Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “point spectrum”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

An assessment of the impact of spacecraft glow on the Hubble space telescope. Summary of existing observations and theory

Visible spacecraft glow was first observed on the Atmospheric Explorer spacecraft (AE-E) and studied in some detail with the Visible Airglow Experiment (VAE). The AE-E was a spin-stabilized spacecraft without thrusters at an altitude of 140 to 280 km. The VAE contained six visible wavelength photometers that measured a glow spectrum which: (1) rose steeply in the red, (2) decreased with a cos cubed PH1 dependence from pointing into the ram direction of the spacecraft orbital motion, and (3) decreased in intensity with increasing altitude with the same dependence as the measured atomic oxygen number atmospheric density (O) and not with the measured molecular nitrogen density (N sub 2). It is proposed that the glow is produced by chemical reactions on the spacecraft surface as it sweeps through the atmospheric O, with roughly 5-8 eV per O atom available for excitation from the orbital motion of the spacecraft. This glow may in principal be produced by any of a number of species, including molecular band emission from OH, NO, and NO2. An attempt is made to scale the observed glow to the Hubble space telescope.

Clarke, J. T.↗
NASA NTRS1987

Gamma-ray observations of the Crab Region using a coded-aperture telescope

The region of the Galactic anticenter, including the Crab Nebula, was observed during a balloon flight of the University of New Hampshire Directional Gamma-Ray Telescope employing the coded-aperture imaging technique to image celestial gamma-radiation between 160 keV and 9.3 MeV. The background systematics are treated with a simple and relatively straightforward correction procedure. The results demonstrate that the coded-aperture procedure is a viable approach for imaging not only point sources of radiation, but also extended sources of emission. The results for the Crab's photon spectrum are consistent with a power-law spectrum. Upper limits on the flux levels of line emission at 405 keV and 1050 keV and on the flux from the X-ray binary source A0535 + 26 and diffuse Galactic emission from the anticenter region are derived.

Mcconnell, M. L.↗
NASA NTRS1993

Red edge spectral measurements from sugar maple leaves

Many sugar maple stands in the northeastern United States experienced extensive insect damage during the 1988 growing season. Chlorophyll data and high spectral resolution spectrometer laboratory reflectance data were acquired for multiple collections of single detached sugar maple leaves variously affected by the insect over the 1988 growing season. Reflectance data indicated consistent and diagnostic differences in the red edge portion (680-750 nm) of the spectrum among the various samples and populations of leaves. These included differences in the red edge inflection point (REIP), a ratio of reflectance at 740-720 nm (RE3/RE2), and a ratio of first derivative values at 715-705 nm (D715/D705). All three red edge parameters were highly correlated with variation in total chlorophyll content. Other spectral measures, including the Normalized Difference Vegetation Index (NDVI) and the Simple Vegetation Index Ratio (VI), also varied among populations and over the growing season, but did not correlate well with total chlorophyll content. Leaf stacking studies on light and dark backgrounds indicated REIP, RE3/RE2 and D715/D705 to be much less influenced by differences in green leaf biomass and background condition than either NDVI or VI.

Vogelmann, J. E.↗
NASA NTRS2007

Pixelation Effects in Weak Lensing

Weak gravitational lensing can be used to investigate both dark matter and dark energy but requires accurate measurements of the shapes of faint, distant galaxies. Such measurements are hindered by the finite resolution and pixel scale of digital cameras. We investigate the optimum choice of pixel scale for a space-based mission, using the engineering model and survey strategy of the proposed Supernova Acceleration Probe as a baseline. We do this by simulating realistic astronomical images containing a known input shear signal and then attempting to recover the signal using the Rhodes, Refregier, and Groth algorithm. We find that the quality of shear measurement is always improved by smaller pixels. However, in practice, telescopes are usually limited to a finite number of pixels and operational life span, so the total area of a survey increases with pixel size. We therefore fix the survey lifetime and the number of pixels in the focal plane while varying the pixel scale, thereby effectively varying the survey size. In a pure trade-off for image resolution versus survey area, we find that measurements of the matter power spectrum would have minimum statistical error with a pixel scale of 0.09' for a 0.14' FWHM point-spread function (PSF). The pixel scale could be increased to ~0.16' if images dithered by exactly half-pixel offsets were always available. Some of our results do depend on our adopted shape measurement method and should be regarded as an upper limit: future pipelines may require smaller pixels to overcome systematic floors not yet accessible, and, in certain circumstances, measuring the shape of the PSF might be more difficult than those of galaxies. However, the relative trends in our analysis are robust, especially those of the surface density of resolved galaxies. Our approach thus provides a snapshot of potential in available technology, and a practical counterpart to analytic studies of pixelation, which necessarily assume an idealized shape measurement method.

