Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “multiple solutions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24
All sourcesNASA NTRSDOE OSTI
NASA NTRS2017

Control Demonstration of Multiple Doubly-Fed Induction Motors for Hybrid Electric Propulsion

The Convergent Aeronautics Solutions (CAS) High Voltage-Hybrid Electric Propulsion (HVHEP) task was formulated to support the move into future hybrid-electric aircraft. The goal of this project is to develop a new AC power architecture to support the needs of higher efficiency and lower emissions. This proposed architecture will adopt the use of the doubly-fed induction machine (DFIM) for propulsor drive motor application.The Convergent Aeronautics Solutions (CAS) High Voltage-Hybrid Electric Propulsion (HVHEP) task was formulated to support the move into future hybrid-electric aircraft. The goal of this project is to develop a new AC power architecture to support the needs of higher efficiency and lower emissions. This proposed architecture will adopt the use of the doubly-fed induction machine (DFIM) for propulsor drive motor application. DFIMs are attractive for several reasons, including but not limited to the ability to self-start, ability to operate sub- and super-synchronously, and requiring only fractionally rated power converters on a per-unit basis depending on the required range of operation. The focus of this paper is based specifically on the presentation and analysis of a novel strategy which allows for independent operation of each of the aforementioned doubly-fed induction motors. This strategy includes synchronization, soft-start, and closed loop speed control of each motor as a means of controlling output thrust; be it concurrently or differentially. The demonstration of this strategy has recently been proven out on a low power test bed using fractional horsepower machines. Simulation and hardware test results are presented in the paper.

CAS↗
NASA NTRS1990

Local oscillator induced degradation of medium-term stability in passive atomic frequency standards

As the performance of passive atomic frequency standards improves, a new limitation is encountered due to frequency fluctuations in an ancillary local oscillator (L.O.). The effect is due to time variation in the gain of the feedback which compensates L.O. frequency fluctuations. The high performance promised by new microwave and optical trapped ion standards may be severely compromised by this effect. Researchers present an analysis of this performance limitation for the case of sequentially interrogated standards. The time dependence of the sensitivity of the interrogation process to L.O. frequency fluctuations is evaluated for single-pulse and double-pulse Ramsey RF interrogation and for amplitude modulated pulses. The effect of these various time dependencies on performance of the standard is calculated for an L.O. with frequency fluctuations showing a typical 1/f spectral density. A limiting 1/sq. root gamma dependent deviation of frequency fluctuations is calculated as a function of pulse lengths, dead time, and pulse overlap. Researchers also present conceptual and hardware-oriented solutions to this problem which achieve a much more nearly constant sensitivity to L.O. fluctuations. Solutions involve use of double-pulse interrogation; alternate interrogation of multiple traps so that the dead time of one trap can be covered by operation of the other; and the use of double-pulse interrogation for two traps, so that during the time of the RF pulses, the increasing sensitivity of one trap tends to compensate for the decreasing sensitivity of the other. A solution making use of amplified-modulated pulses is also presented which shows nominally zero time variation.

Dick, G. John↗
NASA NTRS1985

Partitioning problems in parallel, pipelined and distributed computing

The problem of optimally assigning the modules of a parallel program over the processors of a multiple computer system is addressed. A Sum-Bottleneck path algorithm is developed that permits the efficient solution of many variants of this problem under some constraints on the structure of the partitions. In particular, the following problems are solved optimally for a single-host, multiple satellite system: partitioning multiple chain structured parallel programs, multiple arbitrarily structured serial programs and single tree structured parallel programs. In addition, the problems of partitioning chain structured parallel programs across chain connected systems and across shared memory (or shared bus) systems are also solved under certain constraints. All solutions for parallel programs are equally applicable to pipelined programs. These results extend prior research in this area by explicitly taking concurrency into account and permit the efficient utilization of multiple computer architectures for a wide range of problems of practical interest.

