Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “phase transformations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

200-fold increase in dynamic strength of platinum at 430 GPa without a phase transformation

Here, the high-pressure strength of solid platinum is studied at the National Ignition Facility via Rayleigh-Taylor ripple growth under ramp compression. Laser-driven experiments reached pressures up to 430 GPa, collecting velocimetry and radiography data. Despite no phase transformation, the observed ripple growth aligns with hydrodynamic simulations using an amplified Steinberg-Guinan model, resulting in a 200-fold increase in strength. Molecular dynamics simulations of platinum ramp compression yield similar von Mises stress at comparable high pressure and high strain rate conditions. These findings represent the highest-pressure strength measurements ever achieved for platinum and offer critical insight into its significant strengthening behavior under high pressure and strain rate conditions.

Righi, Gaia [Lawrence Livermore National Laborator↗

Nondissipative Martensitic Phase Transformation after Multimillion Superelastic Cycles

Superelastic alloys used for stents, biomedical implants, and solid-state cooling devices rely on their reversible stress-induced martensitic transformations. These applications require the alloy to sustain high deformability over millions of cycles without failure. Here, we report an alloy capable of enduring 10 × 10 7 tensile stress-induced phase transformations while still exhibiting over 2% recoverable elastic strains. After millions of cycles, the alloy is highly reversible with zero stress hysteresis. We show that the major martensite variant is reversible even after multimillions of cycles under tensile loadings with a highly coherent $(1\bar{1}0)_A$ interface. Finally, this discovery provides new insights into martensitic transformation, and may guide the development of superelastic alloys for multimillion cycling applications.

36 MATERIALS SCIENCE↗

Nanoscale conductive niobium oxides made through low temperature phase transformation for electrocatalyst support

We report an effective approach to synthesize nanoscale Nb2O5 coated on carbon nanotubes (CNTs) and transform it at low temperatures to the conductive form of NbO2. The latter, when used as a Pt electrocatalyst support, shows significant enhancement in catalyst activity and durability in the oxygen reduction reaction (ORR). Direct phase transformation of Nb2O5 to NbO2 often requires temperatures above 1000 degrees C. Here we show that this can be achieved at a much lower temperature (e.g. 700 degrees C) if the niobium oxide is first activated with carbon. Low temperature processing allows retaining nanostructures of the oxide without sintering, keeping its high surface areas needed for being a catalyst support. We further show that Pt supported on the conductive oxides on CNTs has two times higher mass activity for the ORR than on bare CNTs. The electrochemical stability of Pt was also outstanding, with only ca. 5% loss in electrochemical surface areas and insignificant reduction in half-wave potential in ORR after 5000 potential cycles.

Huang, K↗

Diffusional and Partitionless Ferrite‐to‐Austenite Phase Transformations during Intercritical Annealing of Medium‐Mn Steels

Experimental research on intercritical annealing of a cold‐rolled Fe–7Mn steel with ultralow carbon concentration is presented, providing insight into the efficacy of generating Mn‐enriched austenite during relatively short (≈1000 s) heat treatments compared with batch annealing, as well as the phase transformation mechanisms that can occur during intercritical annealing. It is shown through both bulk characterization and electron microscopy in conjunction with energy‐dispersive X‐ray spectroscopy that Mn partitioning to austenite occurs via diffusional, partitioning growth of austenite during these shorter treatments and that the intercritical temperature influences the level of Mn enrichment in austenite. Evidence of massive (partitionless) and diffusional (partitioning) transformations of ferrite to austenite occurring simultaneously in a single sample are also shown along with a thermodynamic rationale for this occurrence, which is suggested to be related to residual Mn‐banding that develops during solidification.

Mueller, Josh J.↗

Exceptional Resilience of Small-Scale Au 30 Cu 25 Zn 45 under Cyclic Stress-Induced Phase Transformation

Shape memory alloys that produce and recover from large deformation driven by martensitic transformation are widely exploited in biomedical devices and microactuators. Generally their actuation work degrades significantly within first a few cycles and is reduced at smaller dimensions. Further, alloys exhibiting unprecedented reversibility have relatively small superelastic strain, 0.7%. These raise the questions of whether high reversibility is necessarily accompanied by small work and strain and whether high work and strain is necessarily diminished at small scale. In this paper we conclusively demonstrate that these are not true by showing that Au 30 Cu 25 Zn 45 pillars exhibit 12 MJ m –3 work and 3.5% superelastic strain even after 100 000 phase transformation cycles. Our findings confirm that the lattice compatibility dominates the mechanical behavior of phase-changing materials at nano to micron scales and points a way for smart microactuators design having the mutual benefits of high actuation work and long lifetime.

