Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “maturation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Growth of cosmic structure

We review one of the most fruitful areas in cosmology today that bridge theory and data - the temporal growth of large-scale structure. We go over the growth's physical foundations, and derive its behavior in simple cosmological models. While doing so, we explain how measurements of growth can be used to understand theory. We then review how some of the most mature cosmological probes-galaxy clustering, gravitational lensing, the abundance of clusters of galaxies, cosmic velocities, and cosmic microwave background-can be used to probe the growth of structure. We report the current constraints on growth, which are summarized as measurements of the parameter combination fσ 8 as a function of redshift, or else as the mass fluctuation amplitude parameter S 8 . Here, we finally illustrate several statistical approaches, ranging from the "growth index" parameterization to more general comparisons of growth and geometry, that can sharply test the standard cosmological model and indicate the presence of modifications to general relativity.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Elastic thermobarometry on metapelites across the crustal section of the Famatinian Arc, Argentina

We applied elastic thermobarometry on garnet-bearing migmatites along two transects through the crustal section at Sierra Valle Fértil-La Huerta, Argentina. We performed quartz-in-garnet barometry and zircon-in-garnet thermometry on metapelites from different paleo-depths across the crustal section. Our work recovers entrapment pressures ranging from 240 to 1330 MPa and entrapment temperatures between 691 and 1574 °C. The entrapment conditions are broadly consistent with anticipated pressures and temperatures along the crustal section derived previously using conventional, thermodynamic thermobarometers. The quartz-in-garnet barometer reproduces those conventionally established entrapment conditions when samples only experienced conditions within the alpha-quartz stability field. Raman-derived pressures for samples that experienced beta-quartz reference conditions are commonly much higher than those established by conventional barometry. Samples that preserve compressive (positive) residual pressures best reproduce reference entrapment pressures. Entrapment temperatures show high variability and overestimation of temperature conditions compared to conventional results. These results indicate elastic thermobarometry over- or under-estimates crystallization conditions in rocks crystallized at high temperatures, as is common in the Famatinian Arc deep-crust. We suggest that modeling quartz behavior across the alpha–beta transition may present challenges, as does shape maturation, viscous deformation, and radiation damage in zircon.

58 GEOSCIENCES↗
DOE OSTI2021

Hotter droughts alter resource allocation to chemical defenses in piñon pine

Abstract Heat and drought affect plant chemical defenses and thereby plant susceptibility to pests and pathogens. Monoterpenes are of particular importance for conifers as they play critical roles in defense against bark beetles. To date, work seeking to understand the impacts of heat and drought on monoterpenes has primarily focused on young potted seedlings, leaving it unclear how older age classes that are more vulnerable to bark beetles might respond to stress. Furthermore, we lack a clear picture of what carbon resources might be prioritized to support monoterpene synthesis under drought stress. To address this, we measured needle and woody tissue monoterpene concentrations and physiological variables simultaneously from mature piñon pines ( Pinus edulis ) from a unique temperature and drought manipulation field experiment. While heat had no effect on total monoterpene concentrations, trees under combined heat and drought stress exhibited ~ 85% and 35% increases in needle and woody tissue, respectively, over multiple years. Plant physiological variables like maximum photosynthesis each explained less than 10% of the variation in total monoterpenes for both tissue types while starch and glucose + fructose measured 1-month prior explained ~ 45% and 60% of the variation in woody tissue total monoterpene concentrations. Although total monoterpenes increased under combined stress, some key monoterpenes with known roles in bark beetle ecology decreased. These shifts may make trees more favorable for bark beetle attack rather than well defended, which one might conclude if only considering total monoterpene concentrations. Our results point to cumulative and synergistic effects of heat and drought that may reprioritize carbon allocation of specific non-structural carbohydrates toward defense.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Groundwater characterization and monitoring at a complex industrial waste site using electrical resistivity imaging

