SEARCH · Engineering Papers

Results for “lab data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

All sources NASA NTRS DOE OSTI

NASA NTRS2019

Flight Test Methodology for NASA Advanced Inlet Liner on 737MAX-7 Test Bed (Quiet Technology Demonstrator 3)

This paper describes the acoustic flight test results of an advanced nacelle inlet acoustic liner concept designed by NASA Langley, in a campaign called Quiet Technology Demonstrator 3 (QTD3). NASA has been developing multiple acoustic liner concepts to benefit acoustics with multiple-degrees of freedom (MDOF) honeycomb cavities, and lower the excrescence drag. Acoustic and drag performance were assessed at a lab-scale, flow duct level in 2016. Limitations of the lab-scale rig left open-ended questions regarding the in-flight acoustic performance. This led to a joint project to acquire acoustic flyover data with this new liner technology built into full scale inlet hardware containing the NASA MDOF Low Drag Liner. Boeing saw an opportunity to collect the acoustic flyover data on the 737 MAX-7 between certification tests at no impact to the overall program schedule, and successfully executed within the allotted time. The flight test methodology and the test configurations are detailed and the acoustic analysis is summarized in this paper. After the tone and broadband deltas associated with the inlet hardware were separated and evaluated, the result was a significant decrease in cumulative EPNL (Effective Perceived Noise Level).

Wong, Jackie W.↗

NASA NTRS1994

Simplifying Operations with an Uplink/Downlink Integration Toolkit

The Operations Engineering Lab (OEL) at JPL has developed a simple, generic toolkit to integrate the uplink/downlink processes (often called closing the loop) in JPL's Multimission Ground Data System. This toolkit provides capabilities for integrating telemetry verification points with predicted spacecraft commands and ground events in the Mission Sequence of Events (SOE) document. This toolkit is designed to greatly simplify the user's ability to access and view telemetry data, and also provide a means to view this data in a context of the commands and ground events that are used to interpret it. This paper will discuss the toolkit implementation, including design trade-offs and future for enhancing the automated capabilities.

ground↗

NASA NTRS2019

SPEX Airborne Spectropolarimeter Calibration and Performance

To improve our understanding of the complex role of aerosols in the climate system and on air quality, measurements are needed of optical and microphysical aerosol. From many studies, it has become evident that a satellite-based multiangle, multiwavelength polarimeter will be essential to provide such measurements. Here, high accuracy (∼0.003) on the degree of linear polarization (DoLP) measurements is important to retrieve aerosol properties with an accuracy needed to advance our understanding of the aerosol effect on climate. SPEX airborne, a multiangle hyperspectral polarimeter, has been developed for observing and characterizing aerosols from NASA’s high-altitude research aircraft ER-2. It delivers measurements of radiance and DoLP at visual wavelengths with a spectral resolution of 3 and 7–30 nm, respectively, for radiance and polarization, at nine fixed equidistant viewing angles from −56° to +56° oriented along the ground track, and a swath of 7° oriented across-track. SPEX airborne uses spectral polarization modulation to determine the state of linear polarization of scattered sunlight. This technique has been developed in the Netherlands and has been demonstrated with ground-based instruments. SPEX airborne serves as a demonstrator for a family of space-based SPEX instruments that have the ability to measure and characterize atmospheric aerosol by multiangle hyperspectral polarimetric imaging remotely from a satellite platform. SPEX airborne was calibrated radiometrically and polarimetrically using Jet Propulsion Laboratory (JPL) facilities including the Polarization Stage Generator-2 (PSG-2), which is designed for polarimetric calibration and validation of the Airborne Multiangle SpectroPolarimetric Imager (AirMSPI). Using the PSG-2, the accuracy of the SPEX airborne DoLP measurements in the laboratory setup is found to be 0.002–0.004. Radiometric calibration is realized with an estimated accuracy of 4%. In 2017, SPEX airborne took part in the “Aerosol Characterization from Polarimeters and Lidar” campaign on the ER-2 that included four polarimeters and two lidars. Polarization measurements of SPEX airborne and the coflying Research Scanning Polarimeter (RSP), recorded during the campaign, were compared and display root-mean-square (RMS) differences ranging from 0.004 (at 555 nm) up to 0.02 (at 410 nm). For radiance measurements, excellent agreement between SPEX airborne and RSP is obtained with an RMS difference of ∼4%. The lab- and flight-performance values for polarization are similar to those recently published for AirMSPI, where also an intercomparison with RSP was made using data from field campaigns in 2013. The intercomparison of radiometric and polarimetric data both display negligible bias. The in-flight comparison results provide verification of SPEX airborne’s capability to deliver high-quality data.

