Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “orientational order”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24
All sourcesNASA NTRSDOE OSTI
NASA NTRS1977

Concatenated coding systems employing a unit-memory convolutional code and a byte-oriented decoding algorithm

Concatenated coding systems utilizing a convolutional code as the inner code and a Reed-Solomon code as the outer code are considered. In order to obtain very reliable communications over a very noisy channel with relatively modest coding complexity, it is proposed to concatenate a byte-oriented unit-memory convolutional code with an RS outer code whose symbol size is one byte. It is further proposed to utilize a real-time minimal-byte-error probability decoding algorithm, together with feedback from the outer decoder, in the decoder for the inner convolutional code. The performance of the proposed concatenated coding system is studied, and the improvement over conventional concatenated systems due to each additional feature is isolated.

Lee, L.-N.↗
NASA NTRS1984

Compressional features in the Tharsis Region of Mars: Orientations and Timing of Deformation

The Tharsis ridge system appears to form a great circle around the major volcanoes. The roughly circumferential orientation of these ridges could be interpreted as the formation of a ridge system in response to a single stress field with a center near Pavonis Mons. Wise, et al. (1979) plotted the perpendiculars to strikes of ridges on the eastern flanks of Tharsis as great circles on the upper hemisphere of an equal area net. In order to further test for circular symmetry and possible other influences on ridge orientations, normals to vector means of ridge orientations were calculated using over 1850 digitized ridge segments sampled in 10 degree boxes. Orientations of individual ridge segments were weighted by their lengths, and the magnitudes of normals to vectors means were weighted by cummulative length of the ridge segments. Normals to vector means with magnitudes less than 100 km are not shown. Assuming a single fold origin for ridges, the resulting plot shows compressive stress trajectories for the ridges in the Tharsis region. The averaged compressive stress orientation around Tharsis confirm the suggestion by Wise, et al. that the ridge system is not concentric to any single point.

Watters, T. R.↗
NASA NTRS2005

[Ti II] and [Ni II] Emission from the Strontium Filament of eta Carinae

We study the nature of the [Ti II] and [Ni II] emission from the so-called strontium filament found in the ejecta of eta Carinae. To this purpose we employ multilevel models of the Ti II and Ni II systems which are used to investigate the physical condition of the filament and the excitation mechanisms of the observed lines. For the Ti II ion, for which no atomic data was previously available, we carry out ab initio calculations of radiative transition rates and electron impact excitation rate coefficients. It is found that the observed spectrum is consistent with the lines being excited in a mostly neutral region with electron density of the order of 10(exp 7) cm(exp -3) and a temperature around 6000 K. In analyzing three observations with different slit orientations recorded between March 2000 and November 2001 we find line ratios that change among various observations, in a way consistent with changes of up to an order of magnitude in the strength of the continuum radiation field. These changes result from different samplings of the extended filament, due to the different slit orientations used for each observation, and yield clues on the spatial extent and optical depth of the filament. The observed emission indicates a large Ti/Ni abundance ratio relative to solar abundances. It is suggested that the observed high Ti/Ni ratio in gas is caused dust-gas fractionation processes and does not reflect the absolute Ti/Ni ratio in the ejecta of eta Carinae. The condensation chemistry shows that if dust condensed in a sequence of layers according to decreasing temperature and increasing distance from the central star, the most refractory dust could be selectively affected by photoevaporation. Thus, Ti would be released back to the gas and the Ti/Ni ratio in the gas would increase to the observed super-solar ratio.

