Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “polycrystalline”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Quantum Efficiency Gain in 2D Perovskite Photo and X‐Ray Detectors

Abstract The perovskite polycrystalline thin film detector fabricated by solution method is a promising low‐cost, scalable technology for radiation imaging, but its thin volume limits the sensing efficiency for high‐energy X‐ray photons. This work reports 2D perovskite thin film photo‐diodes with a detection gain when sensing visible and X‐ray photons. Detailed power and temperature‐dependent device characterizations reveal a charge multiplication effect to be responsible for the observed high gain. This is caused by a disparity in electron and hole transport, where electron transport is retarded by a trap/de‐trap process via shallow trap states, whereas the hole transport is fast enough to produce a photoconductive gain in satisfying the charge neutrality. The 2D perovskite made with butylamine spacers is also found to exhibit a larger efficiency gain than those made with phenylethylamines because of the higher likelihood of forming shallow traps in the former. The thin film diodes feature a high temporal response over 1 MHz due to the fast charge collection across a thin volume, and the discovery provides device physics mechanisms in connection to material structure‐function relationship for future optoelectronics design that can boost the efficiency of X‐ray sensing and dim light detection.

2D perovskites↗
DOE OSTI2022

Scalable Al 2 O 3 –TiO 2 Conductive Oxide Interfaces as Defect Reservoirs for Resistive Switching Devices

Abstract Resistive switching devices herald a transformative technology for memory and computation, offering considerable advantages in performance and energy efficiency. Here, a simple and scalable material system of conductive oxide interfaces is employed, and their unique properties are leveraged for a new type of resistive switching device. An Al 2 O 3 –TiO 2 ‐based valence‐change resistive switching device, where the conductive oxide interface serves both as the bottom electrode and as a reservoir of defects for switching, is demonstrated. The amorphous–polycrystalline Al 2 O 3 –TiO 2 conductive interface is obtained following the technological path of simplifying the fabrication of the 2D electron gases (2DEGs), making them scalable for practical mass integration. Physical analysis of the device chemistry and microstructure with comprehensive electrical analysis of its switching behavior and performance is combined. The origin of the resistive switching is pinpointed to the conductive oxide interface, which serves both as the bottom electrode and as a reservoir of oxygen vacancies. The latter plays a key role in valence‐change resistive switching devices. The new device, based on scalable and complementary metal–oxide–semiconductor (CMOS)‐technology‐compatible fabrication processes, opens new design spaces toward increased tunability and simplification of the device selection challenge.

36 MATERIALS SCIENCE↗
DOE OSTI2020

CsI-Antisolvent Adduct Formation in All-Inorganic Metal Halide Perovskites

The excellent optoelectronic properties shown by hybrid organic/inorganic metal halide perovskites are all predicated on precisely controlling the exact nucleation and crystallization dynamics that occur during film formation. In general, high-performance thin films are obtained by a method commonly called solvent engineering (or antisolvent quench) processing. The solvent engineering method removes excess solvent, but importantly leaves behind solvent that forms chemical adducts with the lead-halide precursor salts. These adduct-based precursor phases control nucleation and the growth of the polycrystalline domains. There has not yet been a comprehensive study comparing the various antisolvents used in different perovskite compositions containing cesium. In addition, there have been no reports of solvent engineering for high efficiency in all-inorganic perovskites such as CsPbI 3 . In this work, inorganic perovskite composition CsPbI 3 is specifically targeted and unique adducts formed between CsI and precursor solvents and antisolvents are found that have not been observed for other A-site cation salts. These CsI adducts control nucleation more so than the PbI 2 -dimethyl sulfoxide (DMSO) adduct and demonstrate how the A-site plays a significant role in crystallization. The use of methyl acetate (MeOAc) in this solvent engineering approach dictates crystallization through the formation of a CsI-MeOAc adduct and results in solar cells with a power conversion efficiency of 14.4%.

