Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “materials aging”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

Measuring the x-ray irradiated degradation of PMMA through FTIR and 2D-COS analysis

To combat issues arising from polymer aging studies which include wasting valuable time and resources, Two-Dimensional Correlation Spectroscopy (2D-COS) has been observed to identify accelerated aging conditions in materials in a very short timeframe. This study is attempting to validate 2D-COS as a viable technique for aging studies by measuring the degradation of PMMA via x-ray radiation. PMMA has been previously observed to degrade via main chain scission under x-ray radiation, and similar results have possibly been seen in this study. More work needs to be done to collect reliable data, including finalizing a standard operating procedure and normalizing raw data so that noise is not recognized as spectral change by the extremely sensitive 2D-COS software.

36 MATERIALS SCIENCE↗

Leveraging Available Data to Support Extension of Transportation Packages Service Life

Data obtained from testing shipping package materials have been leveraged to support extending the service life of select shipping packages while in nuclear materials transportation. Increasingly, nuclear material inventories are being transferred to an interim storage location where they will reside for extended periods of time. Use of a shipping package to store nuclear materials in an interim storage location has become more attractive for a variety of reasons. Shipping packages are robust and have a qualified pedigree for their performance in normal operation and accident conditions within the approved shipment period and storing nuclear material within a shipping package results in reduced operations for the storage facility. However, the shipping package materials of construction must maintain a level of integrity as specified by the safety basis of the storage facility through the duration of the storage period, which is typically well beyond the one year transportation window. Test programs have been established to obtain aging data on materials of construction that are the most sensitive/susceptible to aging in certain shipping package designs. The collective data are being used to support extending the service life of shipping packages in both transportation and storage.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Soft Materials Solutions for Future Needs

Background: Rapid heating of polymer components can have catastrophic effects, such as contained vaporization, which are poorly understood. Hostile environment effects on stockpile-aged or new materials need study. Need: Elucidate chemical and physical changes using scientifically rigorous surrogate stimuli, and in situ techniques. Bulk and surface phenomena must be distinguished. Required diagnostics are impractical at large user facilities. Goal and Vision: Identify failure mechanisms and test materials of diverse pedigrees (stockpile, candidate replacement) using a local, adaptable, high throughput testing capability, integrated with modeling.

36 MATERIALS SCIENCE↗

Dynamics of Delayed p53 Mutations in Mice Given Whole-Body Irradiation at 8 Weeks

Purpose: Ionizing irradiation might induce delayed genotoxic effects in a p53-dependent manner. However, a few reports have shown a p53 mutation as a delayed effect of radiation. In this study, we investigated the p53 gene mutation by the translocation frequency in chromosome 11, loss of p53 alleles, p53 gene methylation, p53 nucleotide sequence, and p53 protein expression/phosphorylation in p53{sup +/+} and p53{sup +/-} mice after irradiation at a young age. Methods and Materials: p53{sup +/+} and p53{sup +/-} mice were exposed to 3 Gy of whole-body irradiation at 8 weeks of age. Chromosome instability was evaluated by fluorescence in situ hybridization analysis. p53 allele loss was evaluated by polymerase chain reaction, and p53 methylation was evaluated by methylation-specific polymerase chain reaction. p53 sequence analysis was performed. p53 protein expression was evaluated by Western blotting. Results: The translocation frequency in chromosome 11 showed a delayed increase after irradiation. In old irradiated mice, the number of mice that showed p53 allele loss and p53 methylation increased compared to these numbers in old non-irradiated mice. In two old irradiated p53{sup +/-} mice, the p53 sequence showed heteromutation. In old irradiated mice, the p53 and phospho-p53 protein expressions decreased compared to old non-irradiated mice. Conclusion: We concluded that irradiation at a young age induced delayed p53 mutations and p53 protein suppression.

