Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “intercalation material”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

Confined Interlayer Water Promotes Structural Stability for High-Rate Electrochemical Proton Intercalation in Tungsten Oxide Hydrates

There is widespread interest in determining the structural features of redox-active electrochemical energy storage materials that enable simultaneous high power and high energy density. Here, we present the discovery that confined interlayer water in crystalline tungsten oxide hydrates, WO 3 · n H 2 O, enables highly reversible proton intercalation at subsecond time scales. By comparing the structural transformation kinetics and confined water dynamics of the hydrates with anhydrous WO 3 , we determine that the rapid electrochemical proton intercalation is due to the ability of the confined water layers to isolate structural transformations to two dimensions while stabilizing the structure along the third dimension. As a result, these water layers provide both structural flexibility and stability to accommodate intercalation-driven bonding changes. Furthermore, this provides an alternative explanation for the fast energy storage kinetics of materials that incorporate structural water and provides a new strategy for enabling high power and high energy density with redox-active layered materials containing confined fluids.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

(Na{sub 4}BH{sub 4}){sup 3+} guests inside aluminosilicate, gallosilicate and aluminogermanate sodalite host frameworks studied by {sup 1}H, {sup 11}B, and {sup 23}Na MAS NMR spectroscopy

We report tetrahydroborate aluminosilicate, gallosilicate and aluminogermanate sodalites studied by {sup 11}B, {sup 1}H and {sup 23}Na MAS NMR spectroscopy. The spectral parameters are consistent with the local environments of each investigated nucleus obtained from the crystal structures. The {sup 11}B MAS NMR spectra exhibit a sharp narrow line at about -49.0 ppm, which is assigned to BH{sub 4}{sup -} enclathrated into the sodalite framework matrix. The lineshape of the signal shows no quadrupolar interactions due to discreteness and high symmetry of the BH{sub 4}{sup -} unit as well as possible fast dynamic site exchange of hydrogen atoms. The {sup 23}Na MAS NMR signals also show a narrow Gaussian lineshape, which clearly indicates a single type of sodium coordination, and a centrosymmetrical charge distribution around the sodium atom. The {sup 1}H MAS NMR spectra can clearly distinguish between hydrogen in BH{sub 4}{sup -} anions (-0.6 ppm), H{sub 3}O{sub 2}{sup -} anions (1.2 ppm) and H{sub 2}O molecules (5.0 ppm). The structural properties of BH{sub 4}{sup -} intercalation into sodalite framework matrix help connect the microporous materials to hydride-containing A, X and Y type zeolites.

36 MATERIALS SCIENCE↗

Effects of Synthesis and Processing on Optoelectronic Properties of Titanium Carbonitride MXene

MXenes, a relatively new class of two-dimensional (2D) transition-metal carbides, carbonitrides, and nitrides, exhibit unique properties such as high electronic conductivity, a wide range of optical characteristics, hydrophilicity, and mechanical stability. Because of the high electronic conductivity, MXenes have shown promise in many applications, such as energy storage, electromagnetic interference shielding, antennas, and transparent coatings. 2D titanium carbide (Ti 3 C 2 T x , where T x represents surface terminations), the first discovered and most studied MXene, has the highest electronic conductivity exceeding 10 000 S cm –1 . There have been several efforts to alter the conductivity of MXenes, such as manipulation of the transition-metal layer and control of surface terminations. However, the impact of the C and N site composition on electronic transport has not been explored. In this study, the effects of synthesis methods on optoelectronic properties of 2D titanium carbonitride, Ti 3 CNT x , were systematically investigated. We show that Ti 3 CNT x , which hosts a mix of carbon and nitrogen atoms in the X layer, has lower electronic conductivity and a blue shift of the main absorption feature within the UV–visible spectrum, compared to Ti 3 C 2 T x . Moreover, intercalants such as water and tetraalkylammonium hydroxides decrease the electronic conductivity of MXene due to increased interflake resistance, leading to an increase in resistivity with decreasing temperature as observed in ensemble transport measurements. When the intercalants are removed, Ti 3 CNT x exhibits its intrinsic metallic behavior in good agreement with Hall measurements and transport properties measured on single-flake field-effect transistor devices. Finally, the dependence of conductivity of Ti 3 CNT x on the presence of intercalants opens wide opportunities for creating MXene-based materials with tunable electronic properties.