Bokhari, S.↗
NASA NTRS1995

Thermal emission from particulate surfaces: A comparison of scattering models with measured spectra

Emissivity spectra of particulate mineral samples are highly dependent on particle size when that size is comparable to the wavelength of light emitted (5-50 micrometers for the midinfrared). Proper geologic interpretation of data from planetary infrared spectrometers will require that these particle size effects be well understood. To address this issue, samples of quartz powders were produced with narrow, well-characterized particle size distributions. Mean particle diameters in these samples ranged from 15 to 227 micrometers. Emission spectra of these powders allow the first detailed comparison of the complex spectral variations with particle size observed in laboratory data with the predictions of radiative transfer models. Four such models are considered here. Hapke's relectance theory (converted to emissivity via Kirchoff's law) is the first model tested. Hapke's more recently published emission theory is also employed. The third model, the 'Mie/Conel' model, uses Mie single scattering with a two-stream approximation for multiple scattering. This model, like the first, is a converted reflec- tance model. Mie scattering assumes particles are both spherical and well separated, which is not true for the quartz powders, but includes diffraction effects. The fourth model uses the Mie solution for single scattering by spheres and inputs those results into the multiple scattering formalism of Hapke's emission theory. The results of the four models are considered in relation to the values of the optical constants n and k. We have grouped these as class 1 (k large), class 2 (k moderate, n is approximately 2), class 3 (k small, n is approximately 2), and class 4 (k small, n is approximately 1). In general, the Mie/Hapke hybrid model does best at predicting variations with grain size. In particular, it predicts changes of the correct pattern, although incorrect magnitude, for class 1 bands, where large increases in emissivity with decreasing grain size are observed. This model also does an excellent job on moderate (class 2) and very weak and intraband (class 3) regions, and correctly predicts the emission maximum and its invariance with grain size near the Christiansen frequency (class 4). The Mie/Hapke hybrid model also has the fewest free parameters of the four models examined, while maintaining the most physical treatment of the radiative transfer. The Mie/Conel model performs as well as the Mie/Hapke hybrid model in strong bands (class 1) but does not accurately model the behavior of moderate (class 2) and very weak (class 3) bands.

Moersch, J. E.↗
NASA NTRS1988

Partitioning problems in parallel, pipelined, and distributed computing

The problem of optimally assigning the modules of a parallel program over the processors of a multiple-computer system is addressed. A sum-bottleneck path algorithm is developed that permits the efficient solution of many variants of this problem under some constraints on the structure of the partitions. In particular, the following problems are solved optimally for a single-host, multiple-satellite system: partitioning multiple chain-structured parallel programs, multiple arbitrarily structured serial programs, and single-tree structured parallel programs. In addition, the problem of partitioning chain-structured parallel programs across chain-connected systems is solved under certain constraints. All solutions for parallel programs are equally applicable to pipelined programs. These results extend prior research in this area by explicitly taking concurrency into account and permit the efficient utilization of multiple-computer architectures for a wide range of problems of practical interest.

Bokhari, Shahid H.↗
NASA NTRS1980

Transmitted sound field due to an impulsive line acoustic source bounded by a plate followed by a vortex sheet

The propagation of sound due to a line acoustic source in the moving stream across a semiinfinite vortex sheet which trails from a rigid plate is examined in a linear theory for the subsonic case. A solution for the transmitted sound field is obtained with the aid of multiple integral transforms and the Wiener-Hopf technique for both the steady state (time harmonic) and initial value (impulsive source) situations. The contour of inverse transform and hence the decomposition of the functions are determined through causality and radiation conditions. The solution obtained satisfies causality and the full Kutta conditions. The transmitted sound field is composed of two waves in both the stady state and initial value problems. One is the wave scattered from the edge of the plate which is associated with the bow wave and the instability wave. These waves exist in the downstream sectors. The other is the wave transmitted through the vortex sheet which is also associated with the instability wave. Regional divisions of the transmitted sound field are identified.

