SEARCH · Engineering Papers
Results for “intercalation materials”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Deciphering the local structure of Prussian blue analogue cathodes with Raman spectroscopy for sodium-ion batteries
Iron-based Prussian blue analogues (PBAs) have gained attention as low-cost, relatively higher-potential cathodes for sodium-ion batteries, due to their open 3D-framework structures. However, understanding the local structural changes is critical to unveiling the intercalation pathways and degradation mechanisms. We employ here operando Raman spectroscopy to probe the changes in the cyanide vibrational modes during cycling and degradation after cycling, which are not adequately resolved by X-ray diffraction due to the low structure factor and limited X-ray sensitivity of the cyanide groups. Vibrational spectroscopy has thus proven essential for deciphering these complex materials. Additionally, we implement pre-sodiation strategies to assess the impact of sodium inventory loss by pairing PBAs with a hard carbon anode in a full-cell configuration. Operando galvanostatic electrochemical impedance spectroscopy (EIS) and ex situ X-ray photoelectron spectroscopy (XPS) further elucidate the interface evolution and the role of water molecules in forming the cathode-electrolyte interphase (CEI) and solid-electrolyte interphase (SEI). The insights gained advance the understanding of PBAs and enhance their practical viability.
Bench-scale Development of a Transformational Graphene Oxide-based Membrane Process for Post-combustion CO 2 Capture
Graphene-based materials, such as graphene and graphene oxide (GO), have been considered as next-generation membrane materials. GTI Energy and The State University of New York at Buffalo (UB) have been developing a transformational GO-based membrane process (designated as GO2) that integrates a high CO 2 /N 2 selectivity membrane (GO-1) and a high CO 2 flux membrane (GO-2) for post-combustion CO 2 capture. An innovative membrane structure, consisting of GO nanochannels intercalated by single-walled carbon nanotube (SWCNT), was developed. The membrane prepared on hollow fiber substrate showed CO 2 permeance as high as 1,300 GPU with CO 2 /N 2 selectivity >200. The membranes were successfully scaled up to effective area of 50-100 cm 2 . The 50-100 cm 2 membranes showed CO 2 /N 2 selectivity ≥200 and CO 2 permeance ≥1,000 GPU for the GO-1 type, and CO 2 /N 2 selectivity ≥20 and CO 2 permeance ≥2,500 GPU for the GO-2 type. The CO 2 capture performance of the GO-based membranes was tested using a simulated flue gas. The testing results indicate that the GO-based membranes are stable in the presence of flue gas contaminants. The GO-based membranes were then further scaled up to a surface area of 1,000 cm 2 . Good stability was achieved during an integrated testing with GO-1 and GO-2 membranes using simulated flue gas. A bench-scale system was designed, constructed, and tested at the National Carbon Capture Center (NCCC). Good stability was achieved during testing of a single-stage process with >10 shutdowns/startups at NCCC. During the integrated testing, the membranes showed good stability at 50°C and 57°C. 70-90% CO 2 removal efficiencies and ≥95% CO 2 purity were validated during the steady state operation at NCCC. Techno-economic analysis indicates the GO2 membrane-based process technology provides a reduction in both the levelized cost of electricity (LCOE) and cost of capture when compared to the reference B12B case presented in the Cost and Performance Baseline for Fossil Energy Plants Volume 1: Bituminous Coal and Natural Gas to Electricity study prepared by the National Energy Technology Laboratory (NETL), before considering any system optimization or improvement opportunities. The benefits are primarily driven by a reduction in the equipment costs of the CO 2 capture process vs. the solvent-based reference process in NETL Case B12B as well as a decrease in the base plant size.