gravitational lensing↗
NASA NTRS2006

Rayleigh Scattering Diagnostic for Measurement of Temperature, Velocity, and Density Fluctuation Spectra

A molecular Rayleigh scattering technique is developed to measure dynamic gas temperature, velocity, and density in unseeded turbulent flows at sampling rates up to 10 kHz. A high power CW laser beam is focused at a point in a heated air jet plume and Rayleigh scattered light is collected and spectrally resolved. The spectrum of the light, which contains information about the temperature, velocity, and density of the flow, is analyzed using a Fabry-Perot interferometer. The circular interference fringe pattern is divided into four concentric regions and sampled at 1 and 10 kHz using photon counting electronics. Monitoring the relative change in intensity within each region allows for measurement of gas temperature and velocity. Independently monitoring the total scattered light intensity provides a measure of gas density. Power spectral density calculations of temperature, velocity, and density fluctuations, as well as mean and fluctuating quantities are demonstrated for various radial locations in the jet flow at a fixed axial distance from the jet exit plane. Results are compared with constant current anemometry and pitot probe measurements at the same locations.

Mielke, Amy F.↗
NASA NTRS2013

Assessing the Temperature Dependence of Narrow-Band Raman Water Vapor Lidar Measurements: A Practical Approach

Narrow-band detection of the Raman water vapor spectrum using the lidar technique introduces a concern over the temperature dependence of the Raman spectrum. Various groups have addressed this issue either by trying to minimize the temperature dependence to the point where it can be ignored or by correcting for whatever degree of temperature dependence exists. The traditional technique for performing either of these entails accurately measuring both the laser output wavelength and the water vapor spectral passband with combined uncertainty of approximately 0.01 nm. However, uncertainty in interference filter center wavelengths and laser output wavelengths can be this large or larger. These combined uncertainties translate into uncertainties in the magnitude of the temperature dependence of the Raman lidar water vapor measurement of 3% or more. We present here an alternate approach for accurately determining the temperature dependence of the Raman lidar water vapor measurement. This alternate approach entails acquiring sequential atmospheric profiles using the lidar while scanning the channel passband across portions of the Raman water vapor Q-branch. This scanning is accomplished either by tilt-tuning an interference filter or by scanning the output of a spectrometer. Through this process a peak in the transmitted intensity can be discerned in a manner that defines the spectral location of the channel passband with respect to the laser output wavelength to much higher accuracy than that achieved with standard laboratory techniques. Given the peak of the water vapor signal intensity curve, determined using the techniques described here, and an approximate knowledge of atmospheric temperature, the temperature dependence of a given Raman lidar profile can be determined with accuracy of 0.5% or better. A Mathematica notebook that demonstrates the calculations used here is available from the lead author.

Raman lidar↗
NASA NTRS2016

Evaluating Galactic Cosmic Ray Environment Models Using RaD-X Flight Data

Galactic cosmic rays enter Earth's atmosphere after interacting with the geomagnetic field. The primary galactic cosmic rays spectrum is fundamentally changed as it interacts with Earth's atmosphere through nuclear and atomic interactions. At points deeper in the atmosphere, such as at airline altitudes, the radiation environment is a combination of the primary galactic cosmic rays and the secondary particles produced through nuclear interactions. The RaD-X balloon experiment measured the atmospheric radiation environment above 20 km during 2 days in September 2015. These experimental measurements were used to validate and quantify uncertainty in physics-based models used to calculate exposure levels for commercial aviation. In this paper, the Badhwar-O'Neill 2014, the International Organization for Standardization 15390, and the German Aerospace Company galactic cosmic ray environment models are used as input into the same radiation transport code to predict and compare dosimetric quantities to RaD-X measurements. In general, the various model results match the measured tissue equivalent dose well, with results generated by the German Aerospace Center galactic cosmic ray environment model providing the best comparison. For dose equivalent and dose measured in silicon, however, the models were compared less favorably to the measurements.