Bautista, M. A.↗
NASA NTRS2007

[Ti II] and [Ni II] Emission from the Strontium Filament of eta Carinae

We study the nature of the [Ti II] and [Ni II] emission from the so-called strontium filament found in the ejecta of eta Carinae. To this purpose we employ multilevel models of the Ti II and Ni II systems which are used to investigate the physical condition of the filament and the excitation mechanisms of the observed lines. For the Ti II ion, for which no atomic data was previously available, we carry out ab initio calculations of radiative transition rates and electron impact excitation rate coefficients. It is found that the observed spectrum is consistent with the lines being excited in a mostly neutral region with an electron density of the order of 10(exp 7) per cubic centimeter and a temperature around 6000 K. In analyzing three observations with different slit orientations recorded between March 2000 and November 2001 we find line ratios that change among various observations, in a way consistent with changes of up to an order of magnitude in the strength of the continuum radiation field. These changes result from different samplings of the extended filament, due to the different slit orientations used for each observation, and yield clues on the spatial extent and optical depth of the filament. The observed emission indicates a large Ti/Ni abundance ratio relative to solar abundances. It is suggested that the observed high Ti/Ni ratio in gas is caused by dust-gas fractionation processes and does not reflect the absolute Ti/Ni ratio in the ejecta of eta Carinae. We study the condensation chemistry of Ti, Ni and Fe within the filament and suggest that the observed gas phase overabundance of Ti is likely the result of selective photo-evaporation of Ti-bearing grains. Some mechanisms for such a scenario are proposed.

Bautista, M. A.↗
NASA NTRS1989

Kinematic sensitivity of robot manipulators

Kinematic sensitivity vectors and matrices for open-loop, n degrees-of-freedom manipulators are derived. First-order sensitivity vectors are defined as partial derivatives of the manipulator's position and orientation with respect to its geometrical parameters. The four-parameter kinematic model is considered, as well as the five-parameter model in case of nominally parallel joint axes. Sensitivity vectors are expressed in terms of coordinate axes of manipulator frames. Second-order sensitivity vectors, the partial derivatives of first-order sensitivity vectors, are also considered. It is shown that second-order sensitivity vectors can be expressed as vector products of the first-order sensitivity vectors.

Vuskovic, Marko I.↗
NASA NTRS1992

Polarimetric signatures of a canopy of dielectric cylinders based on first and second order vector radiative transfer theory

Complete polarimetric signatures of a canopy of dielectric cylinders overlying a homogeneous half space are studied with the first and second order solutions of the vector radiative transfer theory. The vector radiative transfer equations contain a general nondiagonal extinction matrix and a phase matrix. The energy conservation issue is addressed by calculating the elements of the extinction matrix and the elements of the phase matrix in a manner that is consistent with energy conservation. Two methods are used. In the first method, the surface fields and the internal fields of the dielectric cylinder are calculated by using the fields of an infinite cylinder. The phase matrix is calculated and the extinction matrix is calculated by summing the absorption and scattering to ensure energy conservation. In the second method, the method of moments is used to calculate the elements of the extinction and phase matrices. The Mueller matrix based on the first order and second order multiple scattering solutions of the vector radiative transfer equation are calculated. Results from the two methods are compared. The vector radiative transfer equations, combined with the solution based on method of moments, obey both energy conservation and reciprocity. The polarimetric signatures, copolarized and depolarized return, degree of polarization, and phase differences are studied as a function of the orientation, sizes, and dielectric properties of the cylinders. It is shown that second order scattering is generally important for vegetation canopy at C band and can be important at L band for some cases.

Tsang, Leung↗
DOE OSTI2025

On-Demand Selection of the Latent Domain Orientation in Spray-Deposited Block Copolymer Thin Films

With their ability to self-assemble spontaneously into well-defined nanoscale morphologies, block copolymer (BCP) thin films are a versatile platform to fabricate functional nanomaterials. An important challenge to wider deployment of BCPs in nanofabrication is combining precise control over the nanoscale domain orientation in BCP assemblies with scalable deposition techniques that are applicable to large-area, curved, and flexible substrates. Here, in this study, we show that spray-deposited smooth films of a nominally disordered BCP exhibit latent orientations, which can be prescriptively selected by controlling solvent evaporation during spray casting. Subsequent solvent vapor annealing triggers assembly toward highly ordered cylindrical morphologies along the pathway determined by solvent evaporation in the prior spray deposition stage. Faster evaporation promotes assembly of vertically oriented cylinders spanning the entire film thickness (100–300 nm). In comparison, slow solvent evaporation permits intermicellar aggregation and incipient cylinder formation in solution, which induces horizontal cylinder assembly upon annealing. The evaporatively controlled latent orientation mechanism presented herein elucidates how nonequilibrium phenomena during casting govern successive self-assembly pathways and facilitates a versatile method to dictate the domain orientation of BCP thin films on demand on flexible and highly curved substrates or in distinct pattern areas on the same substrate.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Design of a Combined Proportional Integral Derivative Controller to Regulate the Temperature Inside a High-Temperature Tubular Solar Reactor