Aerosols↗

NASA NTRSDate not supplied

Wireless Sensor Instrumentation for Distributed Sensing in Ground-Test Facilities

Wireless sensors have a number of advantages over wired sensors for flexible or temporary diagnostic deployment in a field or lab setting. Relative to wireless alternatives, traditional wired systems encounter limitations including spatial and weight constraints, maintenance costs, and signal integrity in high-noise environments. Ground-test facilities often face these challenges and cause increase down-time costs and failure of data integrity. This paper describes the development and implementation of flexible wireless sensor boards for applications within ground-test facilities using different network architectures. These boards implement state-of-the- art STM32 microprocessor chips for high-speed data acquisition and computational power. Additionally, the design integrates long-range radio transceivers with power output of +20dBm, easily reaching 2 km range, while maintaining high interference immunity and minimizing current consumption. The wireless sensor boards were implemented to demonstrate performance through benchmark testing and by taking distributed electrically-isolated measurements on a high-voltage lab apparatus while using different network architectures. Although this test case is in a laboratory setting, this network architecture could be easily repurposed for various other forms of monitoring.

Wireless Sensor Network↗

NASA NTRS1991

Analysis of materials from MSFC LDEF experiments

In preparation for the arrival of the Long Duration Exposure Facility (LDEF) samples, a material testing and handling approach was developed for the evaluation of the materials. A configured lab was made ready for the de-integration of the LDEF experiments. The lab was prepared to clean room specifications and arranged with the appropriate clean benches, tables, lab benches, clean room tools, particulate counter, and calibrated and characterized analytical instrumentation. Clean room procedures were followed. Clean room attire and shoe cleaning equipment were selected and installed for those entering. Upon arrival of the shipping crates they were taken to the lab, logged in, and opened for examination. The sample trays were then opened for inspection and test measurements. The control sample measurements were made prior to placement into handling and transport containers for the flight sample measurements and analysis. Both LDEF flight samples and LDEF type materials were analyzed and tested for future flight candidate material evaluation. Both existing and newly purchased equipment was used for the testing and evaluation. Existing Space Simulation Systems had to be upgraded to incorporate revised test objectives and approaches. Fixtures such as special configured sample holders, water, power and LN2 feed-throughs, temperature measurement and control, front surface mirrors for reflectance and deposition, and UV grade windows had to be designed, fabricated, and installed into systems to achieve the revised requirements. New equipment purchased for LDEF analysis was incorporated into and/or used with existing components and systems. A partial list of this equipment includes a portable monochromator, enhanced UV System, portable helium leak detector for porosity and leak measurements, new turbo pumping system, vacuum coaster assembly, cryopumps, and analytical and data acquisition equipment. A list of materials tested, equipment designed, fabricated and installed, systems used, and analytical research accomplished on both LDEF flight samples and on similar materials which were lab tested for a comparative analysis to the LDEF flight samples is presented.

Johnson, R. Barry↗

NASA NTRS2001

Assessment of Stirling Technology Has Provided Critical Data Leading Toward Flight Readiness of the Stirling Converter

