to make both quality assurance and maintenance of aircraft easier for the warfighter. The researchers’ efforts started in 2019 and are continuing. The technology works by shining a light onto the surface of the paint and the dots will emit back a wavelength of light that relates to the amount of deformation the surface is going through. This has the promise to allow for real-time 2D surface measurements that is more affordable than other 2D surface measurement alternatives.

42 ENGINEERING↗

Direct Observation of Collective Electronuclear Modes about a Quantum Critical Point

We directly measure the low energy excitation modes of the quantum Ising magnet LiHoF 4 using microwave spectroscopy. Instead of a single electronic mode, we find a set of collective electronuclear modes, in which the spin-1/2 Ising electronic spins hybridize with the bath of spin-7/2 Ho nuclear spins. The lowest-lying electronuclear mode softens at the approach to the quantum critical point, even in the presence of disorder. This softening is rapidly quenched by a longitudinal magnetic field. Similar electronuclear structures should exist in other spin-based quantum Ising systems.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Single-Shot Readout and Weak Measurement of a Tin-Vacancy Qubit in Diamond

The negatively charged tin-vacancy center in diamond (SnV − ) is an emerging platform for building the next generation of long-distance quantum networks. This is due to the SnV − ’s favorable optical and spin properties including bright emission, insensitivity to electronic noise, and long spin coherence times at temperatures above 1 K. Here, we demonstrate measurement of a single SnV − electronic spin with a single-shot readout fidelity of 87.4%, which can be further improved to 98.5% by conditioning on multiple readouts. In the process, we develop understanding of the relationship between strain, magnetic field, spin readout, and microwave spin control. We show that high-fidelity readout is compatible with rapid microwave spin control, demonstrating a favorable parameter regime for use of the SnV − center as a high-quality spin-photon interface. Finally, we use weak quantum measurement to study measurement-induced dephasing; this illuminates the fundamental interplay between measurement and decoherence in quantum mechanics, and provides a universal method to characterize the efficiency of color-center spin readout. Taken together, these results overcome an important hurdle in the development of the SnV − -based quantum technologies and, in the process, develop techniques and understanding broadly applicable to the study of solid-state quantum emitters.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Intrinsic Bulk Quantum Oscillations in a Bulk Unconventional Insulator SmB 6

The finding of bulk quantum oscillations in the Kondo insulator SmB 6 proved a considerable surprise. Subsequent measurements of bulk quantum oscillations in other correlated insulators including YbB 12 lent support to our discovery of a class of bulk unconventional insulators that host bulk quantum oscillations. Here we perform a series of experiments to examine evidence for the intrinsic character of bulk quantum oscillations in floating zone-grown single crystals of SmB 6 that have been the subject of our quantum oscillation studies. We present results of thermodynamic, transport, and composition analysis experiments on pristine floating zone-grown single crystals of SmB 6 and compare quantum oscillations with metallic LaB 6 and elemental aluminum. These results establish the intrinsic origin of quantum oscillations from the insulating bulk of floating zone-grown SmB 6 . The similarity of the Fermi surface in insulating SmB 6 with the conduction-electron Fermi surface in metallic hexaborides is at the heart of a theoretical mystery.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A near-optimum receiver structure for the detection of M-ary optical PPM signals

A class of receivers called conditionally nulling receivers is defined for quantum noise limited optical communications. These receivers have the ability to decide at each moment in time whether or not to coherently combine a predetermined local oscillator field with the received optical field, prior to performing an energy measurement (photodetection) on the combined field. Conditionally nulling receivers are applicable to pulse position modulation and related modulation schemes, which have the property that, at each moment in time, the transmitted signal is in one of only two states, on or off. The local oscillator field which may or may not be added by the receiver is an exact replica of the negative of the received on field; hence, the receiver can exactly null the on signal if the on signal is present and the receiver chooses to use the local field. An ideal conditionally nulling receiver achieves very nearly the same error probability (within a multiplicative factor varying froom 1 to 2.15) as the optimum quantum measurement for quantum noise limited detection of M-ary PPM signals. In contrast, other known receiving methods, such as direct, heterodyne, and homodyne detection, are exponentially suboptimum.

