Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “plastic work”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Unraveling kinking: A plasticity enhancing failure mode in high strength nano metallic laminates

Kinking is an important and plasticity-enhancing deformation/failure mode in numerous mechanically anisotropic materials including high-strength nano metallic laminates (NMLs). However, our current limited understanding of the mechanics of kinking and its dependence on microstructural attributes is insufficient for thoroughly comprehending and eventually being able to control failure behaviors of materials. In this study, we investigate kinking dependencies on microstructural attributes in NMLs via in situ micropillar compression, multiscale microstructure characterization, dislocation dynamic simulations, and crystal plasticity modeling. Additionally, by examining several NML systems (Cu/Fe, Ag/Fe, Al-4Mg/Fe), we demonstrate that the development of internal stresses during loading activates local layer-parallel glide triggering kinking in NMLs. Furthermore, this work reveals the effect of key microstructural features including layer thickness, layer waviness, interface barrier strength, and work hardening capacity on kink band formation in NMLs. More broadly, our efforts represent a generically applicable approach for probing large-strain deformation behavior of complex materials via synergetic modeling and experimental efforts.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Heliotrope: A Solar Powered Hot Air Balloon Flight System

What it is: A roughly spherical balloon constructed from light duty painter's plastic (0.31 mil high density polyethylene) and darkened with air float charcoal powder. Balloons typically range from 12-40 ft across depending on mission needs. How it works: Sunlight shines on the balloon, heating the air inside. The density difference due to the hot air in the balloon is sufficient to lift it up to 80,000 ft in the air

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Mechanics of the Ring Tension Test (RTT): A Finite Element-based Investigation

The ring tension test (RTT) is an experimental method for determining mechanical behavior in a material’s circumferential or hoop direction. It is a crucial test for testing anisotropic materials with tube geometry, such as nuclear fuel cladding or irradiated pipes. Several RTT configurations exist, each with their own advantages and disadvantages. However, this test is significantly more complex than traditional tensile testing and can be especially sensitive to small differences and inconsistencies in the test setup and geometry, ultimately affecting the derived mechanical properties. Previous research has focused on method development, and little work has been done on understanding the subtle differences between an ideal test and experiments, specifically when the tests are performed on highly irradiated materials in hot cells. In this work, a finite element-based investigation of the RTT is conducted. Two promising test configurations are investigated, comparing their ability to determine accurate material strengths through plastic deformation. Several non-ideal conditions and uncontrollable effects which are likely to occur during experimental testing such as machining tolerances, variations of specimen geometry from nominal dimensions, rotation of specimens and fixturing, and other test setup discrepancies are studied. The sensitivity of measured strengths to these conditions is presented. A mechanics-based approach to describing and correcting raw data to determine actual strengths is also included for one of the configurations, resulting in a robust correction method with highly accurate material strength measurements. Based on these analyses, the hemicylindrical mandrel configuration is recommended with a gauge region oriented at a 45° angle.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2022

Plastic waste upgrade to olefins via mild slurry microwave pyrolysis over solid acids

Chemical upcycling technologies are emerging as the most viable to combat plastic waste accumulation. Among them, catalytic pyrolysis is very promising as it is feedstock agnostic. However, the high energy demand associated with pyrolysis can lead to significant carbon dioxide production. In this work, we demonstrate that coupling microwave heating with suitable solid acid promoters in a slurry reactor coupled with a distillation unit can overcome the energy-related challenge of conventional pyrolysis, by operating at modest temperatures (350–375 °C), enhancing transport, and furnishing high yields of olefins (~88 %) in seconds, with medium-sized olefins (>75 %) composing a significant fraction. Reduced thermal gradients minimize coke formation, further improving the performance. Techno-economic analysis and life cycle assessment indicate the potential of the technology.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

