Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “nitrides”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

Enhanced non-radiative energy transfer in hybrid III-nitride structures

The effect of surface states has been investigated in hybrid organic/inorganic white light emitting structures that employ high efficiency, nearfield non-radiative energy transfer (NRET) coupling. The structures utilize blue emitting InGaN/GaN multiple quantum well (MQW) nanorod arrays to minimize the separation with a yellow emitting F8BT coating. Surface states due to the exposed III-nitride surfaces of the nanostructures are found to reduce the NRET coupling rate. The surface states are passivated by deposition of a silicon nitride layer on the III-nitride nanorod surface leading to reduced surface recombination. A low thickness surface passivation is shown to increase the NRET coupling rate by 4 times compared to an un-passivated hybrid structure. A model is proposed to explain the increased NRET rate for the passivated hybrid structures based on the reduction in surface electron depletion of the passivated InGaN/GaN MQW nanorods surfaces.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Kinetic modelling of chlorination of nitrided ilmenite using MATLAB

In the present study, chlorination of nitride ilmenite using 2{sup k} factorial design was investigated. The reduction experiments were carried out in a temperature range of 400°C to 500°C, chlorination duration from 1 hour to 3 hours and using different type of carbon reactant. Phases of raw materials and reduced samples were analyzed by X-ray diffraction (XRD). Ilmenite was reduced to TiO{sub x}C{sub y}N{sub z} through carbothermal and nitridation for further chlorination into titanium tetrachloride. The Design of Experiment analysis suggested that the types of carbon reactant contribute most influence to the extent of chlorination of nitride ilmenite. The extent of chlorination was highest at 500°C with 3 hours chlorination time and carbon nanotube as carbon reactant.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electronic structure of silicon nitride according to ab initio quantum-chemical calculations and experimental data

Charge transfer {Delta}Q = 0.35e at the Si-N bond in silicon nitride is determined experimentally using photoelectron spectroscopy, and the ionic formula of silicon nitride Si{sub 3}{sup +1.4}N{sub 4}{sup -1.05} is derived. The electronic structure of {alpha}-Si{sub 3}N{sub 4} is studied ab initio using the density functional method. The results of calculations (partial density of states) are compared with experimental data on X-ray emission spectroscopy of amorphous Si{sub 3}N{sub 4}. The electronic structure of the valence band of amorphous Si{sub 3}N{sub 4} is studied using synchrotron radiation at different excitation energies. The electron and hole effective masses m{sub e}{sup *} {approx} m{sub h}{sup *} {approx} 0.5m{sub e} are estimated theoretically. The calculated values correspond to experimental results on injection of electrons and holes into silicon nitride.

74 ATOMIC AND MOLECULAR PHYSICS↗

Nitridation of an unreconstructed and reconstructed (√31 ×√31)R ± 9° (0001) sapphire surface in an ammonia flow

This paper is devoted to the study of the nitridation of unreconstructed and reconstructed (√31 ×√31)R ± 9° (0001) sapphire surfaces in an ammonia flow by reflection high-energy electron diffraction (RHEED). The experimental results show that sapphire nitridation occurs on the unreconstructed (1 × 1) surface, which results in AlN phase formation on the substrate surface. However, if sapphire nitridation is preceded by high-temperature annealing (1150°C) resulting in sapphire surface reconstruction with formation of the (√31 ×√31)R ± 9° surface, the crystalline AlN phase on the sapphire surface is not formed during surface exposure to an ammonia flow.

36 MATERIALS SCIENCE↗

Simulation and Experimental Studies of Illumination Effects on the Current Transport of Nitridated GaAs Schottky Diode

In this paper, we studied the electrical characteristic of Schottky diodes based on gold contact on nitridated GaAs substrates. The used (100) GaAs substrate is n-type with concentration of N{sub d} = 4.9 × 10{sup 15} cm{sup –3}. Nitridation process was performed using a N2 glow discharge source (GDS) creating N atomic species. A ultra-thin film with a thickness of 2.2 nm GaN is performed on GaAs surface. In order to study the electric characteristics under illumination, we use of a He–Ne laser of 1 mW power and 632.8 nm wavelength. The current–voltage (I–V) of the Au/GaN/GaAs structures was investigated at room temperature. The saturation current I{sub S}, the series resistance R{sub S} and the mean ideality factor n are, respectively, equal to 4.46 × 10{sup –07} A, 172 Ohm, 1.4 in the dark and to 5.64 × 10{sup –07} A, 148 Ohm, 1.21 under illumination. To analyze these results, a 1D-simulation code of forward and reverse current–voltage characteristics versus the critical parameters of a nitridated GaAs Schottky diode is implemented. The algorithm is based on the solution of the system composed by Poisson’s and continuities equations. In this calculation, we take into account the existence of the GaN layer and the localization of traps states in the perturbed interface. We have considered the W-shaped and U-shaped distribution of traps states in the band gap. The effects of the doping concentration of GaAs, the traps states density, light intensities and the work function of gold ϕ{sub m} are investigated. By fitting the experimental curve, we can deduce the values of the traps states and the exact value of the work function of gold, and consequently we validate the developed model.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Optical and Electrical Properties of III-Nitrides and Related Materials

