Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “oriented”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

X-ray Scattering Measurements of Particle Orientation in a Sheared Polymer/Clay Dispersion

We report steady and transient measurements of particle orientation in a clay dispersion subjected to shear flow. An organically modified clay is dispersed in a Newtonian polymer matrix at a volume fraction of 0.02, using methods previously reported by Mobuchon et al. (Rheol Acta 46: 1045, 2007). In accord with prior studies, mechanical rheometry shows yield stress-like behavior in steady shear, while time dependent growth of modulus is observed following flow cessation. Measurements of flow-induced orientation in the flow-gradient plane of simple shear flow using small-angle and wide-angle X-ray scattering (SAXS and WAXS) are reported. Both SAXS and WAXS reveal increasing particle orientation as shear rate is increased. Partial relaxation of nanoparticle orientation upon flow cessation is well correlated with time-dependent changes in complex modulus. SAXS and WAXS data provide qualitatively similar results; however, some quantitative differences are attributed to differences in the length scales probed by these techniques.

36 MATERIALS SCIENCE↗

Tungsten Blister Formation Kinetic as a Function of Fluence, Ion Energy and Grain Orientation Dependence Under Hydrogen Plasma Environment

This work deals with the formation kinetic of tungsten (W) blisters under smooth plasma conditions, i.e. low hydrogen flux and energy in order to analyze the first stages of their formation. In addition, we focus on determining the W grain orientation where blisters grow preferentially. For this purpose, mirror-polished polycrystalline tungsten samples were exposed to hydrogen plasma under fixed hydrogen flux of 2.2 × 10{sup 20} m{sup −2} s{sup −1}, with a fluence in the range of ~ 10{sup 24} m{sup −2}, ion energy of ~ 20, 120 and 220 eV, and sample surface temperature of ~ 500 K. The formation of blisters at the surface was investigated using SEM, AFM and EBSD to determine the size, the distribution and the orientation of grain where blisters are formed, respectively. The critical fluence for initiating blisters was established around 2.3 × 10{sup 24} m{sup −2}. The evolution of blister size distribution and density is discussed as function of fluence and ion energy. At lower ion energy, i.e. 20 eV, only nanoblisters (less than 150 nm) are observed whatever the fluence value (1.5 and 2.3 × 10{sup 24} m{sup −2}). At higher ion energy i.e. 120 and 220 eV, micrometric (~ few to tens of µm) blisters are observed and their density highly depends on fluence. We show that blisters can also be formed on (001) oriented grains contrarily to previous results from the literature where the (111) orientation seemed more favorable. Such information is of importance for tungsten based fusion tokamak operation and design.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Linear dichroism of DNA: Characterization of the orientation distribution function caused by hydrodynamic shear

Linear dichroism provides information on the orientation of chromophores part of, or bound to, an orientable molecule such as DNA. For molecular alignment induced by hydrodynamic shear, the principal axes orthogonal to the direction of alignment are not equivalent. Thus, the magnitude of the flow-induced change in absorption for light polarized parallel to the direction of flow can be more than a factor of two greater than the corresponding change for light polarized perpendicular to both that direction and the shear axis. The ratio of the two flow-induced changes in absorption, the dichroic increment ratio, is characterized using the orthogonal orientation model, which assumes that each absorbing unit is aligned parallel to one of the principal axes of the apparatus. The absorption of the alienable molecules is characterized by components parallel and perpendicular to the orientable axis of the molecule. The dichroic increment ratio indicates that for the alignment of DNA in rectangular flow cells, average alignment is not uniaxial, but for higher shear, as produced in a Couette cell, it can be. The results from the simple model are identical to tensor models for typical experimental configuration. Approaches for measuring the dichroic increment ratio with modern dichrometers are further discussed.

