Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “inner layers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24
All sourcesNASA NTRSDOE OSTI
NASA NTRS2002

Improved Re-Configurable Sliding Mode Controller for Reusable Launch Vehicle of Second Generation Addressing Aerodynamic Surface Failures and Thrust Deficiencies

In this report we present a time-varying sliding mode control (TV-SMC) technique for reusable launch vehicle (RLV) attitude control in ascent and entry flight phases. In ascent flight the guidance commands Euler roll, pitch and yaw angles, and in entry flight it commands the aerodynamic angles of bank, attack and sideslip. The controller employs a body rate inner loop and the attitude outer loop, which are separated in time-scale by the singular perturbation principle. The novelty of the TVSMC is that both the sliding surface and the boundary layer dynamics can be varied in real time using the PD-eigenvalue assignment technique. This salient feature is used to cope with control command saturation and integrator windup in the presence of severe disturbance or control effector failure, which enhances the robustness and fault tolerance of the controller. The TV-SMC is developed and tuned up for the X-33 sub-orbital technology demonstration vehicle in launch and re-entry modes. A variety of nominal, dispersion and failure scenarios have tested via high fidelity 6DOF simulations using MAVERIC/SLIM simulation software.

Shtessel, Yuri B.↗
NASA NTRS2004

Chondrites and the Protoplanetary Disk, Part 3

Contents include the following: Ca-, Al-Rich Inclusions and Ameoboid Olivine Aggregates: What We Know and Don t Know About Their Origin. Aluminium-26 and Oxygen Isotopic Distributions of Ca-Al-rich Inclusions from Acfer 214 CH Chondrite. The Trapping Efficiency of Helium in Fullerene and Its Implicatiion to the Planetary Science. Constraints on the Origin of Chondritic Components from Oxygen Isotopic Compositions. Role of Planetary Impacts in Thermal Processing of Chondrite Materials. Formation of the Melilite Mantle of the Type B1 CAIs: Flash Heating or Transport? The Iodine-Xenon System in Outer and Inner Portions of Chondrules from the Unnamed Antarctic LL3 Chondrite. Nucleosynthesis of Short-lived Radioactivities in Massive Stars. The Two-Fluid Analysis of the Kelvin-Helmholtz Instability in the Dust Layer of a Protoplanetary Disk: A Possible Path to the Planetesimal Formation Through the Gravitational Instability. Shock-Wave Heating Model for Chonodrule Formation: Heating Rate and Cooling Rate Constraints. Glycine Amide Hydrolysis with Water and OH Radical: A Comparative DFT Study. Micron-sized Sample Preparation for AFM and SEM. AFM, FE-SEM and Optical Imaging of a Shocked L/LL Chondrite: Implications for Martensite Formation and Wave Propagation. Infrared Spectroscopy of Chondrites and Their Components: A Link Between Meteoritics and Astronomy? Mid-Infrared Spectroscopy of CAI and Their Mineral Components. The Origin of Iron Isotope Fractionation in Chondrules, CAIs and Matrix from Allende (CV3) and Chainpur (LL3) Chondrites. Protoplanetary Disk Evolution: Early Results from Spitzer. Kinetics of Evaporation-Condensation in a Melt-Solid System and Its Role on the Chemical Composition and Evolution of Chondrules. Oxygen Isotope Exchange Recorded Within Anorthite Single Crystal in Vigarano CAI: Evidence for Remelting by High Temperature Process in the Solar Nebula. Chondrule Forming Shock Waves in Solar Nebula by X-Ray Flares. Organic Globules with Anormalous Nitrogen Isotopic Compositions in the Tagish Lake Meteorite: Products of Primitive Organic Reactions. Yet Another Chondrule Formation Scenario. CAIs are Not Supernova Condensates. Microcrystals and Amorphous Material in Comets and Primitive Meteorites: Keys to Understanding Processes in the Early Solar System. A Nearby Supernova Injected Short-lived Radionuclides into Our Protoplanetary Disk. REE+Y Systematics in CC and UOC Chondrules. Meteoritic Constraints on Temperatures, Pressures, Cooling Rates, Chemical Compositions, and Modes of Condensation in the Solar Nebula. The I-Xe Record of Long Equilibration in Chondrules from the Unnamed Antarctic Meteorite L3/LL3. Early Stellar Evolution.

Source record↗
NASA NTRS2022

UV Spectropolarimetry With Polstar: Protoplanetary Disks

Polstar is a proposed NASA MIDEX mission that carries a high resolution UV spectropolarimeter capable of measure all four Stokes parameters onboard a 60 cm telescope. The mission has been designed to pioneer the field of time-domain UV spectropolarimetry. Time domain UV spectropolarimetry offers the best resource to determine the geometry and physical conditions of protoplanetary disks from the stellar surface to <5 AU.We detail two key objectives that a dedicated time domain UV spectropolarimetry survey, such as that enabled by Polstar or a similar mission concept, could achieve: 1) Test the hypothesis that magneto-accretion operating in young planet-forming disks around lower-mass stars transitions to boundary layer accretion in planet-forming disks around higher mass stars; and 2) Discriminate whether transient events in the innermost regions of planet-forming disks of intermediate mass stars are caused by inner disk misalignments or from stellar or disk emissions.