A contaminated industrial waste site in Washington State (USA) containing buried, metallic-waste storage tanks, pipes, and wells, was evaluated to determine the feasibility of monitoring groundwater remediation activities associated with an underlying perched aquifer system using electrical resistivity tomography. The perched aquifer, located ~65 m below ground surface and ~10 m above the regional water table, contains high concentrations of nitrate, uranium, and other contaminants of concern from past tank leaks and intentional releases of wastes to surface disposal sites. The extent of the perched water aquifer is not well known, and the effectiveness of groundwater extraction for contaminant removal is uncertain, so supplemental characterization and monitoring technologies are being evaluated. Numerical simulations of subsurface flow and contaminant transport were performed with a highly resolved model of the hydrogeologic system and waste site infrastructure, and these simulations were used as the physical basis for electrical resistivity tomography modeling. The modeling explicitly accounted for metallic infrastructure at the site. The effectiveness of using surface electrodes versus surface and horizontal subsurface electrodes, for imaging groundwater extraction from the perched water aquifer, was investigated. Although directional drilling is a mature technology, its use for electrode emplacement in the deep subsurface under a complex industrial waste site via horizontal wells has not yet been demonstrated. Results from this study indicate that using horizontal subsurface electrode arrays could significantly improve the ability of electrical resistivity tomography to image deep subsurface features and monitor remediation activities under complex industrial waste sites.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Unlocking plant-microbial interactions in deep Mollisols in the Midwestern US: Linking depth gradients in roots, microbial activity, and soil carbon in agroecosystems

Deep-rooted plants may build soil carbon (C) stocks, but most research has focused on shallow soils, leaving gaps in our understanding of how shifts in the balance between decomposition and C inputs drive soil C accumulation with depth. Thus, our objectives were to: (1) link depth gradients in root biomass with microbial activity and soil C stocks down to 1 m, and (2) examine the potential of simple C inputs to prime soil C across depths. To this end, we dug 5 quantitative soil pits in Argiudolls under mature perennial miscanthus plots in the SoyFACE Farm (Champaign-Urbana, IL). We added 13 C labeled glucose to our soils to determine the fate of simple C inputs with depth. We found that fine root biomass, total soil C, mineral-associated organic C (MAOC), particulate organic C (POC), and microbial activity (as measured by potential enzyme activity) declined with depth. POC declined more rapidly than MAOC, resulting in an increase in the ratio of MAOC-to-POC. Root biomass, enzyme activity (either acid phosphatase or n-acetyl-glucosaminadase) activity, and microbial respiration explained 74% and 38% of the variability in soil total C and MAOC, respectively, while POC was dependent on root biomass and microbial respiration (47%). Although the incorporation of simple 13 C inputs into MAOC was similar across depths, these inputs led to greater net MAOC losses in shallow soils than in deeper soils between 50 and 100 cm. The divergent impact of simple C inputs across depths may suggest that MAOC in shallow soils is more susceptible to priming losses, while C inputs into deep soils may instead be more persistent. Collectively, our results suggest that depth gradients in soil C stocks represents a balance between inputs, decomposition, and microbial necromass production and that increases in root C inputs by deep-rooted plants may have the potential to build stable MAOC.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2023

Effects of volitional emigration timing and smolt size on survival and age-at-return in a Pacific salmon hatchery population

Abstract Many Pacific salmon populations are returning from sea at younger ages and smaller sizes. Hatchery culture, management practices, and environmental factors influence juvenile release size and emigration timing, which in turn affect important demographic characteristics in returning adults. We analyzed data from approximately 345,000 tagged spring Chinook Salmon juveniles exiting Cle Elum Supplementation and Research Facility (Yakima River, Washington, USA) acclimation sites over thirteen brood years (2002–2014), evaluating smolt size, emigration timing, river flow, juvenile survival, and age-at-return. We observed a relationship between size and volitional exit timing of smolts from acclimation sites, with larger fish tending to emigrate earlier than smaller fish. Early emigration was also coincident with lower river flows near acclimation sites. Later emigration timing was correlated with an increase in apparent survival of juveniles to Bonneville Dam (500–530 km downstream of acclimation sites), but also with a lower rate of survival to return from sea. In general, for juveniles successfully emigrating downstream of Bonneville Dam, age-at-return increased with decreasing juvenile fish size and later emigration timing. Our results support a growing body of evidence that hatchery practices may result in larger smolts that tend to return at younger ages. Given the biological and economic consequences of younger age-at-maturation, methods to reverse this trend should be further explored and implemented.