59 BASIC BIOLOGICAL SCIENCES↗

Preferred orientation of calcium aluminosilicate hydrate compacts: Implications for creep and indentation

Nano/micro-indentation has been extensively used to examine elastic properties and creep of cement-based materials. However, there have been inconsistencies in the measured elastic moduli and debate on the creep mechanism of calcium (alumino) silicate hydrates (C-(A-)S-H). To bring new insights, we examined the deviatoric stress-induced preferred orientation of calcium aluminosilicate hydrate (C-A-S-H), portlandite, and ettringite compacts, using synchrotron-based X-ray diffraction. Intense preferred orientations were observed in C-A-S-H compacts, and the c-axis of unit cells is highly aligned with the compression direction; weaker c-axis related fiber-type texture formed in portlandite and ettringite. Higher humidity, greater compacting pressure, and/or increased duration of the pressure intensified the C-A-S-H preferred orientation, which is facilitated by gel-pore water lubrication. This pressure-induced time-dependent preferential re-orientation of crystallites can contribute to the creep of cement-based materials, and it may cause overrepresentation of the soft c-axis of C-(A-)S-H unit-cell in nanoindentation experiments and underestimation of Young's modulus.

36 MATERIALS SCIENCE↗

The use of digital thread for reconstruction of local fiber orientation in a compression molded pin bracket via deep learning

A deep convolutional neural network (DCNN) was used for microstructure reconstruction using artificial intelligence (MR-AI) by predicting local average fiber orientation distributions (FOD) in a 3D prepreg platelet molded composite (PPMC) pin bracket. To train the MR-AI model, surface strain fields from residual stresses simulated in PPMC plates were used as the input to the DCNN. A training dataset included PPMC plates with various degrees of global fiber alignment, based on the information obtained from high-fidelity flow simulation of a pin bracket. Further, the MR-AI model was then deployed to analyze FOD in the 3D pin bracket by conducting thermo-elastic residual stress analysis. Initially, the MR-AI model was established entirely on the synthetic simulation data. Then, a μCT scan of a physically molded pin bracket was used to create a finite element model that provided data for additional validation of the DCNN model. For the μCT scan finite element pin bracket the MR-AI model predicted the distribution of fiber orientation tensor components with MAE of 0.10 indicating a global prediction error of 10%. For the flow simulated pin bracket, the MR-AI model predicted the distribution of fiber orientation tensor components with a global prediction error of 11%. The MR-AI model showed the ability to predict regions of varying alignment in the base and flange of the pin bracket. The proposed MR-AI methodology allows for rapid prediction of FOD in geometrically complex parts and offers a promising path to detecting unique fiber orientation states in molded components.

42 ENGINEERING↗

Preferential orientation of Te precipitates in melt-grown CZT

Cadmium zinc telluride (Cd1-xZnxTe or CZT) has proved to be a useful material for semiconductor gamma-ray spectrometers and other electro-optic devices. It is often grown Te-rich to optimize its electrical characteristics, but this off-stoichiometric growth leads to the formation of semimetallic Te precipitates in the semiconducting host crystal. These precipitates can impair device performance and their formation needs to be inhibited, if possible, during growth. Characterization of melt-grown CZT has shown that Te precipitates are often faceted. In this study, characterization of several particles of different shapes revealed that most of the Te precipitates were preferentially oriented with the {101}CZT||{-12-10}Te . A secondary orientation relationship was also observed as {11-1}CZT||{01-11}Te for one of the {111}CZT family of planes. One of the particles exhibited {110}CZT||{01-10}Te and {001}CZT||{0001}Te . Precipitates were often found on {111}CZT twin boundaries and, in these cases, it was possible to assign specific orientations with respect to the twin plane. The expected orientation of the {0001}-plane of Te aligned with the {111}-plane of CZT was not observed even though a good lattice match is predicted in ab initio models. Observations of strained and polycrystalline Te precipitates are also discussed with relevance to the ab initio model and to impacts on electronic properties.

36 MATERIALS SCIENCE↗

Slate – A new record for crystal preferred orientation

This report describes microstructures and preferred orientation of a Devonian slate from the Belgian Ardennes (La Fortelle quarry). The sample, composed largely of muscovite, chlorite, and quartz, displays extraordinary texture strength of muscovite, exceeding 100 multiples of random distribution (m.r.d.) for (001) pole figures and thus setting a new record for preferred orientation in rocks. Quantitative texture analysis was performed with the Rietveld method on synchrotron X-ray diffraction images. Interestingly, quartz also displays strong shape preferred orientation (SPO) as revealed by X-ray microtomography and SEM imaging but largely random crystallographic preferred orientation (CPO). In conclusion, microstructural evidence suggests that this fine-grained rock formed by recrystallization of shale under stress, with growth of phyllosilicates and dissolution and growth of quartz.