36 MATERIALS SCIENCE↗

Pressure-induced phase transformations in cubic Gd[subscript 2]O[subscript 3]

High-pressure transformation and compression behavior of Gd{sub 2}O{sub 3} were investigated using synchrotron radiation x-ray diffraction in a diamond anvil cell up to 44 GPa at room temperature. The structural transformation from a cubic to a monoclinic phase occurred during the sample precompression process. Phase transitions from both the cubic and the monoclinic polymorphs to a hexagonal structure were observed. The hexagonal phase was stable up to the highest pressure in this study and was not quenchable and transformed to a monoclinic phase after pressure release. The bulk moduli of Gd{sub 2}O{sub 3} for the cubic, monoclinic, and hexagonal phases were obtained by fitting the compression data to the Birch-Murnaghan equation of state. Moreover, an anomaly of the hexagonal type Gd{sub 2}O{sub 3} was observed.

43 PARTICLE ACCELERATORS↗

Combinatorial Exploration and Mapping of Phase Transformation in a Ni–Ti–Co Thin Film Library

Combinatorial synthesis and high-throughput characterization of a Ni–Ti–Co thin film materials library are reported for exploration of reversible martensitic transformation. The library was prepared by magnetron co-sputtering, annealed in vacuum at 500 °C without atmospheric exposure, and evaluated for shape memory behavior as an indicator of transformation. Composition, structure, and transformation behavior of the 177 pads in the library were characterized using high-throughput wavelength dispersive spectroscopy (WDS), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), and four-point probe temperature-dependent resistance (R(T)) measurements. A new, expanded composition space having phase transformation with low thermal hysteresis and Co > 10 at. % is found. Unsupervised machine learning methods of hierarchical clustering were employed to streamline data processing of the large XRD and XPS data sets. Through cluster analysis of XRD data, we identified and mapped the constituent structural phases. Finally, composition–structure–property maps for the ternary system are made to correlate the functional properties to the local microstructure and composition of the Ni–Ti–Co thin film library.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Quantification of High‐Temperature Transition Al 2 O 3 and Their Phase Transformations**

Abstract High‐temperature treatment of γ‐Al 2 O 3 can lead to a series of polymorphic transformations, including the formation of δ‐Al 2 O 3 and θ‐Al 2 O 3 . Quantification of the microstructure in the range where δ‐ and θ‐Al 2 O 3 are formed represents a formidable challenge, as both phases accommodate a high degree of structural disorder. In this work, we explore the use of an XRD recursive‐stacking formalism for the quantification of high‐temperature transition aluminas. We formulate the recursive‐stacking methodology for modelling of disorder in δ‐Al 2 O 3 and twinning in θ‐Al 2 O 3 and show that explicitly accounting for the disorder is necessary to reliably model the XRD patterns of high‐temperature transition alumina. We also use the recursive stacking approach to study phase transformation during high‐temperature (1050 °C) treatment. We show that the two different intergrowth modes of δ‐Al 2 O 3 have different transformation characteristics and that a significant portion of δ‐Al 2 O 3 is stabilized with θ‐Al 2 O 3 even after prolonged high‐temperature exposures.

Kovarik, Libor↗

Atomic Movies of Laser-Induced Structural and Phase Transformations from Molecular Dynamics Simulations

Molecular dynamics (MD) simulations of laser-materials interactions are playing an important role in investigation of complex and highly non-equilibrium processes involved in short pulse laser processing and surface modification. This role is defined by the ability of MD simulations to reveal in-depth information on the structural and phase transformations induced by the laser excitation and, at the same time, to provide clear visual representations, or “atomic movies,” of laser-induced dynamic processes. This chapter provides a brief overview of recent progress in the description of laser coupling and relaxation of photo-excited states in metals, semiconductors, insulators and molecular systems within the general framework of the classical MD technique and presents several examples of MD simulations of laser melting, generation of crystal defects, photomechanical spallation, explosive boiling and molecular entrainment in laser ablation. Possible directions of future progress in atomistic modeling of laser-materials interactions and the potential role of MD simulations in the design of an integrated multiscale computational model capable of accounting for interrelations between processes occurring at different time- and length-scales are discussed.