Solar fuels are proven to be promising candidates for thermochemical energy storage. However, the transient nature of solar radiation is an obstacle to maintaining a stable operational temperature inside a solar reactor. To overcome this challenge, the temperature of a solar reactor can be regulated by controlling the incoming solar radiation or the feedstock flowrate inside the reactor. In this work, a combined proportional integral derivative (PID) controller is implemented to regulate the temperature inside a high-temperature tubular solar reactor with counter-current flowing gas/particles. The control model incorporates two control systems to regulate incoming solar radiation and gas flow simultaneously. The design of the controller is based on a reduced-order numerical model of a high-temperature tubular solar reactor that is vertically oriented with an upward gas flow and downward particle flow. The reactor receives heat circumferentially through its wall over a finite segment of its length. Formulation of the heat transfer model is presented by applying the energy balance for the reactor tube and considering heat and mass transfer inside. A set of governing differential equations are solved numerically by using the finite volume method to obtain reactor wall, particles, and gas temperatures along the reactor length with various boundary conditions. Simulation results are used to tune the PID controller parameters by utilizing the Ziegler–Nichols tuning method. Both the simulation results and the controller performance are visualized on the LABVIEW platform. The controller is challenged to track different temperature setpoints with different scenarios of transient solar radiation. Here, the performance of the PID controller was compared to experimental results obtained from an industrial PID controller embedded in a 7 kW electric furnace. Results show that the combined PID controller is successful in maintaining a stable temperature inside the reactor by regulating the incoming solar radiation and the flowrate via small steady-state error and reasonable settling time and overshoot.

14 SOLAR ENERGY↗
NASA NTRS1987

Motions in fluids caused by microgravitational acceleration and their modification by relative rotation

The primary reason for conducting many materials science experiments in space is to minimize or eliminate undesirable effects that might result because of convective motions in fluids which are driven by buoyancy effects. Of particular interest are the low-frequency accelerations caused by the earth's gravity gradient field, spacecraft attitude motions, and atmospheric drag, since it is known that these can give rise to sustained fluid motion. In order to gain a limited understanding of the effects of these accelerations their magnitude and orientation have been examined, and the Stokes' motion of a spherical particle in a fluid has been calculated for various types of spacecraft attitude motions. In addition, the effect of slowly rotating the experimental system relative to the spacecraft (in order to increase the residence time of the particle in the neighborhood of its initial position) is assessed.

Alexander, J. Iwan D.↗
NASA NTRS1972

A magnetic control system for attitude acquisition

A spacecraft magnetic attitude acquisition system is reported that is capable of automatically despinning a satellite from arbitrarily high rates around any axis and provides terminal orientation that makes capture by conventional fine control attitude control systems routine. The system consists of a 3-axis magnetometer, a set of 3 orthogonal magnets, and appropriate control logic. A well-configured system results in despin times of the order of 5 orbits per rpm for spacecraft in low earth orbits. Following despin, terminal orientation is achieved after another one to three orbits, depending on the capture range of the associated fine control system.

