Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “movement”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

Echo movement and evolution from real-time processing.

Preliminary experimental data on the effectiveness of conventional radars in measuring the movement and evolution of meteorological echoes when the radar is connected to a programmable real-time processor are examined. In the processor programming is accomplished by conceiving abstract machines which constitute the actual programs used in the methods employed. An analysis of these methods, such as the center of gravity method, the contour-displacement method, the method of slope, the cross-section method, the contour crosscorrelation method, the method of echo evolution at each point, and three-dimensional measurements, shows that the motions deduced from them may differ notably (since each method determines different quantities) but the plurality of measurement may give additional information on the characteristics of the precipitation.

Schaffner, M. R.↗

The effects of simultaneous but unequal response-independent pay to pairs of human subjects on masseter EMG and bodily movements

Electromyographic activity and bodily movement of the masseter muscle were recorded in three pairs of human subjects, where one member of each pair was systematically presented with greater pay and each could reduce the value of money received by the other. The number of biting responses was as high or higher for the subject receiving less money immediately after coin delivery. However, the number of masseter contractions for the subject receiving more money remained higher at other times during the unequal pay conditions. No responses of pay reduction were emitted by any subject toward another.

Keenan, D. M.↗

Analysis of thermal stresses and metal movement during welding

The research is reported concerning the development of a system of mathematical solutions and computer programs for one- and two-dimensional analyses for thermal stresses. Reports presented include: the investigation of thermal stress and buckling of tantalum and columbium sheet; and analysis of two dimensional thermal strains and metal movement during welding.

Muraki, T.↗

Applications of PTTI to new techniques for determining crustal movements, polar motion, and the rotation of the earth

New extra-terrestrial techniques are discussed for geodesy and geodynamics include laser range measurements to the moon or to artificial satellites, Doppler measurements with the Transit satellite system, and both independent-clock and linked-antenna microwave interferometry. The ways in which PTTI measurements are used in these techniques will be reviewed, and the accuracies expected during the latter half of the 1970's will be discussed. At least 3 of the techniques appear capable of giving accuracies of 5 cm or better in each coordinate for many points on the earth's surface, and comparable accuracies for the earth's rotation and polar motion. For fixed stations or for sites a few hundred km apart, baseline lengths accurate to 1 cm may be achieved. Ways in which the complementary aspects of the different techniques can be exploited will be discussed, as well as how they tie in with improved ground techniques for determining crustal movements. Some recent results from the extra-terrestrial methods will be mentioned.

Bender, P. L.↗

Role of stretch reflex in voluntary movements

The stretch reflex is often described as a spinal servomechanism, a device for assisting in the regulation of muscle length. Observation of the EMG response to mechanical interruption of voluntary movements fails to demonstrate a significant role for spinal reflexes at 40 msec latency. Two functional responses with latencies of 120 msec and 200 msec, implying supraspinal mediation, are observed.

Gottlieb, G. L.↗

Distribution, movement, and evolution of the volatile elements in the lunar regolith

The abundances and distributions of carbon, nitrogen, and sulfur in lunar soils are reviewed. Carbon and nitrogen have a predominantly extra-lunar origin in lunar soils and breccias, while sulfur is mostly indigeneous to the moon. The lunar processes which effect the movement, distribution, and evolution of carbon, nitrogen, and sulfur, along with the volatile alkali elements sodium, potassium, and rubidium during regolith processes are discussed. Possible mechanisms which may result in the addition to or loss from the moon of these volatile elements are considered.

Gibson, E. K., Jr.↗

Circadian rhythm of leaf movement in Capsicum annuum observed during centrifugation

Plant circadian rhythms of leaf movement in seedlings of the pepper plant (Capsicum annuum L., var. Yolo Wonder) were observed at different g-levels by means of a centrifuge. Except for the chronically imposed g-force all environmental conditions to which the plants were exposed were held constant. The circadian period, rate of change of amplitude of successive oscillations, symmetry of the cycles, and phase of the rhythm all were found not to be significantly correlated with the magnitude of the sustained g-force.

Chapman, D. K.↗

Analysis of thermal stresses and metal movement during welding

Finite element computer programs were developed to determine thermal stresses and metal movement during butt welding of flat plates and bead-on-plate welding along the girth of a cylindrical shell. Circular cylindrical shells of 6061 aluminum alloy were used for the tests. Measurements were made of changes in temperature and thermal strains during the welding process.

Muraki, T.↗

Statistical evaluation of control inputs and eye movements in the use of instruments clusters during aircraft landing

Two different types of analyses were done on data from a study in which eye movements and other variables were recorded while four pilots executed landing sequences in a Boeing 737 simulation. Various conditions were manupulated, including changes in turbulence, starting position, and instrumentation. Control inputs were analyzed in the context of the various conditions and compared against ratings of workload obtained using the Cooper-Harper scale. A number of eye-scanning measures including mean dwell time and transition from one instrument to another were entered into a principal components factor analysis. The results show a differentiation between control inputs and eye-scanning behavior. This shows the need for improved definition of workload and experiments to uncover the important differences among control inputs, eye-scanning and cognitive processes of the pilot.

