Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “interferometry observations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24
All sourcesNASA NTRSDOE OSTI
NASA NTRS1978

Principles of very-long-baseline interferometry

The basic principles of very-long-baseline interferometry as related to its use in the determination of vector baselines, polar motion, and earth rotation are presented. Aspects relevant to geodetic applications that involve observations of extragalactic radio sources are covered. The instrumentation used in these observations and the basic observables and their simplest interpretation are described. Complications of the interpretation due to the various geophysical 'signals' and nongeophysical 'noise' that affect the observables are considered.

Shapiro, I. I.↗
NASA NTRS1986

Precise orbit determination of a geosynchronous satellite with differential very-long-baseline interferometry

The use of differential VLBI (DVLBI) to determine the orbit of a U.S. geosynchronous satellite with a position accuracy of a few meters is examined. DVLBI was employed to track the geosynchronous satellite DSCS-II; two observation channels with 2 MHz bandwidth each in a 2 GHz band were used to receive the telemetry signal of the satellite and quasar radio signals. The random observation, delay, station location, and quasar position errors are discussed. The correlation processing of the quasar and satellite signals is described. The accuracy of the estimated satellite position is evaluated using a covariance analysis. It is determined that the satellite position was estimated with an accuracy of about 4 m at the center of the observation arc. It is noted that the modeling error of the solar radiation pressure factor, ionospheric correction error, and observation error need to be corrected in order to provide more accurate orbit determinations.

Shiomi, Tadashi↗
NASA NTRS1980

Mark 3 interactive data analysis system

The interactive data analysis system, a major subset of the total Mark 3 very long baseline interferometry (VLBI) software system is described. The system consists of two major and a number of small programs. These programs provide for the scientific analysis of the observed values of delay and delay rate generated by the VLBI data reduction programs and product the geophysical and astrometric parameters which are among the ultimate products of VLBI. The two major programs are CALC and SOLVE. CALC generates the theoretical values of VLBI delay rate as well as partial derivatives based on apriori values of the geophysical and astronometric parameters. SOLVE is a least squares parameters estimation program which yields the geophysical and astrometric parameters using the observed values by the data processing system and theoretical values and partial derivatives provided by CALC. SOLVE is a highly interactive program in which the user selects the exact form of the recovered parameters and the data to be accepted into the solution.

Ryan, J. W.↗
NASA NTRS1990

Numerical simulation of solar wind density fluctuations and their effects on VLF radio interferometry

A mission consisting of an array of small satellites has been proposed to investigate radio sources at frequencies from approximately 2 to 20 MHz, a range unobservable from the ground because of ionospheric absorption and aberrations. Such a mission seems feasible and relatively inexpensive, but further investigation is still necessary. The solar wind is a major concern because it contains turbulence-induced random density variations that cause a fluctuating phase shift in any electromagnetic signal passing through, sometimes making radio source imaging by interferometry impossible. A numerical simulation has been developed which attempts to accurately characterize solar wind density fluctuations. Results have allowed more concrete conclusions to be drawn about observing constraints and have shown that interferometric imaging at radio frequencies below 10 MHz with baselines up to 100 km is possible at solar elongation angles of about 90 deg or more.

Williamson, Robert S., III↗
NASA NTRS1992

Periodic and chaotic spatiotemporal states in a phase-conjugate resonator using a photorefractive BaTiO3 phase-conjugate mirror

The dynamics of an externally pumped phase-conjugate resonator that uses four-wave mixing in BaTi03 is investigated experimentally. The emergence of spatiotemporal instabilities as the degree of transverse confinement is varied by changing the Fresnel number is described in detail. Local intensity time series show that relaxing the transverse confinement leads the system from a stationary state to periodic, then to quasi-periodic, motions and finally to chaotic behavior. In some regions of parameter space two frequencies are identified in the power spectra of the time series, indicating a route to chaos following the Ruelle-Takens-Newhouse scheme. Wave-front topological defects are identified by interferometry. As the system's confinement is varied, the phase-defect density and the spatial correlation index are found to follow similar trends, indicating that the observed spatiotemporal dynamics may indeed be an example of defect-mediated turbulence.