On plasticity-enhanced interfacial toughness in bonded joints

Here, the performance and reliability of many structures and components depend on the integrity of interfaces between dissimilar materials. Interfacial toughness Γ is the key material parameter that characterizes resistance to interfacial crack growth, and Γ is known to depend on many factors including temperature. For example, previous work showed that the toughness of an epoxy/aluminum interface decreased 40 % as the test temperature was increased from -60 °C to room temperature (RT). Interfacial integrity at elevated temperatures is of considerable practical importance. Recent measurements show that instead of continuing to decrease with increasing temperature, Γ increases when test temperature is above RT. Cohesive zone finite element calculations of an adhesively bonded, asymmetric double cantilever beam specimen of the type used to measure Γ suggest that this increase in toughness may be a result of R-curve behavior generated by plasticity-enhanced toughening during stable subcritical crack growth with interfacial toughness defined as the critical steady-state limit value. In these calculations, which used an elastic-perfectly plastic epoxy model with a temperature-dependent yield strength, the plasticity-enhanced increase in Γ above its intrinsic value Γ o depended on the ratio of interfacial strength σ* to the yield strength σyb of the bond material. There is a nonlinear relationship between Γ/Γ o and σ*/σ yb with the value Γ/Γ o increasing rapidly above a threshold value of σ*/σ yb . The predicted increase in toughness can be significant. For example, there is nearly a factor of two predicted increase in Γ/Γ o during micrometer-scale crack-growth when σ*/σ yb = 2 (a reasonable choice for σ*/σ yb ). Furthermore, contrary to other reported results, plasticity-enhanced toughening can occur prior to crack advance as the cohesive zone forms and the peak stress at the tip of the original crack tip translates to the tip of the fully formed cohesive zone. These results suggest that plasticity-enhanced toughening should be considered when modeling interfaces at elevated temperatures.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Economic evaluation of infrastructures for thermochemical upcycling of post-consumer plastic waste

Thermochemical technologies, such as pyrolysis, offer a potentially scalable pathway for upcycling diverse types of plastic waste (PW) into value-added chemicals. However, deploying these technologies in waste management infrastructures is not straightforward because such systems involve a wide range of interdependent stakeholders, processing facilities, and products. In this work, we present a holistic optimization framework that integrates value-chain analysis, techno-economic analysis, and life-cycle analysis for investigating the economic viability and environmental benefits of upcycling infrastructures that collect, sort, clean, and process post-consumer PW for producing virgin polymer resins. The framework is applied to a case study in the upper Midwest region of the US. Our analysis reveals that the infrastructures are economically viable and could activate a regional circular economy that generates over 1 billion USD in annual profit. Moreover, our analysis reveals that this economy can reduce the carbon footprint of PW incineration by half. Our framework also determines the inherent values of post-consumer PW and of derived products such as plastic bales and pyrolysis oil; we find that, in these infrastructures, PW becomes a highly valuable feedstock with a market value of 500 USD per tonne. Here, we discuss how this market value can generate incentives that foster more effective waste pre-sorting practices by consumers that can help bypass material recycling facilities and increase total system profit.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Extrusion‐Spheronization of Energetic Materials

The prevailing method to produce plastic‐bonded explosive (PBX) molding powder, or “prills”, is a complex, multiphase, and bespoke process that was developed by the high explosives (HEs) manufacturing industry several decades ago. This work demonstrates the utility of a simpler, widely‐used mechanical process—extrusion‐spheronization—to produce PBX prills. We begin by detailing precautions taken to enable safe remote operation of extrusion‐spheronization equipment with HE. We then perform a study investigating the effect of lacquer solvent composition on the particle packing, pressed density, and compressive strength properties of a 95 wt.% TATB/5 wt.% polymer binder formulation akin to PBX 9502. It was found that increased composition of low vapor pressure solvents caused prolonged retention of the solvent, resulting in tackier materials that would agglomerate and form larger prills. The larger prills also led to lower poured density and tapped density of HE prills and compressive strength of pressed PBX articles. The samples prepared with a 75% propyl acetate/25% butyl acetate lacquer solvent composition exhibited the highest compressive strength. However, it is believed that the prill packing and compressive strength properties are primarily driven by the prill size rather than the chemical composition of the lacquer itself. Extrusion‐spheronization remains a promising method to reliably and repeatably produce HE prills that is less sensitive to feedstock or process variation than traditional methods.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Strong and recyclable bio-derived poly(ester amide) hot-melt adhesive