The NASA Glenn Research Center is supporting the development of a Stirling converter with the Department of Energy (DOE, Germantown, Maryland) for an advanced Stirling Radioisotope Power System (SRPS) to provide spacecraft onboard electric power for NASA space science missions. A key technology assessment completed by Glenn and DOE has led to the SRPS being identified as a high-efficiency power source for such deep space missions as the Europa Orbiter and the Solar Probe. In addition, the Stirling system is now being considered for unmanned Mars rovers, especially where mission profiles may exclude the use of photovoltaic power systems, such as exploration at high Martian latitudes or for missions of long duration. The SRPS efficiency of over 20 percent will reduce the required amount of radioisotope by more than a factor of 3 in comparison to current radioisotope thermoelectric generators. This significantly reduces radioisotope cost, radiological inventory, and system cost, and it provides efficient use of scarce radioisotope resources. In support of this technology assessment, Glenn conducted a series of independent evaluations and tests to determine the technology readiness of a 55-We Stirling converter developed by Stirling Technology Company (Kennewick, Washington) and DOE. Key areas evaluated by Glenn included: 1) Radiation tolerance of materials; 2) Random vibration testing of the Stirling converter in Glenn's Structural Dynamics Lab to simulate operation in the launch environment; 3) Electromagnetic interference and compatibility (EMI/EMC) of the converter operating in Glenn's EMI lab; Independent failure modes, effects, and criticality analysis, and life and reliability 4. Independent failure modes, effects, and criticality analysis, and life and reliability assessment; and 5) SRPS cost estimate. The data from these evaluations were presented to NASA Headquarters and the Jet Propulsion Laboratory mission office by a joint industry/Government team consisting of DOE, Glenn, and Lockheed Martin Astronautics. This team concluded that there are no technical reasons that would rule out using the Stirling converter for deep space missions. As a direct result of the successful testing at Glenn, the DOE/Stirling Technology Company 55-We Stirling converter has been baselined for the SRPS. Glenn is now continuing an in-house project to assist in developing the Stirling converter for readiness for space qualification and mission implementation. As part of this effort, the Stirling converter will be further characterized under launch environment random vibration testing, methods to reduce converter EMI will be developed, and an independent performance verification will be completed. Converter life assessment and permanent magnet aging characterization tasks are also underway. Substitute organic materials for the linear alternator and piston bearing coatings for use in a high-radiation environment have been identified and have now been incorporated in Stirling converters built by Stirling Technology Company for Glenn. Electromagnetic and thermal finite element analyses for the alternator are also being conducted.

Thieme, Lanny G.↗

NASA NTRS1994

Integration for navigation on the UMASS mobile perception lab

Integration of real-time visual procedures for use on the Mobile Perception Lab (MPL) was presented. The MPL is an autonomous vehicle designed for testing visually guided behavior. Two critical areas of focus in the system design were data storage/exchange and process control. The Intermediate Symbolic Representation (ISR3) supported data storage and exchange, and the MPL script monitor provided process control. Resource allocation, inter-process communication, and real-time control are difficult problems which must be solved in order to construct strong autonomous systems.

Draper, Bruce↗

NASA NTRS2000

Upper Eocene Spherules at ODP Site 1090B

Our two labs independently discovered upper Eocene microtektites and microkrystites at ODP Site 1090, a new South Atlantic locality near the Agulhus Ridge. This is a significant new data point for the strewn fields of these spherules, which were recently extended into the Atlantic sector of the Southern Ocean when they were reported at ODP Site 689 on the Maude Rise. The microtektites have been regarded as related to North American tektites and the microkrystites as belonging to the clinopyroxene-bearing (cpx) spherule strewn field. Initial reports indicate that Site 1090 contains a complete sequence of upper Eocene sediments composed of diatom and nannofossil oozes. The magneto- and bio-stratigraphy indicate that impact-age sediments should occur in core 30X of Hole 1090B. One of us (FTK) took 2 cc samples at 10 cm intervals over 600 cm of core for Ir analyses and the senior author (SL) took 3 cc samples at 20 cm intervals to search for spherules. Both studies proved successful and additional samples were obtained to confirm initial results and better define the Ir anomaly and spherule abundances. Peak Ir concentrations of 0.97 ng/g were found at 1090B-30X-5, 105-106cm and 0.78 ng/g at 115-116 cm. Anomalous Ir concentrations (greater than 0.1 ng/g) extend over about 100 cm of core. Preliminary results indicate that the excess Ir at this site is about 25 ng per sq cm. About 380 microtektites (>63 pm) and 2492 microkrystites (>63 pm) were recovered over a 1.8 m interval with a peak abundance of microtektites (106/gram) and microkrystites (562/gram) at 1090B-30X- 5, 114-115 cm. The largest microtektite is approximately 960 x 1140 micron in size. About 55 % are spherical, and the rest are disc, cylinder, dumbbell, teardrop, or fragments. Most of the microtektites are transparent colorless, but a few are transparent pale brown or green. Preliminary data indicate that the microtektites at Site 1090 have similar major oxide compositions to those at Site 689. About 50% of the cpx spherules are spherical, the rest are fragments. They range from yellowish translucent to dark opaque. Based on stratigraphic data, occurrence of a positive Ir anomaly, and similar appearance and major oxide compositions of the Site 1090 spherules to those at Site 689, we believe that the spherule layer(s) are the same at both sites. However, there are significant differences between these two sites. At Site 689 the peak abundance of the cpx spherules is slightly below that of the microtektites. We can distinguish no such separation at Site 1090, despite a somewhat higher sediment accumulation rates. Peak Ir concentrations are about four times higher at Site 1090, resulting in a similarly higher total flux of Ir for this site compared to Site 689 on the Maude Rise. This is generally consistent with the flux of cpx spherules (greater than 63 pm) which is estimated to be approximately -2100 per sq cm, about twice that of Site 689D (1040 sq cm) and with the cpx-spherule component being a principal carrier of the Ir signal. The number of microtektites per sq cm (greater than 63 micron) is nearly the same at both sites, approximately 300 in 1090B and 280 in 689B. A decrease in the greater than 63 micron size fraction (consisting primarily of diatoms and radiolaria) is coincident with the spherule layer at both sites suggesting that the impact(s) that produced the spherule layer(s) may have had an adverse affect on the marine plankton.