Revealing Reaction Pathways of Collective Substituted Iron Fluoride Electrode for Lithium Ion Batteries
Metal fluorides present a high redox potential among the conversion-type compounds, which make them specially work as cathode materials of lithium ion batteries. To mitigate the notorious cycling instability of conversion-type materials, substitutions of anion and cation have been proposed but the role of foreign elements in reaction pathway is not fully evaluated. In this work, we explored the lithiation pathway of a rutile-Fe 0.9 Co 0.1 OF cathode with multimodal analysis, including ex situ and in situ transmission electron microscopy and synchrotron X-ray techniques. Our work revealed a prolonged intercalation–extrusion–cation disordering process during phase transformations from the rutile phase to rocksalt phase, which microscopically corresponds to topotactic rearrangement of Fe/Co–O/F octahedra. During this process, the diffusion channels of lithium transformed from 3D to 2D while the corner-sharing octahedron changed to edge-sharing octahedron. DFT calculations indicate that the Co and O cosubstitution of the Fe 0.9 Co 0.1 OF cathode can improve its structural stability by stabilizing the thermodynamic semistable phases and reducing the thermodynamic potentials. We anticipate that our study will inspire further explorations on untraditional intercalation systems for secondary battery applications.
All‐Printed Ultrahigh‐Responsivity MoS 2 Nanosheet Photodetectors Enabled by Megasonic Exfoliation
Abstract Printed 2D materials, derived from solution‐processed inks, offer scalable and cost‐effective routes to mechanically flexible optoelectronics. With micrometer‐scale control and broad processing latitude, aerosol‐jet printing (AJP) is of particular interest for all‐printed circuits and systems. Here, AJP is utilized to achieve ultrahigh‐responsivity photodetectors consisting of well‐aligned, percolating networks of semiconducting MoS 2 nanosheets and graphene electrodes on flexible polyimide substrates. Ultrathin (≈1.2 nm thick) and high‐aspect‐ratio (≈1 μm lateral size) MoS 2 nanosheets are obtained by electrochemical intercalation followed by megasonic atomization during AJP, which not only aerosolizes the inks but also further exfoliates the nanosheets. The incorporation of the high‐boiling‐point solvent terpineol into the MoS 2 ink is critical for achieving a highly aligned and flat thin‐film morphology following AJP as confirmed by grazing‐incidence wide‐angle X‐ray scattering and atomic force microscopy. Following AJP, curing is achieved with photonic annealing, which yields quasi‐ohmic contacts and photoactive channels with responsivities exceeding 10 3 A W −1 that outperform previously reported all‐printed visible‐light photodetectors by over three orders of magnitude. Megasonic exfoliation coupled with properly designed AJP ink formulations enables the superlative optoelectronic properties of ultrathin MoS 2 nanosheets to be preserved and exploited for the scalable additive manufacturing of mechanically flexible optoelectronics.
Mechanism of Lithium Ion Exchange Into Spinel Manganese Oxide
Lithium manganese oxide (LMO) is an effective absorbent for lithium recovery from brines, characterized by its high adsorption capacity, excellent regeneration performance, and selectivity. Here, this study investigates the mechanisms of material degradation during lithium loading and unloading in LMO, employing a combination of time‐resolved Raman spectroscopy, X‐ray diffraction, and X‐ray photoelectron spectroscopy. Key findings reveal that the A 1g vibrational mode wavenumber shifts from 635 cm −1 at the onset of lithium ion exchange to 656 cm −1 after 12 min, indicating local symmetry loss and manganese (Mn) loss during lithium intercalation. The proposed lithium exchange mechanism involves initial occupation of tetrahedral interstitial voids, followed by migration into interstitial sites between Mn octahedral sites. Computational modeling suggests that the loss of symmetry in MnO cubane‐like groups occurs as lithium migrates, significantly affecting the Raman spectra. Importantly, the study demonstrates that after 100 cycles of lithium/hydrogen loading, a 24% loss in Mn is observed, which correlates with decreased structural stability; however, the structural integrity of LMO is enhanced when subjected to multiple cycles without complete loading. Here, these insights contribute to the understanding of LMO's performance in lithium recovery applications and highlight potential strategies to optimize its use in future technologies.