Stickler, A. C.↗
DOE OSTI2024

Dynamic Nanocrystal Superlattices with Thermally Triggerable Lubricating Ligands

The size-dependent and collective physical properties of nanocrystals (NCs) and their self-assembled superlattices (SLs) enable the study of mesoscale phenomena and the design of metamaterials for a broad range of applications. However, the limited mobility of NC building blocks in dried NCSLs often hampers the potential for employing postdeposition methods to produce high-quality NCSLs. In this study, we present tailored promesogenic ligands that exhibit a lubricating property akin to thermotropic liquid crystals. The lubricating ability of ligands is thermally triggerable, allowing the dry solid NC aggregates deposited on the substrates with poor ordering to be transformed into NCSLs with high crystallinity and preferred orientations. The interplay between the dynamic behavior of NCSLs and the molecular structure of the ligands is elucidated through a comprehensive analysis of their lubricating efficacy using both experimental and simulation approaches. Coarse-grained molecular dynamic modeling suggests that a shielding layer from mesogens prevents the interdigitation of ligand tails, facilitating the sliding between outer shells and consequently enhancing the mobility of NC building blocks. Further, the dynamic organization of NCSLs can also be triggered with high spatial resolution by laser illumination. The principles, kinetics, and utility of lubricating ligands could be generalized to unlock stimuli-responsive metamaterials from NCSLs and contribute to the fabrication of NCSLs.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2025

Observation of odd-parity superconductivity in UTe 2

Symmetry properties of the order parameter are among the most fundamental characteristics of a superconductor. UTe 2 , which was found to feature an exceedingly large upper critical field and striking reentrant behavior at low temperatures, is widely believed to possess a spin-triplet pairing symmetry. However, unambiguous evidence for such a pairing symmetry is still lacking, especially at zero and low magnetic fields. The presence of an inversion crystalline symmetry in UTe 2 requires that, if it is indeed a spin-triplet superconductor, the order parameter must be of odd parity. We report here phase-sensitive measurements of the symmetry of the orbital part of the order parameter using the Josephson effect. The selection rule in the orientation dependence of the Josephson coupling between In, an s -wave superconductor, and UTe 2 suggests strongly that UTe 2 possesses the odd-parity pairing state of B 1 u symmetry near zero magnetic field, making it a spin-triplet superconductor. We also report the apparent formation of Andreev surface bound states on the (1−10) surface of UTe 2 .

Li, Zixuan (ORCID:0009000572025666)↗
NASA NTRS1976

Textural remanence - A new model of lunar rock magnetism

In reexamining the accumulated magnetic data on lunar rocks, several common patterns of magnetic behavior are recognized. Their joint occurrence strongly suggests a new model of lunar rock magnetism, which is based on partial preferred textural alignment of the spontaneous moments of magnetic grains without requiring the existence of ancient lunar magnetic fields. This magnetic fabric, mimetic to locally oriented petrofabric, gives rise to an apparent 'textural remanent magnetization'. In order to account for the observed intensity of 'stable remanence' in lunar rocks, only a minute fraction (0.001 to 0.00001) of the single-domain iron grains present need be preferentially aligned. Several mechanisms operating on the lunar surface, including shock and diurnal thermal cycling, appear adequate for producing the required type and degree of magnetic alignment in all lunar rock classes. The model is supported by a wide variety of direct and indirect evidence, and its predictions (e.g., regarding anisotropic susceptibility and remanence acquisition) can be experimentally tested.

Brecher, A.↗
NASA NTRS1982

The thickness of the magnetopause current layer - ISEE 1 and 2 observations

ISEE 1 and 2 magnetometer data over the dayside magnetosphere are analyzed to present a global survey of the magnetopause thickness. It is shown that earlier magnetopause velocities have been somewhat underestimated, with results indicating constant rapid and irregular motion and velocities ranging from 10-80 km/s in 80% of the cases. The magnetopause thickness is found to be between 400-1000 km, with larger thicknesses also observed, and the thickness does not seem to depend on the orientation of the magnetosheath magnetic field, but does appear to be ordered by dipole magnetic latitude so that the magnetopause current sheet is thinnest near the magnetic equator, which suggests that reconnection is initiated in the equatorial regions rather than in the polar cusps.