Liu, Siuying R.↗
NASA NTRS2005

Accessing Small Inner Working Angles with a Rotating Sub-Aperture Nuller

A new approach to high contrast observations near bright stars with a single-aperture telescope is discussed, which is based on the idea of a rotating separated-aperture nulling interferometer. The approach can be described as a rotating sub-aperture nuller, because it nulls two or more sub-apertures within a single telescope's pupil, and uses baseline rotation to modulate the signals from off-axis sources in a manner similar to that of potential space-based nulling interferometers. The sub-aperture beams can be combined in a number of ways, including a fiber nuller and a rotational shearing interferometer. Such a rotating nulling coronagraph has two great advantages. First, it can be used on a ground-based telescope to test signal reconstruction approaches pertinent to potential space-based nulling interferometers. Moreover, it also has the potential to enable ground-based coronagraphic observations of faint off-axis companions very close to bright stars.

coronagraphy↗
NASA NTRS2004

Formations of Tethered Spacecraft as Stable Platforms for Far IR and Sub-mm Astronomy

In this paper we describe current research in tethered formations for interferometry, and a roadmap to demonstrating the required key technologies via on-ground and in-orbit testing. We propose an integrated kilometer-size tethered spacecraft formation flying concept which enables Far IR and Sub-mm astronomy observations from space. A rather general model is used to predict the dynamics, control, and estimation performance of formations of spacecraft connected by tethers in LEO and deep space. These models include the orbital and tethered formation dynamics, environmental models, and models of the formation estimator/controller/commander. Both centralized and decentralized control/sensing/estimation schemes are possible, and dynamic ranges of interest for sensing/control are described. Key component/subsystem technologies are described which need both ground-based and in-orbit demonstration prior to their utilization in precision space interferometry missions using tethered formations. Defining an orbiting formation as an ensemble of orbiting spacecraft performing a cooperative task, recent work has demonstrated the validity of the tethering the spacecraft to provide both the required formation rigidity and satisfy the formation reconfiguration needs such as interferometer baseline control. In our concept, several vehicles are connected and move along the tether, so that to reposition them the connecting tether links must vary in length. This feature enables variable and precise baseline control while the system spins around the boresight. The control architecture features an interferometer configuration composed of one central combiner spacecraft and two aligned collector spacecraft. The combiner spacecraft acts as the formation leader and is also where the centralized sensing and estimation functions reside. Some of the issues analyzed with the model are: dynamic modes of deformation of the distributed structure, architecture of the formation sensor, and sources of dynamical perturbation that need to be mitigated for precision operation in space. Examples from numerical simulation of an envisioned scenario in heliocentric orbit demonstrate the potential of the concept for space interferometry.

Quadrelli, Marco B.↗
NASA NTRS1998

Determination of an Infrared Reference Frame

The mission of the European Space Agency's Hipparcos satellite was to provide high precision astrometric and photometric data for over 100,000 stars and somewhat lower precision data on over a million additional stars. These observations were made in the optical band (340 - 850 nm) and resulted in median precisions of better than 1 milli-arcsec (mas) in position and parallax and I mas/yr in proper motion. The Hipparcos frame is inertial within an estimated uncertainty of +/- 0.25 mas/yr. The other important wavelength band for astrometry has been the radio band. A reference frame has been defined based on absolute Very Long Baseline Interferometry (VLBI) positions of several hundreds of radio sources. There have been a number of projects to refine the link between the optical and radio reference frames. In recent years there has been increasing interest in the astrometry of infrared sources. For example, stars with circumstellar shells can be observed in both the optical and radio (e.g. SiO maser emission). The infrared emission from such sources is dominated by thermal dust emission. The spatial distribution of radiation in the three bands is expected to be quite different. In 1982 we proposed a number of infrared-selected sources (S(sub 10 micron) greater than or approx. equal to 100 J(sub y)) for inclusion in the Hipparcos Input Catalog. Most of those sources were observed, and in Sutton (1997) we report the optical astrometric results (position, proper motion, and parallax) for 87 such sources. These sources were selected to have reasonable agreement between infrared and optical positions, and so may be used as primary standards for future infrared astrometry. They are well distributed across the sky, but exhibit some bias towards the galactic plane and the northern hemisphere. We have also obtained a set of 1480 secondary standards (unpublished) A comparison between optical positions and 86 GHz SiO maser positions for 10 sources indicates coincidence at the 0.15 arcsec level, consistent with current uncertainties in the SiO positions. Improved measurements of the SiO maser positions are needed. VLBI data show that SiO maser spots can be distributed in broken rings of radii 10 - 30 mas, presumably centered on the stellar position. However the SiO flux may be distributed asymmetrically, in which case the flux-weighted center of the SiO emission can be different from the stellar position. We have also published a related paper on phase fluctuations in millimeter interferometry (Sutton and Hueckstaedt 1996). Radiometric monitoring of emission from atmospheric water vapor may be a method for correcting for such fluctuations. This is relevant to positional determinations at centimeter and millimeter wavelengths. The integration of visible, infrared, and radio astrometry is one of our principal goals.