36 MATERIALS SCIENCE↗

Purely electronic mechanism of electrolyte gating of indium tin oxide thin films

Epitaxial indium tin oxide films have been grown on both LaAlO 3 and yttria-stabilized zirconia substrates using RF magnetron sputtering. Electrolyte gating causes a large change in the film resistance that occurs immediately after the gate voltage is applied, and shows no hysteresis during the charging/discharging processes. When two devices are patterned next to one another and the first one gated through an electrolyte, the second one shows no changes in conductance, in contrast to what happens in materials (like tungsten oxide) susceptible to ionic electromigration and intercalation. These findings indicate that electrolyte gating in indium tin oxide triggers a pure electronic process (electron depletion or accumulation, depending on the polarity of the gate voltage), with no electrochemical reactions involved. Electron accumulation occurs in a very thin layer near the film surface, which becomes highly conductive. These results contribute to our understanding of the electrolyte gating mechanism in complex oxides and may be relevant for applications of electric double layer transistor devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

(abstract) Effect of Electrolyte Composition on Carbon Electrode Performance

Rechargeable lithium cells containing lithium foil anodes are reported to have limited cycle life (at 100% DOD) performance and safety problems. These limitations are understood to be due to the high reactivity of elemental Li with the electrolyte and the formation of high surface area Li during cycling. To mitigate these problems, several lithium alloys and lithium intercalation compounds are being investigated as alternate lithium anode materials. Li(sub x)C has been identified as a promising lithium anode material due to its low equivalent weight, low voltage vs. Li, and improved stability towards various electrolytes. In this paper, we report the results of our studies on the electrolyte evaluation for the Li(sub x)C anode.

lithium carbon electrode electrolyte rechargeable ↗

Impact of intermediate sites on bulk diffusion barriers: Mg intercalation in Mg 2 Mo 3 O 8

The ongoing search for high voltage positive electrode materials for Mg batteries has been primarily hampered by poor Mg mobility in bulk oxide frameworks. Thus motivated by the presence of Mo 3 clusters that can facilitate charge redistribution and the presence of Mg in a non-preferred (tetrahedral) coordination environment, we have investigated the Mg (de)intercalation behavior in layered-Mg 2 Mo 3 O 8 , a potential positive electrode. While no electrochemical activity is observed, chemical demagnesiation of Mg 2 Mo 3 O 8 is successful but leads to amorphization. Subsequent first-principles calculations predict a strong thermodynamic driving force for structure decomposition at low Mg concentrations and high activation barriers for bulk Mg diffusion, in agreement with experimental observations. Further analysis of the Mg diffusion pathway reveals an O–Mg–O dumbbell intermediate site that creates a high Mg 2+ migration barrier, indicating the influence of transition states on setting the magnitude of migration barriers.

25 ENERGY STORAGE↗

Three-dimensional ferromagnetism and magnetotransport in van der Waals Mn-intercalated tantalum disufide

Van der Waals (vdW) ferromagnets are an important class of materials for spintronics applications. The recent discovery of atomically vdW magnets CrI 3 and Cr 2 Ge 2 Te 6 has triggered a renaissance in the area of two-dimensional (2D) magnetism. Herein we systematically studied 2H-Mn 0.28 TaS 2 single crystal, a 2D vdW ferromagnet with T c ~ 82.3K, and a large in-plane magnetic anisotropy. Mn K-edge x-ray absorption spectroscopy was measured to provide information on its electronic state and local atomic environment. The detailed magnetic isotherms measured in the vicinity of T c indicates that the spin coupling inside 2H-Mn 0.28 TaS 2 is of a 3D Heisenberg type coupled with the attractive long-range interaction between spins that decay as J(r) ≈ r –4.85 . Both resistivity ρ(T) and thermopower S(T) exhibit anomalies near T c , confirming that the hole-type transport carriers strongly interact with local moments. Furthermore, an unusual angle-dependent magnetoresistance is further observed, suggesting a possible field-induced novel magnetic structure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Trace Chemical Detection Using Intercalated MXenes as a Signal Enhancing Substrate in Optical Probes

