Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “limits”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

A brightness exceeding simulated Langmuir limit

When an excitation of the first lens determines a beam is parallel beam, a brightness that is 100 times higher than Langmuir limit is measured experimentally, where Langmuir limits are estimated using a simulated axial cathode current density which is simulated based on a measured emission current. The measured brightness is comparable to Langmuir limit, when the lens excitation is such that an image position is slightly shorter than a lens position. Previously measured values of brightness for cathode apical radii of curvature 20, 60, 120, 240, and 480 μm were 8.7, 5.3, 3.3, 2.4, and 3.9 times higher than their corresponding Langmuir limits, respectively, in this experiment, the lens excitation was such that the lens and the image positions were 180 mm and 400 mm, respectively. From these measured brightness for three different lens excitation conditions, it is concluded that the brightness depends on the first lens excitation. For the electron gun operated in a space charge limited condition, some of the electrons emitted from the cathode are returned to the cathode without having crossed a virtual cathode. Therefore, method that assumes a Langmuir limit defining method using a Maxwellian distribution of electron velocities may need to be revised. For the condition in which the values of the exceeding the Langmuir limit are measured, the simulated trajectories of electrons that are emitted from the cathode do not cross the optical axis at the crossover, thus the law of sines may not be valid for high brightness electron beam systems.

43 PARTICLE ACCELERATORS↗

Can quantum transition state theory be defined as an exact t = 0 + limit?

Here, the definition of the classical transition state theory (TST) as a t → 0 + limit of the flux-side time correlation function relies on the assumption that simultaneous measurement of population and flux is a well defined physical process. However, the noncommutativity of the two measurements in quantum mechanics makes the extension of such a concept to the quantum regime impossible. For this reason, quantum TST (QTST) has been generally accepted as any kind of quantum rate theory reproducing the TST in the classical limit, and there has been a broad consensus that no unique QTST retaining all the properties of TST can be defined. Contrary to this widely held view, Hele and Althorpe (HA) recently suggested that a true QTST can be defined as the exact t → 0 + limit of a certain kind of quantum flux-side time correlation function and that it is equivalent to the ring polymer molecular dynamics (RPMD) TST. This work seeks to question and clarify certain assumptions underlying these suggestions and their implications. First, the time correlation function used by HA as a starting expression is not related to the kinetic rate constant by virtue of linear response theory, which is the first important step in relating a t = 0 + limit to a physically measurable rate. Second, a theoretical analysis calls into question a key step in HA’s proof which appears not to rely on an exact quantum mechanical identity. The correction of this makes the true t = 0 + limit of HA’s QTST different from the RPMD-TST rate expression, but rather equal to the well-known path integral quantum transition state theory rate expression for the case of centroid dividing surface. An alternative quantum rate expression is then formulated starting from the linear response theory and by applying a recently developed formalism of real time dynamics of imaginary time path integrals. In conclusion, it is shown that the t → 0 + limit of the new rate expression vanishes in the exact quantum limit.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Limiting current in a collisional crossed-field gap

Crossed-field devices are often used in pulsed power and high-power microwave applications. Previous studies derived closed-form solutions for the limiting current of a vacuum crossed-field system, corresponding to the maximum permissible current for laminar flow, below and above the Hull cutoff B H for magnetic insulation. We extend these studies by introducing collision frequency into the electron force law as a friction term to derive the limiting current in a collisional crossed-field gap. The resulting solution recovers the vacuum crossed-field case in the limit of no collisions and the collisional space-charge limited current with general initial velocity for magnetic field B → 0. In the limit of infinite collisions, we obtain a crossed-field equivalent to the Mott–Gurney law for the maximum current permissible in a collisional, nonmagnetic diode. When the collision frequency ν is less than the electron cyclotron frequency Ω, increasing initial velocity makes the critical current nonmonotonic with increasing ν with the critical current higher at B = B H for ν = Ω. As for a misaligned crossed-field gap where a component of the magnetic field was introduced parallel to the electric field across the gap, magnetic insulation is eliminated and the discontinuity at B = B H for limiting current observed in a vacuum crossed-field gap vanishes. As B → ∞, the limiting current approaches a constant that depends on the initial velocity and the collision frequency.