Miura, T.↗
NASA NTRS1993

A hybrid structured-unstructured grid method for unsteady turbomachinery flow computations

A hybrid grid technique for the solution of 2D, unsteady flows is developed. This technique is capable of handling complex, multiple component geometries in relative motion, such as those encountered in turbomachinery. The numerical approach utilizes a mixed structured-unstructured zonal grid topology along with modeling equations and solution methods that are most appropriate in the individual domains, therefore combining the advantages of both structured and unstructured grid techniques.

Mathur, Sanjay R.↗
NASA NTRS1987

Development and application of computational aerothermodynamics flowfield computer codes

Multiple nozzle plume flow field is computed with a 3-D, Navier-Stokes solver. Numerical simulation is performed with a flux-split, two-factor, time asymptotic viscous flow solver of Ying and Steger. The two factor splitting provides a stable 3-D solution procedure under ideal-gas assumptions. An ad-hoc acceleration procedure that shows promise in improving the convergence rate by a factor of three for steady state problems is utilized. Computed solutions to generic problems at various altitude and flight conditions show flow field complexity and three-dimensional effects due to multiple nozzle jet interactions. Viscous, ideal gas solutions for the symmetric nozzle are compared with other numerical solutions.

Venkatapathy, Ethiraj↗
NASA NTRS1994

Nonlinear stability of oscillatory core-annular flow: A generalized Kuramoto-Sivashinsky equation with time periodic coefficients

In this paper the nonlinear stability of two-phase core-annular flow in a pipe is examined when the acting pressure gradient is modulated by time harmonic oscillations and viscosity stratification and interfacial tension is present. An exact solution of the Navier-Stokes equations is used as the background state to develop an asymptotic theory valid for thin annular layers, which leads to a novel nonlinear evolution describing the spatio-temporal evolution of the interface. The evolution equation is an extension of the equation found for constant pressure gradients and generalizes the Kuramoto-Sivashinsky equation with dispersive effects found by Papageorgiou, Maldarelli & Rumschitzki, Phys. Fluids A 2(3), 1990, pp. 340-352, to a similar system with time periodic coefficients. The distinct regimes of slow and moderate flow are considered and the corresponding evolution is derived. Certain solutions are described analytically in the neighborhood of the first bifurcation point by use of multiple scales asymptotics. Extensive numerical experiments, using dynamical systems ideas, are carried out in order to evaluate the effect of the oscillatory pressure gradient on the solutions in the presence of a constant pressure gradient.

Coward, Adrian V.↗
NASA NTRS1975

Numerical solutions of the unsteady Navier-Stokes equations for arbitrary bodies using boundary-fitted curvilinear coordinates

A method of automatic body-fitted curvilinear coordinate generation is described and used to construct a finite-difference solution of the full incompressible time-dependent Navier-Stokes equations for the unsteady laminar viscous flow arbitrary two-dimensional airfoils or any other two-dimensional body. A method of controlling the spacing of the coordinate lines encircling the body is developed in order to treat high Reynolds number flows, since the coordinate lines must concentrate near the surface to a greater degree as the Reynolds number increases. Multiple airfoils and submerged hydrofoils are treated as illustrative examples. The solution shows good agreement with the Blasius boundary layer solution for the flow past a semi-infinite flat plate.

Thompson, J. F.↗
NASA NTRS1987

Calculation of steady and unsteady pressures on wings at supersonic speeds with a transonic small disturbance code

A transonic unsteady aerodynamic and aeroelasticity code has been developed for application to realistic aircraft configurations. The new code is called CAP-TSD which is an acronym for Computational Aeroelasticity Program - Transonic Small Disturbance. The CAP-TSD code uses a time-accurate approximate factorization algorithm for solution of the unsteady transonic small-disturbance equation that is efficient for solution of steady and unsteady transonic flow problems including supersonic freestream flows. The new code can treat complete aircraft geometries with multiple lifting surfaces and bodies. Applications to wings in supersonic freestream flow are presented. Comparisons with selected exact solutions from linear theory are presented showing generally favorable results. Calculations for both steady and oscillatory cases for the F-5 and RAE tailplane models are compared with experimental data and also show good overall agreement. Selected steady calculations are further compared with a steady flow Euler code.