Dolinar, S. J., Jr.↗

NASA and External Quantum Sensing Capability Assessment for NASA Space-Based Science Measurements

The Subject Matter Experts in the Sensors & Instrumentation Quantum Sensing Community of Practice (CoP) requested an independent technical assessment of the agency's capabilities in QS to understand NASA's internal needs and competencies related to QS and compare agency capabilities with those available externally including industry, academia, and other government agencies. The outcomes of the assessment will help the agency in establishing appropriate strategies and investments to develop and maintain the state-of-the-art sensing competence and capabilities required to meet the agency’s future needs. NASA Engineering and Safety Center Review Board approved the assessment request and assigned NASA Technical Fellow to lead and conduct the assessment by engaging NASA Centers, NASA HQ and an independent, non-commercial, and highly credible Quantum Sensing Experts from Academia, Department of Defense, other Government Agencies. The assessment started in October 2021 and final report was completed in October 2023.

External Quantum Sensing↗

Estimating Eigenenergies from Quantum Dynamics: A Unified Noise-Resilient Measurement-Driven Approach

Ground state energy estimation in physical, chemical, and materials sciences is one of the most promising applications of quantum computing. In this work, we introduce a new hybrid approach that finds the eigenenergies by collecting real-time measurements and post-processing them using the machinery of dynamic mode decomposition (DMD). From the perspective of quantum dynamics, we establish that our approach can be formally understood as a stable variational method on the function space of observables available from a quantum many-body system. We also provide strong theoretical and numerical evidence that our method converges rapidly even in the presence of a large degree of perturbative noise, and show that the method bears an isomorphism to robust matrix factorization methods developed independently across various scientific communities. Our numerical benchmarks on spin and molecular systems demonstrate an accelerated convergence and a favorable resource reduction over state-of-the-art algorithms. The DMD-centric strategy can systematically mitigate noise and stands out as a leading hybrid quantum-classical eigensolver.

Shen, Yizhi↗

Comparative performance of HgCdTe photodiodes for heterodyne application

Photodiodes used as photomixers in heterodyne applications display quantum efficiencies that are lower than the dc quantum efficiency of the device. Measurement techniques used to obtain dc quantum efficiencies, midband heterodyne quantum efficiencies, and frequency roll off characteristics are described. Measurement results for two HgCdTe photodiodes are given and discussed. It is recommended that photodiodes used in heterodyne applications be tested for heterodyne quantum efficiency over the frequency band of interest for the particular application.

Kowitz, H. R.↗

Classifying One-Dimensional Quantum States Prepared by a Single Round of Measurements

Measurements and feedback have emerged as powerful resources for creating many-body quantum states. However, a detailed understanding has been restricted to fixed-point representatives of phases of matter. Here, we go beyond this and characterize the patterns of many-body entanglement that can be deterministically created from measurement. Focusing on one spatial dimension, a framework is developed for the case where a single round of measurements is the only entangling operation. We show this creates matrix-product states and identify necessary and sufficient tensor conditions for preparability, which uniquely determine the preparation protocol. We use these conditions to both classify preparable quantum states and characterize their physical constraints. In particular, we find a trade-off between the richness of the preparable entanglement spectrum and correlation functions, which leads to a no-go theorem for preparing certain quantum states. More broadly, we connect properties of the preparation protocol to the resulting phase of matter, including trivial, symmetry-breaking, and symmetry-protected topological phases—for both uniform and modulated symmetries. This work offers a resource-theoretic perspective on preparable quantum entanglement and shows how to systematically create states of matter, away from their fixed points, in quantum devices. Published by the American Physical Society 2025

Sahay, Rahul (ORCID:0000000174579826)↗

Impact of doped barriers on the recombination coefficients of c -plane InGaN/GaN single quantum well light-emitting diodes