Bosch, William J. (ORCID:0000000300447390)↗
DOE OSTI2024

A Gaussian process autoregressive model capturing microstructure evolution paths in a Ni–Mo–Nb alloy

Additive manufacturing is increasingly being employed to produce components of complex geometries in structural alloys because of the expected energy savings associated with the near-net-shape capability and the ability to build in novel internal features that are not possible with many conventional manufacturing approaches. However, because of the extreme thermal conditions encountered, the non-equilibrium microstructures produced during powder bed-based additive manufacturing processes must be subjected to custom post-heat treatment processes to recover the target mechanical properties. Phase-field models and simulation techniques have matured to a state where the microstructure evolution paths, and the morphologies of the resulting precipitate phases can be predicted reasonably accurately, considering alloy-specific thermodynamic and kinetic aspects of the nucleation and growth processes. However, phase-field simulations are computationally intensive, which precludes the ability to apply the simulations directly to the length scale of the entire component. Therefore, it is highly desirable to develop low-computational-cost surrogate models that effectively capture the physics at the microstructural length scale, while facilitating the design of optimized processing conditions resulting in location-specific targeted microstructures at the component scale. The work presented here demonstrates the application of the materials knowledge system framework to develop a surrogate model that effectively captures the microstructural path during annealing of a Ni–Mo–Nb alloy containing different Mo and Nb compositions known to segregate during solidification under additive manufacturing conditions. Specifically, the surrogate model built in this work is based on a Gaussian process autoregressive model informed by statistical representation of simulated microstructures using two-point correlations and dimensionality reduction through principal component analysis. In conclusion, this surrogate model is shown to capture the bifurcation of the microstructural path during precipitation, which yields a microstructure dominated by the $\gamma^{\prime\prime}$ phase at high Nb concentrations and the $\delta$ phase at low Nb concentrations.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Updated design of the CMB polarization experiment satellite LiteBIRD

Recent developments of transition-edge sensors (TESs), based on extensive experience in ground-based experiments, have been making the sensor techniques mature enough for their application on future satellite CMB polarization experiments. LiteBIRD is in the most advanced phase among such future satellites, targeting its launch in Japanese Fiscal Year 2027 (2027FY) with JAXA's H3 rocket. It will accommodate more than 4000 TESs in focal planes of reflective low-frequency and refractive medium-and-high-frequency telescopes in order to detect a signature imprinted on the cosmic microwave background (CMB) by the primordial gravitational waves predicted in cosmic inflation. The total wide frequency coverage between 34GHz and 448GHz enables us to extract such weak spiral polarization patterns through the precise subtraction of our Galaxy's foreground emission by using spectral differences among CMB and foreground signals. Telescopes are cooled down to 5Kelvin for suppressing thermal noise and contain polarization modulators with transmissive half-wave plates at individual apertures for separating sky polarization signals from artificial polarization and for mitigating from instrumental 1/f noise. Passive cooling by using V-grooves supports active cooling with mechanical coolers as well as adiabatic demagnetization refrigerators. Sky observations from the second Sun-Earth Lagrangian point, L2, are planned for three years. An international collaboration between Japan, USA, Canada, and Europe is sharing various roles. In May 2019, the Institute of Space and Astronautical Science (ISAS), JAXA selected LiteBIRD as the strategic large mission No. 2.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2022

Low Noise Frequency-Domain Multiplexing of TES Bolometers Using SQUIDs at Sub-Kelvin Temperature

Digital Frequency-Domain Multiplexing (DfMux) is a technique that uses MHz superconducting resonators and Superconducting Quantum Interference Device (SQUID) arrays to read out sets of transition edge sensors. DfMux has been used by several Cosmic Microwave Background experiments, including most recently POLARBEAR-2 and SPT-3 G with multiplexing factors as high as 68, and is the baseline readout technology for the planned satellite mission LiteBIRD. Here, we present recent work focused on improving DfMux readout noise, reducing parasitic impedance, and improving sensor operation. We have achieved a substantial reduction in stray impedance by integrating the sensors, resonators, and SQUID array onto a single-carrier board operated at 250 mK. This also drastically simplifies the packaging of the cryogenic components and leads to better-controlled crosstalk. We demonstrate a low readout noise level of 8.6 pA/Hz1 1/2 , which was made possible by operating the SQUID array at a reduced temperature and with a low dynamic impedance. This is a factor of two improvement compared to the achieved readout noise level in currently operating Cosmic Microwave Background experiments using DfMux and represents a critical step toward maturation of the technology for the next generation of instruments.