Classical Molecular Dynamic↗

The Mobility of Mo during Microbially Mediated Ferrihydrite Phase Transformation

Molybdenum (Mo) is an essential nutrient for almost all organisms. However, at high concentrations, it can be toxic to animals and plants. This study investigated the interactions of Mo(VI) with iron oxyhydroxides during ferrihydrite bioreduction in the presence of the Fe(III)- reducing Geobacter sulfurreducens. Here, in this study, we showed that Mo concentration controlled ferrihydrite phase transformation, leading to Mo release. With the biotic reduction of ferrihydrite and Fe(II) production, Mo(VI) reduction and Mo(IV)O 2 formation were observed for the first time, which further immobilised Mo after surface adsorption of Mo(VI). At low Mo levels (Mo/Fe molar ratios of 1-2 %), sufficient Fe(II) adsorption onto ferrihydrite resulted in its transformation into magnetite nanoparticles (>80%, ~25 nm) which catalysed the reduction of Mo(VI) to form Mo(IV)O 2 and immobilised Mo. Contrastingly, at high Mo concentrations (Mo/Fe molar ratios of 5-10%), Mo(VI)O 4 2- adsorption onto ferrihydrite limited Fe(II) adsorption, subsequently less magnetite (<8-12%) formed while more goethite (~30- 50%, width & length > 15 & 100 nm, respectively) and siderite (~20-30%, width & length > 100 & 200 nm, respectively) with larger particle sizes formed instead, causing Mo(VI) release due to lower Mo adsorption. This study provides a comprehensive understanding of the interaction mechanisms among Geobacter sulfurreducens, Mo(VI), and iron oxyhydroxides, enabling predictions and controls of long-term Mo mobility and Fe mineral transformation under a variety of biogeochemical scenarios.

Geobacter sulfurreducens↗

Dynamic phase transformations in additively manufactured Ti-6Al-4V during thermo-mechanical gyrations

A complex interaction of process parameters, geometry and scan strategies in Additive Manufacturing (AM), can bring about spatial and temporal transients, i.e., Σ T ( x, y, z, time ), within a part. Published literature focusses on fluctuating thermal cycles on the microstructure evolution. However, the microstructural variations have not been correlated to dynamic flow behavior due to the macro- and micro-scale phenomena, i.e., accumulated plastic strains brought about by large thermal gradients, transformational strains and crystallographic misfit strains. Therefore, here we studied the mechanical response of Ti6Al4V alloys produced by AM under externally imposed controlled thermo-mechanical reversals in a Gleeble® thermo-mechanical simulator. The stress-strain behaviors were correlated to phase fractions, lattice strains, and also limited information on crystallographic texture using neutron diffraction techniques at the VULCAN Beamline at SNS, ORNL and also metallographic studies. The results are discussed and rationalized based on theories of static and dynamic phase transformations.

36 MATERIALS SCIENCE↗

Mechanochemistry-driven phase transformation of crystalline covalent triazine frameworks assisted by alkaline molten salts

We report covalent triazine frameworks (CTFs) have shown wide applications in the fields of separation, catalysis, energy storage, and beyond. However, it is a long-term challenging subject to fabricate high-quality CTF materials via facile procedures. Herein, a mechanochemistry-driven procedure was developed to achieve phase transformation of crystalline CTFs assisted by alkaline molten salts. The transformation of CTF-1 from staggered AB to eclipsed AA stacking mode was achieved by short time (30 min) mechanochemical treatment in the presence of molten salts composed of LiOH/KOH, generating high-quality CTF-1 material with high crystallinity, high surface area (625 m 2 g -1 ), and permanent/ordered porosity without carbonization under ambient conditions. This facile procedure could be extended to provide nanoporous three-dimensional CTF materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Phase transformation in Si from semiconducting diamond to metallic β -Sn phase in QMC and DFT under hydrostatic and anisotropic stress

Silicon undergoes a phase transition from the semiconducting diamond phase to the metallic β-Sn phase under pressure. We use quantum Monte Carlo calculations to predict the transformation pressure and compare the results to density-functional calculations employing the local-density approximation, the generalized-gradient approximations PBE, PW91, WC, AM05, PBEsol, and the hybrid functional HSE06 for the exchange-correlation functional. Diffusion Monte Carlo predicts a transition pressure of 14.0±1.0GPa slightly above the experimentally observed transition pressure range of 11.3-12.6 GPa. The HSE06 hybrid functional predicts a transition pressure of 12.4 GPa in excellent agreement with experiments. Exchange-correlation functionals using the local-density approximation and generalized-gradient approximations result in transition pressures ranging from 3.5 to 10.0 GPa, well below the experimental values. The transition pressure is sensitive to stress anisotropy. Anisotropy in the stress along any of the cubic axes of the diamond phase of silicon lowers the equilibrium transition pressure and may explain the discrepancy between the various experimental values as well as the small overestimate of the quantum Monte Carlo transition pressure.

