Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “phase”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

Mesoscale evolution of voids and microstructural changes in HMX-based explosives during heating through the β-δ phase transition

HMX-based explosives LX-10 and PBX-9501 were heated through the β-δ phase transition. Ultra-small angle x-ray scattering (USAXS) and molecular diffraction were simultaneously recorded as the HMX was heated. Mesoscale voids and structure dramatically change promptly with the β-δ phase transition, rather than with other thermal effects. Also, x-ray induced damage, observed in the USAXS, occurs more readily at elevated temperatures; as such, the dose was reduced to mitigate this effect. Optical microscopy performed during a similar heating cycle gives an indication of changes on longer length scales, while x-ray microtomography, performed before and after heating, shows the character of extensive microstructural damage resulting from the temperature cycle and solid-state phase transition.

36 MATERIALS SCIENCE↗

Phase transitions and magnetocaloric and transport properties in off-stoichiometric GdNi{sub 2}Mn{sub x}

The structural, magnetic, magnetocaloric, transport, and magnetoresistance properties of the rare-earth intermetallic compounds GdNi{sub 2}Mn{sub x} (0.5 ≤ x ≤ 1.5) have been studied. The compounds with x = 0.5 and 0.6 crystallize in the cubic MgCu{sub 2} type phase, whereas samples with x ≥ 0.8 form a mixed MgCu{sub 2} and rhombohedral PuNi{sub 3} phase. A second order magnetic phase transition from a ferromagnetic to paramagnetic state was observed near the Curie temperature (T{sub C}). The GdNi{sub 2}Mn{sub x} (0.5 ≤ x ≤ 1.5) compounds order in a ferrimagnetic structure in the ground state. The largest observed values of magnetic entropy changes (at T{sub C} for ΔH = 5T) were 3.9, 3.5, and 3.1 J/kg K for x = 0.5, 0.6, and 0.8, respectively. The respective relative values of the cooling power were 395, 483, and 220 J/kg. These values are greater than some well-known prototype magnetocaloric materials such as Gd (400 J/kg) and Gd{sub 5}Si{sub 2}Ge{sub 2} (240 J/kg). Analysis of the resistivity data showed a T{sup 2} dependence at low temperatures, suggesting strong electron-phonon interactions, whereas at higher temperatures s-d scattering was dominated by the electron-phonon contribution, resulting in a slow increase in resistivity. Magnetoresistance values of ∼−1.1% were found for x = 0.5 near T{sub C}, and −7% for x = 1.5 near T = 80 K.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Mg and Al-induced phase transformation and stabilization of Ga 2 O 3 -based $\gamma$-phase spinels

Ga 2 O 3 films were deposited on (100) MgAl 2 O 4 spinel substrates at 550, 650, 750, and 850 °C using metal-organic chemical vapor deposition and investigated using x-ray diffraction and transmission electron microscopy. A phase-pure γ-Ga 2 O 3 -based material having an inverse spinel structure was formed at 850 °C; a mixture of the γ-phase and β-Ga 2 O 3 was detected in films grown at 750 °C. Only β-Ga 2 O 3 was determined in the films deposited at 650 and 550 °C. A β- to γ-phase transition occurred from the substrate/film interface during growth at 750 °C. The growth and stabilization of the γ-phase at the outset of film growth at 850 °C was affected by the substantial Mg and Al chemical interdiffusion from the MgAl 2 O 4 substrate observed in the energy-dispersive x-ray spectrum. Further, atomic-scale investigations via scanning transmission electron microscopy of the films grown at 750 and 850 °C revealed a strong tetrahedral site preference for Ga and an octahedral site preference for Mg and Al. It is postulated that the occupation of these atoms in these particular sites drives the β-Ga 2 O 3 to γ-phase transition and markedly enhances the thermal stability of the latter phase at elevated temperatures.