Liu, S.↗

NASA NTRS2008

Projectile and Lab Frame Differential Cross Sections for Electromagnetic Dissociation

Differential cross sections for electromagnetic dissociation in nuclear collisions are calculated for the first time. In order to be useful for three - dimensional transport codes, these cross sections have been calculated in both the projectile and lab frames. The formulas for these cross sections are such that they can be immediately used in space radiation transport codes. Only a limited amount of data exists, but the comparison between theory and experiment is good.

Norbury, John W.↗

NASA NTRSDate not supplied

Next Generation Exercise Device (NGED): Advancing Exercise Capabilities for Future Space Missions Through Biomechanical Modeling

BACKGROUND As space exploration extends to long-duration missions on the Moon and Mars, maintaining astronaut health and fitness becomes increasingly critical. The Next Generation Exercise Device (NGED), developed and tested by the HumanWorks Lab in NASA Johnson Space Center's (JSC) Software, Robotics, and Simulation Division, aims to address this challenge through innovative approaches. This study presents the development and evaluation of an NGED system, focusing on its adaptability to various mission scenarios, including prospective use in a Lunar Pressurized Rover (LPR). Central to this project is the application of biomechanical modeling to optimize exercise efficacy and safety in microgravity and partial gravity environments. The project is a collaborative effort with the Human Health and Performance group at Johnson Space Center, ensuring a comprehensive approach to astronaut well-being that integrates biomechanical principles with practical exercise solutions. The NGED represents the next generation of exercise capabilities for missions in space, on the Moon and Mars, with a specific focus on applications such as the LPR. METHODS AND RESULTS Data collection for NGED development was conducted with two motor-driven Beyond Power Voltra I [1] systems and a custom test structure to allow placement of the cable-based devices on the ground, at shoulder height, and overhead. The collection was performed in JSC’s Prototype Immersive Technology (PIT) Lab, utilizing an OptiTrack motion capture system and AMTI force platform, to enable detailed biomechanical analysis via OpenSim [2,3]. Motion capture data were collected for three subjects representing different body types and statures. The marker set used was an enhanced version of the full-body Plug-in Gait marker set [4], with additional markers strategically placed for the primary objective of informing exercise volume requirements. Subjects performed a series of 17 exercises, carefully selected to engage various muscle groups, including novel spaceflight exercises such as skiing (ergometer style), lateral pulldowns, wood chops, triceps extensions, and flies, with load variations ranging from 10 to 90 pounds to maintain kinematic form. This comprehensive approach allowed for a thorough evaluation of the NGED's performance across a wide range of motions and loads. The biomechanical modeling and analysis were conducted using a modified OpenSim Full Body Rajagopal Model [4,5] and also scaled to the maximum and minimum anthropometry provided in NASA-STD-3001 [6]. Volumetric convex hulls were generated based on model marker trajectories and aggregated into geometric assemblies. These can be placed in models of vehicle designs to assess fit to protect for exercise as well as to adapt NGED exercise to fit available space. Preliminary findings from the collection indicate that the NGED prototype demonstrates significant adaptability across varying user anthropometrics and exercise types. The device showed consistent performance in load-bearing exercises, with subjects able to perform exercises effectively while maintaining proper biomechanical form. CONCLUSION NGED represents a forward-looking advancement in exercise capabilities for future space missions. In the future, this system can be used to capture valuable metrics (e.g., isometric mid-thigh pull for force output measurements, assessments of postural muscle strength, overall isometric strength). Its versatility in accommodating various exercises and user physiques, coupled with the ability to provide targeted biomechanical loading, makes it a promising approach for maintaining astronaut health during long-duration missions to the Moon and Mars. Future work will focus on refining the NGED based on initial biomechanical findings, leveraging the detailed insights provided by motion capture and analysis techniques. Particular emphasis will be placed on optimizing its use within the confined spaces of a LPR and other space habitats. This work contributes significantly to NASA's goals of supporting human health and performance in deep space exploration, paving the way for sustainable long-term presence beyond Low Earth Orbit through advanced, biomechanically-informed exercise solutions.

