Results for “oxygen evolution” — Page 24

NASA NTRSDate not supplied

Characterization of Modern Spacecraft Materials under Space-simulated Environment

External spacecraft materials play an important role in satellite protection from the harsh space environment. Research has shown that the physical, chemical, and optical properties of matter change continuously as a result of exposure to solar radiation and aggressive chemical species produced in Earth’s upper atmosphere. Thorough knowledge of the material properties evolution throughout a planned mission lifetime helps to improve the reliability of spacecraft. Moreover, the establishment of correlation factors between true space exposure and accelerated space weather experiments at ground facilities enables accurate prediction of on-orbit material performance based on laboratory-based testing. The presented work aims to evaluate the radiation effects of low Earth orbit (LEO) environment, namely, exposure to the high-energy electrons, atomic oxygen (AO), and vacuum ultraviolet (VUV), of several modern spacecraft materials. The studied materials represent the “flight duplicates” of samples that will be launched as a part of the Materials International Space Station Experiment Flight Facility (MISSE-FF) mission in 2022. MISSE-FF flight sample collection comprises different classes of polymers, including polyimides from the Kapton family, manufactured by E.I du Pont de Nemours and Co., Polyethylene terephthalate (PET) materials, liquid crystal polymers, PI/Polyhedral Oligomeric Silsesquioxanes (POSS), and carbon and glass fiber reinforced polymers. A sequential exposure approach was undertaken to allow monitoring of degradation induced by each environmental component (electrons, AO, and VUV) separately. Surface morphology, optical, and charge transport properties of selected materials were characterized using different techniques, namely, atomic force and scanning electron microscopy, ultraviolet visible (UV/Vis) transmission, reflectance, Bidirectional Reflectance Distribution Function (BRDF), and surface potential decay measurements.

Elena Plis↗

NASA NTRSDate not supplied

Spacecraft Materials Degradation Under Space-Simulated Low Earth Orbit (LEO) Environment

External spacecraft materials play an important role in satellite protection from the harsh space environment. Research has shown that the physical, chemical, and optical properties of matter change continuously as a result of exposure to solar radiation and aggressive chemical species produced in Earth’s upper atmosphere. Thorough knowledge of the material properties evolution throughout a planned mission lifetime helps to improve the reliability of spacecraft. Moreover, the establishment of correlation factors between true space exposure and accelerated space weather experiments at ground facilities enables accurate prediction of on-orbit material performance based on laboratory-based testing. The presented work aims to evaluate the radiation effects of low Earth orbit (LEO) environment, namely, exposure to the high-energy electrons, atomic oxygen (AO), and vacuum ultraviolet (VUV), of several modern spacecraft materials. The studied materials represent the “flight duplicates” of samples that are launched as a part of the 16th Materials International Space Station Experiment Flight Facility (MISSE-FF) mission in 2022.

Elena A Plis↗

NASA NTRSDate not supplied

Continuous Habitable Zones: Pairing a GCM and Bayesian Framework to Predict Habitable Zone Evolution

In the near-future, new space telescopes like JWST, LUVOIR, and HabEx will begin attempting to explore the properties of atmospheres of potentially habitable planets. This will require a significant amount of time and resources for even a single planet, which makes it essential to prioritize observations by those most-likely to have detectable life. Here we present a statistical method to estimate the probabilities that specific exoplanets have been continuously in the habitable zone of their host stars for more than 2 billion years, the approximate time it took life on Earth to significantly increase the oxygen content of the atmosphere. We introduce the use of statistics of an ensemble of 3D planetary general circulation models to estimate these probabilities, replacing prior 1D model estimates.

habitable planets↗

NASA NTRSDate not supplied

Pairing a GCM and Bayesian Framework to Predict Habitable Zone Evolution

In the near-future, new space telescopes like JWST, LUVOIR, and HabEx will begin attempting to explore the properties of atmospheres of potentially habitable planets. This will require a significant amount of time and resources for even a single planet, which makes it essential to prioritize observations by those most-likely to have detectable life. Here we present a statistical method to estimate the probabilities that specific exoplanets have been continuously in the habitable zone of their host stars for more than 2 billion years, the approximate time it took life on Earth to significantly increase the oxygen content of the atmosphere. We introduce the use of statistics of an ensemble of 3D planetary general circulation models to estimate these probabilities, replacing prior 1D model estimates.

habitable planets↗

NASA NTRSDate not supplied

Spacecraft Materials Degradation Under Space-Simulated Low Earth Orbit (LEO) Environment