14 SOLAR ENERGY↗
DOE OSTI2020

Imaging Carrier Dynamics and Transport in Hybrid Perovskites with Transient Absorption Microscopy

In this review, the recent progress in using transient absorption microscopy to image charge transport and dynamics in semiconducting hybrid organic–inorganic perovskites is discussed. The basic principles, instrumentation, and resolution of transient absorption microscopy are outlined. With temporal resolution as high as 10 fs, sub-diffraction-limit spatial resolution, and excited-state structural resolution, these experiments have provided crucial details on charge transport mechanisms that have been previously obscured in conventional ultrafast spectroscopy measurements. Morphology-dependent mapping unveils spatial heterogeneity in carrier recombination and cooling dynamics. By spatially separating the pump and probe beams, carrier transport across grain boundaries has been directly visualized. Further, femtosecond temporal resolution allows for the examination of nonequilibrium transport directly, revealing extraordinarily long-range hot carrier migration. The application of transient absorption microscopy is not limited to hybrid perovskites but can also be useful for other polycrystalline materials in which morphology plays an important role in carrier transport.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Nonuniform Ionic and Electronic Transport of Ceramic and Polymer/Ceramic Hybrid Electrolyte by Nanometer-Scale Operando Imaging for Solid-State Battery

Replacing the liquid electrolyte in lithium batteries with solid-state ion conductor is promising for next-generation energy storage that is safe and has high energy density. In this work, nanometer-resolution ionic and electronic transport imaging of Li 3 PS 4 (LPS), a solid-state electrolyte (SSE), is reported. This nm resolution is achieved by using a logarithm-scale current amplifier that enhances the current sensitivity to the fA range. Large fluctuations of ion current—one to two orders of magnitude on the LPS and on the LPS region of a polymer/LPS bulk hybrid SSE—that must be mitigated to eliminate Li dendrite formation and growth, are found. This ion current fluctuation is understood in terms of highly anisotropic transport kinetic barriers along the different crystalline axes due to different grain orientations in the polycrystalline and glass ceramic materials. The results on the bulk hybrid SSE show a sharp transition of ionic and electronic transport at the LPS/polymer boundary and decreases in average ionic current with decreasing polyimine particle size and with extensive cycling. The results elucidate the mechanism of polyimine extension into interparticles to prevent Li dendrite growth. This work opens up novel characterization of charge transport, which relates to Li plating and stripping for solid-state-batteries.

Li3PS4↗
DOE OSTI2021

Local Multimodal Electro-Chemical-Structural Characterization of Solid-Electrolyte Grain Boundaries

Typical models of polycrystalline ionic materials treat the grain boundary properties as single valued, without consideration of the full range of values that define the macroscopically measured average. Here a unique experimental platform suitable for local multimodal characterization of individual grain boundaries in bicrystal fibers is reported. A variation of three orders of magnitude in the grain boundary conductivity of ceria is observed, as measured across six individual bicrystals by both alternating current impedance spectroscopy and direct current (D.C.) linear sweep voltammetry. Nonlinear behavior of the D.C. measurements is consistent with resistance due to a space charge effect. Time-of-flight secondary ion beam spectroscopy reveals a correlation between grain boundary resistance and the concentration of impurities Si, Al, and Ca segregated at the grain boundaries, although the bulk concentrations of these impurities are negligible. Electron backscatter diffraction analysis of the crystal orientations suggests a correlation between the misorientation across the grain boundaries and grain boundary resistance. These correlations point towards a grain boundary resistance that arises from impurity-generated space charge effects and variations in impurity concentration and hence resistivity driven by the energetics of impurity segregation to grain boundaries of differing surface energies.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Nanopinhole Passivating Contact Si Solar Cells Fabricated with Metal-Assisted Chemical Etching

Monocrystalline Si (c-Si) solar cells with passivating contacts based on doped polycrystalline Si (poly-Si) on ≈2.0 nm silicon oxide (SiO x ) require >1000 °C thermal processing to create conducting pinholes in the SiO x layer. However, this high thermal budget can induce bulk defects in the Czochralski c-Si wafers used as the cell absorber layer. We demonstrate that pinholes can instead be created using metal-assisted chemical etching on planar or textured morphologies, at room temperature. This wet process creates up to 200 nm wide conducting pinholes that are directly observed with transmission electron and atomic force microscopies. High-performance hole-selective poly-Si/SiN y /SiO x and electron-selective poly-Si/SiO x passivating contacts are fabricated and implemented in laboratory-scale solar cells. This process development significantly broadens the range of passivation layer materials, their thicknesses, and surface morphologies, which enables the design of poly-Si contacts with superior passivating quality.