58 GEOSCIENCES↗

Crystal orientations in nacreous layers of organic-inorganic biocomposites

Abalone shell comprises a bio-composite material, combining the properties of inorganic calcite intergrown with organic nacre. This paper reports about the microstructure of this composite. By examining the Kikuchi patterns obtained for nacre (Haliotis discus hannai) using transmission electron microscopy, we have shown that the tiles within nacre have specific orientations. The stereographic projection spheres for the tiles of nacre can be divided into two main types, namely a right oriented region and a left oriented region with respect to the c axis as a reference plane (001). The cluster character of nacre can be explained in terms of the growth mechanism of the 'Christmas tree' pattern. The orientation of the c-axis in the nacreous layer is elucidated for the first time. We demonstrate the use of the soluble protein obtained from the tiles of nacre in in vitro calcium carbonate crystallization.

36 MATERIALS SCIENCE↗

Dependence of texture evolution on initial orientation in drawn single crystal copper

The evolution of fiber texture in the drawn single crystal copper wires with initial orientations of < 100>, < 110> and < 111> parallel to axis direction has been studied via electron backscattering diffraction. During cold drawing process, grain subdivision takes place in the < 100>, < 110> and < 111> single crystals. At high strains, a mixture of < 111> and < 100> fiber textures forms, but due to uneven shear strain, the distribution of the < 111> and < 100> fiber textures is inhomogeneous along the radial direction of wires. The < 111> fiber texture component is located in the centre of wires and < 100> is near the surface. Although grain subdivision appears in the < 100>, < 110> and < 111> single crystals, the stability of the three initial orientations is different. The initial orientations of < 100> and < 111> are more stable than < 110>. < 100> is stable at low strains while < 111> becomes stable at high strains. - Research Highlights: {yields} In drawn < 111> and < 100> single crystals, grain subdivision still takes place. {yields} The initial orientations of < 111> and < 100> more stable than < 110>. {yields} < 100> fiber texture located near the surface and < 111> in the centre. {yields} < 100> is stable at low strains but < 111> becomes stable at high strains.

36 MATERIALS SCIENCE↗

(110) Orientation growth of magnetic metal nanowires with face-centered cubic structure using template synthesis technique

A template-assisted assembly technique has been used to synthesize magnetic metal nanowire arrays. Fe, Co, Ni nanowires are fabricated using direct-current electrodeposition in the pores of anodic alumina membranes. The morphology and the crystal structure of the samples are characterized by field-emission scanning electron microscopy, transmission electron microscopy, and X-ray diffractometer. The results indicate that Fe, Co, and Ni nanowires all have face-centered cubic (FCC) structure and a preferred orientation along the [110] direction. The ability to prepare well-defined orientation growth of magnetic metal nanowires with FCC structure opens up new opportunities for both fundamental studies and nanodevice applications. - Research Highlights: {yields} Fe, Co, and Ni nanowires are fabricated in the AAM templates by electrodeposition. {yields} Well-defined orientation growth of the nanowires with FCC structure were investigated. {yields} The electrodeposition parameters affect the crystal structure and growth orientation.

36 MATERIALS SCIENCE↗

Effect of grain orientation on mechanical properties and thermomechanical response of Sn-based solder interconnects

The thermomechanical response of Sn-based solder interconnects with differently oriented grains was investigated by electron backscattered diffraction technique under thermal cycling and thermal shock testing in this study. The results showed that deformation and cracking of solder interconnects have a close relationship with the unique characteristics of grain orientation and boundaries in each solder interconnect, and deformation was frequently confined within the high-angle grain boundaries. The micro Vickers hardness testing results showed that the hardness varied significantly depending on the grain orientation and structure, and deformation twins can be induced around the indents by the indentation testing. - Highlights: • Thermomechanical response shows a close relationship with the grain structure. • Deformation was frequently confined within the high-angle grain boundaries. • Different grain orientations exhibit different hardness. • Deformation twins can be induced around the indents in SAC105 solder interconnects.

