Linear accelerator frequency control system Patent
Linear accelerator frequency control system
Gilkison, C. A.↗
SEARCH · Engineering Papers
Results for “linear systems”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Some existence and sufficient conditions of optimality
The role of the existence and sufficiency conditions in the field of optimal control was briefly described. The existence theorems are discussed for general nonlinear systems. However, the sufficiency conditions pertain to "nearly" linear systems with integral convex costs. Moreover, a brief discussion of linear systems with multiple-cost functions is presented.
Assefi, T.↗
Computer-aided-analysis of linear control system robustness
Stochastic robustness is a simple technique used to estimate the stability and performance robustness of linear, time-invariant systems. The use of high-speed graphics workstations and control system design software in stochastic robustness analysis is discussed and demonstrated. It is shown that stochastic robustness makes good use of modern computational and graphic tools, and it is easily implemented using commercial control system design and analysis software.
Stengel, Robert F.↗
Filtering for linear distributed parameter systems
Filtering for linear distributed parameter systems
Kushner, H. J.↗
Computation of output feedback gains for linear stochastic systems using the Zangnill-Powell Method
Because conventional optimal linear regulator theory results in a controller which requires the capability of measuring and/or estimating the entire state vector, it is of interest to consider procedures for computing controls which are restricted to be linear feedback functions of a lower dimensional output vector and which take into account the presence of measurement noise and process uncertainty. To this effect a stochastic linear model has been developed that accounts for process parameter and initial uncertainty, measurement noise, and a restricted number of measurable outputs. Optimization with respect to the corresponding output feedback gains was then performed for both finite and infinite time performance indices without gradient computation by using Zangwill's modification of a procedure originally proposed by Powell. Results using a seventh order process show the proposed procedures to be very effective.
Kaufman, H.↗
Computation of output feedback gains for linear stochastic systems using the Zangwill-Powell method
Because conventional optimal linear regulator theory results in a controller which requires the capability of measuring and/or estimating the entire state vector, it is of interest to consider procedures for computing controls which are restricted to be linear feedback functions of a lower dimensional output vector and which take into account the presence of measurement noise and process uncertainty. To this effect a stochastic linear model has been developed that accounts for process parameter and initial uncertainty, measurement noise, and a restricted number of measurable outputs. Optimization with respect to the corresponding output feedback gains was then performed for both finite and infinite time performance indices without gradient computation by using Zangwill's modification of a procedure originally proposed by Powell.
Kaufman, H.↗
Krylov subspace methods - Theory, algorithms, and applications
Projection methods based on Krylov subspaces for solving various types of scientific problems are reviewed. The main idea of this class of methods when applied to a linear system Ax = b, is to generate in some manner an approximate solution to the original problem from the so-called Krylov subspace span. Thus, the original problem of size N is approximated by one of dimension m, typically much smaller than N. Krylov subspace methods have been very successful in solving linear systems and eigenvalue problems and are now becoming popular for solving nonlinear equations. The main ideas in Krylov subspace methods are shown and their use in solving linear systems, eigenvalue problems, parabolic partial differential equations, Liapunov matrix equations, and nonlinear system of equations are discussed.
Sad, Youcef↗
Discretized partial differential equations - Examples of control systems defined on modules
The purpose of this paper is to show how the important problems of linear system theory can be solved concisely for a particular class of linear systems, namely block circulant systems, by exploiting the algebraic structure. This type of system arises in lumped approximations to linear partial differential equations. The computation of the transition matrix, the variation of constants formula, observability, controllability, pole allocation, realization theory, stability and quadratic optimal control are discussed. In principle, all questions which are solved here could also be solved by standard methods; the present paper clearly exposes the structure of the solution, and thus permits various savings in computational effort.
Brockett, R. W.↗
Minimum fuel attitude control of a non-linear satellite system
Nonlinear satellite system attitude control for minimum fuel consumption, deriving linear programming algorithm based on optimal control theory
Wolske, G. D.↗
A general formulation of linear feedback communication systems with solutions.
Linear feedback additive noise communication systems formulated in terms of arbitrary operations at transmitting and receiving points
Butman, S.↗
A Critical Examination of Wind-Wave Spectral Functional Form
Traditionally, data from random ocean waves are presented in spectral functions. The spectra are the result of Fourier analysis. Fourier spectral analysis has dominated data analysis for, at least, the last hundred years. It has been the standard method for is examining the global amplitude-frequency distributions. Although Fourier transform valid under extremely general conditions, there are some crucial restrictions for the Fourier spectral analysis. The system must be linear, and the data must be stationary- otherwise, the resulting spectrum will make little physical sense. The stationarity requirement is also a common required criterion for most of other available data analysis methods. Nevertheless, few, if any, natural phenomena are linear and stationary. To compound these complications is the imperfection of our probes or numerical schemes the interactions of the imperfect probes even with a perfect linear system can make the final data nonlinear. Furthermore, all the available data are usually of finite duration. Under these conditions, Fourier analysis is of limited use, For lack of alternatives, however, Fourier analysis is still used to process such data. The loose application of Fourier analysis and the insouciant adoption of the stationary and linear assumptions may lead to misleading conclusions. Ocean waves are know to be nonlinear, and the wind system generating the wave field are seldom stationary- As a result, the traditional examination of the spectral form hardly made physical sense. A new method for analyzing nonlinear and nonstationary data has been developed. The key part is the Empirical Mode Decomposition (EMD) method with which any complicated data set can be decomposed into a finite and often small number of Intrinsic Mode Functions (IMF) that serve as the basis of the representation of the data, This decomposition method is adaptive, and, therefore, highly efficient. The IMFs admit well-behaved Hilbert transforms, and yield instantaneous energy and frequency as functions of time that give sharp identifications of imbedded structures. The final presentation of the results is an energy-frequency-time distribution, designated as the Hilbert Spectrum. Among the main conceptual innovations is the introduction of the instantaneous frequencies for complicated data sets, which eliminate the need of spurious harmonics to represent nonlinear and nonstationary signals. The spectral forms of the ocean waves are very different. This new method offers the first physical meaningful view of the wave spectrum. Data from laboratory and field will be presented to illustrate the differences.