External spacecraft materials play an important role in satellite protection from the harsh space environment. Research has shown that the physical, chemical, and optical properties of matter change continuously as a result of exposure to solar radiation and aggressive chemical species produced in Earth’s upper atmosphere. Thorough knowledge of the material properties evolution throughout a planned mission lifetime helps to improve the reliability of spacecraft. Moreover, the establishment of correlation factors between true space exposure and accelerated space weather experiments at ground facilities enables accurate prediction of on-orbit material performance based on laboratory-based testing. The presented work aims to evaluate the radiation effects of low Earth orbit (LEO) environment, namely, exposure to the high-energy electrons, atomic oxygen (AO), and vacuum ultraviolet (VUV), of several modern spacecraft materials. The studied materials represent the “flight duplicates” of samples that are launched as a part of the 16th Materials International Space Station Experiment Flight Facility (MISSE-FF) mission in 2022.

Elena Plis↗

NASA NTRS2024

Heterogeneous Outgassing Regions Identified on Active Centaur 29P/Schwassmann–Wachmann 1

Centaurs are transitional objects between primitive trans-Neptunian objects and Jupiter-family comets. Their compositions and activities provide fundamental clues regarding the processes affecting the evolution of and interplay between these small bodies. Here we report observations of centaur 29P/Schwassmann–Wachmann 1 (29P) with the James Webb Space Telescope (JWST). We identified localized jets with heterogeneous compositions driving the outgassing activity. We employed the NIRSpec mapping spectrometer to study the fluorescence emissions of CO and obtain a definitive detection of CO 2 for this target. The exquisite sensitivity of the instrument also enabled carbon and oxygen isotopic signatures to be probed. Molecular maps reveal complex outgassing distributions, such as jets and anisotropic morphology, which indicate that 29P’s nucleus is dominated by active regions with heterogeneous compositions. These distributions could reflect that it has a bilobate structure with compositionally distinct components or that strong differential erosion takes place on the nucleus. As there are no missions currently planning to visit a centaur, these observations demonstrate JWST’s unique capabilities in characterizing these objects.

Sara Faggi↗

NASA NTRS2010

RESOLVE 2010 Field Test

This slide presentation reviews the field tests conducted in 2010 of the Regolith Environment Science & Oxygen & Lunar Volatile Extraction (RESOLVE). The Resolve program consist of several mechanism: (1) Excavation and Bulk Regolith Characterization (EBRC) which is designed to act as a drill and crusher, (2) Regolith Volatiles Characterization (RVC) which is a reactor and does gas analysis,(3) Lunar Water Resources Demonstration (LWRD) which is a fluid system, water and hydrogen capture device and (4) the Rover. The scientific goal of this test is to demonstrate evolution of low levels of hydrogen and water as a function of temperature. The Engineering goals of this test are to demonstrate:(1) Integration onto new rover (2) Miniaturization of electronics rack (3) Operation from battery packs (elimination of generator) (4) Remote command/control and (5) Operation while roving. Views of the 2008 and the 2010 mechanisms, a overhead view of the mission path, a view of the terrain, the two drill sites, and a graphic of the Master Events Controller Graphical User Interface (MEC GUI) are shown. There are descriptions of the Gas chromatography (GC), the operational procedure, water and hydrogen doping of tephra. There is also a review of some of the results, and future direction for research and tests.

Captain, J.↗

NASA NTRSDate not supplied

Ground Testing of the MISSE-16 Materials

External spacecraft materials play an important role in satellite protection from the harsh space environment. Research has shown that the physical, chemical, and optical properties of matter change continuously as a result of exposure to solar radiation and aggressive chemical species produced in Earth’s upper atmosphere. Thorough knowledge of the material properties evolution throughout a planned mission lifetime helps to improve the reliability of spacecraft. Moreover, the establishment of correlation factors between true space exposure and accelerated space weather experiments at ground facilities enables accurate prediction of on-orbit material performance based on laboratory-based testing. The presented work aims to evaluate the radiation effects of low Earth orbit (LEO) environment, namely, exposure to the high-energy electrons and atomic oxygen (AO), of heritage and novel spacecraft materials selection. The studied materials represent the “flight duplicates” of samples that are launched as a part of the 16th Materials International Space Station Experiment Flight Facility (MISSE-FF) mission in 2022.