Bio-based adhesives offer inherent advantages over conventional petrochemical-derived systems, including renewable sourcing, reduced environmental impact and potential degradability. However, most bio-based adhesives suffer from poor adhesion strength, limited substrate compatibility and a lack of chemical recyclability. Here, in this work, we present a bio-derived multiblock poly(ester amide) adhesive that leverages microphase segregation between different segments to reconcile mechanical robustness with strong interfacial bonding. Notably, this multiblock architecture is accessed through a one-pot, selective acceptorless dehydrogenative polymerization, obviating the need for multistep synthesis. The materials exhibit excellent adhesion across a range of substrates including metals, glass and wet wood surpassing commercial benchmarks, while also demonstrating thermal stability, tunable mechanical properties and closed-loop chemical recyclability even in the presence of other commodity plastics. Furthermore, the adhesive strength of these materials could be tuned for various potential applications through control over the chemical composition of the polymer. By integrating renewable feedstocks, high-performance functionality and efficient chemical circularity within a single platform, this work provides a viable pathway toward more sustainable adhesive technologies and contributes to advancing circular materials manufacturing.

09 BIOMASS FUELS↗
DOE OSTI2023

Temporally continuous thermofluidic–thermomechanical modeling framework for metal additive manufacturing

Additive manufacturing (AM) is known to generate large magnitudes of residual stresses (RS) within builds due to steep and localized thermal gradients. In the current state of commercial AM technology, manufacturers generally perform heat treatments in effort to reduce the generated RS and its detrimental effects on part distortion and in-service failure. Computational models that effectively simulate the deposition process can provide valuable insights to improve RS distributions. Accordingly, it is common to employ Computational fluid dynamics (CFD) models or finite element (FE) models. While CFD can predict geometric and thermal-fluid behavior, it cannot predict the structural response (e.g., stress–strain) behavior. On the other hand, an FE model can predict mechanical behavior, but it lacks the ability to predict geometric and fluid behavior. Thus, an effectively integrated thermofluidic–thermomechanical modeling framework that exploits the benefits of both techniques while avoiding their respective limitations can offer valuable predictive capability for AM processes. In contrast to previously published efforts, the work herein describes a one-way coupled CFD-FEA framework that abandons major simplifying assumptions, such as geometric steady-state conditions, the absence of material plasticity, and the lack of detailed RS evolution/accumulation during deposition, as well as insufficient validation of results. Here, the presented framework is demonstrated for a directed energy deposition (DED) process, and experiments are performed to validate the predicted geometry and RS profile. Both single- and double-layer stainless steel 316L builds are considered. Geometric data is acquired via 3D optical surface scans and X-ray micro-computed tomography, and residual stress is measured using neutron diffraction (ND). Comparisons between the simulations and measurements reveal that the described CFD-FEA framework is effective in capturing the coupled thermomechanical and thermofluidic behaviors of the DED process. The methodology presented is extensible to other metal AM processes, including power bed fusion and wire-feed-based AM.