Bennett, Robert M.↗
NASA NTRSDate not supplied

Generalized Linear Targeting For Cislunar Flight

An important element of Artemis and NASA’s campaign to explore the Moon is the autonomous onboard two-level targeter (TLT) used during all cislunar flight phases. The function of the TLT is to autonomously recompute the burn targets for the upcoming burn (or multiple burns) in response to navigation and vehicle dispersion providing a solution that meets all of the trajectory constraints. Although the TLT has been utilized previously as a ground-based planning tool, and flown onboard during the Artemis I mission, it’s complexity and iterative nature make is difficult to incorporate into and support rapid analyses such as robust optimal trajectory design applications where speed is essential. In this paper, a set of generalized linear targeting algorithms that mimics many of the properties of the TLT is derived. The generalized algorithms can handle single or multiple impulsive maneuvers, with multiple constraints at multiple fixed or variable times. A linear targeting algorithm for finite burn maneuvers is also derived. The generalized linear targeting algorithms are exceptionally fast and easy to implement in Monte Carlo analysis, linear covariance (LinCov) analysis, and robust optimal trajectory design. Several cislunar flight examples are provided.

Linear Covariance Analysis↗
NASA NTRSDate not supplied

Distributed Visual Sensing and Fusion for Advanced Air Mobility

Surveillance solutions for Advanced and Urban Air Mobility frameworks are a key factor to enable safe operations of highly automated aircraft in the civil airspace. To design solutions suitable for all types of aircraft, non-cooperative sensors can be used, though many challenges arise when the small dimensions of the vehicles and their proximity to the ground during low-altitude missions are considered. A distributed sensing concept can be efficiently applied to address these challenges by exploiting multiple sensors within a surveillance network. This paper proposes a strategy to fuse the information collected by three ground-fixed cameras within a network of multiple distributed sensors and is tested with during experimental flight tests. The solution exploits standalone tracking estimates of each camera within a fusion center that performs triangulation and three-dimensional tracking. This approach is tested in a scenario involving two small UAVs flying at low altitude. The paper deals with the challenges of associating the two objects from independent and unrelated tracks to achieve robust triangulation, which produces meter-level mean errors with respect to GNSS-based ground truth.

Federica Vitiello↗
NASA NTRS2005

Effects of temperature, CO2/O2 concentrations and light intensity on cellular multiplication of microalgae, Euglena gracilis

Microalgae culture is likely to play an important role in aquatic food production modules in bioregenerative systems for producing feeds for fish, converting CO2 to O2 and remedying water quality as well as aquatic higher plants. In the present study, the effects of culture conditions on the cellular multiplication of microalgae, Euglena gracilis, was investigated as a fundamental study to determine the optimum culture conditions for microalgae production in aquatic food production modules including both microalgae culture and fish culture systems. E. gracilis was cultured under conditions with five levels of temperatures (25-33 degrees C), three levels of CO2 concentrations (2-6%), five levels of O2 concentrations (10-30%), and six levels of photosynthetic photon flux (20-200 micromoles m-2 s-1). The number of Euglena cells in a certain volume of solution was monitored with a microscope under each environmental condition. The multiplication rate of the cells was highest at temperatures of 27-31 degrees C, CO2 concentration of 4%, O2 concentration of 20% and photosynthetic photon flux of about 100 micromoles m-2 s-1. The results demonstrate that E. gracilis could efficiently produce biomass and convert CO2 to O2 under relatively low light intensities in aquatic food production modules. c2005 Published by Elsevier Ltd on behalf of COSPAR.