Among the members of the III-nitride material system, boron-nitride (BN) is the least studied and understood. Its extraordinary physical properties, such as ultra-high chemical stability, thermal conductivity, electrical resistivity, band gap (Eg ~ 6 eV), and optical absorption near the band gap make hexagonal BN (h-BN) the material of choice for emerging applications such as deep ultraviolet (DUV) optoelectronic devices. Moreover, h-BN has a close lattice match to graphene and is the most suitable substrate and dielectric/separation layer for graphene electronics and optoelectronics. Similar to graphene, low dimensional h-BN is expected to possess rich new physics. Other potential applications include super-capacitors and electron emitters. However, our knowledge concerning the semiconducting properties of h-BN is very scarce. The project aims to extend our studies to the “newest” family member of the III-nitride material system, h-BN, and to address issues that have not yet been explored but are expected to profoundly influence our understanding on its fundamental properties and device applications. During the supporting period, we have improved the growth processes of h-BN epilayers by metal organic chemical vapor deposition (MOCVD), investigated the fundamental material properties, and identified several unique features of h-BN as well as critical issues that remain to be addressed.

36 MATERIALS SCIENCE↗

Nanostructural engineering of nitride nucleation layers for GaN substrate dislocation reduction.

With no lattice matched substrate available, sapphire continues as the substrate of choice for GaN growth, because of its reasonable cost and the extensive prior experience using it as a substrate for GaN. Surprisingly, the high dislocation density does not appear to limit UV and blue LED light intensity. However, dislocations may limit green LED light intensity and LED lifetime, especially as LEDs are pushed to higher current density for high end solid state lighting sources. To improve the performance for these higher current density LEDs, simple growth-enabled reductions in dislocation density would be highly prized. GaN nucleation layers (NLs) are not commonly thought of as an application of nano-structural engineering; yet, these layers evolve during the growth process to produce self-assembled, nanometer-scale structures. Continued growth on these nuclei ultimately leads to a fully coalesced film, and we show in this research program that their initial density is correlated to the GaN dislocation density. In this 18 month program, we developed MOCVD growth methods to reduce GaN dislocation densities on sapphire from 5 x 10{sup 8} cm{sup -2} using our standard delay recovery growth technique to 1 x 10{sup 8} cm{sup -2} using an ultra-low nucleation density technique. For this research, we firmly established a correlation between the GaN nucleation thickness, the resulting nucleation density after annealing, and dislocation density of full GaN films grown on these nucleation layers. We developed methods to reduce the nuclei density while still maintaining the ability to fully coalesce the GaN films. Ways were sought to improve the GaN nuclei orientation by improving the sapphire surface smoothness by annealing prior to the NL growth. Methods to eliminate the formation of additional nuclei once the majority of GaN nuclei were developed using a silicon nitride treatment prior to the deposition of the nucleation layer. Nucleation layer thickness was determined using optical reflectance and the nucleation density was determined using atomic force microscopy (AFM) and Nomarski microscopy. Dislocation density was measured using X-ray diffraction and AFM after coating the surface with silicon nitride to delineate all dislocation types. The program milestone of producing GaN films with dislocation densities of 1 x 10{sup 8} cm{sup -2} was met by silicon nitride treatment of annealed sapphire followed by the multiple deposition of a low density of GaN nuclei followed by high temperature GaN growth. Details of this growth process and the underlying science are presented in this final report along with problems encountered in this research and recommendations for future work.