Norman, R. B.↗
NASA NTRSDate not supplied

A Spectrum of Stakeholder Perspective Taking in Early-Stage Design

Stakeholder perspective taking is a critical skill in early-stage problem exploration and framing. We examined stakeholder perspective taking within a professional engineering early-stage design team at NASA to begin to understand in what ways and under what conditions designers adopt stakeholder perspectives. Our findings identify a spectrum of perspective taking during problem framing deliberations that ranges from (1) fully taking the stakeholder’s point of view (POV), (2) interpreting the stakeholder’s POV with a designer’s POV, (3) implanting the stakeholder’s POV into a designer’s POV, to (4) fully taking a designer’s own POV. We also begin to identify and describe conditions that encourage and hinder stakeholder perspective taking in real-world early-stage design settings. These findings are significant because they suggest ways to gauge and encourage the skill of perspective taking among highly technical engineers working on design challenges with real-world, societal implications.

perspective taking↗
NASA NTRSDate not supplied

Effect of Electronic Shot Noise on Dynamic Measurements using Optical Techniques: Examples from Rayleigh Scattering and Unsteady PSP

Electronic shot noise is an unavoidable reality in all optical techniques that depend on measuring light intensity. For steady-state, time-averaged measurements the impact of shot noise can be easily reduced by increasing the exposure time, or by averaging over multiple-exposures. That is not the case for unsteady measurements, where time histories of light intensity variations need to be created either by high-speed photography (unsteady PSP) or via photoelectron counting (spectrally resolved Rayleigh scattering) over short time durations using a photo-multiplier tube (PMT) and photon counting electronics. Electronic shot noise introduces a fixed amount of random error, which can overwhelm the light intensity variation caused by turbulent fluctuations. Spectrum computed from such time series shows a fixed noise floor that is independent of the number of data points in the time series. For a fixed optical system, where the collected power of the luminescent light (uPSP), or the scattered light (Rayleigh) is fixed, one needs to resort to special techniques to obtain enough signal-to noise ratio (SNR). For the uPSP application it is shown that averaging of the adjacent pixels improves SNR; although this may lead to a sacrifice of spatial resolution. A second means is to increase the exposure time, which leads to a lowering of the frequency range. For the Rayleigh application, improvements of SNR can be achieved via two different cross-correlation based approaches. The first involves measuring the light intensity using two PMTs using short, contiguous gates; thereby, creating two time-series of data. The second one involves collecting one long time-series of data using one set of measurement device, followed by an odd-even splitting into two time series. When the two time-series are cross-correlated, and a power spectrum is calculated, a significant reduction in the shot noise floor can be achieved. Examples from measurements of density and velocity fluctuations spectra from two different Rayleigh setup are presented to demonstrate the process.

uPSP↗
NASA NTRS2004

Time-Average Measurement of Velocity, Density, Temperature, and Turbulence Using Molecular Rayleigh Scattering

Measurement of time-averaged velocity, density, temperature, and turbulence in gas flows using a nonintrusive, point-wise measurement technique based on molecular Rayleigh scattering is discussed. Subsonic and supersonic flows in a 25.4-mm diameter free jet facility were studied. The developed instrumentation utilizes a Fabry-Perot interferometer to spectrally resolve molecularly scattered light from a laser beam passed through a gas flow. The spectrum of the scattered light contains information about velocity, density, and temperature of the gas. The technique uses a slow scan, low noise 16-bit depth CCD camera to record images of the fringes formed by Rayleigh scattered light passing through the interferometer. A kinetic theory model of the Rayleigh scattered light is used in a nonlinear least squares fitting routine to estimate the unknown parameters from the fringe images. The ability to extract turbulence information from the fringe image data proved to be a challenge since the fringe is broadened by not only turbulence, but also thermal fluctuations and aperture effects from collecting light over a range of scattering angles. Figure 1 illustrates broadening of a Rayleigh spectrum typical of flow conditions observed in this work due to aperture effects and turbulence for a scattering angle, chi(sub s), of 90 degrees, f/3.67 collection optics, mean flow velocity, u(sub k), of 300 m/s, and turbulent velocity fluctuations, sigma (sub uk), of 55 m/s. The greatest difficulty in processing the image data was decoupling the thermal and turbulence broadening in the spectrum. To aid in this endeavor, it was necessary to seed the ambient air with smoke and dust particulates; taking advantage of the turbulence broadening in the Mie scattering component of the spectrum of the collected light (not shown in the figure). The primary jet flow was not seeded due to the difficulty of the task. For measurement points lacking particles, velocity, density, and temperature information could reliably be recovered, however the turbulence estimates contained significant uncertainty. Resulting flow parameter estimates are presented for surveys of Mach 0.6, 0.95, and 1.4 jet flows. Velocity, density, and temperature were determined with accuracies of 5 m/s, 1.5%, and 1%, respectively, in flows with no particles present, and with accuracies of 5 m/s, 1-4%, and 2% in flows with particles. Comparison with hotwire data for the Mach 0.6 condition demonstrated turbulence estimates with accuracies of about 5 m/s outside the jet core where Mie scattering from dust/smoke particulates aided in the estimation of turbulence. Turbulence estimates could not be recovered with any significant accuracy for measurement points where no particles were present.