C Wang↗

NASA NTRS1999

ACTS 118x: High Speed TCP Interoperability Testing

With the recent explosion of the Internet and the enormous business opportunities available to communication system providers, great interest has developed in improving the efficiency of data transfer over satellite links using the Transmission Control Protocol (TCP) of the Internet Protocol (IP) suite. The NASA's ACTS experiments program initiated a series of TCP experiments to demonstrate scalability of TCP/IP and determine to what extent the protocol can be optimized over a 622 Mbps satellite link. Through partnerships with the government technology oriented labs, computer, telecommunication, and satellite industries NASA Glenn was able to: (1) promote the development of interoperable, high-performance TCP/IP implementations across multiple computing / operating platforms; (2) work with the satellite industry to answer outstanding questions regarding the use of standard protocols (TCP/IP and ATM) for the delivery of advanced data services, and for use in spacecraft architectures; and (3) conduct a series of TCP/IP interoperability tests over OC12 ATM over a satellite network in a multi-vendor environment using ACTS. The experiments' various network configurations and the results are presented.

Brooks, David E.↗

NASA NTRS1985

Efficient implementation of real-time programs under the VAX/VMS operating system

Techniques for writing efficient real-time programs under the VAX/VMS oprating system are presented. Basic operations are presented for executing at real-time priority and for avoiding needlless processing delays. A highly efficient technique for accessing physical devices by mapping to the input/output space and accessing the device registrs directly is described. To illustrate the application of the technique, examples are included of different uses of the technique on three devices in the Langley Avionics Integration Research Lab (AIRLAB): the KW11-K dual programmable real-time clock, the Parallel Communications Link (PCL11-B) communication system, and the Datacom Synchronization Network. Timing data are included to demonstrate the performance improvements realized with these applications of the technique.

Johnson, S. C.↗

NASA NTRS1988

Publications of the Jet Propulsion Laboratory 1987

A bibliography is presented which describes and indexes by author the externally distributed technical reporting, released during the calender year 1987, that resulted from scientific and engineering work performed, or managed, by the Jet Propulsion Lab. Three classes of publications are included: (1) JPL publications in which the information is complete for a specific accomplishment; (2) Articles from the quarterly Telecommunications and Data Acquisition Progress Report; and (3) Articles published in the open literature.

Source record↗

NASA NTRS2011

HIFIRE Flight 2 Overview and Status Update 2011

A collaborative international effort, the Hypersonic International Flight Research Experimentation (HIFiRE) Program aims to study basic hypersonic phenomena through flight experimentation. HIFiRE Flight 2 teams the United States Air Force Research Lab (AFRL), NASA, and the Australian Defence Science and Technology Organisation (DSTO). Flight 2 will develop an alternative test technique for acquiring high enthalpy scramjet flight test data, allowing exploration of accelerating hydrocarbon-fueled scramjet performance and dual-to-scram mode transition up to and beyond Mach 8 flight. The generic scramjet flowpath is research quality and the test fuel is a simple surrogate for an endothermically cracked liquid hydrocarbon fuel. HIFiRE Flight 2 will be a first of its kind in contribution to scramjets. The HIFiRE program builds upon the HyShot and HYCAUSE programs and aims to leverage the low-cost flight test technique developed in those programs. It will explore suppressed trajectories of a sounding rocket propelled test article and their utility in studying ramjet-scramjet mode transition and flame extinction limits research. This paper describes the overall scramjet flight test experiment mission goals and objectives, flight test approach and strategy, ground test and analysis summary, development status and project schedule. A successful launch and operation will present to the scramjet community valuable flight test data in addition to a new tool, and vehicle, with which to explore high enthalpy scramjet technologies.