42 ENGINEERING↗

Toluene-induced phase transitions in blue phase liquid crystals

Here, we report phase transitions in blue phase-forming liquid crystals (LCs) that are triggered by exposure to toluene vapours. Specifically, we reveal that room-temperature cholesteric phase mixtures of MLC-2142 and S-811 form blue phases (BP I, II and III) with increasing vapour pressure of toluene. To probe the mechanism underlying this observation, we investigated the phase behaviour of mixtures of BP-forming LCs containing a range of non-volatile aromatic compounds (e.g. pyrene). We interpret our observations to indicate that the principal effect of small aromatic compounds is to decrease the energy penalty associated with the formation of disclination lines in BPs. We also conclude that the absorption of toluene into the BP-forming LCs lowers the energy required for the formation of disclination cores in the BP phase, thus allowing the elastically favoured double-twist cylinders to form at lower temperatures. We further show that BP-forming LCs containing pyrene can be used to detect toluene at concentrations below 200 ppm at room temperature. Overall, these results guide the design of LC-based materials that respond to VOCs at concentrations relevant to occupational settings.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A high-dimensional neural network potential for molecular dynamics simulations of condensed phase nickel and phase transitions

A high-dimensional neural network interatomic potential was developed and used in molecular dynamics simulations of condensed phase Ni and Ni systems with liquid–solid phase coexistence. The reference data set was generated by sampling the potential energy surface over a broad temperature-pressure domain using ab initio MD simulations to train a unified potential. Excellent agreement was achieved between bulk face-centered cubic nickel thermal expansion simulations and relevant experimental data. The same potential also yields accurate structures and diffusivities in the liquid state. The phase transition between liquid and solid phases was simulated using the two-phase interface method. The predicted melting point temperature is within a few kelvins of the literature value. Here, the general methodology could be applied to describe crystals with much more complex phase behaviors.

74 ATOMIC AND MOLECULAR PHYSICS↗

Cubic phase stability, optical and magnetic properties of Cu-stabilized zirconia nanocrystals

By means of experimental and ab initio investigations, in this article we report on the cubic phase stability of Cu doped zirconia (ZrO 2 ) at room temperature, and further characterize its structural, optical and magnetic properties. Various compositions of Zr 1– x Cu x O 2 (0.01 ≤ x ≤ 0.25) nanocrystallites of average size ~16 nm were synthesized using co-precipitation technique. Thermal analysis and kinetics of crystallization revealed that the cubic phase at ambient temperature can be stabilized by using a critical calcination temperature of 500 °C for 8 h in air and a critical composition of $x_c$ = 0.10 ± 0.05. For $x < x_c$, some undigested monoclinic phase of ZrO 2 exists together with the cubic structure. However, for $x > x_c$, the monoclinic CuO emerges as a secondary phase with shrinkage of unit-cell volume with increasing the Cu content. At x = 0.05 and 500 °C calcination temperature, we observe a high degree of cubic crystallinity which breaks down into monoclinic phase with increasing calcination temperature beyond 550 °C. Electron magnetic resonance studies provide evidence for the substitution of Cu 2+ ( 2 D 5/9 ,3d 9 ) ions at Zr 4+ sites with g ∥ = 2.250, g ⊥ = 2.018 and average g a = (g ∥ + 2g ⊥ )/3 ~ 2.1. The temperature dependence of magnetic susceptibility measurements from 2 K to 300 K exhibits Curie–Weiss behaviour whose analysis using g a = 2.1 and spin S = 1/2 yields x = 0.028 and x = 0.068 for the nominal x = 0.05 and x = 0.20 samples, respectively. This magnetic analysis confirms the findings from x-ray diffraction that only a part of Cu is successfully doped into cubic phase of Cu-doped ZrO 2 . The optical bandgap decreases with increasing x, which is due to the emergence of Cu-d states at Fermi-level near the valence bands, thus making Cu-doped zirconia a hole doped (p-type) semiconductor.