63 RADIATION, THERMAL, AND OTHER ENVIRON. POLLUTAN↗

Polymer Aging/Characterization Core Capability Enhancement is Underway (Progress Summary)

Motivation: Accelerated aging of polymeric materials is needed to predict their long-term mechanical functionality. Two key metrics used to evaluate their performance are compression set and load retention. Currently, specimens are aged under compressive strain at four different temperatures (25, 40, 55, and 70°C) for 1-2 years, and compression set and load retention are measured at various timepoints. At each timepoint, specimens are measured at three different relaxation times (immediately, 1 hr, and 24 hrs) after removal from the aging fixtures. The measurements include both thickness measurement and load testing. Time-temperature superposition (TTS) is applied to the isothermal data to obtain long-term predictions. There is a desire to reduce both the length of the studies and the amount of effort required to perform the studies. Significance: Additional aging ovens will provide the opportunity to add a higher fifth temperature, which could reduce the length of accelerated aging studies, as well as provide a spare oven in case one fails. If determined to be feasible, instrumented aging fixtures could reduce the amount of effort required to perform the studies, potentially eliminating the need to remove the specimens from the fixtures. Progress: Two new aging ovens have been received. The controllers were verified to be operational. The nitrogen purge still needs to be verified. Instrumented aging fixtures potentially including gap adjustment (to set the aging strain and measure specimen thickness) and a load transducer are under consideration.

36 MATERIALS SCIENCE↗

Thermal Performance of Aged and Weathered Spray-On Foam Insulation (SOFI) Materials Under Cryogenic Vacuum Conditions (Cryostat-4)

The NASA Cryogenics Test Laboratory at Kennedy Space Center conducted long-term testing of SOFI materials under actual-use cryogenic conditions with Cryostat-4. The materials included in the testing were NCFI 24-124 (acreage foam), BX-265 (close-out foam, including intertank flange and bipod areas), and a potential alternate material, NCFI 27-68, (acreage foam with the flame retardant removed). Specimens of these materials were placed at two locations: a site that simulated aging (the Vehicle Assembly Building [VAB]) and a site that simulated weathering (the Atmospheric Exposure Test Site [beach site]). After aging/weathering intervals of 3, 6, and 12 months, the samples were retrieved and tested for their thermal performance under cryogenic vacuum conditions with test apparatus Cryostat-4.

Source record↗

Tracking Aging in Nuclear Electrical Cable Polymers

The electrical cable network is the nerve center of a nuclear plant, providing power, instrumentation and control of critical systems during operation, planned outage, and during design basis, unplanned outage events. It is therefore important to manage cable system health through awareness of local environments adverse to cable longevity, monitoring of cable condition, and predictive understanding of cable degradation [1-3]. Nondestructive methods can be used to assess the condition of the full length of installed cables and of localized cable regions to support cable repair and replacement planning decisions [4-5]. Informed knowledge of the effects of environment on cable performance over time combined with cable state assessment data can minimize costs associated with cable management by both avoiding outages and ramifications from unexpected cable failure and by avoiding premature replacement of functional cables. In this work, the aging behavior of commonly found nuclear cable insulation and jacketing materials is investigated along with established and emerging methods for locating and quantifying cable degradation. Ethylene-propylene rubber (EPR) and chlorinated polyethylene (CPE), examples of prevalent insulation and jacket materials used in nuclear power plants (NPPs), are thermally aged at elevated temperature to induced material changes similar to those experienced by cable material under long term service conditions. Destructive and nondestructive laboratory tests are used to follow changes in the materials with aging toward establishing predictive capabilities to help extend the life of installed nuclear cables and reduce cable management operational costs.