36 MATERIALS SCIENCE↗

Study on the crystallographic orientation relationship and formation mechanism of reversed austenite in economical Cr12 super martensitic stainless steel

Effect of carbides and crystallographic orientation relationship on the formation mechanism of reversed austenite of economical Cr12 super martensitic stainless steel (SMSS) has been investigated mainly by transmission electron microscopy (TEM) and electron backscatter diffraction (EBSD). The results indicate that the M{sub 23}C{sub 6} precipitation and the formation of the reversed austenite have the interaction effect during tempering process in SMSS. The reversed austenite forms intensively at the sub-block boundary and the lath boundary within a misorientation range of 0–60°. M{sub 23}C{sub 6} has the same crystallographic orientation relationship with reversed austenite. There are two different kinds of formation modes for reversed austenite. One is a nondiffusional shear reversion; the other is a diffusion transformation. Both are strictly limited by crystallographic orientation relationship. The austenite variants are limited to two kinds within one packet and five kinds within one prior austenite grain. - Highlights: • Reversed austenite forms at martensite boundaries with misorientation of 0–60° • M{sub 23}C{sub 6} precipitation and reversed austenite formation have the interaction effect. • Two austenite variants with different orientations can be formed inside a packet. • Two reversed austenite formation modes: shear reversion; diffusion transformation.

36 MATERIALS SCIENCE↗

Microscopic vertical orientation of nano-interspaced graphene architectures in deposit films as electrodes for enhanced supercapacitor performance

This paper reported a novel two-step process to fabricate high-performance supercapacitor films that contain microscale domains of nano-interspaced, re-stacked graphene sheets oriented perpendicular to the surface of current collector substrate, i.e., carbon fiber paper. In the two-step process, we first used ligand molecules to modify the surface of graphene oxide (GO) sheets and manipulate the interspacing between the re-stacked GO sheets. The ligand-modified GOs, i.e., m-GOs, were then reduced to obtain more conductive graphene (m-rGO), where X-ray diffraction measurement results indicated well-controlled interlayer spacing between the restacked m-rGO sheets up to 1 nm. The typical lateral dimension of the restacked m-rGO sheets were ~40 µm. Then, electrical field was introduced during m-rGO slurry deposition process to induce the vertical orientation of the m-rGO sheets/stacks in the film deposit. The direct current electrical field induced the orientation of the domains of m-rGO stacks along the direction perpendicular to the surface of deposit film, i.e., direction of electric field. Also, the applied electric field increased the interlayer spacing further, which should enhance the diffusion and accessibility of electrolyte ions. As compared with the traditionally deposited “control” films, the field-processed film deposits that contain oriented structure of graphene sheets/stacks have shown up to ~1.6 times higher values in capacitance (430 F/g at 0.5 A/g) and ~67% reduction in equivalent series resistance. Finally, the approach of using electric field to tailor the microscopic architecture of graphene-based deposit films is effective to fabricate film electrodes for high performance supercapacitors.

36 MATERIALS SCIENCE↗

Toward Continuous, Oriented Covalent Organic Framework Membranes for Precise Molecular Separations

The goal of achieving energy-efficient, precise molecular separations has motivated interest in developing and employing porous crystalline frameworks as membrane materials. Covalent organic frameworks (COFs) are ordered crystalline matrices composed of covalently bonded organic monomers and are synthesized via reversible reticular chemistry. COFs possess high porosity, structural tunability, and chemical and thermal stability, making them ideally suited for emerging, high-value membrane separation processes, such as ion separations, organic solvent nanofiltration, and gas separations. Although a range of COF membranes have been fabricated and tested in the past decade, these membranes are primarily polycrystalline, weakly crystalline, and/or discontinuous, resulting in suboptimal performance. In this review, we identify the properties that make COFs well-suited as membrane materials, while critically outlining the shortcomings of existing disordered COF membranes. We then highlight the recent emergence of highly crystalline, continuous, oriented two-dimensional COF membranes as a promising path forward for highly selective molecular separations. These continuous, oriented COF membranes exhibit tunable one-dimensional nanochannels, allowing for ultrafast molecular transport and precise species selectivity, thereby expanding the set of separations that can be practically achieved with membrane systems. We discuss synthesis and modification techniques that result in continuous, oriented COF membranes and evaluate the performance of such membranes for a variety of molecular separations. We conclude by identifying ongoing challenges in the development of COF membranes and outlining the future of their applications in molecular separations, which will necessarily rely on advancements in the synthesis of continuous, oriented membranes.