14 SOLAR ENERGY↗
DOE OSTI2024

Additive‐Free Oxidized Spiro‐MeOTAD Hole Transport Layer Significantly Improves Thermal Solar Cell Stability

Perovskite solar cells are among the most promising new solar technologies, already surpassing polycrystalline silicon solar cell efficiencies. The stability of the highest efficiency devices at elevated temperature is, however, poor. These cells typically use Spiro-MeOTAD as the hole transporting layer. It is generally believed that additives, required for enhancing electrical conductivity and optimizing energy level alignment, are responsible for the reduced stability—inferring that Spiro-MeOTAD based hole transporting layers are intrinsically unstable. Here, a reliable noble metal free synthesis of Spiro-MeOTAD (bis(trifluoromethane)sulfonimide) 4 is presented which is used as the oxidizing agent. No additives are added to the partially oxidized Spiro-MeOTAD hole-transporting layer. Device efficiencies up to 24.2% are achieved. Electrical conductivity is largely developed by the first 1% oxidation. Further oxidation shifts the energy levels away from the vacuum level, which allows tuning of the energy level alignment without the use of additives—contradicting the current understanding of this system. Without additives, devices demonstrate significant improvement in stability at elevated temperatures up to 85 °C under one sun over 1400 h continuous illumination. The remaining degradation is pinpointed to ion migration and reactions in the perovskite layer which may be further suppressed with compositional engineering and adequate ion barrier layers.

14 SOLAR ENERGY↗
DOE OSTI2025

Effect of Propagating Dopant Reactivity on Lattice Oxygen Loss in LLZO Solid Electrolyte Contacted with Lithium Metal

Lithium lanthanum zirconium oxide (LLZO) is widely known as the most stable solid electrolyte against lithium metal electrodes. This thermodynamic stability can be lost by the presence of dopants which are required to stabilize the cubic phase of LLZO and can be reduced by lithium metal. However, the role of oxygen in such reactions is taken for granted. In this work, the reduction of Nb-substituted LLZO (Nb-LLZO) is explored by Li metal and shows that interfacial reactions propagate and lead to the decomposition with substantial Nb 5+ reduction deep into the bulk electrolyte. Scanning Transmission Electron Microscopy with Energy Dispersive X-ray Spectroscopy and thermogravimetric analyses show much of the reduction is due to oxygen vacancies formed, leading to increased electronic conductivity mapped with conductive Atomic Force Microscopy. Density functional theory calculations indicate oxygen release is favored by increased excess lithiation of Nb-LLZO. Electrochemical impedance of polycrystalline Nb-LLZO shows the continuous evolution of ionically resistive interphases near the lithium metal interface with Nb-LLZO while single crystals show little reactivity at room temperature and self-limiting reduction at 60°C. This work underlines the role of grain boundaries in propagating destructive solid electrolyte reactions and highlights previously unseen mechanisms involving lattice oxygen in LLZO.

Li metal, solid-state electrolytes↗
DOE OSTI2023

Organic Additive‐derived Films on Cu Electrodes Promote Electrochemical CO 2 Reduction to C 2+ Products Under Strongly Acidic Conditions

Abstract Electrochemical CO 2 reduction (CO 2 R) at low pH is desired for high CO 2 utilization; the competing hydrogen evolution reaction (HER) remains a challenge. High alkali cation concentration at a high operating current density has recently been used to promote electrochemical CO 2 R at low pH. Herein we report an alternative approach to selective CO 2 R (>70 % Faradaic efficiency for C 2+ products, FE C2+ ) at low pH (pH 2; H 3 PO 4 /KH 2 PO 4 ) and low potassium concentration ([K + ]=0.1 M) using organic film‐modified polycrystalline copper (Modified‐Cu). Such an electrode effectively mitigates HER due to attenuated proton transport. Modified‐Cu still achieves high FE C2+ (45 % with Cu foil /55 % with Cu GDE) under 1.0 M H 3 PO 4 (pH≈1) at low [K + ] (0.1 M), even at low operating current, conditions where HER can otherwise dominate.

Nie, Weixuan↗
DOE OSTI2023

Hydrogen Evolution on Electrode‐Supported Pt n Clusters: Ensemble of Hydride States Governs the Size Dependent Reactivity

Abstract We report the size‐dependent activity and stability of supported Pt 1,4,7,8 for electrocatalytic hydrogen evolution reaction, and show that clusters outperform polycrystalline Pt in activity, with size‐dependent stability. To understand the size effects, we use DFT calculations to study the structural fluxionality under varying potentials. We show that the clusters can reshape under H coverage and populate an ensemble of states with diverse stoichiometry, structure, and thus reactivity. Both experiment and theory suggest that electrocatalytic species are hydridic states of the clusters (≈2 H/Pt). An ensemble‐based kinetic model reproduces the experimental activity trend and reveals the role of metastable states. The stability trend is rationalized by chemical bonding analysis. Our joint study demonstrates the potential‐ and adsorbate‐coverage‐dependent fluxionality of subnano clusters of different sizes and offers a systematic modeling strategy to tackle the complexities.