Cable aging, EPR, CPE, NDE, nuclear↗

Effects of Thermal Aging on the Fracture Toughness of Cast Stainless Steel CF8

Cast stainless steels are widely used in the primary coolant systems of nuclear power plants because of their high strength, toughness, and corrosion resistance. Mechanical property degradation in the steels, primarily due to a thermally-embrittled ferrite, is of major concern in an extended-term operation. To investigate the aging-induced loss of fracture resistance in cast stainless steels, static fracture resistance (J-R) testing was performed for three different CF8 cast stainless steels with significantly different d-ferrite contents. The materials were thermally-aged at 290-400°C for up to 10kh and fracture-tested at 25-400°C. It was found that the fracture toughness in high-ferrite materials generally decreased with thermal aging while the relationship between aging and fracture toughness in low-ferrite materials was rather complicated, showing non-monotonic variation with the degree of aging. While significant degradation was observed for the highly-aged high-ferrite materials, no material was observed having a K0.2mm less than 100 MPavm.

Collins, David A.↗

Effects of cold predeformation on dissolution of second-phase Al2Cu particles during solution treatment of 2219 Al-Cu alloy forgings

Highlights: • Cold predeformation (CPD) was performed on 2219 Al-Cu alloy forgings. • CPD promoted the dissolution of coarse Al{sub 2}Cu particles during solution treatment. • CPD increased the driving force to precipitate θ′ phases during aging treatment. • Increasing CPD improved the tensile properties of the forgings. - Abstract: Cold predeformation (CPD, before solution treatment) at different pre-compressing deformations of 0, 5, and 10% was performed on 2219 Al-Cu alloy forgings, and its effect on the dissolution of second-phase Al{sub 2}Cu particles during solution treatment was investigated. The results indicated that a higher number of coarse Al{sub 2}Cu particles dissolved in the Al matrix during solution treatment in samples processed with CPD. Upon increasing CPD from 0 to 10%, the area fraction of the coarse particles decreased from 2.57 to 0.57%, while their mean size decreased from 12.5 to 8.7 μm. The corresponding driving force for precipitation during the subsequent aging treatment process increased, the main precipitates in the material transitioned from the θ″ phase to the θ′ phase, and the area fraction of the precipitates increased from 6.1 to 18.1%. As a result, a significant increase in ultimate tensile strength (by 61.2 MPa), yield strength (by 63.2 MPa), and tensile elongation (by 2.2%) was obtained.

36 MATERIALS SCIENCE↗

Pb-207/Pb-206 ages of individual mineral phases in Luna 20 material by ion microprobe mass analysis.

Ion microprobe analyses of returned lunar material have helped to demonstrate that U, Th, and radiogenic Pb are concentrated in small accessory mineral phases. It is possible to measure the isotopic composition of this Pb and obtain a radiometric Pb-207/Pb-206 age for the mineral. The ages so derived compare favorably with crystallization ages determined by conventional methods. A grain mount (22003,2/6) of Luna 20 material was searched for such accessory mineral phases, and two were found. One of these phases give an age of 4.12 plus or minus 0.04 b.y. and the other an age of 4.42 plus or minus 0.11 b.y. Ages of minerals dated by the ion probe in Apollo samples 14310 and 15555 are given for comparison. Data on the upper limit for Pb concentration in the outermost surface layers of free lunar soil particles are also given.

Andersen, C. A.↗

Strength Differential Measured in Inconel 718: Effects of Hydrostatic Pressure Studied