Dick, A. O.↗

Bidirectional overadaptation achieved by executing leftward or rightward head movements during unidirectional rotation

Nine college age males, all prone to motion sickness, were subjects in an experiment designed to test adaptation to motion. Subjects were placed in a slow rotation room (SRR) for varying intervals and asked to perform headward movements. Degree of adaptation to the SRR was measured in the framework of 3 categories: reduction of ataxia, reduction of oculogyral illusion, and reduction of epiphenomena, which includes symptoms of motion sickness. 'Satisfactory' adaptation was acquired and retained in 7 of the 9 subjects. Tables are presented summarizing the results.

Graybiel, A.↗

Equatorial irregularity belt and its movement during a magnetic storm

Evidence for an equatorial irregularity belt and its movement during a magnetic storm has been obtained from Faraday rotation measurements at a chain of 140-MHz radio beacons receiving from the ATS-6 satellite. The stations covered a latitude region from the magnetic equator to the 45 deg N dip on the Indian subcontinent. An irregularity belt extending from the magnetic equator to about 27 deg N latitude was observed during the main phase of the magnetic storm of 10 January, 1976.

Vats, H. O.↗

Lightweight helmet-mounted eye movement measurement system

The helmet-mounted eye movement measuring system, weighs 1,530 grams; the weight of the present aviators' helmet in standard form with the visor is 1,545 grams. The optical head is standard NAC Eye-Mark. This optical head was mounted on a magnesium yoke which in turn was attached to a slide cam mounted on the flight helmet. The slide cam allows one to adjust the eye-to-optics system distance quite easily and to secure it so that the system will remain in calibration. The design of the yoke and slide cam is such that the subject can, in an emergency, move the optical head forward and upward to the stowed and locked position atop the helmet. This feature was necessary for flight safety. The television camera that is used in the system is a solid state General Electric TN-2000 with a charged induced device imager used as the vidicon.

Barnes, J. A.↗

Short-range movement of major agricultural pests

Visual observations of population fluctuations which cannot be accounted for by either mortality or natality are presented. Lygus bugs in the westside of the San Joaquin Valley of California are used as an example. The dispersal of most agricultural pests in one of the less known facets of their biology is discussed. Results indicate a better understanding of insect movement is needed to develop a sound pest management program.

Vansteenwyk, R.↗

Local precision nets for monitoring movements of faults and large engineering structures

Along Bocono Fault were installed local high precision geodetic nets to observe the possible horizontal crustal deformations and movements. In the fault area there are few big structures which are also included in the mentioned investigation. In the near future, measurements shall be extended to other sites of Bocono Fault and also to the El Pilar Fault. In the same way and by similar methods high precision geodetic nets are applied in Venezuela to observe the behavior of big structures, as bridges and large dams and of earth surface deformations due to industrial activities.

Henneberg, H. G.↗

Sea level data and techniques for detecting vertical crustal movements

An attempt is made to survey problems, requirements, and the outlook for the future in the study of sea level time series so as to determine the relative movement of land and sea levels. The basic aim is to eliminate from the record the contributions from whatever marine dynamic phenomena respond to treatment, allowing the secular element to be identified with optimum clarity. Nevertheless the concept of sea level perturbation varies according to regional experience. The recent work of the Permanent Service for Mean Sea Level helps to eliminate geodetic noise from the series and makes it possible, perhaps, to treat the global mean sea level data bank so as to define eustatic changes in ocean volume which, in the present context, may be regarded as the final goal, allowing the identification of vertical crustal motion itself.

Lennon, G. W.↗

Modelling of physical influences in sea level records for vertical crustal movement detection

Attempts to specify and evaluate such physical influences are reviewed with the intention of identifying problem areas and promising approaches. An example of linear modelling based on air/water temperatures, atmospheric pressure, river discharges, geostrophic and/or local wind velocities, and including forced period terms to allow for the long period tides and Chandlerian polar motion is evaluated and applied to monthly mean sea levels recorded in Atlantic Canada. Refinement of the model to admit phase lag in the response to some of the driving phenomena is demonstrated. Spectral analysis of the residuals is employed to assess the model performance. The results and associated statistical parameters are discussed with emphasis on elucidating the sensitivity of the technique for detection of local episodic and secular vertical crustal movements, the problem areas most critical to the type of approach, and possible further developments.

Anderson, E. G.↗

Investigations on vertical crustal movements in the Venezuelan Andes by gravimetric methods

A precise gravimetric network has been installed in the Venezuelan Andes to study eventual gravity changes due to vertical tectonic movements. The design and the measurements of the network are described and the accuracy is estimated. In the center of the region a local gravity network has been reobserved three times. The detected variations are discussed. In order to obtain a genuine statement as far as possible about the significance of observed gravity changes, requirements for the procedure of monitoring precise gravity networks are pointed out.

Drewes, H.↗

Applicability of APT aided-inertial system to crustal movement monitoring

The APT system, its stage of development, hardware, and operations are described. The algorithms required to perform the real-time functions of navigation and profiling are presented. The results of computer simulations demonstrate the feasibility of APT for its primary mission: topographic mapping with an accuracy of 15 cm in the vertical. Also discussed is the suitability of modifying APT for the purpose of making vertical crustal movement measurements accurate to 2 cm in the vertical, and at least marginal feasibility is indicated.

Soltz, J. A.↗