electron spin resonance↗

Melting phase diagram of bubble phases in high Landau levels

A low-disorder, two-dimensional electron system (2DES) subjected to a large perpendicular magnetic field and cooled to very low temperatures provides a rich platform for studies of many-body quantum phases. The magnetic field quenches the electrons' kinetic energy and quantizes the energy into a set of Landau levels, allowing the Coulomb interaction to dominate. In excited Landau levels, the fine interplay between short- and long-range interactions stabilizes bubble phases, Wigner crystals with more than one electron per unit cell. In this work, we present the screening properties of bubble phases, probed via a simple capacitance technique where the 2DES is placed between a top and a bottom gate and the electric field penetrating through the 2DES is measured. The bubbles formed at very low temperatures screen the electric field poorly as they are pinned by the residual disorder potential, allowing a large electric field to reach the top gate. As the temperature is increased, the penetrating electric field decreases and, surprisingly, exhibits a pronounced minimum at a temperature that appears to coincide with the melting temperature of the bubble phase. We deduce a quantitative phase diagram, as a function of Landau level filling factor (ν) and temperature, for the transition from the bubble to liquid phases for 4 ≤ ν ≤ 5.

2-dimensional systems↗

Examination of the cerium α-ε phase transition under dynamic loading with x-ray diffraction

Recent examination of the cerium Hugoniot with pyrometry and x-ray diffraction (XRD) has revealed a narrow solid-liquid two-phase region. It has been suggested that nonequilibrium melting may be occurring along the Ce Hugoniot, with either melt kinetics or a sluggish α-ε transition impeding the transition. In particular, the kinetics of the α-ε is unknown and the location of the phase boundary is in dispute. Static measurements suggest a nearly vertical phase boundary that intersects the Hugoniot at 6–7 GPa. This lies in direct conflict with dynamic measurements along the Hugoniot observing α-Ce through incipient melt. This work presents dynamic experiments using XRD to examine the behavior of the α-ε phase transition. The results show that the α-ε phase transition occurs through a tetragonal distortion, with the transition beginning at temperatures below the solid Hugoniot. Following the initial deviation from an ideal fcc structure, the c/a ratio is found to gradually increase with no steady value observed in the ε phase within the range of these experiments (below 17 GPa). Multiple diffraction patterns captured during the peak stress state show no significant change in c/a ratio prior to uniaxial release, upon which Ce reverts to an fcc structure. Furthermore, the results indicate that the α-ε transition occurs rapidly, both on loading and release. An examination of the c/a ratio with increasing temperatures suggests 11.5 GPa as a lower bound for the location of the α-ε-liquid triple point.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Frustrated mixed-spin ladders: Evidence for a bond-order wave phase between rung-singlet and Haldane phases

In frustrated spin ladders, the interplay of frustration and correlations leads to the familiar Haldane (H) and rung-singlet (RS) phases. The nature of the transition between these two phases is still under debate. In this paper we tackle this issue using tools of quantum information theory. We consider frustrated mixed-spin-(1, 1/2) ladders with antiferromagnetic leg, rung and diagonal couplings, and calculate various quantities, such as the entanglement entropy (EE), the Schmidt gap, and the level degeneracy of the entanglement spectrum (ES). We use two numerical techniques, the infinite time-evolving block decimation (iTEBD) and the density matrix renormalization group (DMRG). We demonstrate that there exists an intermediate phase in which the ES levels do not exhibit the characteristic degeneracies of the H and RS phases. To understand the underlying physics in this phase, here we investigate short-range spin correlations along legs, rungs and diagonals and show that in this intermediate phase long-wavelength modulations occur, akin to bond-order waves.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Phase relations and hardness trends of ZrO[subscript 2] phases at high pressure