Aeropropulsion components, such as disks, blades, and shafts, are commonly subjected to multiaxial stress states at elevated temperatures. Experimental results from loadings as complex as those experienced in service are needed to help guide the development of accurate viscoplastic, multiaxial deformation models that can be used to improve the design of these components. During a recent study on multiaxial deformation (ref. 1) on a common aerospace material, Inconel 718, it was shown that the material in the aged state exhibits a strength differential effect (SDE), whereby the uniaxial compressive yield and subsequent flow behavior are significantly higher than those in uniaxial tension. Thus, this material cannot be described by a standard von Mises yield formulation. There have been other formulations postulated (ref. 2) that involve other combinations of the stress invariants, including the effect of hydrostatic stress. The question remained as to which invariants are necessary in the flow model. To capture the physical mechanisms occurring during deformation and reflect them in the plasticity formulation, researchers examined the flow of Inconel 718 under various amounts of hydrostatic stress to determine whether or not hydrostatic stress is needed in the formulation. Under NASA Grant NCC3-464, monitored by the NASA Glenn Research Center, a series of tensile tests were conducted at Case Western Reserve University on aged (precipitation hardened) Inconel 718 at 650 C and with superimposed hydrostatic pressure. Dogbone shaped tensile specimens (3-mm-diameter gauge by 16-mm gauge length) and cylindrical compression specimens (3-mm-diameter gauge by 6-mm gauge length) were strain gauged and loaded in a high-pressure testing apparatus. Hydrostatic pressures were obtained with argon and ranged from 210 to 630 MPa. The aged Inconel 718 showed a pronounced difference in the tension and compression yield strength (i.e., an SDE), as previously observed. Also, there were no significant effects of hydrostatic pressure on either the tensile and compressive yield strength (see the graph) or on the magnitude of the SDE. This behavior is not consistent with the pressure-dependent theory of the SDE, which postulates that the SDE is associated with pressure-dependent and/or internal friction dependent deformation associated with non-Schmid effects at the crystal level (refs. 3 and 4). Flow in Inconel 718 appears to be independent of hydrostatic pressure, suggesting that this invariant may be removed from the phenomenological constitutive model. As part of an ongoing effort to develop advanced constitutive models, Glenn s Life Prediction Branch coordinated this work with that of research on the multiaxial deformation behavior of Inconel 718 being conducted at Pennsylvania State University under NASA Grant NCC597.

Lewandowski, John J.↗

Biocrude oils from the fast pyrolysis of poultry litter and hardwood

The safe and economical disposal of poultry litter is becoming a major problem for the USA poultry industry. Current disposal methods such as land application and feeding to cattle are now under pressure because of pollution of water resources due to leaching, runoffs and concern for mad cow disease contamination of the food chain. Incineration or combustion is potentially applicable to large scale operations, but for small scale growers and EPA non-attainment areas, this is not a suitable option because of the high cost of operation. Thus, there is a need for developing appropriate technologies to dispose poultry litter. Poultry litters from broiler chicken and turkey houses, as well as bedding material were converted into biocrude oil in a fast pyrolysis fluidized bed reactor. The biocrude oil yields were relatively low ranging from 36 wt% to 50 wt% depending on the age and bedding material content of the litter. The bedding material (which was mostly hardwood shavings) biocrude oil yield was 63 wt%. The higher heating value (HHV) of the poultry litter biocrude oils ranged from 26 MJ/kg to 29 MJ/kg while that of the bedding material was 24 MJ/kg. The oils had relatively high nitrogen content ranging from 4 wt% to 8 wt%, very low sulfur (<1 wt%) content and high viscosity. The viscosities of the oils appeared to be a function of both the source of litter and the pyrolysis temperature. The biochar yield ranged from 27 wt% to 40 wt% depending on the source, age and composition of the poultry litter. The biochar ash content ranged from 24 wt% to 54 wt% and was very rich in inorganic components such as potassium and phosphorous.

54 ENVIRONMENTAL SCIENCES↗

Effects of Hygrothermal Cycling on the Chemical, Thermal, and Mechanical Properties of 862/W Epoxy Resin

The hygrothermal aging characteristics of an epoxy resin were characterized over 1 year, which included 908 temperature and humidity cycles. The epoxy resin quickly showed evidence of aging through color change and increased brittleness. The influence of aging on the material s glass transition temperature (Tg) was evaluated by Differential Scanning Calorimetry (DSC) and Dynamic Mechanical Analysis (DMA). The Tg remained relatively constant throughout the year long cyclic aging profile. The chemical composition was monitored by Fourier Transform Infrared Spectroscopy (FTIR) where evidence of chemical aging and advancement of cure was noted. The tensile strength of the resin was tested as it aged. This property was severely affected by the aging process in the form of reduced ductility and embrittlement. Detailed chemical evaluation suggests many aging mechanisms are taking place during exposure to hygrothermal conditions. This paper details the influence of processes such as: advancement of cure, chemical degradation, and physical aging on the chemical and physical properties of the epoxy resin.