MXenes are 2D materials composed of layered transition metal nitrides or carbides. These materials are synthesized by HF exfoliation from MAX phases (Ti{sub 3}AlC{sub 2}). The 2D nanomaterial was synthesized by the removal of the 'A' element, resulting in a Mxene product (Ti{sub 3}C{sub 2}). MXenes have the general formula M{sub n+1}X{sub n}T{sub x}, where M is an early transition metal, X is Carbon and/or Nitrogen, and T accounts for surface terminated functional groups such as Fluoride, hydroxyl, and oxygen. These materials have very unique properties, similar to graphene, that allows them to be applied in a variety of trace detection techniques including surface-enhanced Raman spectroscopy (SERS). MXenes have also been demonstrated to selectively uptake uranyl ion, UO{sub 2}{sup 2+}. If this property can be combined with SERS or fluorescence detection, it may be possible to use MXenes as the basis for an alternative method to kinetic phosphorescence analysis (KPA) for trace uranyl measurements. Objectives: To confirm that MXene Nano materials are suitable substrates for SERS and sensor development by enhancing Raman signaling. To determine if certain MXene preparation methods yield materials that are more suitable for trace sensing methods. To determine uranyl uptake properties of these MXene materials and test them for analytical signals. Sample Preparation: Preparation of Ti{sub 3}C{sub 2}MXene (at FSU). MXenes were prepared by etching Al from Ti{sub 3}AlC{sub 2} (MAX phase)material. Two etching techniques yield different MXene products: LiF/HCl: Milder reaction, larger MXene flakes. HF: Harsher reaction, smaller flakes, larger layer separation. Products washed to remove etchant, vacuum filtered, and dried. Dried MXene flakes are air-stable. Film preparation for sensor testing (at SRNL): Suspend powder in diH{sub 2}O, purge with Ar, sonicate for 30 min. Centrifuge and collect supernate with suspended particles. Observed LiF-etched Mxene yielded a higher density of particles and darker collected solution. Drop-cast (4 ml) supernate onto slides and dried with Ar. For Rhodamine B (RhB) testing, drop-cast 4 ml drops onto Mxene spots and dried with Ar. Scanning Electron Microscopy conditions: 10 kV Beam energy, high vacuum; Working distance of 8 mm; beam penetration depth appx. 4 microns, beam spot size appx. 2 nanometers. Results: Detection of aluminum correlates with bright spots on image. Presence of aluminum shows that LiF/HCl etching was less thorough than HF etching. Trace Cl detection in LiF images suggests incomplete rinsing. HF has smaller feature size, more layer structure, and increased homogeneity, consistent with expectations. Macroscopic Raman spectroscopy measurements: 532 nm excitation, ∼50 mW with a ∼100 micron spot size (InPhotonics RPB probe). Kaiser Optical Holospec f/1.8 spectrometer with cooled (-60 deg.C) Andor iDus OE420 CCD. LiF 1x supernate showed good signal for trace measurements of Rhodamine B. HF and 1/4x LiF supernates showed little Mxene or Rhodamine B signal. Low deposition densities led to excess background signal from glass slides. For LiF film, response is linear with Rhodamine B concentration over range tested. Will retest with Raman microscope (∼1 micron spot size) to characterize SERS of more dilute LiF and HF etched Mxenes. Conclusions: The LiF etched material was more suitable for macroscopic SERS measurements because it was more concentrated, resulting in a thicker film than the HF etched Mxene and diluted LiF sample. However, the other materials may give greater SERS enhancements, which we hope to determine from measurements with the Raman microscope. From characterization with SEM we concluded that the HF etched Mxene is more uniform/homogenous and has smaller particle size than the LiF etched Mxene. There is still aluminum present in both samples indicating that etching wasn't complete, but the removal of the aluminum was more efficient in the HF method. Path Forward: Observe SERS with Raman microscopy, to obtain better signals for the more diluted samples and be able to compare enhancement effects for the different MXenes. Characterize uranyl sorption into MXene films and test Raman and fluorescence signals. Revisit the etching conditions to improve removal of aluminum. FSU and SRNL will continue to collaborate to create and characterize different Mxene materials and test their usefulness for sensor applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Virtual Electrochemical Strain Microscopy of Polycrystalline LiCoO2 Films

A recently developed technique, electrochemical strain microscopy (ESM), utilizes the strong coupling between ionic current and anisotropic volumetric chemical expansion of lithium-ion electrode materials to dynamically probe the sub-one-hundred? nm inter-facial kinetic intercalation properties. A numerical technique based on the finite element method was developed to analyze the underlying physics that govern the ESM signal generation and establish relations to battery performance. The performed analysis demonstrates that the diffusion path within a thin film is tortuous and the extent of lithium diffusion into the electrode is dependent on the SPM-tip-imposed overpotential frequency. The detected surface actuation gives rise to the development of an electromechanical hysteresis loop whose shape is dependent on grain size and overpotential frequency. Shape and tilting angle of the loop are classified into low and high frequency regimes, separated by a transition frequency which is also a function of lithium diffusivity and grain size, f T = D/l₂. Research shows that the crystallographic orientation of the surface actuated grain has a significant impact on the shape of the loop. The polycrystalline crystallographic orientation of the grains induces a diffusion path network in the electrode which impacts on the mechanical reliability of the battery. Simulations demonstrate that continuous battery cycling results in a cumulative capacity loss as a result of the hysteric non-reversible lithium intercalation. Furthermore, results suggest that ESM has the capability to infer the local out-of-plane lithium diffusivity and the out-of-plane contribution to Vegard tensor.

