Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “monolayers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

Exciton-dominant electroluminescence from a diode of monolayer MoS{sub 2}

In two-dimensional monolayer MoS{sub 2}, excitons dominate the absorption and emission properties. However, the low electroluminescent efficiency and signal-to-noise ratio limit our understanding of the excitonic behavior of electroluminescence. Here, we study the microscopic origin of the electroluminescence from a diode of monolayer MoS{sub 2} fabricated on a heavily p-type doped silicon substrate. Direct and bound-exciton related recombination processes are identified from the electroluminescence. At a high electron-hole pair injection rate, Auger recombination of the exciton-exciton annihilation of the bound exciton emission is observed at room temperature. Moreover, the efficient electrical injection demonstrated here allows for the observation of a higher energy exciton peak of 2.255 eV in the monolayer MoS{sub 2} diode, attributed to the excited exciton state of a direct-exciton transition.

36 MATERIALS SCIENCE↗

Temperature effect on optical spectra of monolayer molybdenum disulfide

Recently, measured optical absorption and photoluminescence spectra reveal substantial frequency shifts of both exciton and trion peaks as monolayer molybdenum disulfide, MoS{sub 2}, is cooled from 363 K to 4 K. First-principles simulations using the GW-Bethe-Salpeter equation approach satisfactorily reproduce these frequency shifts by incorporating the thermal expansion effect. Studying these temperature effects in monolayer MoS{sub 2} is crucial for rectifying the results of available experiments with the previous predictions of zero-temperature-limit simulations. Moreover, our estimated thermal expansion coefficient of monolayer MoS{sub 2} is less than that of bulk counterpart by tracking the frequency shifts of the exciton peaks in optical spectra. This may serve as a convenient way to estimate thermal expansion coefficients of general two-dimensional chalcogenides.

36 MATERIALS SCIENCE↗

Photoluminescence study of the substitution of Cd by Zn during the growth by atomic layer epitaxy of alternate CdSe and ZnSe monolayers

We present a study of the substitution of Cd atoms by Zn atoms during the growth of alternate ZnSe and CdSe compound monolayers (ML) by atomic layer epitaxy (ALE) as a function of substrate temperature. Samples contained two quantum wells (QWs), each one made of alternate CdSe and ZnSe monolayers with total thickness of 12 ML but different growth parameters. The QWs were studied by low temperature photoluminescence (PL) spectroscopy. We show that the Cd content of underlying CdSe layers is affected by the exposure of the quantum well film to the Zn flux during the growth of ZnSe monolayers. The amount of Cd of the quantum well film decreases with higher exposures to the Zn flux. A brief discussion about the difficulties to grow the Zn{sub 0.5}Cd{sub 0.5}Se ordered alloy (CuAu-I type) by ALE is presented.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Charge and magnetic states of Mn-, Fe-, and Co-doped monolayer MoS{sub 2}

First-principles calculations have been performed to investigate the electronic and magnetic properties of monolayer MoS{sub 2} substitutionally doped with Mn, Fe, and Co in possible charge states (q). We find that the Mn, Fe, and Co dopants substituting for a Mo atom in monolayer MoS{sub 2} (Mn@Mo, Fe@Mo, and Co@Mo) are all magnetic in their neutral and charge states except in the highest positive charge states. Mn@Mo, Fe@Mo, and Co@Mo have the same highest negative charge states of q=−2 for chemical potential of electron just below the conduction band minimum, which corresponds to the electron doping. In the q=−2 state, Mn@Mo has a much larger magnetic moment than its neutral state with the antiferromagnetic coupling between the Mn dopant and its neighboring S atoms maintained, while Fe@Mo and Co@Mo have equal or smaller magnetic moments than their neutral states. The possible charge states of Mn@Mo, Fe@Mo, and Co@Mo and the variation of the magnetic moments for different dopants and charge states are due to the change of the occupation and energy of the anti-bonding defect levels in the band gap. The rich magnetic properties of the neutral and charge states suggest possible realization of the substitutionally Mn-, Fe-, and Co-doped monolayer MoS{sub 2} as dilute magnetic semiconductors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Monolayers of MoS{sub 2} as an oxidation protective nanocoating material