Huang, Norden E.↗
On the determination of optimal costly measurement strategies for linear stochastic systems.
This paper presents the formulation of a class of optimization problems dealing with selecting, at each instant of time, one measurement provided by one out of many sensors. Each measurement has an associated measurement cost. The basic problem is then to select an optimal measurement policy, during a specified observation time interval, so that a weighted combination of prediction accuracy and accumulated observation cost is optimized. The current analysis is limited to the class of linear stochastic dynamic systems and measurement subsystems. The problem of selecting the optimal measurement strategy can be transformed into a deterministic optimal control problem. It is shown that the optimal measurement policy and the associated matched Kalman-type filter can be precomputed.
Athans, M.↗
Some results on the L sub p-stability of linear time-varying systems.
Stability of linear systems with convolution operator in forward loop and time-varying gain in feedback loop analyzed for frequency- and time- domain conditions
Willems, J. C.↗
A REPORT ON THREE SERIES OF EXPERIMENTS AND THE DESCRIPTION OF A SIMPLIFIED MODEL OF THE THIN WALL CYLINDER AND CONE BUCKLING MECHANISM
Three series of experiments were performed to investigate the nature of the buckling phenomenon. They were: a) influence of an increasing dimple on the buckling load of a cylinder; b) investigation of the strain distribution on one cylinder, after one or more waves were imposed on it; c) measurements of lateral deflections at buckling. The results of such experiments give some support to the idea of a buckling model, which can be of eventual interest to the thin wall cylinder and cone buckling problem, where a non-linear system (the buckled band) is considered in series with a linear system (the unbuckled portion of the cylinder, plus the testing-machine )
CYLINDER↗
Robust control design for aerospace applications
Time-domain control design for stability robustness of linear systems with structured uncertainty is addressed. Upper bounds on the linear perturbation of an asymptotically stable linear system are obtained, making it possible to maintain stability by using the structural information of the uncertainty. A quantitative measure called the stability robustness index is introduced and used to design controllers for robust stability. The proposed state feedback control design algorithm can be used, for a given set of perturbations, to select the range of control effort for which the system is stability-robust. Conversely it can be used, for a given control effort, to determine the size of the tolerable perturbation. The algorithm is illustrated with examples from aircraft control and large-space-structure control problems.
Yedavalli, Rama K.↗
Linear approximations of nonlinear systems
The development of a method for designing an automatic flight controller for short and vertical take off aircraft is discussed. This technique involves transformations of nonlinear systems to controllable linear systems and takes into account the nonlinearities of the aircraft. In general, the transformations cannot always be given in closed form. Using partial differential equations, an approximate linear system called the modified tangent model was introduced. A linear transformation of this tangent model to Brunovsky canonical form can be constructed, and from this the linear part (about a state space point x sub 0) of an exact transformation for the nonlinear system can be found. It is shown that a canonical expansion in Lie brackets about the point x sub 0 yields the same modified tangent model.
Hunt, L. R.↗
Linear approximations of nonlinear systems
A method for designing an automatic flight controller for short and vertical takeoff aircraft is presently being developed at NASA Ames Research Center. This technique involves transformations of nonlinear systems to controllable linear systems and takes into account the nonlinearities of the aircraft. In general, the transformations cannot always be given in closed form. Using partial differential equations, an approximate linear system, called the modified tangent model, was recently introduced. A linear transformation of this tangent model to Brunovsky canonical form can be constructed, and from this an approximation of an exact transformation for the nonlinear system can be found. It is shown that a canonical expansion in Lie brackets about the point x(0) yields the same modified tangent model.
Hunt, L. R.↗
On the controllability of a class of discrete bilinear systems.
The subject of this paper is the controllability of a class of time invariant discrete bilinear systems. Bilinear systems are classified into two categories: homogeneous and inhomogeneous. Necessity as well as the sufficiency results are obtained by means of decomposing the bilinear system into a linear system and a multiplicative feedback. By-products of the decomposition are the notions of multiplicative feedback compensation and the multiplicative feedback with bias compensation which may prove to be alternatives for the classical linear feedback compensation.
Goka, T.↗