25 ENERGY STORAGE↗

Metallic conductivity and air stability in copper chloride intercalated carbon fibers

Carbon-copper chloride intercalation compounds have been obtained by using variously graphitized carbon fibers as host materials. The resultant conductors are air stable, thermally stable to 450 K, have electrical resistivities as low as 12.9 microohm cm at room temperature, and have metallic conductivity temperature dependencies. These intercalated fibers have tensile strengths of 160000 psi, and Young's moduli of 25 x 10 to the 6th psi. For aerospace use, 1/(resistivity x density) is a figure of merit. On this basis, a reduction in resistivity by a factor of two will make this conductor competitive with copper.

Oshima, H.↗

Investigation of Factors That Affect the Oxidation State of Ce in the Garnet-Type Structure

Oxide materials that adopt the garnet-type structure (X 3 A 2 B 3 O 12 ) have received attention for a wide variety of applications, one of which is as potential wasteforms for the sequestration of radioactive actinide elements. The actinides are able to be accommodated in the eight-coordinate X site of the garnet structure. This study reported herein focuses on the investigation of Ce substitution into the X site as a surrogate for Pu because of their similar chemical properties. This is accomplished through analysis of the Y 3– z Ce z AlFe 4 O 12 (0.05 ≤ $z$ ≤ 0.20) materials. The effects of the Ce concentration, oxidation state of the Ce in the starting materials, annealing environment, and cooling rate on the local structure and Ce and Fe oxidation states were investigated through analysis of the powder X-ray diffraction patterns and Ce L 3 -edge and Fe K-edge X-ray absorption spectroscopy (XANES) spectra. Analysis of Ce L 3 -edge XANES spectra indicated that Ce was present as both 3+ and 4+ oxidation states, the ratios of which depended on the synthetic conditions. The largest concentration of Ce 4+ was observed when the materials were postannealed at 800 °C following synthesis of the materials at 1400 °C. Variations in the Ce oxidation state are the result of the temperature-dependent Ce 3+ /Ce 4+ redox couple, with Ce 4+ being favored at lower temperatures. Analysis of the Fe K-edge spectra indicated that Fe was only present in the 3+ oxidation state and the Fe coordination number increased with increasing concentration of Ce 4+ , which is necessary to charge balance the system. The materials in this study can be described as an oxygen-intercalated garnet-type structure with the formula Y 3– z Ce z AlFe 4 O 12+δ .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electron Transfer Governed Crystal Transformation of Tungsten Trioxide upon Li Ions Intercalation

Reversible insertion/extraction of ions into a host lattice constitutes the fundamental operating principle of rechargeable battery and electrochromic materials. It is far more commonly observed that insertion of ions into a host lattice can lead to structural evolution of the host lattice, and for the most cases such a lattice evolution is subtle. However, it has never been clear as what kind of factors to control such a lattice structural evolution. Based on tungsten trioxide (WO3) model crystal, we use in situ transmission electron microscopy (TEM) and first principles calculation to explore the nature of Li ions intercalation induced crystal symmetry evolution of WO3. We discovered that Li insertion into the octahedral cavity of WO3 lattice will lead to a low to high symmetry transition, featuring a sequential monoclinic→tetragonal→cubic phase transition. The first principle calculation reveals that the phase transition is essentially governed by the electron transfer from Li to the WO6 octahedrons, which effectively leads to the weakening the W-O bond and modifying system band structure, resulting in an insulator to metal transition. The observation of the electronic effect on crystal symmetry and conductivity is significant, providing deep insights on the intercalation reactions in secondary rechargeable ion batteries and the approach for tailoring the functionalities of material based on insertion of ions in the lattice.