47 OTHER INSTRUMENTATION↗
DOE OSTI2023

BICEP Array: 150 GHz Detector Module Development

The Background Imaging of Cosmic Extragalactic Polarization (BICEP)/Keck (BK) collaboration is currently leading the quest for the highest-sensitivity measurements of the polarized cosmic microwave background (CMB) anisotropies on a degree scale with a series of cryogenic telescopes, of which BICEP Array (BA) is the latest Stage-3 upgrade with a total of ~ 32,000 detectors. The instrument comprises 4 receivers spanning 30–270 GHz, with the low-frequency 30/40 GHz deployed to the South Pole Station in late 2019. The full complement of receivers is forecast to set the most stringent constraints on the tensor-to-scalar ratio r. Building on these advances, the overarching small-aperture telescope concept is already being used as the reference for further Stage-4 experiment design. This paper describes the development of the BICEP Array 150 GHz detector module and its fabrication requirements, with highlights on the high-density time division multiplexing (TDM) design of the cryogenic circuit boards. The low-impedance wiring required between the detectors and the frst stage of superconducting quantum interference device amplifers is crucial to maintaining a stable bias current on the detectors. Here, a novel multilayer FR4 Printed Circuit Board with superconducting traces, capable of reading out up to 648 detectors, is detailed along with its validation tests. An ultra-high-density TDM detector module concept we developed for a CMB-S4-like experiment that allows up to 1920 detectors to be read out is also presented. TDM has been chosen as the detector readout technology for the Cosmic Microwave Background Stage-4 (CMB-S4) experiment based on its proven low-noise performance, predictable costs, and overall maturity of the architecture. The heritage for TDM is rooted in mm- and sub-mm-wave experiments dating back 20 years and has since evolved to support a multiplexing factor of 64x in Stage-3 experiments.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Results and Limits of Time-Division Multiplexing for the BICEP Array High-Frequency Receivers

Time-division multiplexing is the readout architecture of choice for many ground and space experiments, as it is a very mature technology with proven outstanding low-frequency noise stability, which represents a central challenge in multiplexing. Once fully populated, each of the two BICEP Array high-frequency receivers, observing at 150 GHz and 220/270 GHz, will have 7776 TES detectors tiled on the focal plane. The constraints set by these two receivers required a redesign of the warm readout electronics. The new version of the standard multichannel electronics, developed and built at the University of British Columbia, is presented here for the first time. BICEP Array operates time-division multiplexing readout technology to the limits of its capabilities in terms of multiplexing rate, noise and cross talk, and applies them in rigorously demanding scientific application requiring extreme noise performance and systematic error control. Finally, future experiments like CMB-S4 plan to use TES bolometers with time-division/SQUID-based readout for an even larger number of detectors.

47 OTHER INSTRUMENTATION↗
DOE OSTI2021

Impacts of The Wetland Sedge Carex aquatilis on Microbial Community and Methane Metabolisms

Microbial activity in the soil of wetlands is responsible for the emission of more methane to the atmosphere than all other natural sources combined. This microbial activity is heavily impacted by plant roots, which influence the microbial community by exuding organic compounds and by leaking oxygen into an otherwise anoxic environment. This study compared the microbial communities of planted and unplanted wetland soil from an Alaskan bog to elucidate how plant growth influences populations and metabolisms of methanogens and methanotrophs. A common boreal wetland sedge, Carex aquatilis, was grown in the laboratory and DNA samples were sequenced from the rhizosphere, unplanted bulk soil, and a simulated rhizosphere with oxygen input but no organic carbon. The abundance of both methanogens and methanotrophs were positively correlated with methane emissions. Among the methanotrophs, both aerobic and anaerobic methane oxidizing microbes were more common in the rhizosphere of mature plants than in unplanted soil, while facultative methanotrophs capable of utilizing either methane or other molecules became relatively less common. Furthermore, these trends indicate that the roots in this experiment created an environment which favored highly specialized microbial metabolisms over generalist approaches. One aspect of this specialized microbiome is the presence of both aerobic and anaerobic metabolisms, which indicates that oxygen is present but is a limiting resource controlling competition.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Interspecific variation in the timing and magnitude of hydraulic redistribution in a forest with distinct water sources