Elena A. Plis↗

NASA NTRS1986

Paleosols and the chemical evolution of the atmosphere

The chemistry and mineralogy of soils reflects the chemistry of the atmosphere below which they develop. Today the presence of a cover of land plants can obscure the signature of a highly oxidizing atmosphere. Prior to the advent of higher land plants ca. 400 m.y. ago the obscuring effect of a biological interface should have been minor. It can be shown that under such conditions the behavior of ferrous iron during weathering depends on the relationship between the ratio of the net concentration of oxidants to the concentration of acids in rainwater, and on the ratio of the oxygen demand to the acid demand for complete weathering of the parent rock. An analysis of the behavior of iron in some 15 paleosols between 1.0 and 2.9 b.y. in age showed some time ago that iron was retained, or largely retained, in paleosols developed on rocks with a low ratio of oxidant demand to acid demand (R value) and was lost from paleosols with a high R value. The results indicate that between 1.1 and 2.9 b.y.b.p. the ratio of the net concentration of oxidants to CO2 in rainwater was less than ca. 1/600 of the present-day value. Work during the past year has sought to extend the data base for paleosols and to define more precisely the relationships between the composition of paleosols and the chemistry of the atmosphere below which they developed.

Holland, H. D.↗

NASA NTRS2012

Oxygen Isotope Compositions of the Kaidun Meteorite - Indications for Aqeuous Alteration of E-Chondrites

The Kaidun microbreccia is a unique meteorite due to the diversity of its constituent clasts. Fragments of various types of carbonaceous (CI, CM, CV, CR), enstatite (EH, EL), and ordinary chondrites, basaltic achondrites, and impact melt products have been described, and also several unknown clasts [1, and references therein]. The small mm-sized clasts represent material from different places and times in the early solar system, involving a large variety of parent bodies [2]; meteorites are of key importance to the study of the origin and evolution of the solar system, and Kaidun is a collection of a range of bodies evidently representing samples from across the asteroid belt. The parent-body on which Kaidun was assembled is believed to be a C-type asteroid, and 1-Ceres and the martian moon Phobos have been proposed [1-4]. Both carbonaceous (most oxidized) and enstatite (most reduced) chondrite clasts in Kaidun show signs of aqueous alterations that vary in type and degree and are most likely of pre-Kaidun origin [1, 4].

Ziegler, K.↗

NASA NTRS1992

A new model for plasma transport and chemistry at Saturn

A model of plasma transport and chemistry is described which calculates the evolution of a plasma population in latitude and radial distance. This model is applied to the magnetosphere of Saturn, where it is used to fit the density profile of the heavy ions assuming both satellite and ring sources of plasma. Use of an extended source region is found to significantly alter the resulting plasma profile. Water ions cannot fit the observed density profile inside L = 6 even with a large ring source. Oxygen ions can fit the density profile throughout the region inside L = 12 given a suitable profile of neutral hydrogen; a suitable profile contains up to 5 H/cu cm outside L = 4 with the number increasing inside this. Preferred values of K are 1-3 x 10 exp -10 R(S)2/s, but any value K less than 10 exp -9 R(S)2/s can be accommodated. The temperature profile is shown to favor models invoking in situ plasma formation and loss as opposed to models where transport is important.

Richardson, John D.↗

NASA NTRS2004

Formation and Stability of Radiation Products in Europa's Icy Shell

Spectra of Europa reveal a surface dominated by water-ice along with hydrated materials and minor amounts of SO2, CO2, and H2O2. Jovian magnetospheric ions (protons, sulfur, and oxygen) and electrons produce significant chemical modifications of the surface on time scales of a few years at micrometer depths. Our laboratory studies examine the formation and stability of radiation products in H2O-rich ices relevant to Europa. Infrared (IR) spectra of ices before and after irradiation reveal the radiation destruction of molecules and the formation of products at 86 - 132 K. In addition, spectra of ices during warming track thermal evolution due to chemical changes and sublimation processes. IR-identified radiation products in 86 - 132 K irradiated H2O + SO2 ices are the bisulfate ion, HSO4(-), sulfate ion, SO4(2-) and the hydronium ion, H3O(+). Warming results in the formation of a residual spectrum similar to liquid sulfuric acid, H2SO4, for H2O:SO2 ratios of 30:1, whereas hydrated sulfuric acid, H2SO4 4 H2O, forms for ratios of 30:1. Radiation products identified for irradiated H2O + H2S ices at 86 K are H2S2 and SO2. When irradiated at 110 and 132 K, ices with H2O:H2S ratios if either 3:1 or 30:1 show the formation of H2SO4 4 H2O on warming to 175 K. We have also examined the radiation stability of H2SO4. Addition of CO2 to H2O + SO2 ices results in the formation of CO3 at 2046 cm (sup -1) (4.89 m). This is the strongest band from a carbon-containing product in the mid-IR spectral region, and it is also seen when either pure CO2 or H2O + CO2 ice is irradiated. Experiments with CH4 added to H2O + SO2 + CO2 ices addressed the question of methane's use as a marker of methanogens in an irradiated ice environment. New results on the near-IR spectrum of pure H2O2 will be included in this presentation. Interpretations of near-IR water bands, with H2O2 present, will be discussed. Irradiations of H2O2 and H2O + H2O2 mixtures, to examine the possibility of O2 and O3 formation, are currently under investigation and new results will be discussed.