Kramers nodal lines in intercalated TaS 2 superconductors
Kramers degeneracy is one fundamental embodiment of the quantum mechanical nature of particles with half-integer spin under time reversal symmetry. Under the chiral and noncentrosymmetric achiral crystalline symmetries, Kramers degeneracy emerges respectively as topological quasiparticles of Weyl fermions and Kramers nodal lines (KNLs), anchoring the Berry phase-related physics of electrons. However, an experimental demonstration for ideal KNLs well isolated at the Fermi level is lacking. Here, we establish a class of noncentrosymmetric achiral intercalated transition metal dichalcogenide superconductors with large Ising-type spin-orbit coupling, represented by In x TaS 2 , to host an ideal KNL phase. We provide evidence from angle-resolved photoemission spectroscopy with spin resolution, angle-dependent quantum oscillation measurements, and ab-initio calculations. Our work not only provides a realistic platform for realizing and tuning KNLs in layered materials, but also paves the way for exploring the interplay between KNLs and superconductivity, as well as applications pertaining to spintronics, valleytronics, and nonlinear transport.
Integrating computation and experiment to investigate photoelectrodes for solar water splitting at the microscopic scale.
CONSPECTUS: Photoelectrochemical water-splitting is a promising and sustainable way to store the energy of the sun in chemical bonds and use it to produce hydrogen gas, a clean fuel. The key components in photoelectrochemical cells (PECs) are photoelectrodes, including a photocathode that reduces water to hydrogen gas and a photoanode that oxidizes water to oxygen gas. Materials used in photoelectrodes for PECs must effectively absorb sunlight, yield photogenerated carriers, and exhibit electronic properties that enable the efficient shuttling of carriers to the surface to participate in relevant water-splitting reactions. Discovering and understanding the key characteristics of optimal photoelectrode materials is paramount to the realization of PEC technologies. Oxide-based photoelectrodes can satisfy many of these materials requirements, including stability in aqueous environments, band edges with reasonable alignment with the redox potentials for water splitting, and ease of synthesis. However, oxide photoelectrodes generally suffer from poor charge transport properties and considerable bulk electron-hole separation, and they have relatively large band gaps. Numerous strategies have been proposed to improve these aspects and understand how these improvements are reflected in the photoelectrochemical performance. Unfortunately, the structural and compositional complexity of multinary oxides accompanied by the inherent complexity of photoelectrochemical processes makes it challenging to understand the individual effects of composition, structure, and defects in the bulk and on the surface on a material's photoelectrochemical properties. The integration of experiment and theory has great potential to increase our atomic-level understanding of structure-composition-property relationships in oxide photoelectrodes. In this Account, we describe how integrating experiment and theory is beneficial for achieving scientific insights at the microscopic scale. We highlight studies focused on understanding the role of (i) bulk composition via solid-state solutions, intercalation, and comparison with isoelectronic compounds, (ii) dopants for both the anion and cation and their interactions with oxygen vacancies, and (iii) surface/interface structure in the photocurrent generation and photoelectrochemical performance in oxide photoelectrodes. In each instance, we outline strategies and considerations for integrating experiment and theory and describe how this integration led to valuable insights and new directions in uncovering structure-composition-property relationships. Our aim is to demonstrate the unique value of combining experiment and theory in studying photoelectrodes and to encourage the continued effort to bring experiment and theory in closer step with each other.