Breen, Lorin I.↗

SOME PROPERTIES OF ACTIVE GALACTIC NUCLEI IN THE VOLUME-LIMITED MAIN GALAXY SAMPLES OF SDSS DR8

Using two volume-limited Main galaxy samples of the Sloan Digital Sky Survey Data Release 8 above and below the value of M*{sub r}, we have explored some properties of AGNs. In the luminous volume-limited sample, 9.5% is composite galaxies (C) and 5.0% AGNs, while in the faint volume-limited sample, these fractions are 7.2% and 2.9%, respectively. The C and AGN fractions increase with luminosity. We also note that the fraction of star-forming galaxies decreases with luminosity, but the fraction of low signal-to-noise star-forming galaxies slightly increases with luminosity. In two volume-limited samples, the fraction of star-forming galaxies decreases with density, while the AGN fraction is nearly insensitive to the local environment. If composite galaxies (C) are classified as AGNs, then the fraction of AGNs in the luminous volume-limited sample declines with increasing local density. When focusing on some properties of AGN host galaxies, we find that galaxies hosting AGNs are preferentially more massive and have high concentration indices. In the faint volume-limited sample, AGN host galaxies preferentially have low star formation rates (SFRs) and specific SFRs (SSFRs). However, in the luminous volume-limited sample, AGN host galaxies preferentially have moderate SFRs and SSFRs.

79 ASTRONOMY AND ASTROPHYSICS↗

Limits on gamma-ray burst prompt radio emission using the LWA1

As a backend to the first station of the Long Wavelength Array (LWA1), the Prototype All Sky Imager has been imaging the sky > –26° declination during 34 gamma-ray bursts (GRBs) between 2012 January and 2013 May. Using this data, we were able to put the most stringent limits to date on prompt low-frequency emission from GRBs. While our limits depend on the zenith angle of the observed GRB, we estimate a 1σ rms sensitivity of 68, 65, and 70 Jy for 5 s integrations at 37.9, 52.0, and 74.0 MHz at zenith. These limits are relevant for pulses ≥5 s and are limited by dispersion smearing. For 5 s pulses, we are limited to dispersion measures (DMs) ≤ 220, 570, and 1600 pc cm{sup –3} for the frequencies above. For pulses lasting longer than 5 s, the DM limits increase linearly with the duration of the pulse. We also report two interesting transients, which are, as of yet, of unknown origin and are not coincident with any known GRBs. For general transients, we give rate density limits of ≤7.5 × 10{sup –3}, 2.9 × 10{sup –2}, and 1.4 × 10{sup –2} yr{sup –1} deg{sup –2} with pulse energy densities >1.3 × 10{sup –22}, 1.1 × 10{sup –22}, and 1.4 × 10{sup –22} J m{sup –2} Hz{sup –1} and pulse widths of 5 s at the frequencies given above.

79 ASTRONOMY AND ASTROPHYSICS↗

ALMA observations of the host galaxy of GRB 090423 at z = 8.23: deep limits on obscured star formation 630 million years after the big bang

We present rest-frame far-infrared (FIR) and optical observations of the host galaxy of GRB 090423 at z = 8.23 from the Atacama Large Millimeter Array (ALMA) and the Spitzer Space Telescope, respectively. The host remains undetected to 3σ limits of F {sub ν}(222 GHz) ≲ 33 μJy and F {sub ν}(3.6 μm) ≲ 81 nJy. The FIR limit is about 20 times fainter than the luminosity of the local ULIRG Arp 220 and comparable to the local starburst M 82. Comparing this with model spectral energy distributions, we place a limit on the infrared (IR) luminosity of L {sub IR}(8-1000 μm) ≲ 3 × 10{sup 10} L {sub ☉}, corresponding to a limit on the obscured star formation rate of SFR{sub IR}≲5 M {sub ☉} yr{sup –1}. For comparison, the limit on the unobscured star formation rate from Hubble Space Telescope rest-frame ultraviolet (UV) observations is SFR{sub UV} ≲ 1 M {sub ☉} yr{sup –1}. We also place a limit on the host galaxy stellar mass of M {sub *} ≲ 5 × 10{sup 7} M {sub ☉} (for a stellar population age of 100 Myr and constant star formation rate). Finally, we compare our millimeter observations to those of field galaxies at z ≳ 4 (Lyman break galaxies, Lyα emitters, and submillimeter galaxies) and find that our limit on the FIR luminosity is the most constraining to date, although the field galaxies have much larger rest-frame UV/optical luminosities than the host of GRB 090423 by virtue of their selection techniques. We conclude that GRB host galaxies at z ≳ 4, especially those with measured interstellar medium metallicities from afterglow spectroscopy, are an attractive sample for future ALMA studies of high redshift obscured star formation.