First-principle calculations are employed to investigate the interaction of oxygen with ideal and defective MoS{sub 2} monolayers. Our calculations show that while oxygen atoms are strongly bound on top of sulfur atoms, the oxygen molecule only weakly interacts with the surface. The penetration of oxygen atoms and molecules through a defect-free MoS{sub 2} monolayer is prevented by a very high diffusion barrier indicating that MoS{sub 2} can serve as a protective layer for oxidation. The analysis is extended to WS{sub 2} and similar coating characteristics are obtained. Our calculations indicate that ideal and continuous MoS{sub 2} and WS{sub 2} monolayers can improve the oxidation and corrosion-resistance of the covered surface and can be considered as an efficient nanocoating material.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Vapor-transport growth of high optical quality WSe{sub 2} monolayers

Monolayer transition metal dichalcogenides are atomically thin direct-gap semiconductors that show a variety of novel electronic and optical properties with an optically accessible valley degree of freedom. While they are ideal materials for developing optical-driven valleytronics, the restrictions of exfoliated samples have limited exploration of their potential. Here, we present a physical vapor transport growth method for triangular WSe{sub 2} sheets of up to 30 μm in edge length on insulating SiO{sub 2} substrates. Characterization using atomic force microscopy and optical microscopy reveals that they are uniform, monolayer crystals. Low temperature photoluminescence shows well resolved and electrically tunable excitonic features similar to those in exfoliated samples, with substantial valley polarization and valley coherence. The monolayers grown using this method are therefore of high enough optical quality for routine use in the investigation of optoelectronics and valleytronics.

36 MATERIALS SCIENCE↗

Approaching total absorption at near infrared in a large area monolayer graphene by critical coupling

We demonstrate experimentally close to total absorption in monolayer graphene based on critical coupling with guided resonances in transfer printed photonic crystal Fano resonance filters at near infrared. Measured peak absorptions of 35% and 85% were obtained from cavity coupled monolayer graphene for the structures without and with back reflectors, respectively. These measured values agree very well with the theoretical values predicted with the coupled mode theory based critical coupling design. Such strong light-matter interactions can lead to extremely compact and high performance photonic devices based on large area monolayer graphene and other two–dimensional materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Amino-terminated biphenylthiol self-assembled monolayers as highly reactive molecular templates

Self-assembled monolayers (SAMs) with amino tail groups are of interest due to their ability of coupling further compounds. Such groups can be, in particular, created by electron irradiation of nitro- or nitrile-substituted aromatic SAMs, which provide a basis for chemical nanolithography and the fabrication of functionalized nanomembranes. An estimate of reactivity of the created amino groups requires a reference system of homogeneous, amino-terminated aromatic SAMs, which can also be used as a highly reactive molecular template. Here, we describe the synthesis of 4′-aminobiphenyl-4-thiol (ABPT) and SAMs prepared from this precursor on Au(111). The monolayers were characterized by X-ray photoelectron spectroscopy and near edge X-ray absorption fine structure spectroscopy, which revealed that they are well defined, chemically uniform, densely packed, and highly ordered. To examine the influence of electron irradiation on the reactivity of the terminal amino groups, ABPT SAMs were exposed to low energy (50 eV) electrons up to a dose of 40 mC/cm{sup 2} and, subsequently, immersed in either trifluoroacetic, pentafluoropropionic, or heptafluorobutyric anhydride. Analysing the amount of the attached anhydride species made it possible to determine the percentage of reactive amino groups as well as the effect of steric hindrance upon the coupling reaction. The above results are compared with those obtained for the well-established nitro-substituted biphenylthiol monolayers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Gate controlled electronic transport in monolayer MoS{sub 2} field effect transistor

The electronic spin and valley transport properties of a monolayer MoS{sub 2} are investigated using the non-equilibrium Green's function formalism combined with density functional theory. Due to the presence of strong Rashba spin orbit interaction (RSOI), the electronic valence bands of monolayer MoS{sub 2} are split into spin up and spin down Zeeman-like texture near the two inequivalent vertices K and K′ of the first Brillouin zone. When the gate voltage is applied in the scattering region, an additional strong RSOI is induced which generates an effective magnetic field. As a result, electron spin precession occurs along the effective magnetic field, which is controlled by the gate voltage. This, in turn, causes the oscillation of conductance as a function of the magnitude of the gate voltage and the length of the gate region. This current modulation due to the spin precession shows the essential feature of the long sought Datta-Das field effect transistor (FET). From our results, the oscillation periods for the gate voltage and gate length are found to be approximately 2.2 V and 20.03a{sub B} (a{sub B} is Bohr radius), respectively. These observations can be understood by a simple spin precessing model and indicate that the electron behaviors in monolayer MoS{sub 2} FET are both spin and valley related and can easily be controlled by the gate.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Strain-induced gap transition and anisotropic Dirac-like cones in monolayer and bilayer phosphorene