Compressed Expanded Natural Graphite (CENG) Processing for PCM Composites
The use of phase change materials (PCMs) in thermal energy storage applications has received considerable attention in recent decades. Organic PCMs are popular due to their high latent heat of fusion, noncorrosive properties, and relative stability over many charge and discharge cycles. A primary limitation of these materials is their low thermal conductivity. This has led researchers to develop various methods to increase thermal conductivity by seeding PCM with or impregnating them into more conductive materials. One method is to impregnate PCMs into compressed expanded natural graphite (CENG) matrices, which can improve thermal conductivity by a factor of 100. CENG matrices have received particular interest due to their low cost, high porosity, small (nano/micro) pore size, high pore density, high thermal conductivity, and ability to be compressed into many geometries. PCM/CENG matrix composites have been extensively studied; however, the effect that CENG processing has on PCM saturation and the overall matrix thermal conductivity has not been well investigated. This processing includes four major steps including graphite intercalation, thermal shock, compression, and PCM saturation. Intercalation involves soaking graphite flakes in sulfuric and/or nitric acid to intercalate the acids between the graphene layers. The graphite flakes are then subjected to a high-temperature thermal shock, during which the intercalated acid is gasified rapidly, pushing the graphene layers apart, resulting in accordion-shaped graphite "worms". The "worms" are then compacted to a desired bulk density and then soaked with molten PCM until fully saturated. The properties of the produced CENG matrix, and its ability to allow PCM permeation, are sensitive to the processing parameters, namely, the thermal shock temperature and exposure time, as well as the matrix apparent density or porosity. Here, we study the effect of the thermal shock conditions necessary to expand intercalated graphite flakes on PCM saturation and the expanded graphite's thermal conductivity and morphology. We found that the thermal shock temperature exhibits the greatest influence. At greater shock temperatures, SEM images showed that expanded graphite worms exhibited greater density of pores, thus increasing total surface area within the matrices. Increasing thermal shock temperature yielded greater overall PCM saturation, as well as an increased rate of saturation. Improvements in PCM saturation rate and overall saturation are obtained as the shock temperature is increased. Longer exposure to thermal shock also improves initial saturation rates and is beneficial if a shortened impregnation time is needed. Thermal shock conditions did not impact thermal conductivity; however, conductivity was largely affected by matrix porosity. A local maximum in axial thermal conductivity was observed at around 83% porosity, which is similar to that observed in previous studies.
Computational Investigation of MAX as Intercalation Host for Rechargeable Aluminum‐Ion Battery
Abstract Layered carbides and their analogs with MAX phase (general formula AM n+1 X n ) have emerged as promising candidates for energy storage and conversion applications. One frontier for energy storage is using MAX as an Al‐ion intercalation electrode. Given that many MAXs have Al as the A sites, the structure can potentially serve as a stable host for Al intercalation. Here in this work, 425 ternary MAX Al‐ion battery electrodes are computationally enumerated. Specifically, first principal phase diagram calculations are performed on the combinatorial space of 17 types of typical transition metals, five types of anions (C, N, B, Si, and P), three types of stoichiometries (n = 1, 2, and 3) and two types of layered stackings (α and β). Among all the ternary MAX materials, 44 candidates show reasonable synthetic accessibility, and six with extraordinary performance are predicted to be promising Al‐ion battery electrodes. With the phase stability, and electrochemical performance (average voltage, theoretical capacity, energy density, and Al diffusion barrier), the work provides a comprehensive computational assessment of the great opportunities behind MAX‐based Al‐ion batteries.
Alkali‐Ion‐Assisted Activation of ε‐VOPO 4 as a Cathode Material for Mg‐Ion Batteries
Abstract Rechargeable multivalent‐ion batteries are attractive alternatives to Li‐ion batteries to mitigate their issues with metal resources and metal anodes. However, many challenges remain before they can be practically used due to the low solid‐state mobility of multivalent ions. In this study, a promising material identified by high‐throughput computational screening is investigated, ε‐VOPO 4 , as a Mg cathode. The experimental and computational evaluation of ε‐VOPO 4 suggests that it may provide an energy density of >200 Wh kg −1 based on the average voltage of a complete cycle, significantly more than that of well‐known Chevrel compounds. Furthermore, this study finds that Mg‐ion diffusion can be enhanced by co‐intercalation of Li or Na, pointing at interesting correlation dynamics of slow and fast ions.