79 ASTRONOMY AND ASTROPHYSICS↗

The time course of acclimation to the stress of triose phosphate use limitation

Abstract Triose phosphate utilisation (TPU) limits the maximum rate at which plants can photosynthesise. However, TPU is almost never found to be limiting photosynthesis under ambient conditions for plants. This, along with previous results showing adaptability of TPU at low temperature, suggest that TPU capacity is regulated to be just above the photosynthetic rate achievable under the prevailing conditions. A set of experiments were performed to study the adaptability of TPU capacity when plants are acclimated to elevated CO 2 concentrations. Plants held at 1500 ppm CO 2 were initially TPU limited. After 30 h they no longer exhibited TPU limitations but they did not elevate their TPU capacity. Instead, the maximum rates of carboxylation and electron transport declined. A timecourse of regulatory responses was established. A step increase of CO 2 first caused PSI to be oxidised but after 40 s both PSI and PSII had excess electrons as a result of acceptor‐side limitations. Electron flow to PSI slowed and the proton motive force increased. Eventually, non‐photochemical quenching reduced electron flow sufficiently to balance the TPU limitation. Over several minutes rubisco deactivated contributing to regulation of metabolism to overcome the TPU limitation.

59 BASIC BIOLOGICAL SCIENCES↗

Proton beam power limits for stationary water-cooled tungsten target with different cladding materials

The proton beam power limit for a solid-tungsten spallation target is largely determined by beam induced thermomechanical structural loads and decay heat power deposition, while its lifetime is limited by radiation damage and fatigue life of the target materials. In this paper, we studied the power limits of a stationary water-cooled solid tungsten target concept. Tantalum clad tungsten was considered as a reference case. Being a low activation material, zircaloy 2 cladding option was studied and its decay heat driven power limit was compared with the reference case. Zirconium alloys have proven operations records in spallation target and nuclear fission environments, supported by materials data obtained from post irradiation examinations. Recent study also demonstrated feasibility of diffusion bonding zirconium to tungsten using vanadium foil inter layer. Particle transport simulations code FLUKA was used to calculate energy deposition and decay heat power deposition in the target, based on the beam parameters technically feasible at the Second Target Station of the Spallation Neutron Source at Oak Ridge National Laboratory. The energy deposition data were used for flow, thermal, and structural analyses to determine the beam intensity limit on the target concept studied. The decay heat deposition data were used to calculate the transient temperature evolution in the tungsten volumes in a loss of coolant accident (LOCA) scenario to determine its beam power limit. For a 1.3 GeV proton beam, the power limit on a stationary target was 400 kW for a tantalum clad target model and 800 kW for a zircaloy 2 clad target model.

Lee, Yong Joong↗

Dynamical crossover between the infinite-volume and empty-lattice limits of ultra-cold fermions in 1D optical lattices

Unlike typical condensed-matter systems, ultra-cold atoms loaded into optical lattices allow separate control of both the particle number and system size. As a consequence, there are two distinct "thermodynamic” limits that can be defined for these systems: i) ’’infinite-volume limit” at constant finite density, and ii) "empty-lattice limit” at constant particle number. To probe the difference between these two limits and their crossover, we consider a partially occupied lattice and study the transport into the unoccupied region of non-interacting fermions and fermions interacting at the mean-field level. In the infinite-volume limit, a finite steady-state current emerges. On the other hand, in the empty-lattice limit there is no finite steady-state current. By changing the initial filling, we find a smooth crossover between the two limits. Our predictions may be verified using available experimental tools and demonstrate a fundamental difference between isolated small systems such as ultra-cold atoms and conventional condensed-matter systems.