The electronic properties of two-dimensional monolayer and bilayer phosphorene subjected to uniaxial and biaxial strains have been investigated using first-principles calculations based on density functional theory. Strain engineering has obvious influence on the electronic properties of monolayer and bilayer phosphorene. By comparison, we find that biaxial strain is more effective in tuning the band gap than uniaxial strain. Interestingly, we observe the emergence of Dirac-like cones by the application of zigzag tensile strain in the monolayer and bilayer systems. For bilayer phosphorene, we induce the anisotropic Dirac-like dispersion by the application of appropriate armchair or biaxial compressive strain. Our results present very interesting possibilities for engineering the electronic properties of phosphorene and pave a way for tuning the band gap of future electronic and optoelectronic devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Molecular orientation of copper phthalocyanine thin films on different monolayers of fullerene on SiO{sub 2} or highly oriented pyrolytic graphite

The interface electronic structures of copper phthalocyanine (CuPc) have been studied using ultraviolet photoemission spectroscopy as different monolayers of C{sub 60} were inserted between CuPc and a SiO{sub 2} or highly ordered pyrolytic graphite (HOPG) substrate. The results show that CuPc has standing up configuration with one monolayer of C{sub 60} insertion on SiO{sub 2} while lying down on HOPG, indicating that the insertion layer propagates the CuPc-substrate interaction. Meanwhile, CuPc on more than one monolayers of C{sub 60} on different substrates show that the substrate orientation effect quickly vanished. Our study elucidates intriguing molecular interactions that manipulate molecular orientation and donor-acceptor energy level alignment.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Semiconductor-to-metal phase transition in monolayer ZrS{sub 2}: GGA+U study

We report structural and electronic properties of ZrS{sub 2} monolayer within density functional theory (DFT) by inclusion of Hubbard on-site Coulomb and exchange interactions. The importance of on-site interactions for both ZrS{sub 2} bulk and monolayer has been highlighted that significantly improves the electronic band-gap. It is demonstrated that mechanical strain induces structural phase transition that results in semiconductor-to-metal transition in monolayer ZrS{sub 2}. This phenomenon has important implications in technological applications such as flexible, low power and transparent electronic devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Stability and electronic properties of SiC nanowire adsorbed on MoS{sub 2} monolayer

Structural stability and electronic properties of silicon carbide (SiC) nano-wire on MoS{sub 2} monolayer are investigated within the framework of density functional theory (DFT). The preferred binding site for the SiC nano-wire is predicted to be hollow site of monolayer. In the electronic band structure the states in valence band near Fermi level are mainly due to nano-wire leading to reduction of band gap relative to monolayer. These results provide a platform for their applications in optoelectronic devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Adsorption of alkali, alkaline-earth, simple and 3d transition metal, and nonmetal atoms on monolayer MoS{sub 2}

Single adsorption of different atoms on pristine two-dimensional monolayer MoS{sub 2} have been systematically investigated by using density functional calculations with van der Waals correction. The adatoms cover alkali metals, alkaline earth metals, main group metal, 3d-transition metals, coinage metal and nonmetal atoms. Depending on the adatom type, metallic, semimetallic or semiconducting behavior can be found in direct bandgap monolayer MoS{sub 2}. Additionally, local or long-range magnetic moments of two-dimensional MoS{sub 2} sheet can also attained through the adsorption. The detailed atomic-scale knowledge of single adsorption on MoS{sub 2} monolayer is important not only for the sake of a theoretical understanding, but also device level deposition technological application.