Mielke, Amy F.↗
NASA NTRS1993

Gamma-ray observations of the Galactic center - Removing the Galactic ridge contribution

Spectral measurements of the emission from the disk of the Galaxy from keV to GeV energies are combined. It is found that this emission has a similar spatial distribution at all energies: a longitude extent of about +/-40 deg and a latitude extent of about less than 5 deg. The emission over most of the energy range is dominated by cosmic-ray electrons and protons interacting with interstellar matter. The ridge spectrum is estimated to be near 100 keV using observations by HEAO A-4 from 1977 to 1979. To determine the emission from point sources in the region the diffuse component is substracted from Galactic center observations made by wide-field gamma-ray instruments over the past 20 years. The Galactic ridge accounts for between one-third and one-half of the observed flux for most of the measurements. Substracting the diffuse emission and GRS 1758-258 emission from the HEXAGONE observations on May 22 gives a spectrum that is dominated by lines from positron annihilation.

Gehrels, Neil↗
NASA NTRS1990

Free-field propagation of high intensity noise

Observed spectral data from supersonic jet aircraft are known to contain much more high frequency energy than can be explained by linear acoustic propagation theory. It is believed that the high frequency energy is an effect of nonlinear distortion due to the extremely high acoustic levels generated by the jet engines. The objective, to measure acoustic waveform distortion for spherically diverging high intensity noise, was reached by using an electropneumatic acoustic source capable of generating sound pressure levels in the range of 140 to 160 decibels (re 20 micro Pa). The noise spectrum was shaped to represent the spectra generated by jet engines. Two microphones were used to capture the acoustic pressure waveform at different points along the propagation path in order to provide a direct measure of the waveform distortion as well as spectral distortion. A secondary objective was to determine that the observed distortion is an acoustic effect. To do this an existing computer prediction code that deals with nonlinear acoustic propagation was used on data representative of the measured data. The results clearly demonstrate that high intensity jet noise does shift the energy in the spectrum to the higher frequencies along the propagation path. In addition, the data from the computer model are in good agreement with the measurements, thus demonstrating that the waveform distortion can be accounted for with nonlinear acoustic theory.

Welz, Joseph P.↗
DOE OSTI2022

Delensing the CMB with the cosmic infrared background: the impact of foregrounds

ABSTRACT The most promising avenue for detecting primordial gravitational waves from cosmic inflation is through measurements of degree-scale cosmic microwave background (CMB) B-mode polarization. This approach must face the challenge posed by gravitational lensing of the CMB, which obscures the signal of interest. Fortunately, the lensing effects can be partially removed by combining high-resolution E-mode measurements with an estimate of the projected matter distribution. For near-future experiments, the best estimate of the latter will arise from co-adding internal reconstructions (derived from the CMB itself) with external tracers such as the cosmic infrared background (CIB). In this work, we characterize how foregrounds impact the delensing procedure when CIB intensity, I, is used as the matter tracer. We find that higher point functions of the CIB and Galactic dust such as 〈BEI〉c and 〈EIEI〉c can, in principle, bias the power spectrum of delensed B-modes. To quantify these, we first estimate the dust residuals in currently available CIB maps and upcoming, foreground-cleaned Simons Observatory CMB data. Then, using non-Gaussian simulations of Galactic dust – extrapolated to the relevant frequencies, assuming the spectral index of polarized dust emission to be fixed at the value determined by Planck – we show that the bias to any primordial signal is small compared to statistical errors for ground-based experiments, but might be significant for space-based experiments probing very large angular scales. However, mitigation techniques based on multifrequency cleaning appear to be very effective. We also show, by means of an analytical model, that the bias arising from the higher point functions of the CIB itself ought to be negligible.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Molecular structure retrieval directly from laboratory-frame photoelectron spectra in laser-induced electron diffraction