36 MATERIALS SCIENCE↗

Basal Plane Hydrogen Evolution Activity from Mixed Metal Nitride MXenes Measured by Scanning Electrochemical Microscopy

2D early transition metal carbide and nitride MXenes have intriguing properties for electrochemical energy storage and electrocatalysis. These properties can be manipulated by modifying the basal plane chemistry. Here, mixed transition metal nitride MXenes, M-Ti 4 N 3 T x (M = V, Cr, Mo, or Mn; T x = O and/or OH), are developed by modifying pristine exfoliated Ti 4 N 3 T x MXene with V, Cr, Mo, and Mn salts using a simple solution-based method. The resulting mixed transition metal nitride MXenes contain 6–51% metal loading (cf. Ti) that exhibit rich electrochemistry including highly tunable hydrogen evolution reaction (HER) electrocatalytic activity in a 0.5 m H 2 SO 4 electrolyte as follows: V-Ti 4 N 3 T x > Cr-Ti 4 N 3 T x > Mo-Ti 4 N 3 T x > Mn-Ti 4 N 3 T x > pristine Ti 4 N 3 T x with overpotentials as low as 330 mV at -10 mA cm -2 with a charge-transfer resistance of 70 O. Scanning electrochemical microscopy (SECM) reveals the electrochemical activity of individual MXene flakes. The SECM data corroborate the bulk HER activity trend for M-Ti 4 N 3 T x as well as provide the first experimental evidence that HER results from catalysis on the MXene basal plane. These electrocatalytic results demonstrate a new pathway to tune the electrochemical properties of MXenes for water splitting and related electrochemical applications.

2D materials↗

Nanometer Resolution Structure‐Emission Correlation of Individual Quantum Emitters via Enhanced Cathodoluminescence in Twisted Hexagonal Boron Nitride

Understanding the atomic structure of quantum emitters, often originating from point defects or impuritie, is essential for designing and optimizing materials for quantum technologies such as quantum computing, communication, and sensing. Despite the availability of atomic-resolution scanning transmission electron microscopy and nanoscale cathodoluminescence microscopy, experimentally determining the atomic structure of individual emitters is challenging due to the conflicting needs for thick samples to generate strong cathodoluminescence signals and thin samples for structural analysis. To overcome this challenge, significantly enhanced cathodoluminescence at twisted interfaces is leveraged to achieve sub-nanometer localization precision for the first time in mapping individual quantum emitters in carbon-implanted hexagonal boron nitride. This unprecedent spatial sensitivity, together with correlative electron energy loss spectroscopy quantitative scanning transmission electron microscopy imaging, and first principles density functional theory calculations, enables the identification of the atomic structure of the 440 nm blue emitter in hexagonal boron nitride as a substituted vertical carbon dimer. Building on the atomic structure insights, nanoscale spatially precise creation of blue emitters is demonstrated by electron beam irradiation of carbon-coated hexagonal boron nitride. This advancement in correlating atomic structures with optical properties lays the foundation for a deeper understanding and precise engineering of quantum emitters, significantly advancing the development of cutting-edge quantum information technologies.

2D material↗

Transition Metal Nitrides as Promising Catalyst Supports for Tuning CO/H 2 Syngas Production from Electrochemical CO 2 Reduction

The electrochemical carbon dioxide reduction reaction (CO 2 RR) to produce synthesis gas (syngas) with tunable CO/H 2 ratios has been studied by supporting Pd catalysts on transition metal nitride (TMN) substrates. Combining experimental measurements and density functional theory (DFT) calculations, Pd-modified niobium nitride (Pd/NbN) is found to generate much higher CO and H 2 partial current densities and greater CO Faradaic efficiency than Pd-modified vanadium nitride (Pd/VN) and commercial Pd/C catalysts. In-situ X-ray diffraction identifies the formation of PdH in Pd/NbN and Pd/C under CO 2 RR conditions, whereas the Pd in Pd/VN is not fully transformed into the active PdH phase. DFT calculations show that the stabilized *HOCO and weakened *CO intermediates on PdH/NbN are critical to achieving higher CO 2 RR activity. This work suggests that NbN is a promising substrate to modify Pd, resulting in an enhanced electrochemical conversion of CO 2 to syngas with a potential reduction in precious metal loading.

25 ENERGY STORAGE↗

Oxides and Nitrides with Asymmetric Pore Structure from Block Copolymer Co–Assembly and Non–Solvent Induced Phase Separation

Materials combining an asymmetric pore structure with mesopores everywhere enable high surface area accessibility and fast transport, making them attractive for e.g., energy conversion and storage applications. Block copolymer (BCP)/inorganic precursor co-assembly combined with non-solvent induced phase separation (NIPS) provides a route to materials in which a mesoporous top surface layer merges into an asymmetric support with graded porosity along the film normal and mesopores throughout. Here, the co-assembly and non-solvent-induced phase separation (CNIPS) of poly(isoprene)-b-poly(styrene)-b-poly(4-vinylpyridine) (ISV) triblock terpolymer and titanium dioxide (TiO 2 ) sol-gel nanoparticlesare reported. Heat-treatment in air results in free-standing asymmetric porous TiO 2 . Further thermal processing in ammonia results in free-standing asymmetric porous titanium nitride (TiN). processing changes alter structural membrane characteristics is demonstrated. Changing the CNIPS evaporation time results in various membrane cross-sections ( finger-like to sponge-like). Further, oxide and nitride material composition, crystallinity, and porosity are tuned by varying thermal processing conditions. Finally, thermal processing condition effects are probed on phase-pure asymmetric nitride membrane behavior using cyclic voltammetry to elucidate their influence, e.g., on specific capacitance. Results provide further insights into improving asymmetric and porous materials for applications including energy conversion and storage, separation, and catalysis and motivate a further expansion of CNIPS to other (in)organic materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Interaction mechanism of transition metal phthalocyanines on transition metal nitride supports