Complex-Concentrated Anion Doping Enables Ultra-Stable Lattice Oxygen and Structural Integrity in Lithium-Rich Layered Oxide Cathodes
Lithium- and manganese-rich layered oxides (LMR) stand out as next-generation lithium-ion cathode chemistries, which harness both transition-metal and lattice-oxygen redox processes to deliver exceptional capacity and energy density. However, their full potential is hindered by intrinsic oxygen instability and structural degradation, resulting in pronounced voltage fade and capacity decay. Here, we present a complex-concentrated anion-doping paradigm in which multiple anions, F, Br, and S, are incorporated into the oxygen sublattice to enhance oxygen-redox and structural stability. X-ray absorption spectroscopy and aberration-corrected scanning transmission electron microscopy confirm ultra-stable local oxygen coordination environments during long-term cycling, with detrimental phase transformations and oxygen-loss-induced cavitation dramatically inhibited. Notably, we show that the characteristic LiTM6 transition metal (TM) honeycomb ordering is preserved even after electrochemical cycling. Concurrently, this strategy yields an unprecedented volume change of only 0.63% upon charging to 4.8 V vs. Li+/Li, achieving the first zero-strain LMR cathode. The resulting LMR cathode delivers ultralow voltage fade (1 mV per cycle during the first 100 cycles and becomes negligible in subsequent cycles) and outstanding energy retention (93% after 200 cycles) in a pouch cell configuration. Our complex-concentrated anion-doping concept establishes a broadly applicable strategy for resolving chemo-mechanical failure mechanisms in ceramic intercalation electrodes for next-generation energy storage.
A formal Fe III/V redox couple in an intercalation electrode
Iron redox cycling between low-valent oxidation states of Fe II and Fe III drives crucial processes in nature. The Fe II/III redox couple charge compensates the cycling of lithium iron phosphate, a positive electrode (cathode) for lithium-ion batteries. High-valent iron redox couples, involving formal oxidation higher than Fe III , could deliver higher electrochemical potentials and energy densities. However, because of the instability of high-valent Fe electrodes, they have proven difficult to probe and exploit in intercalation systems. Here, in this study, we report and characterize a formal Fe III/V redox couple by revisiting the charge compensation mechanism of (de)lithiation in Li 4 FeSbO 6 . Valence-sensitive experimental and computational core-level spectroscopy reveal a direct transition from Fe III (3d 5 ) to a negative-charge-transfer FeV (3d 5 L 2 ) ground state on delithiation, without forming Fe IV , or oxygen dimers. We identify that the cation ordering in Li 4 FeSbO 6 drives a templated phase transition to stabilize the unique Fe V species and demonstrate that disrupting cation ordering suppresses the Fe III/V redox couple. Exhibiting resistance to calendar aging, high operating potential and low voltage hysteresis, the Fe III/V redox couple in Li 4 FeSbO 6 provides a framework for developing sustainable, Fe-based intercalation cathodes for high-voltage applications.
Connecting mechanical properties to hydrogen defects in PAN-based carbon fibers
Atomic-level defects dictate the mechanical properties of carbon fibers and strong correlations have been established between the crystallite sizes and mechanical properties. We recently demonstrated similar correlations with hydrogen content, but reliably quantifying the hydrogen content is not possible using only inelastic neutron scattering experiments. Here, we present prompt-gamma activation analysis (PGAA) experiments collected on 20 commercially available carbon fibers to quantify the hydrogen content of carbon fibers and find correlations between fiber modulus and hydrogen content. We then evaluate the role of hydrogen defect type and connect the PGAA results to both newly acquired and recently reported inelastic neutron scattering experiments. In conclusion, we find that intercalated hydrogen defects are preferentially removed at carbonization temperatures required for high-modulus fibers, potentially giving rise to voids within the carbon fibers that undermine their tensile strength.