Moore, M. H.↗

NASA NTRS1987

Theoretical constraints on oxygen and carbon dioxide concentrations in the Precambrian atmosphere

Simple (one-dimensional) climate models suggest that carbon dioxide concentrations during the Archean must have been at least 100-1000 times the present level to keep the Earth's surface temperature above freezing in the face of decreased solar luminosity. Such models provide only lower bounds on CO2, so it is possible that CO2 levels were substantially higher than this and that the Archean climate was much warmer than today. Periods of extensive glaciation during the early and late Proterozoic, on the other hand, indicate that the climate at these times was relatively cool. To be consistent with climate models CO2 partial pressures must have declined from approximately 0.03 to 0.3 bar around 2.5 Ga ago to between 10(-3) and 10(-2) bar at 0.8 Ga ago. This steep decrease in carbon dioxide concentrations may be inconsistent with paleosol data, which implies that pCO2 did not change appreciably during that time. Oxygen was essentially absent from the Earth's atmosphere and oceans prior to the emergence of a photosynthetic source, probably during the late Archean. During the early Proterozoic the atmosphere and surface ocean were apparently oxidizing, while the deep ocean remained reducing. An upper limit of 6 x 10(-3) bar for pO2 at this time can be derived by balancing the burial rate of organic carbon with the rate of oxidation of ferrous iron in the deep ocean. The establishment of oxidizing conditions in the deep ocean, marked by the disappearance of banded iron formations approximately 1.7 Ga ago, permitted atmospheric oxygen to climb to its present level. O2 concentrations may have remained substantially lower than today, however, until well into the Phanerozoic.

Review, Tutorial↗

NASA NTRS2019

Investigating the History of Aubrites Using X-Ray Computed Tomography and Bulk Partition Coefficients

The aubrites are a unique group of differentiated meteorites that formed on parent bodies with oxygen fugacities (ƒO2) from ~2 to ~6 log units below the iron-wustite buffer. At these highly reduced condi- tions, elements deviate from the geochemical behavior exhibited at terrestrial ƒO2, and may form FeO-poor silicates, Si-bearing metals, and exotic sulfides. Geochemical examinations of aubrites, such as mineral major-element compositions, bulk-rock compositions, O isotopes, and crystallization ages, are crucial to understand their formation and evolution at extreme ƒO2 conditions. In this study, we determine partitioning relationships of elements between bulk silicate, sulfide, and metal phases within aubrites, and compare the results to partition coefficients determined from petrologic experiments run under mercurian conditions. While previous studies have described the petrology and 2D modal abundances of aubrites, this work provides the first 3D view of aubritic mineralogies, which are com- pared to the available 2D data. Constraints of 3D modal abundances will increase the accuracy of computed bulk distribution coefficients; therefore, 3D scans of aubrite samples are imperative. We utilize X-ray computed tomogra- phy (XCT) to non-destructively analyze the distribution and abundances of mineral phases in aubrites and locate composite clasts of sulfide grains for future analysis.

Wilbur, Z. E.↗

NASA NTRS1972

The evolution of water vapor in the atmosphere of Venus.

Examination of the feasibility of loss of water vapor from the Venus atmosphere, assuming H2O as the sole initial constituent. A steady-state model is constructed, and the photochemistry establishes the distribution of important products in the upper atmosphere. Calculations of exospheric temperatures yield values as high as 100,000 K. Such large temperatures result from the large abundance of atomic hydrogen in the exosphere, and imply a dynamic outflow of all constituents from the upper region of the atmosphere. Such an outflow would cause the escape of all hydrogen and some of the oxygen resulting from dissociation of H2O. Little loss of CO2 would result, due to its low abundance in the upper region, permitting its accumulation to the present observed value. It is concluded that if Venus formed from the same mix of materials as the earth, much tectonic activity and fairly rapid outgassing must have occurred during the early phase of its history to account for the loss of water vapor.