Berchem, J.↗
NASA NTRS1987

A thermodynamic model of the Hg(0.8)Cd(0.2)Te-iodine transport system. I - Te-saturated source material. II - Source material composition within the homogeneity range

A thermochemical analysis of the Hg(0.8)Cd(0.2)Te-iodine vapor transport system is presented, and theoretical calculations of diffusion-controlled mass transport rates are made. The predicted mass fluxes are compared with experimental data obtained from transport experiments under vertical, stabilizing conditions reported earlier and with results of additional transport experiments conducted during the present study. Experimental mass transport rate studies of the transport system for fixed amount of excess Hg as a function of transport agent pressure are presented. The mass fluxes are determined for the vertical, stabilizing orientation of the density gradient relative to the gravitational vector. In order to compare experimental mass transport rates with computed values, the thermochemical analysis is extended to take the formation of Hg vacancies in the above compound into account along with their effect on the partial pressure of the system.

Chandra, D.↗
NASA NTRS1992

Computation of three-dimensional effects on two dimensional wings

A 2-D numerical investigation was performed to determine the effect of a Gurney flap on a NACA 4412 airfoil. A Gurney flap is a flat plate on the order of 1 to 3 percent of the airfoil chord length, oriented perpendicular to the airfoil chord line and located at the trailing edge of the airfoil. An incompressible Navier Stokes code, INS2D, was used to calculate the flow field about the airfoil. The fully turbulent results were obtained using the Baldwin-Barth one-equation turbulence model. Gurney flap sizes of 0.5, 1, 1.25, 1.5, 2, and 3 percent of the airfoil chord were studied. Computational results were compared with experimental results where possible. The numerical solutions show that the Gurney flap increases airfoil lift coefficient with only a slight increase in drag coefficient. Use of a 1.5 percent chord Gurney flap increases the maximum lift coefficient by approximately 0.3 and decreases the angle of attack for a given lift coefficient by more than 3 degrees. The numerical solutions exhibit detailed flow structures at the trailing edge and provide a possible explanation for the increased aerodynamic performance.

Cummings, Russell M.↗
NASA NTRS1992

Computational evaluation of an airfoil with a Gurney flap

A 2D numerical investigation was performed to determine the effect of a Gurney flap on a NACA 4412 airfoil. A Gurney flap is a flat plate on the order of 1 to 3 percent of the airfoil chord length, oriented perpendicular to the airfoil chord line and located at the trailing edge of the airfoil. An incompressible Navier Stokes code, INS2D, was used to calculate the flow field about the airfoil. The fully turbulent results were obtained using the Baldwin-Barth one-equation turbulence model. Gurney flap sizes of 0.5 , 1, 1.25, 1.5, 2, and 3 percent of the airfoil chord were studied. Computational results were compared with experimental results where possible. The numerical solutions show that the Gurney flap increases airfoil lift coefficient with only a slight increase in drag coefficient. Use of a 1.5 percent chord Gurney flap increases the maximum lift coefficient by approximately 0.3 and decreases the angle of attack for a given lift coefficient by more than 3 deg. The numerical solutions exhibit detailed flow structures at the trialing edge and provide a possible explanation for the increased aerodynamic performance.

Jang, Cory S.↗
NASA NTRS1993

Magnetic record in chondrite meteorites

What we know about the magnetic record in chondrite meteorites based on new data and previously published results is summarized. Strips from thin slabs of chondrite meteorites were cut into near cubical subsamples (several mm on edge) numbering approximately 60 to approximately 120 per meteorite. A common orientation was assigned to each subsample from a given meteorite in order to ensure that we could discover the vector makeup of the bulk meteorite. The new data set includes: Shaw (L7), Roy (L5/6), Claytonville (L5), Plainview (H5), Etter (H5), Leoville (C3V), and Allende (C3V). In addition to these new results, literature data of sufficient detail, e.g. Bjurbole (L4), ALH769 (L6), Abee (E4), Allende (C3V), and Olivenza (L5), is considered.

Wasilewski, P. J.↗