74 ATOMIC AND MOLECULAR PHYSICS↗

Definition of Small Gram Quantity Contents for Type B Radioactive Material Transportation Packages: Activity-Based Content Limitations

Since the 1960's, the Department of Transportation Specification (DOT Spec) 6M packages have been used extensively for transportation of Type B quantities of radioactive materials between Department of Energy (DOE) facilities, laboratories, and productions sites. However, due to the advancement of packaging technology, the aging of the 6M packages, and variability in the quality of the packages, the DOT implemented a phased elimination of the 6M specification packages (and other DOT Spec packages) in favor of packages certified to meet federal performance requirements. DOT issued the final rule in the Federal Register on October 1, 2004 requiring that use of the DOT Specification 6M be discontinued as of October 1, 2008. A main driver for the change was the fact that the 6M specification packagings were not supported by a Safety Analysis Report for Packaging (SARP) that was compliant with Title 10 of the Code of Federal Regulations part 71 (10 CFR 71). Therefore, materials that would have historically been shipped in 6M packages are being identified as contents in Type B (and sometimes Type A fissile) package applications and addenda that are to be certified under the requirements of 10 CFR 71. The requirements in 10 CFR 71 include that the Safety Analysis Report for Packaging (SARP) must identify the maximum radioactivity of radioactive constituents and maximum quantities of fissile constituents (10 CFR 71.33(b)(1) and 10 CFR 71.33(b)(2)), and that the application (i.e., SARP submittal or SARP addendum) demonstrates that the external dose rate (due to the maximum radioactivity of radioactive constituents and maximum quantities of fissile constituents) on the surface of the packaging (i.e., package and contents) not exceed 200 mrem/hr (10 CFR 71.35(a), 10 CFR 71.47(a)). It has been proposed that a 'Small Gram Quantity' of radioactive material be defined, such that, when loaded in a transportation package, the dose rates at external points of an unshielded packaging not exceed the regulatory limits prescribed by 10 CFR 71 for non-exclusive shipments. The mass of each radioisotope presented in this paper is limited by the radiation dose rate on the external surface of the package, which per the regulatory limit should not exceed 200 mrem/hr. The results presented are a compendium of allowable masses of a variety of different isotopes (with varying impurity levels of beryllium in some of the actinide isotopes) that, when loaded in an unshielded packaging, do not result in an external dose rate on the surface of the package that exceeds 190 mrem/hr (190 mrem/hr was chosen to provide 5% conservatism relative to the regulatory limit). These mass limits define the term 'Small Gram Quantity' (SGQ) contents in the context of radioactive material transportation packages. The term SGQ is isotope-specific and pertains to contents in radioactive material transportation packages that do not require shielding and still satisfy the external dose rate requirements. Since these calculated mass limits are for contents without shielding, they are conservative for packaging materials that provide some limited shielding or if the contents are placed into a shielded package. The isotopes presented in this paper were chosen as the isotopes that Department of Energy (DOE) sites most likely need to ship. Other more rarely shipped isotopes, along with industrial and medical isotopes, are planned to be included in subsequent extensions of this work.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Upper Limits on Gravitational Waves from Scorpius X-1 from a Model-based Cross-correlation Search in Advanced LIGO Data

We present the results of a semicoherent search for continuous gravitational waves from the low-mass X-ray binary Scorpius X-1, using data from the first Advanced LIGO observing run. The search method uses details of the modeled, parametrized continuous signal to combine coherently data separated by less than a specified coherence time, which can be adjusted to trade off sensitivity against computational cost. A search was conducted over the frequency range 25–2000 Hz, spanning the current observationally constrained range of binary orbital parameters. No significant detection candidates were found, and frequency-dependent upper limits were set using a combination of sensitivity estimates and simulated signal injections. The most stringent upper limit was set at 175 Hz, with comparable limits set across the most sensitive frequency range from 100 to 200 Hz. At this frequency, the 95% upper limit on the signal amplitude h {sub 0} is 2.3×10{sup −25} marginalized over the unknown inclination angle of the neutron star’s spin, and 8.0×10{sup −26} assuming the best orientation (which results in circularly polarized gravitational waves). These limits are a factor of 3–4 stronger than those set by other analyses of the same data, and a factor of ∼7 stronger than the best upper limits set using data from Initial LIGO science runs. In the vicinity of 100 Hz, the limits are a factor of between 1.2 and 3.5 above the predictions of the torque balance model, depending on the inclination angle; if the most likely inclination angle of 44° is assumed, they are within a factor of 1.7.