42 ENGINEERING↗
DOE OSTI2026

Dynamic crushing of metal lattice metamaterials: Shock mode diagrams and transition to topology-independent compaction regime

Additively manufactured lattice metamaterials offer design versatility in strength and energy absorption and provide an additional degree of freedom through the selection of the lattice topology. Under quasistatic loading, the unit cell structure can strongly affect the stiffness, yield, and post-yield behavior, but whether and to what degree the effect of lattice topology persists into dynamic loading scenarios, up to the compaction shock regime, has not been established. LLNL’ s ALE3D hydrocode was used to perform a computational investigation of dynamic loading in multiple lattice types, including the gyroid, octet, Schwarz D, and rhombic dodecahedron, under impact velocities from 0.25 to 2.25 km/s. Shock Hugoniots for each lattice topology are generated and compared, suggesting that above a critical velocity, distinctions between architectures may not persevere and compacted lattices behave similarly. Here, to investigate the transition between topology-dependent quasistatic compression and the topology-independent regime above the critical velocity, a one-dimensional elastic-linear hardening plasticity-densified solid (E-LHP-DS) shock model for lattice materials was developed that relies upon confined compression to link the quasistatic and shock mechanics. Unlike similar works, the model does not assume rigid behavior prior to yield or locking behavior at densification, allowing a richer exploration of lattice mechanics. With only six parameters, the analytical model simultaneously fit quasistatic confined compression simulations for relative densities 0.1 $≤ \bar{ρ} ≤$ 0.9 and predicted dynamic compaction behavior to traverse several distinct shock modes, each defined by a critical impact speed (equivalently, critical stresses). Comparing the numerical results to the one-dimensional E-LHP-DS shock model predictions suggests that the topology-independence under strong shocks is linked to the onset of densification, which can be predicted based on quasistatic confined compression results.

Cellular material↗
DOE OSTI2021

A novel physics-based and data-supported microstructure model for part-scale simulation of laser powder bed fusion of Ti-6Al-4V

The elasto-plastic material behavior, material strength and failure modes of metals fabricated by additive manufacturing technologies are significantly determined by the underlying process-specific microstructure evolution. In this work a novel physics-based and data-supported phenomenological microstructure model for Ti-6Al-4V is proposed that is suitable for the part-scale simulation of laser powder bed fusion processes. The model predicts spatially homogenized phase fractions of the most relevant microstructural species, namely the stable β-phase, the stable α s -phase as well as the metastable Martensite α m -phase, in a physically consistent manner. In particular, the modeled microstructure evolution, in form of diffusion-based and non-diffusional transformations, is a pure consequence of energy and mobility competitions among the different species, without the need for heuristic transformation criteria as often applied in existing models. The mathematically consistent formulation of the evolution equations in rate form renders the model suitable for the practically relevant scenario of temperature- or time-dependent diffusion coefficients, arbitrary temperature profiles, and multiple coexisting phases. Due to its physically motivated foundation, the proposed model requires only a minimal number of free parameters, which are determined in an inverse identification process considering a broad experimental data basis in form of time-temperature transformation diagrams. Subsequently, the predictive ability of the model is demonstrated by means of continuous cooling transformation diagrams, showing that experimentally observed characteristics such as critical cooling rates emerge naturally from the proposed microstructure model, instead of being enforced as heuristic transformation criteria. Eventually, the proposed model is exploited to predict the microstructure evolution for a realistic selective laser melting application scenario and for the cooling/quenching process of a Ti-6Al-4V cube of practically relevant size. Numerical results confirm experimental observations that Martensite is the dominating microstructure species in regimes of high cooling rates, e.g., due to highly localized heat sources or in near-surface domains, while a proper manipulation of the temperature field, e.g., by preheating the base-plate in selective laser melting, can suppress the formation of this metastable phase.

Inverse parameter identification↗
DOE OSTI2022

TEA and LCA Assessments of H2 Production from Coal, Coal/Biomass, and Biomass

This presentation was made at the "Gasification Technology Status and Pathways for Net-Zero Carbon Economy Workshop" held on November 30, 2022. The presentation primarily focuses on TEA/LCA results that NETL has developed for coal gasification w/ & w/o CCS as well as net-zero greenhouse gas coal/biomass gasification. Full reporting of these cases is publicly available in the NETL report titled "Comparison of Commercial, State-of-the-Art, Fossil-Based Hydrogen Production Technologies," April 2022. Additionally, the presentation describes current NETL work in support of the U.S. Department of Energy (DOE) Office of Fossil Energy and Carbon Management (FECM) Gasification Program in the areas of TEA/LCA/Markets analysis of biomass/MSW/waste plastics gasification to achieve cost reductions for net-zero H2 production.