COF modification↗

Atomic Alignment in PbS Nanocrystal Superlattices with Compact Inorganic Ligands via Reversible Oriented Attachment of Nanocrystals

Nanocrystals (NCs) serve as versatile building blocks for the creation of functional materials with NC self-assembly offering opportunities to enable novel material properties. Here, in this work, we demonstrate that PbS NCs functionalized with strongly negatively charged metal chalcogenide complex (MCC) ligands, such as Sn 2 S 6 4– and AsS 4 3– , can self-assemble into all-inorganic superlattices with both long-range superlattice translational and atomic-lattice orientational order. Structural characterizations reveal that the NCs adopt an unexpected edge-to-edge alignment, and numerical simulation clarifies that orientational order is thermodynamically stabilized by many-body ion correlations originating from the dense electrolyte. Furthermore, we show that the superlattices of Sn 2 S 6 4– -functionalized PbS NCs can be fully disassembled back into the colloidal state, which is highly unusual for orientationally attached superlattices with atomic-lattice alignment. The reversible oriented attachment of NCs, enabling their dynamic assembly and disassembly into effectively single-crystalline superstructures, offers a pathway toward designing reconfigurable materials with adaptive and controllable electronic and optoelectronic properties.

Landau-Ginzburg theory↗

Shear-Induced Orientation in Well-Exfoliated Polystyrene/Clay Nanocomposites

We report measurements of shear-induced particle orientation in highly exfoliated polystyrene/clay nanocomposites. Samples were prepared using an in situ polymerization technique, in which native clay is organically modified with a cationic surfactant that incorporates a polymerizable vinylbenzyl moiety. Controlled radical polymerization was used during the synthesis to limit the molecular weight and polydispersity of the nanocomposite polymer matrix. Flow-induced orientation was measured in the flow-gradient plane of shear flow using synchrotron-based small-angle X-ray scattering. Despite the small rotational diffusivity expected for the clay particles, significant particle orientation was only observed at relatively high rates in steady shear or at high frequencies in large-amplitude oscillatory shear. Measurements of orientation upon flow cessation provided direct evidence of a structural relaxation process that was orders of magnitude faster than estimates of rotational Brownian motion. It is suggested that this fast relaxation arises from either relaxation of shear-induced distortion of partially flexible exfoliated clay sheets in a highly entangled nanoparticle network or coupling of particle and polymer dynamics.

36 MATERIALS SCIENCE↗

Orientation epitaxy of Ge 1–x Sn x films grown on single crystal CaF 2 substrates

Ge 1–x Sn x films were grown via physical vapor deposition below the crystallization temperature of Ge on single crystal (111) and (100) CaF 2 substrates to assess the role of Sn alloying in Ge crystallization. By studying samples grown at several growth temperatures ranging from 250 °C to 400 °C we report temperature-dependent trends in several of the films' properties. X-ray diffraction theta vs. two-theta (θ/2θ) scans indicate single orientation Ge 1–x Sn x (111) films are grown on CaF 2 (111) substrates at each temperature, while a temperature-dependent superposition of (111) and (100) orientations are exhibited in films grown on CaF2(100) above 250 °C. This is the first report of (111) oriented Ge 1–x Sn x grown on a (100) oriented CaF 2 substrate, which is successfully predicted by a superlattice area matching model. These results are confirmed by X-ray diffraction pole figure analysis. θ/2θ results indicate substitutional Sn alloying in each film of about 5%, corroborated by energy dispersive spectroscopy. In addition, morphological and electrical properties are measured by scanning electron microscopy, atomic force microscopy and Hall mobility measurements and are also shown to be dependent upon growth temperature.

36 MATERIALS SCIENCE↗

Morphology, Orientation Relationship and Stability Analysis of Cu2O nanoclusters on SrTiO3 (100)

Reflection high energy electron diffraction (RHEED), atomic force microscopy (AFM) and theoretical studies based on classical nucleation theory have been used to understand the morphology, orientation relationship and stability of Cu2O nanoclusters on SrTiO3 (100) (STO). We propose that the competing interfacial and elastic energies facilitate an in-plane rotation of the Cu2O clusters by 45o with respect to the STO substrate and stabilize Cu2O clusters on STO(100) with an orientation relationship of (001) Cu 2o //(001) SrTiO3 and <100> Cu 2o //<110> SrTiO3. Preliminary theoretical analysis also suggests that this particular orientation results in smaller critical nucleus sizes and lower nucleation barriers. The study also indicates a chemical potential (growth rate) dependence of the orientation relationship.

36 MATERIALS SCIENCE↗