79 ASTRONOMY AND ASTROPHYSICS↗

The effects of bandpass limiters on n-phase tracking systems

The combination of a bandpass limiter and an n-th power tracking loop is considered. Performance of the combination does not depend on the form of the nonlinear function used to create the n-th harmonic signal as long as some energy in that zone is produced. The order in which the limiter and n-th power nonlinearity occur is unimportant so that the results apply equally well to the n-phase Costas type of implementations of the n-th power loops. Closed form expressions for the signal suppression factors are obtained. Coherent and noncoherent SNR's out of the n-th power-limiter combination can be expressed in terms of two of these suppression factors. The loop SNR of an n-th power-limited phase locked loop is estimated by simply calculating the suppression factors for n-th and 2n-th power loops. Finally, n-th power phase locked loops without limiters are compared with similar loops with limiters; the limiter can actually enhance output SNR at moderate to large input SNR.

Butman, S. A.↗

The effects of bandpass limiters on n-phase tracking systems

The combination of a bandpass limiter and an n(th) power tracking loop is considered. It is shown that the performance of the combination does not depend on the form of the nonlinear function used to create the n(th) harmonic signal so long as some energy in that zone is produced. Furthermore, the order in which the limiter and n(th) power nonlinearity occur is unimportant so that the results apply equally well to the n-phase Costas type of implementation of the n(th) power loops. Closed form expressions for the signal suppression factors are obtained and it is shown that the coherent and noncoherent SNR's out of the n(th) power-limiter combination can be expressed in terms of two of these suppression factors. This later point enables one to estimate the loop SNR of an n(th) power-limiter phase locked loop by simply calculating the suppression factors for n(th) and 2n(th) power loops. Finally, n(th) power phase locked loops without limiters are compared with similar loops with limiters where it is shown that the presence of the limiter can actually enhance the output SNR at moderate to large values of input SNR.

Butman, S. A.↗

High resolution TVD schemes using flux limiters

Roe (1981, 1985) has utilized flux limiters to obtain second order monotonicity preserving schemes. In the present paper, the foundation for flux limiters in the formulation of first order three-point schemes are discussed, and a systematic outline is provided of the method of using flux limiters to obtain second order accurate TVD schemes. Attention is given to Phi limiters, the Van Leer limiter, the Chakravarthy-Osher limiter, the linear advection equation and square wave data, the inviscid Burger's equation, and the extension of flux limiters to irregular grids, systems of equations, and implicit calculations.

Sweby, P. K.↗

Optical limiting in solutions of metallo-phthalocyanines and naphthalocyanines

Optical limiting measurements have been made on solutions of several metal containing phthalocyanines and naphthalocyanines. Measurements at 532nm using nanosecond pulses from a Q-switched Nd:YAG laser show limiting throughputs of 1-10 millijoules with mild focussing in alcohol solutions with nominal transmissions of 30-70 percent. Measurements on chloro-aluminum-phthalocyanine solutions utilizing individual 30 psec pulses or trains (spanning about 100nsec) of modelocked pulses have shown even lower limiting throughputs. Thus, the dynamic range of the limiting behavior has been shown to cover at least three orders of magnitude. Prompt limiting is attributed to strong singlet-singlet (S1-Sn) absorption, whereas the longer time limiting behavior is postulated to result from strong triplet-triplet (T1-Tn) absorption. In addition to these studies, efforts have been underway to identify materials with reduced limiting throughput and improved optical transmission characteristics.