Materials Science↗

In-situ synchrotron diffraction study of the localized phase transformation and deformation behavior in NiTi SMA

The accumulation of dislocation defect was generally recognized as the origin of residual strain and the pseudoelastic instability in NiTi shape memory alloys (SMAs). In the present work, the pseudoelastic instability was studied by comparing the characteristics of Luders-type and uniform transformation mechanism via in-situ synchrotron-based high-energy X-ray diffraction (XRD) characterization. The experimental results showed that the Liiders-type mechanism could result in an intense and sharp increase of stress-induced martensite at the expense of austenite. The residual austenite with high lattice strain within the Luders band might be fully martensitic beyond the stress plateau of the E-a curve. With the accumulation of dislocation defect, the uniform martensitic transformation took place by the progressively homogeneous nucleation and growth of martensite in a local region. While the residual martensite and dislocation density was stabilized during mechanical cycling, the deformation of NiTi SMA turned into a mixture of (i) a balanced forward and reverse phase transformation between austenite and martensite, as well as (ii) the elastic deformation of the aggregate. As a result, there was no apparent increase in dislocation density detected during further cycling.

36 MATERIALS SCIENCE↗

Ultrathin epitaxial barrier layer to avoid thermally induced phase transformation in oxide heterostructures

Incorporating oxides with radically different physical and chemical properties into heterostructures offers tantalizing possibilities to derive new functions and structures. Recently, we have fabricated freestanding 2D oxide membranes using the water-soluble perovskite Sr 3 Al 2 O 6 as a sacrificial buffer layer. Here, with atomic-resolution spectroscopic imaging, we observe that direct growth of oxide thin films on Sr 3 Al 2 O 6 can cause complete phase transformation of the buffer layer, rendering it water-insoluble. More importantly, we demonstrate that an ultrathin SrTiO 3 layer can be employed as an effective barrier to preserve Sr 3 Al 2 O 6 during subsequent growth, thus allowing its integration in a wider range of oxide heterostructures.

36 MATERIALS SCIENCE↗

Phase transformations upon doping in WO 3

High levels of doping in WO 3 have been experimentally observed to lead to structural transformation towards higher symmetry phases. In this paper, we explore the structural phase diagram with charge doping through first-principles methods based on hybrid density functional theory, as a function of doping the room-temperature monoclinic phase transitions to the orthorhombic, tetragonal, and finally cubic phase. Finally, based on a decomposition of energies into electronic and strain contributions, we attribute the transformation to a gain in energy resulting from a lowering of the conduction band on an absolute energy scale.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Stress-induced phase transformation in nanocrystalline UO2

We report a stress-induced phase transfonnation in stoichiometric UO{sub 2} from fluorite to the {alpha}-PbO{sub 2} structure using molecular dynamics (MD) simulations and density functional theory (DFT) calculations. MD simulations, performed on nanocrystalline microstructure under constant-stress tensile loading conditions, reveal a heterogeneous nucleation of the {alpha}-PbO{sub 2} phase at the grain boundaries followed by the growth of this phase towards the interior of the grain. The DFT calculations confinn the existence of the {alpha}-PbO{sub 2} structure, showing that it is energetically favored under tensile loading conditions.

36 MATERIALS SCIENCE↗

Uranium-Titanium Alloys: The Effect of Ti Content on Phase Transformations, Microstructures, and Mechanical Properties

This report documents the findings of collaborative research done at Sandia National Laboratory and the Y-12 Development Division during the 1980s. Ongoing progress reports were presented at various U. S. Department of Energy (DOE) meetings throughout the 1980s, but the findings were never integrated into an inclusive final report. This report provides a summary of the key findings and implications of this research. This work was supported by the DOE National Nuclear Security Administration. The effect of titanium content on phase transformations, microstructures, and mechanical properties of uranium-titanium alloys has been investigated in alloys containing 0.3 wt.% to 2.0 wt.% Ti.

36 MATERIALS SCIENCE↗