Trees regulate water availability among their rooting strata through a nocturnal, passive transference of water known as hydraulic redistribution (HR). This study investigates differences in HR and groundwater use among common canopy species in longleaf pine (Pinus palustris Mill., Pinaceae) woodlands and explores environmental factors influencing HR. HR was estimated by sap flux of lateral roots and main stems of three mature canopy species (P. palustris, Quercus laevis Walter., Fagaceae and Quercus margarettae Ashe., Fagaceae). We used δ18O and δD of xylem water, soil water, and groundwater to determine water source. Finally, we related HR to environmental factors (Temperature, VWC, VPD) to better understand controls of HR dynamics. Pinus palustris had higher water use than either Quercus species, and also redistributed significantly more water as a nocturnal subsidy. HR fluxes were inversely related with mean nightly temperature and independent of shallow soil moisture. Stable isotope mixing models, based on δ 18 O and δD, indicated that all species have access to groundwater, but utilized shallow soil water in differing amounts when available. In systems with strong water potential gradients among soil strata, any species with access to a groundwater source is likely capable of HR; however, the magnitude of HR varies significantly by species, even among closely related taxa.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Rice husk and charred husk amendments increase porewater and plant Si but water management determines grain As and Cd concentration

Abstract Purpose Rice is a staple crop worldwide and a silicon (Si) hyperaccumulator with Si levels reaching 5–10% of its mass; this can result in desilication and Si-deficiency if plant residues are not managed correctly. Rice is also uniquely subject to arsenic (As) and cadmium (Cd) contamination depending on soil conditions. Our goal is to quantify the effects of rice husk (a Si-rich milling byproduct) amendments and different water management strategies on rice uptake of Si, As, and Cd. Methods We employed 4 husk amendment treatments: Control (no husk), Husk (untreated husk), Biochar (husk pyrolyzed at 450 °C), and CharSil (husk combusted at > 1000 °C). Each of these amendments was studied under nonflooded, alternate wetting and drying (AWD), and flooded water management in a pot study. Porewater chemistry and mature plant elemental composition were measured. Results Husk and Biochar treatments, along with flooding, increased porewater and plant Si. Vegetative tissue As decreased with increasing porewater Si, but grain As and plant Cd were primarily controlled by water management. Grain As and Cd were inversely correlated and are simultaneously minimized in a redox potential (Eh) range of 225–275 mV in the studied soil. Ferrihydrite in root iron plaque decreased As translocation from porewater to grain, but amendments were not able to increase plaque ferrihydrite content. Conclusion We conclude moderate husk amendment rates (i.e., 4 years’ worth) with minimal pretreatment strongly increases rice Si content but may not be sufficient to decrease grain As in low Si and As soil.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Delayed leaf greening involves a major shift in the expression of cytosolic and mitochondrial ribosomes to plastid ribosomes in the highly phosphorus-use-efficient Hakea prostrata (Proteaceae)

Abstract Background and aims Hakea prostrata (Proteaceae) is a highly phosphorus-use-efficient plant native to southwest Australia. It maintains a high photosynthetic rate at low leaf phosphorus (P) and exhibits delayed leaf greening, a convergent adaptation that increases nutrient-use efficiency. This study aimed to provide broad physiological and gene expression profiles across leaf development, uncovering pathways leading from young leaves as nutrient sinks to mature leaves as low-nutrient, energy-transducing sources. Methods To explore gene expression underlying delayed greening, we analysed a de novo transcriptome for H. prostrata across five stages of leaf development. Photosynthesis and respiration rates, and foliar pigment, P and nitrogen (N) concentrations were determined, including the division of P into five biochemical fractions. Key results Transcripts encoding functions associated with leaf structure generally decreased in abundance across leaf development, concomitant with decreases in foliar concentrations of 85% for anthocyanins, 90% for P and 70% for N. The expression of genes associated with photosynthetic function increased during or after leaf expansion, in parallel with increases in photosynthetic pigments and activity, much later in leaf development than in species that do not have delayed greening. As leaves developed, transcript abundance for cytosolic and mitochondrial ribosomal proteins generally declined, whilst transcripts for chloroplast ribosomal proteins increased. Conclusions There was a much longer temporal separation of leaf cell growth from chloroplast development in H. prostrata than is found in species that lack delayed greening. Transcriptome-guided analysis of leaf development in H. prostrata provided insight into delayed greening as a nutrient-saving strategy in severely phosphorus-impoverished landscapes.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Comparison of PsbQ and Psb27 in photosystem II provides insight into their roles