Coulter, Daniel R.↗

Fracture mechanics validity limits

Fracture behavior is characteristics of a dramatic loss of strength compared to elastic deformation behavior. Fracture parameters have been developed and exhibit a range within which each is valid for predicting growth. Each is limited by the assumptions made in its development: all are defined within a specific context. For example, the stress intensity parameters, K, and the crack driving force, G, are derived using an assumption of linear elasticity. To use K or G, the zone of plasticity must be small as compared to the physical dimensions of the object being loaded. This insures an elastic response, and in this context, K and G will work well. Rice's J-integral has been used beyond the limits imposed on K and G. J requires an assumption of nonlinear elasticity, which is not characteristic of real material behavior, but is thought to be a reasonable approximation if unloading is kept to a minimum. As well, the constraint cannot change dramatically (typically, the crack extension is limited to ten-percent of the initial remaining ligament length). Rice, et al investigated the properties required of J-type parameters, J(sub x), and showed that the time rate, dJ(sub x)/dt, must not be a function of the crack extension rate, da/dt. Ernst devised the modified-J parameter, J(sub M), that meets this criterion. J(sub M) correlates fracture data to much higher crack growth than does J. Ultimately, a limit of the validity of J(sub M) is anticipated, and this has been estimated to be at a crack extension of about 40-percent of the initial remaining ligament length. None of the various parameters can be expected to describe fracture in an environment of gross plasticity, in which case the process is better described by deformation parameters, e.g., stress and strain. In the current study, various schemes to identify the onset of the plasticity-dominated behavior, i.e., the end of fracture mechanics validity, are presented. Each validity limit parameter is developed in detail, and then data is presented and the various schemes for establishing a limit of the validity are compared. The selected limiting parameter is applied to a set of fracture data showing the improvement of correlation gained.

Lambert, Dennis M.↗

Analysis of Slope Limiters on Irregular Grids

This paper examines the behavior of flux and slope limiters on non-uniform grids in multiple dimensions. Many slope limiters in standard use do not preserve linear solutions on irregular grids impacting both accuracy and convergence. We rewrite some well-known limiters to highlight their underlying symmetry, and use this form to examine the proper - ties of both traditional and novel limiter formulations on non-uniform meshes. A consistent method of handling stretched meshes is developed which is both linearity preserving for arbitrary mesh stretchings and reduces to common limiters on uniform meshes. In multiple dimensions we analyze the monotonicity region of the gradient vector and show that the multidimensional limiting problem may be cast as the solution of a linear programming problem. For some special cases we present a new directional limiting formulation that preserves linear solutions in multiple dimensions on irregular grids. Computational results using model problems and complex three-dimensional examples are presented, demonstrating accuracy, monotonicity and robustness.

Berger, Marsha↗

An Experimental Study of n-Heptane and JP-7 Extinction Limits in an Opposed Jet Burner

Propulsion engine combustor design and analysis requires experimentally verified data on the chemical kinetics of fuel. Among the important data is the combustion extinction limit as measured by observed maximum flame strain rate. The extinction limit relates to the ability to maintain a flame in a combustor during operation. Extinction limit data can be obtained for a given fuel by means of a laminar flame experiment using an opposed jet burner (OJB). Laminar extinction limit data can be applied to the turbulent application of a combustor via laminar flamelet modeling. The OJB consists of two axi-symmetric tubes (one for fuel and one for oxidizer), which produce a flat, disk-like counter-flow diffusion flame. This paper presents results of experiments to measure extinction limits for n-heptane and the military specification fuel JP-7, obtained from an OJB. JP-7 is an Air Force-developed fuel that continues to be important in the area of hypersonics. Because of its distinct properties it is currently the hydrocarbon fuel of choice for use in Scramjet engines. This study provides much-desired data for JP-7, for which very little information previously existed. The interest in n-heptane is twofold. First, there has been a significant amount of previous extinction limit study and resulting data with this fuel. Second, n-heptane (C7H16) is a pure substance, and therefore does not vary in composition as does JP-7, which is a mixture of several different hydrocarbons. These two facts allow for a baseline to be established by comparing the new OJB results to those previously taken. Additionally, the data set for n-heptane, which previously existed for mixtures up to 26 mole percent in nitrogen, is completed up to 100% n-heptane. The extinction limit data for the two fuels are compared, and complete experimental results are included.

Convery, Janet L.↗