Differential carrier lifetime measurements were performed on c-plane InGaN/GaN single quantum well (QW) light-emitting diodes (LEDs) of different QW indium compositions as well as with and without doped barriers. Mg-doped p-type and Si-doped n-type barriers close to the QW were used to reduce the net internal electric field in the QW, thereby improving the electron–hole wavefunction overlap on the LEDs. LEDs with doped barriers show short lifetimes and low carrier densities in the active region compared to the reference LEDs. The recombination coefficients in the ABC model were estimated based on the carrier lifetime and quantum efficiency measurements. The improvement in the radiative coefficients in the LEDs with doped barriers coupled with the blueshift of the emission wavelengths indeed indicates an enhancement in wavefunction overlap and a reduction of quantum confined Stark effect as a result of the reduced internal electric field. However, doped barriers also introduce non-radiative recombination centers and thereby increase the Shockley–Read–Hall (SRH) coefficient, although the increment is less for LEDs with high indium composition QWs. As a result, at high indium composition (22%), LEDs with doped barriers outperform the reference LEDs even though the trend is reversed for LEDs with lower indium composition (13.5%). In conclusion, despite the trade-off of higher SRH coefficients, doped barriers are shown to be effective in reducing the internal electric field and increasing the recombination coefficients.

42 ENGINEERING↗

Entanglement rearrangement in self-consistent nuclear structure calculations

Background: Entanglement plays a central role in a diverse array of increasingly important research areas, including quantum computation, simulation, measurement, sensing, and communication. Extensive suites of investigations have been performed to better understand entanglement in atomic and molecular quantum many-body systems, while the exploration of entanglement in the structure of nuclei and their reactions is presently in its infancy. Purpose: The goal of this work is to begin investigating the entanglement properties of nuclei from first-principles nuclear many-body calculations. We attempt to identify common features and emergent structures of entanglement that could ultimately lead to new and natural many-body schemes. With an eye toward quantum accelerators in future hybrid-supercomputers, criteria for partitioning nuclear many-body calculations into quantum and classical components may provide advantages in future large-scale computations. Along the way we look for explanations of the relative success of phenomenological models such as the nuclear shell model, and for better ways to match to low-energy nuclear effective field theories and lattice QCD calculations to nuclear many-body techniques that are based upon entanglement. Method: We explore the entanglement between single-particle states in 4 He and 6 He. The patterns of entanglement emerging from different single-particle bases are compared, and possible links with the convergence of observables are explored, in particular, ground-state energies. The nuclear wave functions are obtained by performing active-space no-core configuration-interaction calculations using a two-body nucleon-nucleon interaction derived from chiral effective field theory. Entanglement measures within single-particle bases exhibiting different degrees of complexity are determined, in particular, harmonic oscillator (HO), Hartree-Fock (HF), natural (NAT) and variational natural (VNAT) bases. Specifically, single-orbital entanglement entropy, two-orbital mutual information, and negativity are studied. Results: The entanglement structures in 4 He and 6 He are found to be more localized within NAT and VNAT bases than within a HO basis for the optimal HO parameters we have worked with. In particular a core-valence structure clearly emerges from the full no-core calculation of 6 He. Here, the two-nucleon mutual information shows that the VNAT basis, which typically exhibits good convergence properties, effectively decouples the active and inactive spaces. Conclusions: Measures of one- and two-nucleon entanglement are found to be useful in analyzing the structure of nuclear wave functions, in particular the efficacy of basis states, and may provide useful metrics toward developing more efficient schemes for ab initio computations of the structure and reactions of nuclei, and quantum many-body systems more generally.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Neural-network decoders for measurement induced phase transitions

Open quantum systems have been shown to host a plethora of exotic dynamical phases. Measurement-induced entanglement phase transitions in monitored quantum systems are a striking example of this phenomena. However, naive realizations of such phase transitions requires an exponential number of repetitions of the experiment which is practically unfeasible on large systems. Recently, it has been proposed that these phase transitions can be probed locally via entangling reference qubits and studying their purification dynamics. In this work, we leverage modern machine learning tools to devise a neural network decoder to determine the state of the reference qubits conditioned on the measurement outcomes. We show that the entanglement phase transition manifests itself as a stark change in the learnability of the decoder function. We study the complexity and scalability of this approach in both Clifford and Haar random circuits and discuss how it can be utilized to detect entanglement phase transitions in generic experiments.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