Zhang, Zisheng↗
DOE OSTI2023

Organic Additive–derived Films on Cu Electrodes Promote Electrochemical CO 2 Reduction to C 2+ Products Under Strongly Acidic Conditions

Electrochemical CO 2 reduction (CO 2 R) at low pH is desired for high CO 2 utilization; the competing hydrogen evolution reaction (HER) remains a challenge. High alkali cation concentration at a high operating current density has recently been used to promote electrochemical CO 2 R at low pH. Herein we report an alternative approach to selective CO2R (>70 % Faradaic efficiency for C 2+ products, FE C2+ ) at low pH (pH 2; H 3 PO 4 /KH 2 PO 4 ) and low potassium concentration ([K + ]=0.1 M) using organic film-modified polycrystalline copper (Modified-Cu). Furthermore, such an electrode effectively mitigates HER due to attenuated proton transport. Modified-Cu still achieves high FE C2+ (45 % with Cu foil /55 % with Cu GDE) under 1.0 M H 3 PO 4 (pH≈1) at low [K + ] (0.1 M), even at low operating current, conditions where HER can otherwise dominate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Hydrogen Evolution on Electrode–Supported Ptn Clusters: Ensemble of Hydride States Governs the Size Dependent Reactivity

We report the size-dependent activity and stability of supported Pt1,4,7,8 for electrocatalytic hydrogen evolution reaction, and show that clusters outperform polycrystalline Pt in activity, with sizedependent stability. To understand the size effects, we use DFT calculations to study the structural fluxionality under varying potentials. We show that the clusters can reshape under H coverage and populate an ensemble of states with diverse stoichiometry, structure, and thus reactivity. Both experiment and theory suggest that electrocatalytic species are hydridic states of the clusters (~2 H/Pt). An ensemble-based kinetic model reproduces the experimental activity trend and reveals the role of metastable states. Furthermore, the stability trend is rationalized by chemical bonding analysis. Our joint study demonstrates the potential- and adsorbate-coverage-dependent fluxionality of subnano clusters of different sizes and offers a systematic modeling strategy to tackle the complexities.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Magnetocaloric Effect in Lightly‐Doped Fe 5 Si 3 Single Crystals

Abstract Development of promising new materials for above room temperature magnetic cooling applications relies on careful balancing of structure and composition to maximize accessible metastable phases that can drive a strong magnetocaloric effect (MCE). However, the working temperatures of these materials may fall outside of desired application windows. In this work, it is shown that it is possible to control metastable phase stability temperatures of Fe 5 Si 3 through selection of appropriate spin and charge doping. Here, the parent material's desired structure appears only within a narrow temperature range from 1098 to 1303 K. Doping with Mn and P is shown to allow stabilization of the parent's high temperature phase and resulting MCE to room temperature. The structural and magnetic properties, and the magnetocaloric effect of single crystal Fe 4.83 Mn 0.16 Si 2.91 P 0.09 (FMSP) are investigated experimentally and theoretically. A first‐order magneto‐elastic transition is observed at 348 K, where magnetic onset is accompanied by a change in lattice volume without an apparent change in crystal symmetry. Although the trace Mn and P doping are found to decrease the T C , the maximum magnetic entropy change Δ S Max ( T ) and the relative cooling power (RCP) of FMSP are enhanced compared to polycrystalline Fe 5 Si 3 . As a result, an intrinsically broader entropy change over a larger temperature span is generated in the lightly doped single crystal of Fe 5 Si 3 . The magnetic moment of the system is also enhanced. Density functional theory (DFT) calculations are performed to gain microscopic insights into the experimental findings. The results suggest that the hexagonal Fe 5 Si 3 is a new giant room temperature MCE material that is on par with La–Fe–Si and Fe‐Mn‐P‐Si systems.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Divergent Responses of Carbon Nitride Dot‐Based Amorphous Species and Small Molecule Hybrids to Trace Level Analytes

Bottom-up synthesis of carbon nitride dots (CNDs) offers a versatile platform for the creation of diverse nanomaterials with tunable properties. Here, we report a facile hydrothermal approach using citric acid (CA) and urea (U) as precursors to synthesize CNDs with varying degrees of condensation and crystallinity. By carefully controlling reaction conditions and post-synthetic treatments, we obtained two distinct fractions: a polycrystalline fraction composed of small-molecule hybrids and an amorphous fraction containing CNDs. We then sought to understand how the dominant species in these fractions impact sensing abilities using trace-level explosive exemplars. In conclusion, the results have important implications for sensing and related applications where understanding the complex interplay between synthetic conditions and post-synthetic processing play vital roles in determining the final properties of CND materials.