Mechanical adaptation of brachiopod shells via hydration-induced structural changes
The function-optimized properties of biominerals arise from the hierarchical organization of primary building blocks. Alteration of properties in response to environmental stresses generally involves time-intensive processes of resorption and reprecipitation of mineral in the underlying organic scaffold. Here, we report that the load-bearing shells of the brachiopod Discinisca tenuis are an exception to this process. These shells can dynamically modulate their mechanical properties in response to a change in environment, switching from hard and stiff when dry to malleable when hydrated within minutes. Using ptychographic X-ray tomography, electron microscopy and spectroscopy, we describe their hierarchical structure and composition as a function of hydration to understand the structural motifs that generate this adaptability. Key is a complementary set of structural modifications, starting with the swelling of an organic matrix on the micron level via nanocrystal reorganization and ending in an intercalation process on the molecular level in response to hydration.
Room temperature colossal superparamagnetic order in aminoferrocene–graphene molecular magnets
Intensive studies are published for graphene-based molecular magnets due to their remarkable electric, thermal, and mechanical properties. However, to date, most of all produced molecular magnets are ligand based and subject to challenges regarding the stability of the ligand(s). The lack of long-range coupling limits high operating temperature and leads to a short-range magnetic order. Herein, we introduce an aminoferrocene-based graphene system with room temperature superparamagnetic behavior in the long-range magnetic order that exhibits colossal magnetocrystalline anisotropy of 8 × 10 5 and 3 × 10 7 J/m 3 in aminoferrocene and graphene-based aminoferrocene, respectively. These values are comparable to and even two orders of magnitude larger than pure iron metal. Aminoferrocene [C 10 H 11 FeN] + is synthesized by an electrophilic substitution reaction. It was then reacted with graphene oxide that was prepared by the modified Hammers method. The phase structure and functionalization of surface groups were characterized and confirmed by XRD, FT-IR, and Raman spectroscopy. To model the behavior of the aminoferrocene between two sheets of hydroxylated graphene, we have used density functional theory by placing the aminoferrocene molecule between two highly ordered hydroxylated sheets and allowing the structure to relax. Here, the strong bowing of the isolated graphene sheets suggests that the charge transfer and resulting magnetization could be strongly influenced by pressure effects. In contrast to strategies based on ligands surface attachment, our present work that uses interlayer intercalated aminoferrocene opens routes for future molecular magnets as well as the design of qubit arrays and quantum systems.
Electrochemical Intercalation and Exfoliation of CrSBr into Ferromagnetic Fibers and Nanoribbons
Abstract Recent studies dedicated to layered van der Waals crystals have attracted significant attention to magnetic atomically thin crystals offering unprecedented opportunities for applications in innovative magnetoelectric, magneto‐optic, and spintronic devices. The active search for original platforms for the low‐dimensional magnetism study has emphasized the entirely new magnetic properties of two dimensional (2D) semiconductor CrSBr. Herein, for the first time, the electrochemical exfoliation of bulk CrSBr in a non‐aqueous environment is demonstrated. Notably, crystal cleavage governed by the structural anisotropy occurred along two directions forming atomically thin and few‐layered nanoribbons. The exfoliated material possesses an orthorhombic crystalline structure and strong optical anisotropy, showing the polarization dependencies of Raman signals. The antiferromagnetism exhibited by multilayered CrSBr gives precedence to ferromagnetic ordering in the revealed CrSBr nanostructures. Furthermore, the potential application of CrSBr nanoribbons is pioneered for electrochemical photodetector fabrication and demonstrates its responsivity up to 30 µA cm −2 in the visible spectrum. Moreover, the CrSBr‐based anode for lithium‐ion batteries exhibited high performance and self‐improving abilities. This anticipates that the results will pave the way toward the future study of CrSBr and practical applications in magneto‐ and optoelectronics.