Jackson, Kevin R.↗

NASA NTRS2016

PLANT: Polarimetric-Interferometric Lab and Analysis Tools for Ecosystem and Land-Cover Science and Applications

PLANT (Polarimetric-interferometric Lab and Analysis Tools) is a new collection of software tools developed at the Jet Propulsion Laboratory to support processing and analysis of Synthetic Aperture Radar (SAR) data for ecosystem and land-cover/land-use change science and applications. PLANT inherits code components from the Interferometric Scientific Computing Environment (ISCE) to generate highresolution, coregistered polarimetric-interferometric SLC stacks from Level-0/1 data for a variety of airborne and spaceborne sensors. The goal is to provide the ecosystem and land-cover/land-use change communities with rigorous and efficient tools to perform multi-temporal, polarimetric and tomographic analyses in order to generate calibrated, geocoded and mosaicked Level-2 and Level-3 products (e.g.,maps of above-ground biomass and forest disturbance). In this paper we introduce the capabilities of PLANT and report first results obtained with the tools developed up to date.

Lavalle, Marco↗

NASA NTRSDate not supplied

Integrating Micro-Grid Wind into ODIN

This talk presents our work to integrate micro-grid wind forecasts into ODIN-fire, using Missoula Fire Labs WindNinja wind simulator and Delphire Sentinel fire sensors.

wildland-fire↗

NASA NTRS2003

Software for Testing Electroactive Structural Components

A computer program generates a graphical user interface that, in combination with its other features, facilitates the acquisition and preprocessing of experimental data on the strain response, hysteresis, and power consumption of a multilayer composite-material structural component containing one or more built-in sensor(s) and/or actuator(s) based on piezoelectric materials. This program runs in conjunction with Lab-VIEW software in a computer-controlled instrumentation system. For a test, a specimen is instrumented with appliedvoltage and current sensors and with strain gauges. Once the computational connection to the test setup has been made via the LabVIEW software, this program causes the test instrumentation to step through specified configurations. If the user is satisfied with the test results as displayed by the software, the user activates an icon on a front-panel display, causing the raw current, voltage, and strain data to be digitized and saved. The data are also put into a spreadsheet and can be plotted on a graph. Graphical displays are saved in an image file for future reference. The program also computes and displays the power and the phase angle between voltage and current.

Moses, Robert W.↗

NASA NTRS2017

A Dose of Reality: Radiation Analysis for Realistic Human Spacecraft

INTRODUCTION As with most computational analyses, a tradeoff exists between problem complexity, resource availability and response accuracy when modeling radiation transport from the source to a detector. The largest amount of analyst time for setting up an analysis is often spent ensuring that any simplifications made have minimal impact on the results. The vehicle shield geometry of interest is typically simplified from the original CAD design in order to reduce computation time, but this simplification requires the analyst to "re-draw" the geometry with a limited set of volumes in order to accommodate a specific radiation transport software package. The resulting low-fidelity geometry model cannot be shared with or compared to other radiation transport software packages, and the process can be error prone with increased model complexity. The work presented here demonstrates the use of the DAGMC (Direct Accelerated Geometry for Monte Carlo) Toolkit from the University of Wisconsin, to model the impacts of several space radiation sources on a CAD drawing of the US Lab module. METHODS The DAGMC toolkit workflow begins with the export of an existing CAD geometry from the native CAD to the ACIS format. The ACIS format file is then cleaned using SpaceClaim to remove small holes and component overlaps. Metadata is then assigned to the cleaned geometry file using CUBIT/Trelis from csimsoft (Registered Trademark). The DAGMC plugin script removes duplicate shared surfaces, facets the geometry to a specified tolerance, and ensures that the faceted geometry is water tight. This step also writes the material and scoring information to a standard input file format that the analyst can alter as desired prior to running the radiation transport program. The scoring results can be transformed, via python script, into a 3D format that is viewable in a standard graphics program. RESULTS The CAD model of the US Lab module of the International Space Station, inclusive of all the racks and components, was simplified to remove holes and volume overlaps. Problematic features within the drawing were also removed or repaired to prevent runtime issues. The cleaned drawing was then run through the DAGMC workflow to prepare for analysis. Pilot tests modeling transport of 1GeV proton and 800MeV/A oxygen sources show that reasonable results are converged upon in an acceptable amount of overall computation time from drawing preparation to data analysis. The FLUKA radiation transport code will next be used to model both a GCR and a trapped radiation source. These results will then be compared with measurements that have been made by the radiation instrumentation deployed inside the US Lab module. DISCUSSION Early analyses have indicated that the DAGMC workflow is a promising toolkit for running vehicle geometries of interest to NASA through multiple radiation transport codes. In addition, recent work has shown that a realistic human phantom, provided via a subcontract with the University of Florida, can be placed inside any vehicle geometry for a combinatorial analysis. This added functionality gives the user the ability to score various parameters at the organ level, and the results can then be used as input for cancer risk models.

Barzilla, J. E.↗