Sutton, Edmund C.↗
NASA NTRS1983

The LeRC rail accelerators: Test designs and diagnostic techniques

The feasibility of using rail accelerators for various in-space and to-space propulsion applications was investigated. A 1 meter, 24 sq mm bore accelerator was designed with the goal of demonstrating projectile velocities of 15 km/sec using a peak current of 200 kA. A second rail accelerator, 1 meter long with a 156.25 sq mm bore, was designed with clear polycarbonate sidewalls to permit visual observation of the plasma arc. A study of available diagnostic techniques and their application to the rail accelerator is presented. Specific topics of discussion include the use of interferometry and spectroscopy to examine the plasma armature as well as the use of optical sensors to measure rail displacement during acceleration. Standard diagnostics such as current and voltage measurements are also discussed.

Zana, L. M.↗
NASA NTRS1984

LeRC rail accelerators - Test designs and diagnostic techniques

The feasibility of using rail accelerators for various in-space and to-space propulsion applications was investigated. A 1 meter, 24 sq mm bore accelerator was designed with the goal of demonstrating projectile velocities of 15 km/sec using a peak current of 200 kA. A second rail accelerator, 1 meter long with a 156.25 sq mm bore, was designed with clear polycarbonate sidewalls to permit visual observation of the plasma arc. A study of available diagnostic techniques and their application to the rail accelerator is presented. Specific topics of discussion include the use of interferometry and spectroscopy to examine the plasma armature as well as the use of optical sensors to measure rail displacement during acceleration. Standard diagnostics such as current and voltage measurements are also discussed. Previously announced in STAR as N83-35053

Zana, L. M.↗
NASA NTRS1984

Geosynchronous orbiter tracking by VLBI - Demonstration design

A demonstration has been designed to determine the three dimensional position of a satellite in geosynchronous earth orbit, with 5 meter accuracy, using tracking techniques based on very-long-base-line interferometry (VLBI). Two experiments are analyzed: the first uses tracking stations in California, Australia, and Guam, and the second uses stations in California, Australia, and Japan. Satellite VLBI observables are defined and measurement errors are predicted. Both experiments employ alternate observations between the satellite and extra-galactic radio sources to determine the satellite plane-of-sky position. Positional accuracy resulting from various combinations of data acquired over the satellite's orbital period is discussed. A strategy is devised for resolving integer cycle phase ambiguities, inherent in VLBI, without relying on an externally provided reference trajectory.

Border, J. S.↗
NASA NTRS1985

Comparison of GSFC and JPL VLBI modeling software: Benchmark

The Very Long Base Interferometry. The VLBI modeling software packages CALC 6.0 (GSFC) and MASTERFIT (JPL) are compared in some detail. Theoretical model delays are calculated for a set of 120 fictitious observations which involve a variety of sources, baselines, and antennas. Discrepancies between the total delays given by the two programs are of the order of 2 cm (RMS). The modeling of antenna offsets appears to account for approximately half of this difference. Relativistic bending contributions to the delay differ by 3 cm (RMS), and the there appears to be some mutual cancellation of errors involving antenna offsets, bending, and the effects of the two different Solar System ephemerides employed by CALC and MASTERFIT. This cancellation has not been completely characterized here.