Here, we investigated the electronic interactions between transition metal phthalocyanine (TMPc’s) on a refractory transition metal nitride support, specifically copper phthalocyanine (CuPc) on titanium nitride (TiN). X-ray Photoelectron Spectroscopy (XPS) results suggest a presence of a few nanometer native oxide layer on the surface of the TiN nanoparticles, which consists of TiN, TiO 2 , and Titanium oxynitrides (Ti x O y N z ). A TiNCuPc nanocomposite was synthesized via a simple mixing method due to the strong binding between CuPc and TiN confirmed by density functional theory (DFT) calculations. Both XPS data and DFT calculations revealed an electron transfer from TiN substrate to CuPc molecule. The nature of charge transfer is not influenced by the presence of an oxide layer on the surface of TiN. Substantial deviations are however found between photoelectron emission microscopy (PEEM) measured work function for TiN (4.68 eV) and theoretically calculated work function for pristine stoichiometric TiN (2.63 eV). This behavior is attributed to the presence of an oxide layer on the TiN surface. TiNCuPc composite system has a work function value between those of TiN and CuPc. Our studies open up an opportunity to apply a new class of materials based on transition metal phthalocyanine/transition metal nitride composites to catalysis and optoelectronic devices.

36 MATERIALS SCIENCE↗

Deep eutectic solvent approach towards nickel/nickel nitride nanocomposites

Nickel nitride is an attractive material for a broad range of applications including catalysis. However preparations and especially those targeting nanoscale particles remain a major challenge. Herein, we report a wet-chemical approach to produce nickel/nickel nitride nanocomposites using deep eutectic solvents. A choline chloride/urea deep eutectic solvent was used as a reaction medium to form gels containing nickel acetate tetrahydrate. Heat treatment of the gel in inert atmosphere forms nanoparticles embedded within a nitrogen-doped carbon matrix. Thermogravimetric analysis (TGA) and differential thermal analysis (DTA) were used to understand the decomposition profile of the precursors and to select pyrolysis temperatures located in regions of thermal stability. X-ray diffraction (XRD) confirmed the presence of metallic nickel, whereas X-ray photoelectron spectroscopy (XPS) suggested the existence of a nickel nitride surface layer. According to transmission electron microscopy (TEM) analysis these mixed phase, possibly core-shell type nanoparticles, have very defined facets. Furthermore, these materials represent a unique opportunity to tune catalytic properties of nickel-based catalysts through control of their composition, surface structure, and morphology; in addition to employing potential benefits of a nitrogen-doped carbon support.

36 MATERIALS SCIENCE↗

Assessing metal nitrides and metal carbides as supports for thermally stable single-atom catalysts

Single-atom catalysts supported on metal oxides have been demonstrated to exhibit exceptional activity while also maintaining single-atom stability. However, alternative supports such as metal nitrides and carbides have received far less attention. Herein, we use density functional theory to systematically investigate the relative thermal stability of single-atom catalysts over a host of transition metal nitride and carbide supports. By considering the binding and dimerization energies of isolated transition metal atoms across various surface facets, we identify transition metal/support pairs that show the most promise for high-density single-atom catalysts. We find that transition metal atoms can be stabilized on both defect sites and pristine surfaces over transition metal nitrides and carbides. Furthermore, we identify promising metal/support pairings that may be suitable for achieving both stable and high-density single-atom catalysts. Furthermore, these results provide valuable insights to guide synthesis efforts towards achieving stable single-atom transition metal catalysts.