Lewis, Eric↗
DOE OSTI2022

Polyethylene upcycling to fuels: Narrowing the carbon number distribution in n-alkanes by tandem hydropyrolysis/hydrocracking

The extensive use of plastics in modern life has resulted in a global waste crisis to the environment. Polyethylene (PE) is one of the most popular and hardest plastics to recycle because of its strong C(sp 3 )-C(sp 3 ) bonds. In this study, a tandem conversion process, i.e., hydropyrolysis and subsequent vapor-phase hydrocracking of primary intermediates (C n>5 alkenes and long-chain alkanes), was conducted via a two-step pressurized flow-through fixed-bed reactor over a CoAl 2 O 4 spinel-derived catalyst. The product distribution could be flexibly tuned by regulating operating parameters in the cascade fixed-bed reactor and Co/Al molar ratio in CoAl 2 O 4 spinel catalysts. Under optimal reaction conditions (0.2 MPa H 2 , 550 °C for hydropyrolysis in the 1st reactor, 300–325 °C for hydrocracking in the 2nd reactor, 20 s -1 of gas hourly space velocity), the maximum single-pass yields of gasoline (C 5 -C 12 ) and jet-fuel (C 8 -C 16 ) range n-alkanes reached 86.0 wt% and 68.1 wt%, respectively. The CoAl 2 O 4 spinel catalysts also gained high activity in degrading realistic post-consumer plastics such as linear low-, low-, and high-density PE, and a ~ 73.1 wt% gasoline yield and a ~ 54.7 wt% C 8 -C 16 yield were retained even after 3 cycles in-situ regeneration of deactivated CoAl 2 O 4 catalysts. This work provides an efficient and tunable approach to upcycle PE wastes into liquid fuels with an ideal carbon length.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Liquid Fed Pyrolysis of Polyethylene Films: Environmental and Economic Assessments of Co-located and Remotely-Located U.S. Facilities

Polyethylene (PE) films are one of the highest production volume plastic products, but they have very low recycling rates. A novel liquid fed pyrolysis process (LFP) is an advanced recycling technology that can be applied to waste PE films. In this work, two environmental and six economic metrics were evaluated for the LFP process under different scenarios with a baseline production capacity of 8,400 Metric Tons (MT) of pyrolysis products/year. The studied scenarios considered process improvement such as heat integration, changing the final product yields, and location of the LFP process facility (i.e., co-located at a petrochemical facility or located remotely). Results show that producing refined pyrolysis wax in remote areas is the most environmentally favorable and profitable scenario. The LFP process co-located at a petrochemical facility and selling only liquid and gaseous pyrolysis products to the facility would require a capacity of >18,000 MT/year to be economically feasible. Heat integration led to greenhouse gas emission savings of at least 14%, 19%, and 32% for the pyrolysis oil, gas, and wax products, respectively. Fianlly, the LFP process in remote and less populated locations producing a high yield of refined wax may be a feasible solution for increasing recycling rates of PE films.