36 MATERIALS SCIENCE↗

Investigation on gallium ions impacting monolayer graphene

In this paper, the physical phenomena of gallium (Ga{sup +}) ion impacting monolayer graphene in the nanosculpting process are investigated experimentally, and the mechanisms are explained by using Monte Carlo (MC) and molecular dynamics (MD) simulations. Firstly, the MC method is employed to clarify the phenomena happened to the monolayer graphene target under Ga{sup +} ion irradiation. It is found that substrate has strong influence on the damage mode of graphene. The mean sputtering yield of graphene under 30 keV Ga{sup +} ion irradiation is 1.77 and the least ion dose to completely remove carbon atoms in graphene is 21.6 ion/nm{sup 2}. Afterwards, the focused ion beam over 21.6 ion/nm{sup 2} is used for the irradiation on a monolayer graphene supported by SiO2 experimentally, resulting in the nanostructures, i.e., nanodot and nanowire array on the graphene. The performances of the nanostructures are characterized by atomic force microscopy and Raman spectrum. A plasma plume shielding model is put forward to explain the nanosculpting results of graphene under different irradiation parameters. In addition, two damage mechanisms are found existing in the fabrication process of the nanostructures by using empirical MD simulations. The results can help us open the possibilities for better control of nanocarbon devices.

36 MATERIALS SCIENCE↗

Spatially resolved band alignments at Au-hexadecanethiol monolayer-GaAs(001) interfaces by ballistic electron emission microscopy

We study structural and electronic inhomogeneities in Metal—Organic Molecular monoLayer (OML)—semiconductor interfaces at the sub-nanometer scale by means of in situ Ballistic Electron Emission Microscopy (BEEM). BEEM imaging of Au/1-hexadecanethiols/GaAs(001) heterostructures reveals the evolution of pinholes density as a function of the thickness of the metallic top-contact. Using BEEM in spectroscopic mode in non-short-circuited areas, local electronic fingerprints (barrier height values and corresponding spectral weights) reveal a low-energy tunneling regime through the insulating organic monolayer. At higher energies, BEEM evidences new conduction channels, associated with hot-electron injection in the empty molecular orbitals of the OML. Corresponding band diagrams at buried interfaces can be thus locally described. The energy position of GaAs conduction band minimum in the heterostructure is observed to evolve as a function of the thickness of the deposited metal, and coherently with size-dependent electrostatic effects under the molecular patches. Such BEEM analysis provides a quantitative diagnosis on metallic top-contact formation on organic molecular monolayer and appears as a relevant characterization for its optimization.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Electronic and magnetic properties of nonmetal atoms adsorbed ReS{sub 2} monolayers

The stable configurations and electronic and magnetic properties of nonmetal atoms (H, N, P, O, S, F, and Cl) adsorbed ReS{sub 2} monolayers have been investigated by first-principles calculations. It is found that H, O, S, F, and Cl prefer to occupy the peak sites of S atoms, while both N and P atoms favor the valley sites of S atoms. The ReS{sub 2} sheet exhibits a good adsorption capability to nonmetal atoms. The reconstruction of the surface is pronounced in N- and P-adsorbed ReS{sub 2} monolayers. In H-adsorbed case, the Fermi level is pulled into the conduction band, which results in the semiconductor-metal transition. The same magnetic moment of 1μ{sub B} is found in the N-, P-, F-, and Cl-adsorbed ReS{sub 2} monolayers, while the mechanisms of forming magnetic moment for N (P)- and F (Cl)-adsorbed cases are different. In addition, the spatial extensions of spin density in P-, F-, and Cl-adsorbed cases are larger than that in N-adsorbed case, which is more suitable to achieve long-range magnetic coupling interaction at low defect concentrations. Our results provide insight for achieving metal-free magnetism and a tunable band gap for various electronic and spintronic devices based on ReS{sub 2}.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Spin- and valley-coupled electronic states in monolayer WSe{sub 2} on bilayer graphene

We have fabricated a high-quality monolayer WSe{sub 2} film on bilayer graphene by epitaxial growth and revealed the electronic states by spin- and angle-resolved photoemission spectroscopy. We observed a direct energy gap at the Brillouin-zone corner in contrast to the indirect nature of gap in bulk WSe{sub 2}, which is attributed to the lack of interlayer interaction and the breaking of space-inversion symmetry in monolayer film. A giant spin splitting of ∼0.5 eV, which is the largest among known monolayer transition-metal dichalcogenides, is observed in the energy band around the zone corner. The present results suggest a high potential applicability of WSe{sub 2} to develop advanced devices based with the coupling of spin- and valley-degrees of freedom.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