SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Experimental data indicate that the volume fraction of particles in a packed bed (i.e. maximum packing) depends on particle size. One explanation for this is based on the idea that particle adhesion is the primary factor. In this paper, however, it is shown that entrainment and immobilization of liquid by the particles can also account for the facts.
The paper reports in situ direct measurements of regularly observed thermosphere neutral particle (i.e., N2) temperature maxima that occur predominantly after midnight. The measurements were made using the Neutral Atmosphere Temperature Instrument aboard Atmosphere Explorer-E in circular orbit (inclination 19 deg) at about 275 km. Hundreds of midnight temperature maxima were observed, some having values exceeding the well-known afternoon maximum. Simultaneous in situ direct measurements of the wind component normal to the orbit plane have also been obtained and observed to correlate in a systematic way with the temperature maxima.
The most important single electrical parameter characterizing solar cell performance is Pm, the cell's maximum power output. In order to experimentally determine Pm it is necessary accurately to control both illumination and cell temperature during measurements. Two quite different measurement approaches can be used: an equilibrium method and a transient flash method. Both techniques are discussed in the paper in detail.
The CLASSY clustering method alternates maximum likelihood iterative techniques for estimating the parameters of a mixture distribution with an adaptive procedure for splitting, combining, and eliminating the resultant components of the mixture. The adaptive procedure is based on maximizing the fit of a mixture of multivariate normal distributions to the observed data using its first through fourth central moments. It generates estimates of the number of multivariate normal components in the mixture as well as the proportion, mean vector, and covariance matrix for each component. The basic mathematical model for CLASSY and the actual operation of the algorithm as currently implemented are described. Results of applying CLASSY to real and simulated LANDSAT data are presented and compared with those generated by the iterative self-organizing clustering system algorithm on the same data sets.
A study is presented of the development of the Remote Manipulator System (RMS) configurations for jettison of the solar panels on the Solar Maximum Mission/Multimission Satellite. A valid RMS maneuver between jettison configurations was developed. Arm and longeron loads and effector excursions due to the solar panel jettison were determined to see if they were within acceptable limits. These loads and end effector excursions were analyzed under two RMS modes, servos active in position hold submode, and in the brakes on mode.
A frequency domain maximum likelihood method is developed for the estimation of airplane stability and control parameters from measured data. The model of an airplane is represented by a discrete-type steady state Kalman filter with time variables replaced by their Fourier series expansions. The likelihood function of innovations is formulated, and by its maximization with respect to unknown parameters the estimation algorithm is obtained. This algorithm is then simplified to the output error estimation method with the data in the form of transformed time histories, frequency response curves, or spectral and cross-spectral densities. The development is followed by a discussion on the equivalence of the cost function in the time and frequency domains, and on advantages and disadvantages of the frequency domain approach. The algorithm developed is applied in four examples to the estimation of longitudinal parameters of a general aviation airplane using computer generated and measured data in turbulent and still air. The cost functions in the time and frequency domains are shown to be equivalent; therefore, both approaches are complementary and not contradictory. Despite some computational advantages of parameter estimation in the frequency domain, this approach is limited to linear equations of motion with constant coefficients.
Retrieval of the solar maximum mission (SMM) observatory is feasible in terms of orbiter primary reaction control system (PRCS) plume disturbance of the SMM, orbiter propellant consumed, and flight time required. Man-in-loop simulations will be required to validate these operational techniques before the verification process is complete. Candidate approach and flyaround techniques were developed that allow the orbiter to attain the proper alinement with the SMM for clear access to the grapple fixture (GF) prior grappling. Because the SMM has very little control authority (approximately 14.8 pound-foot-seconds in two axes and rate-damped in the third) it is necessary to inhibit all +Z (upfiring) PRCS jets on the orbiter to avoid tumbling the SMM. A profile involving a V-bar approach and an out-of-plane flyaround appears to be the best choice and is recommended at this time. The flyaround technique consists of alining the +X-axes of the two vehicles parallel with each other and then flying the orbiter around the SMM until the GF is in view. The out-of-plane flyaround technique is applicable to any inertially stabilized payload, and, the entire final approach profile could be considered as standard for most retrieval missions.
A simple iterative dual algorithm for maximum entropy image restoration is presented. The dual algorithm involves fewer parameters than conventional minimization in the image space. Minicomputer test results for Fourier synthesis with inadequate phantom data are given.
The paper considers the objectives of the Solar Maximum Mission (SMM), and describes its spacecraft, the scientific planning, the observing program, and the guest investigator programs. The SMM observatory will be injected into a circular orbit with an altitude of 574 km and it is designed for a minimum of one year of operational life; its observing program is directed at the physics of solar flares, and includes studies of thermalization, the nature of electron acceleration, the flare energy budget, and the flare decay. Finally, the SMM Guest Investigator program is discussed, including ground-based synoptic and atomic data investigations and SMM data interpretation.
The paper describes an actively shielded, multicrystal scintillation spectrometer for measurement of the solar gamma ray flux used by the Solar Maximum Mission Gamma Ray Experiment. The instrument provides a 476-channel pulse height spectrum every 16.38 s over the 0.3-9 MeV energy range; the gamma ray spectral analysis can be extended to at least 15 MeV on command. The instrument is designed to measure the intensity, energy, and Doppler shift of narrow gamma ray lines, the intensity of extremely broadened lines, and the photon continuum.