Photosystem II (PSII) catalyzes the oxidation of water at its active site that harbors a high-valent inorganic Mn 4 CaO x cluster called the oxygen-evolving complex (OEC). Extrinsic subunits generally serve to protect the OEC from reductants and stabilize the structure, but diversity in the extrinsic subunits exists between phototrophs. Recent cryo-electron microscopy experiments have provided new molecular structures of PSII with varied extrinsic subunits. We focus on the extrinsic subunit PsbQ, that binds to the mature PSII complex, and on Psb27, an extrinsic subunit involved in PSII biogenesis. PsbQ and Psb27 share a similar binding site and have a four-helix bundle tertiary structure, suggesting they are related. Here, we use sequence alignments, structural analyses, and binding simulations to compare PsbQ and Psb27 from different organisms. We find no evidence that PsbQ and Psb27 are related despite their similar structures and binding sites. Evolutionary divergence within PsbQ homologs from different lineages is high, probably due to their interactions with other extrinsic subunits that themselves exhibit vast diversity between lineages. This may result in functional variation as exemplified by large differences in their calculated binding energies. Psb27 homologs generally exhibit less divergence, which may be due to stronger evolutionary selection for certain residues that maintain its function during PSII biogenesis which is consistent with their more similar calculated binding energies between organisms. Previous experimental inconsistencies, low confidence binding simulations, and recent structural data suggest that Psb27 is likely to exhibit flexibility that may be an important characteristic of its activity. Furthermore, the analysis provides insight into the functions and evolution of PsbQ and Psb27, and an unusual example of proteins with similar tertiary structures and binding sites that probably serve different roles.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Psb27, a photosystem II assembly protein, enables quenching of excess light energy during its participation in the PSII lifecycle

Photosystem II (PSII), the enzyme responsible for oxidizing water into molecular oxygen, undergoes a complex lifecycle during which multiple assembly proteins transiently bind to and depart from PSII assembly intermediate complexes. Psb27 is one such protein. It associates with the CP43 chlorophyll-binding subunit of PSII to form a Psb27-PSII sub-complex that constitutes 7–10% of the total PSII pool. Psb27 remains bound to PSII assembly intermediates and dissociates prior to the formation of fully functional PSII. In this study, we compared a series of Psb27 mutant strains in the cyanobacterium Synechocystis sp. PCC 6803 with varied expression levels of Psb27: wild type (WT); psb27 genetic deletion (Del27), genetically complemented psb27 (Com27); and over-expressed Psb27 (OE27). The Del27 strain demonstrated decreased non-photochemical fluorescence quenching, while the OE27 strain showed increased non-photochemical quenching and tolerance to fluctuating light conditions. Multiple flashes and fluorescence decay analysis indicated that OE27 has the least affected maximum PSII quantum yield of the mutants. OE27 also displayed a minimal impact on the half-life of the fast component of QA – reoxidation over multiple flashes, indicating robust PSII function. Further, we propose that the close association between Psb27 and CP43, and the absence of a fully functional manganese cluster in the Psb27-PSII complex create a PSII sub-population that dissipates excitation energy prior to its recruitment into the functional PSII pool. Efficient energy dissipation prevents damage to this pre-PSII pool and allows for efficient PSII repair and maturation. Participation of Psb27 in the PSII life cycle ensures high-quality PSII assembly.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

High-Throughput Statistical Interrogation of Mechanical Properties with Build Plate Location and Powder Reuse in AlSi10Mg

Abstract Additive manufacturing (AM) allows agile, rapid manufacturing of geometrically complex components that would otherwise be impossible through traditional manufacturing methods. With this maturing manufacturing technology comes the need to adopt testing methods that are commensurate with the speed of additive manufacturing and take advantage of its geometric flexibility. High-throughput tensile testing (HTT) is a technique that allows a large number of tensile bars to be tested in a short amount of time. In the present study, HTT is used to evaluate AM AlSi10Mg produced using powder bed fusion with a Renishaw AM250 machine. Three parameters were varied in this study: (1) powder reuse history, (2) location on the build plate, and (3) size of the tensile specimen. For all parameter combinations, at least 22 specimens were tested; in several cases, over 40 were tested. This large dataset, consisting of over 500 tensile tests, permits Weibull statistical analysis and provides sufficient fidelity to isolate subtle trends that would have likely been missed in smaller, traditional datasets. The observed trends are rationalized in terms of the role of porosity and surface crust on mechanical response.

Carroll, Jay D. (ORCID:0000000258184709)↗