Smith, L. L.↗

NASA NTRS1974

Geochemistry and the origin of life

The origin of life on earth is examined from a viewpoint stressing the validity of the concept of chemical evolution. The different geological formations supporting the mechanisms of the theory are described; the stage of chemical evolution (preceding that of biological evolution) would have taken place from the time of the origin of the earth and meteorites, 4.6 billion years ago, to the early Precambrian period, about 3.2 billion years ago. Specific aspects of the problem discussed include amino acids from spark discharges and their comparison with the Murchison meteorite amino acids, the properties and theory of genesis of the carbonaceous complex within the cold Bokevelt meteorite, ammonion ion concentration in the primitive ocean, the oxygen isotope chemistry of ancient charts, the origin and rise of oxygen concentration in the earth's atmosphere, Precambrian microorganisms and evolutionary events prior to the origin of vascular plants, and biogenicity and significance of the oldest known stromatolites.

Kvenvolden, K. A.↗

NASA NTRS2003

Environmental Consequences of an Emerging Biosphere

It seems feasible to detect biological signatures ("biosignatures") in other planetary systems using the tools of astronomy. There are at least two types of biosignatures; spectral and/or polarization features created by biological products, and electromagnetic signals created by technology. The latter example of a biosignature requires SETI-like searches. This presentation addresses only spectral signatures of biological products and properties of habitable planets. Spectral biosignatures are indeed promising targets for near-term exploration. They can arise from organic constituents (e.g., vegetation) and/or inorganic products (e.g., atmospheric O2). Features originating from a planet's surface are likely to be localized in specific regions, whereas gaseous biosignatures can become globally distributed by atmospheric circulation. Biosignatures should be most abundant within environments that are, or once were, habitable. We currently believe that habitable environments necessarily provide Liquid water and biochemically useful energy. However, we do not yet fully comprehend the diversity of features that might arise within these environments that are non-biological in origin, yet mimic biosignatures. For example, atmospheres reflect the events leading to their origins as well as a host of ongoing planetary processes that might include biological activity. We are persuaded that abundant atmospheric oxygen in an environment with abundant liquid water constitutes definitive evidence of life. However, our own early biosphere thrived for more than a billion years in the absence of abundant atmospheric oxygen. The production of other, more reduced, gaseous biomarkers of "young" and/or anaerobic biospheres has not been systematically studied. Biological gas production is strongly controlled by the structure and function of microbial ecosystems. Investigations of microbial ecosystems that are close analogs of ancient communities offer multiple benefits. Such studies can interpret the production of the most important biomarker gases, while simultaneously helping us to understand the formidable array of ecological processes that guided early biological evolution. Astrobiologists must recognize those aspects of biosignatures that truly reflect the most fundamental, and therefore universal, properties of life. We must learn how the environment can modify biosignatures, and how technology can enable an array of biosignatures to be detected remotely within realistic budgetary constraints

DesMarais, David J.↗

NASA NTRS2003

Transient Evolution of a Planar Diffusion Flame Aft of a Translating Flat Plate

The high degree of spatial symmetry of a planar diffusion flame affords great simplifications for experimental and modeling studies of gaseous fuel combustion. Particularly, in a microgravity environment, where buoyancy effects are negligible, an effectively strain-rate-free, vigorous flame may be obtained. Such a flame can also provide long residence times and large length scales for practical probing of flame structures and soot processes. This 2-D numerical study explores the feasibility of establishing such a planar diffusion flame in an enclosed container utilizing a realistic test protocol for a microgravity experiment. Fuel and oxygen mixtures, initially segregated into two half-volumes of a squat rectangular container by a thin separator, are ignited as soon as a flammable mixture is formed in the wake of the separator withdrawn in the centerplane. A triple-flame ensues that propagates behind the trailing edge of the separator. The results of calculations show that the mechanically- and thermally-induced convection decays in about two seconds. The establishment of a planar diffusion flame after this period seems feasible in the central region of the container with sufficient quantities of reactants left over for subsequent studies. An analysis of the flame initiation and formation process suggests how the feasibility of creating such a flame can be further improved.

Gokoglu, Suleyman A.↗