Sovers, O. J.↗
NASA NTRS2009

DSN Beowulf Cluster-Based VLBI Correlator

The NASA Deep Space Network (DSN) requires a broadband VLBI (very long baseline interferometry) correlator to process data routinely taken as part of the VLBI source Catalogue Maintenance and Enhancement task (CAT M&E) and the Time and Earth Motion Precision Observations task (TEMPO). The data provided by these measurements are a crucial ingredient in the formation of precision deep-space navigation models. In addition, a VLBI correlator is needed to provide support for other VLBI related activities for both internal and external customers. The JPL VLBI Correlator (JVC) was designed, developed, and delivered to the DSN as a successor to the legacy Block II Correlator. The JVC is a full-capability VLBI correlator that uses software processes running on multiple computers to cross-correlate two-antenna broadband noise data. Components of this new system (see Figure 1) consist of Linux PCs integrated into a Beowulf Cluster, an existing Mark5 data storage system, a RAID array, an existing software correlator package (SoftC) originally developed for Delta DOR Navigation processing, and various custom- developed software processes and scripts. Parallel processing on the JVC is achieved by assigning slave nodes of the Beowulf cluster to process separate scans in parallel until all scans have been processed. Due to the single stream sequential playback of the Mark5 data, some ramp-up time is required before all nodes can have access to required scan data. Core functions of each processing step are accomplished using optimized C programs. The coordination and execution of these programs across the cluster is accomplished using Pearl scripts, PostgreSQL commands, and a handful of miscellaneous system utilities. Mark5 data modules are loaded on Mark5 Data systems playback units, one per station. Data processing is started when the operator scans the Mark5 systems and runs a script that reads various configuration files and then creates an experiment-dependent status database used to delegate parallel tasks between nodes and storage areas (see Figure 2). This script forks into three processes: extract, translate, and correlate. Each of these processes iterates on available scan data and updates the status database as the work for each scan is completed. The extract process coordinates and monitors the transfer of data from each of the Mark5s to the Beowulf RAID storage systems. The translate process monitors and executes the data conversion processes on available scan files, and writes the translated files to the slave nodes. The correlate process monitors the execution of SoftC correlation processes on the slave nodes for scans that have completed translation. A comparison of the JVC and the legacy Block II correlator outputs reveals they are well within a formal error, and that the data are comparable with respect to their use in flight navigation. The processing speed of the JVC is improved over the Block II correlator by a factor of 4, largely due to the elimination of the reel-to-reel tape drives used in the Block II correlator.

Rogstad, Stephen P.↗
NASA NTRS2020

Scheduling Mission Reconfiguration for an Interferometry Synthetic Aperture Radar Using Deep Reinforcement Learning

This paper presents a method to intelligently adapt the baseline of a synthetic aperture radar based on Deep Rein- forcement Learning to help create plans for missions that use formation flight for Earth observation purposes. The main contribution of this paper is the initial results we have found from applying the tool to a toy mission: measuring the ver- tical structure of forests by using a synthetic aperture radar mounted on a formation of 7 satellites orbiting the Earth in a Sun Synchronous Orbit. We have found that with a reward function based on expected science return over time and fuel usage, the Deep Reinforcement Learning planner is able to create plans with positive scientific returns while minimizing fuel usage. We also find that fuel usage and collision avoid- ance planning is better done with traditional methods, as Deep Reinforcement Learning does not converge to optimal solutions.

Viros-i-Martin, Antoni↗
NASA NTRS1981

The Telecommunications and Data Acquisition

Progress in the development and operations of the Deep Space Network is reported including developments in Earth based radio technology as applied to other research programs. These programs include application of radio interferometry at microwave frequencies to geodetic measurements and geodynamics, use of deep space stations individually and in pairs as an interferometer by radio astronomers for astrophysics research by direct observations of radio sources, and radio search for extraterrestrial intelligence in the microwave region of the electromagnetic spectrum.

Renzetti, N. A.↗
NASA NTRS1982

Observations of tropospheric phase scintillations at 5 GHz on vertical paths

The article presents observations of turbulence-induced tropospheric phase fluctuations measured at 5 GHz on the near-vertical paths relevant to many astronomical and geophysical measurements. The data are summarized as phase power spectra, structure functions, and Allan variances. Comparisons to other microwave observations indicate relatively good agreement in both the level and shape of the power spectrum of these tropospheric phase fluctuations. Implications for precision Doppler tracking of spacecraft and geodesy/radio interferometry are discussed.

Armstrong, J. W.↗