The paper considers the primary scientific objectives of the Hard X-ray Burst Spectrometer to be flown on the Solar Maximum Mission. The objectives are: (1) to determine mechanisms which accelerate electrons to 20-100 keV in the first stage of a solar flare and to more than 1 MeV in the second stage of many flares, and (2) to characterize the spatial and temporal relation between electron acceleration, storage, and energy loss throughout a solar flare. In the first year after launch, it is expected that about 1000 flares will be observed above the instrument threshold.
The Ultraviolet Spectrometer and Polarimeter (UVSP) on the Solar Maximum Mission spacecraft is described, including the experiment objectives, system design, performance, and modes of operation. The instrument operates in the wavelength range 1150-3600 A with better than 2 arcsec spatial resolution, raster range 256 x 256 sq arcsec, and 20 mA spectral resolution in second order. Observations can be made with specific sets of four lines simultaneously, or with both sides of two lines simultaneously for velocity and polarization. A rotatable retarder can be inserted into the spectrometer beam for measurement of Zeeman splitting and linear polarization in the transition region and chromosphere.
The Gamma Ray Experiment (GRE) is one of the seven instruments on the Solar Maximum Mission. The scientific objective of the GRE is to study solar gamma ray emissions expected during, and, according to some solar models, prior to solar flares. The instrument consists of a detector assembly and a remote electronic assembly. The latter includes redundant low-voltage power supplies and the remaining command, data handling, and ancillary electronic subsystems of the instrument. The electronic systems and subsystems of the instrument are described in some detail.
An examination of the transition level at which the ionospheric ions O(+) and H(+) are equal in concentration has been carried out by using the retarding potential analyzer data from the OGO 6 satellite. Between dip latitudes of 0 and 50 deg the transition level shows a much more pronounced latitude dependence during solar maximum than during solar minimum. The longitude dependence of the transition level features indicates the roles that zonal and meridional F region winds might play in the distribution of O(+) and H(+) in the low- and mid-latitude ionosphere.
A series of twilight interferometric observations of the near infrared O(+)(2P) doublets at 7320 and 7330 A between April 1979 and October 1979 detected excessive amounts of emission at shadow heights above 550 km. The scale height deduced from the vertical brightness profile determined from data taken on September 26, 1979, when the 10.7-cm flux was 231, showed a marked increase above 550 km. The equivalent temperature was estimated to be 4000 K or higher. Observations of the emission line shape with the high-resolution capability of the interferometer substantiated these results by a very apparent progressive broadening of the emission profile between times of low and high shadow height. It is concluded from these results that there exists an atomic oxygen corona overlying the thermosphere during the solar maximum period.
The maximum likelihood method is used for estimation of unknown initial conditions, constant bias and scale factor errors in measured flight data. The model for the system to be identified consists of the airplane six-degree-of-freedom kinematic equations, and the output equations specifying the measured variables. The estimation problem is formulated in a general way and then, for practical use, simplified by ignoring the effect of process noise. The algorithm developed is first applied to computer generated data having different levels of process noise for the demonstration of the robustness of the method. Then the real flight data are analyzed and the results compared with those obtained by the extended Kalman filter algorithm.
This paper presents the results of a study of the feasibility of using low order equivalent mathematical models of a highly augmented aircraft, the F-8 digital fly-by-wire (DFBW), for flying qualities research. Increasingly complex models were formulated and evaluated using flight data and maximum likelihood estimation techniques. The aircraft actuator was modeled alone first. Next the equivalent derivatives were used to model the longitudinal unaugmented F-8 DFBW aircraft dynamics. The most complex model incorporated a pure time shift of the pilot input, a first order lag, and the basic longitudinal airframe model. This same model was then implemented for the F-8 DFBW aircraft in a highly augmented mode. Excellent matching of the dynamics resulted for this model, indicating that low order equivalent models which are good representations of the highly augmented F-8 DFBW aircraft can be formulated with these methods.
A description is presented of a flight-qualified large-aperture 12 x 12-arcsec angular resolution multigrid X-ray collimator developed for the Solar Maximum Mission (SMM) flat crystal spectrometer. This collimator, designed for the 1.4-22.4-A wavelength range, utilizes an optical bench/metering structure to align and support prealigned grid subassemblies. The optical bench is a lightweight, rigid, and stable aluminum honeycomb structure. The grids are of a compound and bimetallic design, having 63.5-micron square holes on an 88.9-micron spacing in 8-micron thick gold, which is in turn supported by a 76-micron thick Invar grid having 600-micron square holes on a 739-micron spacing. The small apertures in the gold provide the 12-arcsec collimation with the Invar grids providing wide angle off-axis blocking out to an approximately 35 arcmin view angle. The collimator has seven individual channels, four of a 5.1- x 10-cm area and three of a 1.3- x 10-cm area. Laboratory measurements gave an average angular resolution of 12.5 arcsec FWHM with 0.259 transmission for the large-area channels and 12.0 arcsec and 0.200 transmission for the small-area channels. A thermal filter composed of two layers of approximately 1000-A thick aluminum prevents solar heating of the front collimator grids by absorbing longer wavelength radiation while passing most of the X radiation in the band of interest.