We use high-resolution synchrotron x-ray powder diffraction and density-functional theory (DFT) to investigate the phase stability, equations of state (EOSs), and mechanical hardness of zirconia (ZrO{sub 2}) up to {approx}54 and 160 GPa, respectively. For the equilibrium phase at ambient conditions (MI), we provide an experimental EOS that is comparable to results obtained from room-pressure Brillouin scattering experiments and bulk modulus-volume systematics but different from previous high-pressure experiments. The experimental second-order Birch-Murnaghan EOS parameters of MI-ZrO{sub 2} are: ambient-pressure volume (V{sub 0}) of 35.15({+-}0.03) {angstrom}{sup 3}/f.u. with an ambient-pressure bulk modulus K{sub 0} of 210({+-}28) GPa. For the high-pressure OI phase, we find that the K{sub 0} = 290({+-}11) GPa, which is 19%-32% higher than previously determined, and V{sub 0} = 33.65({+-}0.07) {angstrom}{sup 3}/f.u. The small volume decrease of 3.4% across the MI {yields} OI transition at {approx}10 GPa is associated with a 38% increase in the bulk modulus consistent with our DFT calculations that predict a {approx}36% and 39% increase in K{sub 0} for the generalized gradient and local density approximations, respectively. In contrast to the EOS of MI and OI, we find that our experimental EOS for the high-pressure OII phase is in good agreement with previous measurements. The large volume decrease across the OI {yields} OII phase transition as obtained from both our experiments and calculations is {approx}10%. Our estimates, using scaling relations, indicate that this phase, while dense and quenchable, may have a comparatively low mechanical hardness of {approx} 10 GPa.

43 PARTICLE ACCELERATORS↗

Discovering phases, phase transitions, and crossovers through unsupervised machine learning: A critical examination

Here, we apply unsupervised machine learning techniques, mainly principal component analysis (PCA), to compare and contrast the phase behavior and phase transitions in several classical spin models - the square and triangular-lattice Ising models, the Blume-Capel model, a highly degenerate biquadratic-exchange spin-one Ising (BSI) model, and the 2D XY model, and examine critically what machine learning is teaching us. We find that quantified principal components from PCA not only allow exploration of different phases and symmetry-breaking, but can distinguish phase transition types and locate critical points. We show that the corresponding weight vectors have a clear physical interpretation, which is particularly interesting in the frustrated models such as the triangular antiferromagnet, where they can point to incipient orders. Unlike the other well-studied models, the properties of the BSI model are less well known. Using both PCA and conventional Monte Carlo analysis, we demonstrate that the BSI model shows an absence of phase transition and macroscopic ground-state degeneracy. The failure to capture the 'charge' correlations (vorticity) in the BSI model (XY model) from raw spin configurations points to some of the limitations of PCA. Finally, we employ a nonlinear unsupervised machine learning procedure, the 'antoencoder method', and demonstrate that it too can be trained to capture phase transitions and critical points.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Phase Demodulation by Frequency Chirping in Coherence Microwave Photonic Interferometry

This paper presents a signal processing method to demodulate the optical interference phase of cascaded individual optical fiber intrinsic Fabry-Perot interferometric (IFPI) sensors in a coherent microwave-photonic interferometry (CMPI) distributed sensing system. The new method utilizes the chirp effect of electro-optic modulator (EOM) to create a quasi-quadrature optical interference phase shift between two adjacent pulses which correspond to two adjacent reflection points in the time domain. The phase shift can be controlled by adjusting the bias voltage that is applied to the EOM. The interference phase is calculated by elliptically fitting the phase shift. The interference phase change is proportional to the optical path difference (OPD) change of the interferometer, and the sign can be used to differentiate the increase or decrease of the OPD. The method is demonstrated for distributed strain sensing, showing good linearity, high resolution and large dynamic range.

42 ENGINEERING↗

Strain phase equilibria and phase‐field method of ferroelectric polydomain: A case study of monoclinic K x Na 1 − x NbO 3 thin films

Abstract Knowledge of the thermodynamic equilibria and domain structures of ferroelectrics is critical to establishing their structure–property relationships that underpin their applications from piezoelectric devices to nonlinear optics. Here, we establish the strain condition for strain phase separation and polydomain formation and analytically predict the corresponding domain volume fractions and wall orientations of, relatively low symmetry and theoretically more challenging, monoclinic ferroelectric thin films by integrating thermodynamics of ferroelectrics, strain phase equilibria theory, microelasticity, and phase‐field method. Using monoclinic K x Na 1 − x NbO 3 (0.5 < x < 1.0) thin films as a model system, we establish the polydomain strain–strain phase diagrams, from which we identify two types of monoclinic polydomain structures. The analytically predicted strain conditions of formation, domain volume fractions, and domain wall orientations for the two polydomain structures are consistent with phase‐field simulations and in good agreement with experimental results in the literature. The present study demonstrates a general, powerful analytical theoretical framework to predict the strain phase equilibria and domain wall orientations of polydomain structures applicable to both high‐ and low‐symmetry ferroelectrics and provide fundamental insights into the equilibrium domain structures of ferroelectric K x Na 1 − x NbO 3 thin films that are of technology relevance for lead‐free dielectric and piezoelectric applications.