carbon nitride dots↗
DOE OSTI2020

Hydrogen Bonding Optimizes Singlet Fission in Carboxylic Acid Functionalized Anthradithiophene Films

The rate of singlet fission, the process of generating two triplet excitons with photoexcitation of one singlet exciton, depends on a combination of singlet/triplet energy balance and intermolecular coupling. In this work, we perform carboxylic acid functionalization of anthradithiophene (ADT) derivatives that result in hydrogen bonds that drive molecular orientation and strong electronic coupling of polycrystalline ADT thin films, leading to ultrafast singlet fission without significant enthalpic driving force. ADT with a single carboxylic acid group exhibits weak intermolecular coupling and slow and inefficient singlet fission, much like the parent ADT, and substitution of different alkylsilyl solubilizing groups has little effect. However, the addition of two carboxylic acid groups on either end of the long axis favors significant coupling and crystallinity in as-deposited thin films that increase the effective singlet fission rate by roughly three orders of magnitude. The properties of the triplet pair, particularly its propensity to form long-lived independent triplets, are also influenced by the degree of long-range intermolecular coupling. The enhancement of intermolecular coupling specific to singlet fission using the ubiquitous cyclic hydrogen bonding motif could impact triplet pair utilization schemes in a variety of contexts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Pulsed Laser Annealed Ga Hyperdoped Poly‐Si / SiO x Passivating Contacts for High‐Efficiency Monocrystalline Si Solar Cells

Polycrystalline Si ( poly ‐Si)‐based passivating contacts are promising candidates for high‐efficiency crystalline Si solar cells. We show that nanosecond‐scale pulsed laser melting (PLM) is an industrially viable technique to fabricate such contacts with precisely controlled dopant concentration profiles that exceed the solid solubility limit. We demonstrate that conventionally doped, hole‐selective poly ‐Si/SiO x contacts that provide poor surface passivation of c ‐Si can be replaced with Ga‐ or B‐doped contacts based on non‐equilibrium doping. We overcome the solid solubility limit for both dopants in poly ‐Si by rapid cooling and recrystallization over a timescale of ∼25 ns. We show an active Ga dopant concentration of ∼3 × 10 20 cm −3 in poly ‐Si which is six times higher than its solubility limit in c ‐Si, and a B dopant concentration as high as ∼10 21 cm −3 . We measure an implied open‐circuit voltage of 735 mV for Ga‐doped poly ‐Si/SiO x contacts on Czochralski Si with a low contact resistivity of 35.5 ± 2.4 mΩ cm 2 . Scanning spreading resistance microscopy and Kelvin probe force microscopy show large diffusion and drift current in the p ‐ n junction that contributes to the low contact resistivity. Our results suggest that PLM can be extended for hyperdoping of other semiconductors with low solubility atoms to enable high‐efficiency devices.

14 SOLAR ENERGY↗
DOE OSTI2021

Morphology, microstructure, and doping behaviour: A comparison between different deposition methods for poly-Si/SiO x passivating contacts

In this work, we study how crystallographic structures, optoelectronic properties, and nanoscale surface morphologies of ex situ phosphorus-doped polycrystalline silicon (poly-Si)/SiO x passivating contacts, formed by different deposition methods (sputtering, plasma-enhanced chemical vapour deposition [PECVD], and low-pressure chemical vapour deposition [LPCVD]), are investigated and compared. Across all these deposition technologies, we noted the same trend: higher diffusion temperatures yield films that are more crystalline but that have rougher surface morphologies due to bigger surface crystal grains. Also, the recrystallization process of the as-deposited Si films starts from the SiO x interface, rather than from the film surface and bulk. However, there are some distinct differences among these technologies. First, the LPCVD method yields the lowest deposition rate, roughest surfaces, and smallest degree of crystallinity on finished poly-Si films. In contrast, the PECVD method has the highest deposition rate and smoothest surfaces for both as-deposited Si and annealed poly-Si films. Second, as-deposited sputtered and PECVD Si films contain only an amorphous phase, whereas as-deposited LPCVD films already has some crystalline phase. Third, the LPCVD phosphorus in-diffusion into the substrate depends strongly on the initial film thickness, whereas for the other two methods, it is weakly dependent on thickness. Finally, the passivation quality of every poly-Si film type has different responses to the film thickness and diffusion temperature, suggesting that the ex situ doping optimization should be performed independently.

14 SOLAR ENERGY↗