Advanced recycling↗
DOE OSTI2023

Microwave-assisted depolymerization of PET over heterogeneous catalysts

The accumulation of plastic waste in the environment is rising and poses a significant environmental and health threat. Polyethylene terephthalate (PET), used mainly in single-use plastic bottles, accounts for a substantial fraction of this waste. The currently employed recycling strategies are inadequate to deal with the global plastic waste problem. PET glycolysis is a promising depolymerization method but has mainly been conducted using homogeneous catalysts; developing active and sustainable catalysts, and more energy-efficient processes remain challenges. Here, in this work, we implement microwave heating in PET glycolysis and identify ZnO as an excellent heterogeneous catalyst. We demonstrate the influence of ZnO's particle size and facet and hydrogen bonding on its activity. Finally, we demonstrate excellent performance for real-world post-consumer PET waste deconstruction with rapid depolymerization into bis(2-hydroxyethyl) terephthalate (BHET), achieving > 95% yields in less than 10 min. Cradle-to-gate life cycle assessment also indicates that BHET produced by ZnO-catalyzed glycolysis has lower global warming potential than the petrochemical-based production and homogeneously-catalyzed glycolysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Training Spiking Neural Networks Using Combined Learning Approaches

Spiking neural networks (SNNs), the class of neural networks used in neuromorphic computing, are difficult to train using traditional back-propagation techniques. Spike timingdependent plasticity (STDP) is a biologically inspired learning mechanism that can be used to train SNNs. Evolutionary algorithms have also been demonstrated as a method for training SNNs. In this work, we explore the relationship between these two training methodologies. We evaluate STDP and evolutionary optimization as standalone methods for training networks, and also evaluate a combined approach where STDP weight updates are applied within an evolutionary algorithm. We also apply Bayesian hyperparameter optimization as a meta learner for each of the algorithms. We find that STDP by itself is not an ideal learning rule for randomly connected networks, while the inclusion of STDP within an evolutionary algorithm leads to similar performance, with a few interesting differences. This study suggests future work in understanding the relationship between network topology and learning rules.

Elbrecht, Daniel↗
DOE OSTI2023

Overdriven Shocks: Recapturing a Lost Capability

Wallace’s theory for overdriven shocks in solids provides a theoretical framework for the strength of materials in the strong shock regime at strain rates unobtainable by current experimental means. Using irreversible thermodynamics, this theory incorporates heat and plastic flow as dissipative mechanisms under shock conditions allowing for the calculation of properties such as deviatoric stresses, plastic strains, and plastic strain rates. Though the theory is over four decades old, it has been used to calculate the strength behavior of only a small handful of metals. In this work, we have recaptured the ability to conduct this analysis, and two crucial aspects of the overdriven theory will be discussed: 1) the modeling assumptions that comprise this theoretical approach and 2) what information is needed to calculate the strength behavior for new materials.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Preprocessing of municipal solid waste towards thermal insulating material

Municipal solid waste (MSW) is one of the significant challenges in today’s world. A continuous surge in population, increasing living standards, and rapid urbanization are generating an enormous quantity of MSW. For example, the Environmental Protection Agency (EPA) reported that the total generation of MSW in the United States in 2018 was 292.4 million tons. Improper management of this MSW often leads to the release of greenhouse gases, emission of particulate matters, and formation of dioxins, which all ultimately contributes to climate change. Recycling these wastes via landfills with gas recovery and/or energy and material production via thermal and chemical conversions could be viable options to manage these challenges. Depending on the inherent chemical and structural properties of unrecycled wastes, the carbon structures can be tailored for processing and reuse in manufacturing of structural composites, building materials such as insulation, carbon dense reactant materials such as activated carbon, and so on. According to the EPA’s estimation, MSW in the United States is approximately 23% paper and paperboard, 12% plastics, 6% wood and 6% is textiles. Thus, this research focused on the feasibility of using the MSW as insulation material for the construction sector. The goal of this work was to determine the range of particle sizes, consolidation ratios, and component blends that can achieve insulation R-values within at least 70% that of traditional blown cellulose fiber. To achieve this goal, we designed the testing matrix based on five different component blends, three different particle sizes, and three different compaction level. An American Society for Testing and Materials (ASTM) method (C-739) was used to measure the R-value of the insulation material. Results showed that, adding more paper component in addition to smaller particle size and loose compaction made the insulation similar to the traditional blown cellulose fiber insulation as the R-value was within a range of 2.5-3.0 per inch.

42 ENGINEERING↗