36 MATERIALS SCIENCE↗

Modeling of Phase Transitions of Graphites to Diamond-Like Phases

The method of the density functional theory is used to study structural transformations between graphites and diamond-like phases. The calculations have been carried out in two approximations: a local density approximation and a generalized gradient approximation. It is found that the phase transitions of hexagonal graphene layers to a cubic diamond and diamond-like phases must occur at uniaxial compressions of ~57–71 GPa, whereas some diamond-like phases can be obtained from tetragonal graphene layers at significantly lower pressures of 32–52 GPa. The X-ray diffraction patterns have been calculated for the phase transition of graphite I4{sub 1}/amd to tetragonal LA10 phase that takes place at the minimum pressure that can be used for experimental identification of these compounds.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

On-Shot Focal-Spot Characterization Technique Using Phase Retrieval

We present an on-shot focal-spot characterization technique based on a phase-retrieval scheme that retrieves near-field phase from multiplane focal-spot measurements in an experimental target chamber. The technique is easy to implement inside a target chamber and is demonstrated in a multiterawatt laser system. It is also found that phase retrieval can quantitatively detect residual angular dispersion coming from the pulse compressor misalignment.

Bahk, S -W↗

Thermal Expansion and Magnetostriction of Laves-Phase Alloys: Fingerprints of Ferrimagnetic Phase Transitions

The magneto–elastic coupling effect correlates to the changes of moment and lattice upon magnetic phase transition. Here, we report that, in the pseudo-binary Laves-phase Tb 1-x Dy x Co 2 system (x = 0.0, 0.7, and 1.0), thermal expansion and magnetostriction can probe the ferrimagnetic transitions from cubic to rhombohedral phase (in TbCo 2 ), from cubic to tetragonal phase (in DyCo 2 ), and from cubic to rhombohedral then to tetragonal phase (in Tb 0.3 Dy 0.7 Co 2 ). Furthermore, a Landau polynomial approach is employed to qualitatively investigate the thermal expansion upon the paramagnetic (cubic) to ferrimagnetic (rhombohedral or tetragonal) transition, and the calculated thermal expansion curves agree with the experimental curves. Our work illustrates the correlation between crystal symmetry, magnetostriction, and thermal expansion in ferrimagnetic Laves-phase alloys and provides a new perspective to investigate ferrimagnetic transitions.

36 MATERIALS SCIENCE↗

Energy law preserving C{sup 0} finite element schemes for phase field models in two-phase flow computations

Highlights: {yields} We study phase-field models for multi-phase flow computation. {yields} We develop an energy-law preserving C0 FEM. {yields} We show that the energy-law preserving method work better. {yields} We overcome unphysical oscillation associated with the Cahn-Hilliard model. - Abstract: We use the idea in to develop the energy law preserving method and compute the diffusive interface (phase-field) models of Allen-Cahn and Cahn-Hilliard type, respectively, governing the motion of two-phase incompressible flows. We discretize these two models using a C{sup 0} finite element in space and a modified midpoint scheme in time. To increase the stability in the pressure variable we treat the divergence free condition by a penalty formulation, under which the discrete energy law can still be derived for these diffusive interface models. Through an example we demonstrate that the energy law preserving method is beneficial for computing these multi-phase flow models. We also demonstrate that when applying the energy law preserving method to the model of Cahn-Hilliard type, un-physical interfacial oscillations may occur. We examine the source of such oscillations and a remedy is presented to eliminate the oscillations. A few two-phase incompressible flow examples are computed to show the good performance of our method.

97 MATHEMATICS AND COMPUTING↗