Miller, Sandi G.↗

Aging in the relaxor and ferroelectric state of Fe-doped (1-x)(Bi{sub 1/2}Na{sub 1/2})TiO₃-xBaTiO₃ piezoelectric ceramics

Aging of piezoelectric properties was investigated in lead-free (1–x)(Bi{sub 1/2}Na{sub 1/2})TiO₃-xBaTiO₃ doped with 1at.% Fe. The relaxor character of the un-poled material prevents macroscopic aging effects, while in the field-induced ferroelectric phase aging phenomena are similar to those found in lead zirconate titanate or barium titanate. Most prominent aging effects are the development of an internal bias field and the decrease of switchable polarization. These effects are temperature activated, and can be explained in the framework of defect complex reorientation. This picture is further supported by electron paramagnetic resonance spectra indicating the existence of (Fe{sub Ti}´-V{sub O}{sup ••}){sup •} defect complexes in the Fe-doped material.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Heat Management Strategy Trade Study

This Heat Management Trade Study was performed in 2008-2009 to expand on prior studies in continued efforts to analyze and evaluate options for cost-effectively managing SNF reprocessing wastes. The primary objective was to develop a simplified cost/benefit evaluation for spent nuclear fuel (SNF) reprocessing that combines the characteristics of the waste generated through reprocessing with the impacts of the waste on heating the repository. Under consideration were age of the SNF prior to reprocessing, plutonium and minor actinide (MA) separation from the spent fuel for recycle, fuel value of the recycled Pu and MA, age of the remaining spent fuel waste prior to emplacement in the repository, length of time that active ventilation is employed in the repository, and elemental concentration and heat limits for acceptable glass waste form durability. A secondary objective was to identify and qualitatively analyze remaining issues such as (a) impacts of aging SNF prior to reprocessing on the fuel value of the recovered fissile materials, and (b) impact of reprocessing on the dose risk as developed in the Yucca Mountain Total System Performance Assessment (TSPA). Results of this study can be used to evaluate different options for managing decay heat in waste streams from spent nuclear fuel.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Consequences of thermo- and photo-oxidation on end-use properties of pure PE

Thin films of polyethylene have been exposed to thermal and photochemical accelerated agings at different temperatures and different UV intensities. In both cases, mechanical tests performed on aged samples revealed a severe embrittlement of the PE material. However, a multi-scale analysis showed that i) under thermal oxidative conditions, such embrittlement mainly resulted from a reduction of molecular mobility of the amorphous phase due to annealing phenomena, while ii) it was rather associated to a competition between chain scission and cross-linking processes under photo-oxidative conditions. As regards the oxidation mechanisms, it was found that thermo-oxidation is clearly initiated by a bimolecular decomposition of hydroperoxides, while photo-oxidation seems rather initiated by the photolysis of ketones and hydroperoxides. Over a critical threshold of the hydroperoxide concentration, thermolysis of hydroperoxides seems to predominate and even to control the overall photo-oxidation kinetics.

36 MATERIALS SCIENCE↗

Mind the gap: Bridging the divide between AI aspirations and the reality of autonomous microscopy

What does materials science look like in the “Age of Artificial Intelligence?” Each material’s domain—synthesis, characterization, and modeling—has a different answer to this question, motivated by unique challenges and constraints. This work focuses on the tremendous potential of autonomous characterization within electron microscopy. We present our recent advancements in developing domain-aware, multimodal models for microscopy analysis capable of describing complex atomic systems. We then address the critical gap between the theoretical promise of autonomous microscopy and its current practical limitations, showcasing recent successes while highlighting the necessary developments to achieve robust, real-world autonomy.

2D materials↗