Ubiquitous to most molecular scattering methods is the challenge to retrieve bond distance and angle from the scattering signals since this requires convergence of pattern matching algorithms or fitting methods. This problem is typically exacerbated when imaging larger molecules or for dynamic systems with little a priori knowledge. Here, we employ laser-induced electron diffraction (LIED) which is a powerful means to determine the precise atomic configuration of an isolated gas-phase molecule with picometre spatial and attosecond temporal precision. We introduce a simple molecular retrieval method, which is based only on the identification of critical points in the oscillating molecular interference scattering signal that is extracted directly from the laboratory-frame photoelectron spectrum. The method is compared with a Fourier-based retrieval method, and we show that both methods correctly retrieve the asymmetrically stretched and bent field-dressed configuration of the asymmetric top molecule carbonyl sulfide (OCS), which is confirmed by our quantum-classical calculations.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
NASA NTRS1974

Electron detachment in low-energy collisions of H/-/ and D/-/ with He

The applicability of the complex-potential theory to H(-)-He collisions is investigated. Measurements are conducted of the elastic differential cross section for H(-)-He collisions, taking into account energies in the range from 5 to 120 eV. A preliminary determination is made of the energy spectrum of detached electrons. The results are interpreted in terms of the complex-potential theory. The crossing point is determined together with the general shape of the HeH(-) potential curve.

Lam, S. K.↗
NASA NTRS1981

HR 4511 - A probable Cepheid with a supergiant-like hot companion

IUE observations have shown HR 4511 to have an early B-type companion with a strong stellar wind. Fitting the energy distribution of the system from far-UV to middle-IR yields a difference of about 3.2 mag at the V passband. Since HR 4511 is in the small cluster Stock 14 and has M(V) = -7.8, M(V) for the secondary is about -4.6, which is only slightly more luminous than the known BO.5 III and B1 stars at the turnoff point. This implies an inconsistency between the deduced luminosity of the secondary and the nature of its UV spectrum, which mimics stars of considerably greater luminosity. It is suggested that the secondary may have been observed in a brief stage between core and shell H burning.

Parsons, S. B.↗
NASA NTRS1981

Measurement of acoustic shielding by a turbulent jet

The acoustic shielding properties of a turbulent jet have been investigated experimentally. The experimental arrangement consisted of an acoustic point source and a turbulent shielding jet. The source and jet parameters investigated include the source frequency, source spectrum, jet velocity, jet medium and the lateral and longitudinal source positions with respect to the shielding jet. It is found that the acoustic shielding of jet flow is power conserving and the acoustic refraction, diffraction and reflection are the main mechanisms controlling the measured noise field. The balance between refraction and diffraction gives rise to a saturation of shielding with frequency in the shadow zone of the source. Comparison with predicted shielding from an idealized cylindrical non-decaying jet model indicates that the spreading and decay of the jet flow are important. Comparisons between the present data trends and those reported for jet-by-jet shielding suggest that the major effects observed in the latter are acoustical.

Yu, J. C.↗
NASA NTRS1982

Acoustic modal analysis of a full-scale annular combustor

An acoustic modal decomposition of the measured pressure field in a full scale annular combustor installed in a ducted test rig is described. The modal analysis, utilizing a least squares optimization routine, is facilitated by the assumption of randomly occurring pressure disturbances which generate equal amplitude clockwise and counter-clockwise pressure waves, and the assumption of statistical independence between modes. These assumptions are fully justified by the measured cross spectral phases between the various measurement points. The resultant modal decomposition indicates that higher order modes compose the dominant portion of the combustor pressure spectrum in the range of frequencies of interest in core noise studies. A second major finding is that, over the frequency range of interest, each individual mode which is present exists in virtual isolation over significant portions of the spectrum. Finally, a comparison between the present results and a limited amount of data obtained in an operating turbofan engine with the same combustor is made. The comparison is sufficiently favorable to warrant the conclusion that the structure of the combustor pressure field is preserved between the component facility and the engine.

Karchmer, A. M.↗