Euglena gracilis/drug effects/growth & development↗
NASA NTRS1986

Nonlinear rotordynamics analysis

Three analytic consequences of the nonlinear Jeffcott equations are examined. The primary application of these analyses is directed toward understanding the excessive vibrations recorded in the Liquid Oxygen (LOX) pump of the Space Shuttle Main Engine (SSME) during hot firing ground testing. The first task is to provide bounds on the coefficients of the equations which delimit the two cases of numerical solution as a circle or an annulus. The second task examines the mathematical generalization to multiple forcing functions, which includes the special problems of mass imbalance, side force, rubbing, and combination of these forces. Finally, stability and boundedness of the steady-state solutions is discussed and related to the corresponding linear problem.

Day, W. B.↗
NASA NTRS2021

Synthesis and Characterization of Fe(III)-Fe(II)- Mg- Al Smectite Solid Solutions and Implications for Planetary Science

This study demonstrates the synergies and limits of multiple measurement types for the detection of smectite chemistry and oxidation state on planetary surfaces to infer past geochemical conditions. Smectite clay minerals are common products of water-rock interactions throughout the solar system, and their detection and characterization provides important clues about geochemical conditions and past environments if sufficient information about their composition can be discerned. Here, we synthesize and report on the spectroscopic properties of a suite of smectite samples that span the intermediate compositional range between Fe(II), Fe(III), Mg, and Al end-member species using bulk chemical analyses, X-ray diffraction, Vis/IR reflectance spectroscopy, UV and green-laser Raman spectroscopy, and Mössbauer spectroscopy. Our data show that smectite composition and the oxidation state of octahedral Fe can be reliably identified in the near infrared on the basis of combination and fundamental metal-OH stretching modes between 2.1–2.9 μm, which vary systematically with chemistry. Smectites dominated by Mg or Fe(III) have spectrally distinct fundamental and combination stretches, whereas Al-rich and Fe(II)-rich smectites have similar fundamental minima near 2.76 μm, but have distinct combination M-OH features between 2.24 and 2.36 μm. We show that with expanded spectral libraries that include intermediate composition smectites and both Fe(III) and Fe(II) oxidation states, more refined characterization of smectites from MIR data is now possible, as the position of the 450 cm–1 absorption shifts systematically with octahedral Fe content, although detailed analysis is best accomplished in concert with other characterization methods. Our data also provide the first Raman spectral libraries of smectite clays as a function of chemistry, and we demonstrate that Raman spectroscopy at multiple excitation wavelengths can qualitatively distinguish smectite clays of different structures and can enhance interpretation by other types of analyses. Our sample set demonstrates how X-ray diffraction can distinguish between dioctahedral and trioctahedral smectites using either the (02,11) or (06,33) peaks, but auxiliary information about chemistry and oxidation state aids in specific identifications. Finally, the temperature-dependent isomer shift and quadrupole splitting in Mössbauer data are insensitive to changes in Fe content but reliability differentiates Fe within the smectite mineral structure.

Valerie K Fox↗
NASA NTRS1992

Efficient yet accurate solution of the linear transport equation in the presence of internal sources - The exponential-linear-in-depth approximation

The present solutions to the linear transport equation pertain to monoenergetic particles' interaction with a multiple scattering/absorbing layered medium with a general anisotropic internal source term. Attention is given to a novel exponential-linear approximation to the internal source, as a function of scattering depth, which furnishes an at-once efficient and accurate solution to the linear transport equation through its reduction of the spatial mesh size. The great superiority of the proposed method is demonstrated by the numerical results obtained in the illustrative cases of (1) an embedded thermal source and (2) a rapidly varying beam pseudosource.

Kylling, Arve↗
NASA NTRS1987

Multigrid solution of inviscid transonic flow through rotating blade passages

A fast Euler solver for three dimensional inviscid transonic flow in rotating domains is described. The time dependent Euler equations are discretized spatially with finite volumes, and are advanced temporally with a multiple stage time stepping scheme. A dramatic increase in the rate of convergence for steady solutions is achieved with a multigrid algorithm that employs the multistage scheme as its smoothing procedure. The effectiveness of the multistage scheme as a multigrid driver is enhanced by the utilization of analytically determined combinations of the governing parameters.

Smith, Wayne A.↗