Density functional theory↗

Synthesis and magnetic properties of LaFe 13- x - y M x Si y N 3 nitrides

Here, single-phase LaFe 13-x-y M x Si y N 3 compounds (M = Mn) were synthesized by subjecting intermetallic precursors to the ammonia flow at 623 K for 4 h. The nitrides derived from Si-poor (y ≤ 3) cubic intermetallics retain the NaZn 13 -type crystal structure and show considerable (~3 %) lattice expansion compared to the nitrogen-free materials. The temperatures of the magnetic ordering transitions, all of which are second order, increase by ~ 200 K as a result of nitrogenation, and all nitrides exhibit rather weak and broad magnetocaloric effects. The nitrides are stable below 750 K, but they begin to lose nitrogen above this temperature, fully decomposing above 1050 K. The nitrogenation of the tetragonal LaFe 9 Si 4 results in the decomposition of the intermetallic phase and formation of the Fe 3 N compound together with unidentified amorphous phase(s).

36 MATERIALS SCIENCE↗

Microstructural characterization of nitrided beta Ti-Mo alloys at 1400 deg. C

In this work, the two Ti{sub 92}Mo{sub 8} and Ti{sub 84}Mo{sub 16} alloy compositions were gas nitrided at 1400 deg. C. The microstructure and the chemical composition of the gas nitrided surfaces were investigated by scanning electron microscopy and by electron probe microanalysis. Two internal needle-like nitride precipitates, {alpha}-(Ti,N) and {delta}-TiN{sub 0.3}, were observed. Their crystallographic orientation relationships in the {beta} matrix were determined by electron backscattering diffraction.

36 MATERIALS SCIENCE↗

Transmission electron microscopy investigation of acicular ferrite precipitation in {gamma}'-Fe{sub 4}N nitride

Acicular-shaped crystals precipitate from {gamma}'-Fe{sub 4}N nitride in an iron-nitrogen alloy and were identified by electron microdiffraction as {alpha}-ferrite. Acicular ferrite develops both the Nishiyama-Wassermann and the Kurdjumov-Sachs orientation relationships with {gamma}'-Fe{sub 4}N nitride. These orientation relationships were discussed in terms of the symmetry theory. The driving force for acicular ferrite formation was related to the increasing nitrogen content of {gamma}'-Fe{sub 4}N, in equilibrium with {alpha}-ferrite, with decreasing temperature. The passage from lamellar to acicular structure in Fe-N system was proposed. - Research Highlights: {yields} Acicular crystals precipitate from pearlitic{gamma}'-Fe{sub 4}N nitride in an iron-nitrogen alloy and were identified by electron microdiffraction as acicular ferrite. {yields} The crystal structure, orientation relationships with the matrix and morphologies of acicular ferrite, were studied by transmission electron microscopy. {yields} The driving force for the formation of acicular ferrite is related to the temperature dependence of nitrogen content of {gamma}'-Fe{sub 4}N, in equilibrium with ferrite. {yields} The passage from the pearlitic structure to the acicular structure in the present iron-nitrogen alloy was proposed.

36 MATERIALS SCIENCE↗

Grain refinement of a nickel and manganese free austenitic stainless steel produced by pressurized solution nitriding

Prolonged exposure at high temperatures during solution nitriding induces grain coarsening which deteriorates the mechanical properties of high nitrogen austenitic stainless steels. In this study, grain refinement of nickel and manganese free Fe–22.75Cr–2.42Mo–1.17N high nitrogen austenitic stainless steel plates was investigated via a two-stage heat treatment procedure. Initially, the coarse-grained austenitic stainless steel samples were subjected to an isothermal heating at 700 °C to be decomposed into the ferrite + Cr{sub 2}N eutectoid structure and then re-austenitized at 1200 °C followed by water quenching. Microstructure and hardness of samples were characterized using X-ray diffraction, optical and scanning electron microscopy, and micro-hardness testing. The results showed that the as-solution-nitrided steel decomposes non-uniformly to the colonies of ferrite and Cr{sub 2}N nitrides with strip like morphology after isothermal heat treatment at 700 °C. Additionally, the complete dissolution of the Cr{sub 2}N precipitates located in the sample edges during re-austenitizing requires longer times than 1 h. In order to avoid this problem an intermediate nitrogen homogenizing heat treatment cycle at 1200 °C for 10 h was applied before grain refinement process. As a result, the initial austenite was uniformly decomposed during the first stage, and a fine grained austenitic structure with average grain size of about 20 μm was successfully obtained by re-austenitizing for 10 min. - Highlights: • Successful grain refinement of Fe–22.75Cr–2.42Mo–1.17N steel by heat treatment • Using the γ → α + Cr{sub 2}N reaction for grain refinement of a Ni and Mn free HNASS • Obtaining a single phase austenitic structure with average grain size of ∼ 20 μm • Incomplete dissolution of Cr{sub 2}N during re-austenitizing at 1200 °C for long times • Reducing re-austenitizing time by homogenizing treatment before grain refinement.

36 MATERIALS SCIENCE↗