electron transfer↗

Interlayer engineering of Fe 3 GeTe 2 : From 3D superlattice to 2D monolayer

The discoveries of ferromagnetism down to the atomically thin limit in van der Waals (vdW) crystals by mechanical exfoliation have enriched the family of magnetic thin films [C. Gong et al., Nature 546 , 265–269 (2017) and B. Huang et al., Nature 546 , 270–273 (2017)]. However, compared to the study of traditional magnetic thin films by physical deposition methods, the toolbox of the vdW crystals based on mechanical exfoliation and transfer suffers from low yield and ambient corrosion problem and now is facing new challenges to study magnetism. For example, the formation of magnetic superlattice is difficult in vdW crystals, which limits the study of the interlayer interaction in vdW crystals [M. Gibertini, M. Koperski, A. F. Morpurgo, K. S. Novoselov, Nat. Nanotechnol. 14 , 408–419 (2019)]. Here, we report a strategy of interlayer engineering of the magnetic vdW crystal Fe 3 GeTe 2 (FGT) by intercalating quaternary ammonium cations into the vdW spacing. Both three-dimensional (3D) vdW superlattice and two-dimensional (2D) vdW monolayer can be formed by using this method based on the amount of intercalant. On the one hand, the FGT superlattice shows a strong 3D critical behavior with a decreased coercivity and increased domain wall size, attributed to the co-engineering of the anisotropy, exchange interaction, and electron doping by intercalation. On the other hand, the 2D vdW few layers obtained by over-intercalation are capped with organic molecules from the bulk crystal, which not only enhances the ferromagnetic transition temperature ( T C ), but also substantially protects the thin samples from degradation, thus allowing the preparation of large-scale FGT ink in ambient environment.

36 MATERIALS SCIENCE↗

Layer spacing gradient (NaLi) 1–x CoO 2 for electrochemical Li extraction

Designing materials with high Li to Na selectivity is the key for direct extraction of Li from unconventional sources, such as seawater, without complex separations. However, material discovery is hindered by an insufficient understanding on how a material's composition and structure relate to Li selectivity during electrochemical co-intercalation. Here, we synthesized a core-shell structured (NaLi) 1-x CoO 2 with a core Li phase (Li 0.94 CoO 2 ), a shell Na phase (Na 0.51 CoO 2 ), and a transition intermediate phase via Na ion-exchange of parent Li 1-x CoO 2 . We reveal that the chemical compositions and spatial relation of these phases play critical roles in governing high Li to Na selectivity. The core Li phase restricts large layer spacing expansion and inhibits Na intercalation. The shell Na phase serves to maintain the electrode stability against further Na ion exchange. With the layer spacing gradient design, we achieved a high Li selectivity of 1.5 x 10 5 with a recovery of similar to 7.6:1 Li to Na from 1:20,000 initial ratio.

36 MATERIALS SCIENCE↗

Intercalated water in aqueous batteries

The unprecedentedly growing demand for energy storage devices in recent years calls for diversified chemistries with unique advantages. When it comes to safety and cost, aqueous battery systems have attracted tremendous attention. Being a universal solvent, water can solvate the cations with rather high dehydration energy due to the hydrogen bonding environment, relatively small size and high polarity. Such properties make solvent co-intercalation, which is seen in a few of the non-aqueous systems, more likely to happen in aqueous batteries. Hydrated cations show drastically different behaviors from naked cations during intercalation/de-intercalation processes and hence enable many reactions that are otherwise difficult to proceed. This review summarizes the roles of co-intercalated water in aqueous batteries from how water molecules coordinate with cations to examples of water-mediated reactions in different types of host materials.

25 ENERGY STORAGE↗

Unconventional Anomalous Hall Effect Driven by Self‐Intercalation in Covalent 2D Magnet Cr 2 Te 3

Covalent 2D magnets such as Cr 2 Te 3 , which feature self-intercalated magnetic cations located between monolayers of transition-metal dichalcogenide material, offer a unique platform for controlling magnetic order and spin texture, enabling new potential applications for spintronic devices. Here, it is demonstrated that the unconventional anomalous Hall effect (AHE) in Cr 2 Te 3 , characterized by additional humps and dips near the coercive field in AHE hysteresis, originates from an intrinsic mechanism dictated by the self-intercalation. This mechanism is distinctly different from previously proposed mechanisms such as topological Hall effect, or two-channel AHE arising from spatial inhomogeneities. Crucially, multiple Weyl-like nodes emerge in the electronic band structure due to strong spin-orbit coupling, whose positions relative to the Fermi level is sensitively modulated by the canting angles of the self-intercalated Cr cations. These nodes contribute strongly to the Berry curvature and AHE conductivity. This component competes with the contribution from bands that are less affected by the self-intercalation, resulting in a sign change in AHE with temperature and the emergence of additional humps and dips. The findings provide compelling evidence for the intrinsic origin of the unconventional AHE in Cr 2 Te 3 and further establish self-intercalation as a control knob for engineering AHE in complex magnets.

2D magnets↗