John P Wisniewski↗
NASA NTRS1993

The secondary maxima in black hole X-ray nova light curves - Clues toward a complete picture

We study the secondary maxima observed commonly in the X-ray/optical light curves of black hole X-ray novae and show that they can play an important role in our understanding of the X-ray nova phenomenon. We discuss the observational characteristics of the secondary maxima and possible mechanisms to produce them. We propose a complete scenario for black hole X-ray nova events. The main outburst is caused by a disk instability. The second maximum is caused by X-ray evaporation of the matter near the inner Lagrangian (L1) region when the disk becomes optically thin. The third maximum (or the final minioutburst) is due to a mass transfer instability caused by hard X-ray heating of the subphotospheric layers of the secondary during the outburst. We predict that the newly discovered X-ray nova GRO J0422 + 32 may develop a final minioutburst in early 1993 and that its binary orbital period is less than 7 hr.

Chen, Wan↗
NASA NTRS1995

A skin friction gauge for impulsive flows

A new skin friction gauge has been designed for use in impulsive facilities. The gauge was tested in the T4 free piston shock tunnel, at the University of Queensland, using a 1.5 m long plate that formed one of the inner walls of a rectangular duct. The test gas was fair and the test section free stream flow had a stagnation enthalpy of 4.7 MJ/kg. Measurements were conducted in a laminar and turbulent boundary layer. The measurements compared well with laminar and turbulent analytical theory.

Goyne, C. P.↗
NASA NTRS1994

The FU Orionis Outburst as a Thermal Disk Accretion Event: Detailed Calculations and Comparison to Observations

FU Orionis outbursts are temporary large increases in luminosity: x(40-250) thought to occur repeatedly in all low mass young stellar systems. We discuss detailed calculations of viscous accretion disks suggesting that FU Ori events signify the existence of a protostellar disk transporting mass at a rate of (1-10) x 10(exp -6) Solar Mass/yr, in agreement with theoretical and observational estimates of molecular cloud core collapse rates. Accretion through the inner edge of disks subject to outburst is self-regulated through the thermal ionization instability such that long periods (approximately 1000 yrs) of low mass flux: (1-10) x 10(exp -8) Solar Mass/yr, are punctuated by short periods (approximately 100 yrs) of high mass flux: (1-10) x 10(exp -5) Solar Mass/yr. The unstable region of the disk extends radially only to a distance of approximately 1/4 AU. Beyond this region matter is transported stably at the infall rate. In systems for which M = 1 Solar Mass, with an inner disk edge of 3 Solar Radius, the critical rate for outbursts is 5 x 10(exp -7) Solar Mass/yr independent of the magnitude of the viscous alpha parameter consistent with estimates of boundary layer mass flux in T Tauri stars. We use timescales of observed outbursts to constrain the magnitude of the alpha parameter to be 10(exp -4) where hydrogen is neutral and 10(exp -3) where ionized. Light curves of V1515 Cyg, FU Ori, and V1057 Cyg are reproduced; the latter two require application of a small perturbation in surface density to produce observed rapid rise times. Detailed reply is made to objections to the accretion disk model for outbursts. Comparison to observations are made of time dependent spectral energy distributions, colors, and line-width velocity evolution.

Bell, K. R.↗
NASA NTRS2010

Insulation-Testing Cryostat With Lifting Mechanism

The figure depicts selected aspects of an apparatus for testing thermal-insulation materials for cryogenic systems at temperatures and under vacuum or atmospheric conditions representative of those encountered in use. This apparatus, called "Cryostat-100," is based on the established cryogen-boil-off calorimeter method, according to which the amount of heat that passes through an insulation specimen to a cryogenic fluid in a container, and thus the effective thermal conductance of the specimen, is taken to be proportional to the amount of the cryogenic fluid that boils off from the container. The design of Cryostat-100 is based partly on, and incorporates improvements over, the design of a similar prior apparatus called "Cryostat-1" described in "Improved Methods of Testing Cryogenic Insulation Materials" (KSC-12107 & KSC- 12108), NASA Tech Briefs, Vol. 24, No. 12 (December 2000), page 46. The design of Cryostat-100 also incorporates the best features of two other similar prior apparatuses called "Cryostat-2" (also described in the cited prior article) and "Cryostat- 4." Notable among the improvements in Cryostat-100 is the addition of a lifting mechanism that enables safe, rapid, reliable insertion and removal of insulation specimens and facilitates maintenance operations that involve lifting. As in Cryostat-1, the cold mass is a vertical stainless-steel cylindrical vessel subdivided into a larger measurement vessel with smaller thermal-guard vessels at both ends. During operation, all three vessels are kept filled with liquid nitrogen near saturation at ambient pressure (temperature .77.4 K). The cold mass of Cryostat-100 has a length of 1 m and diameter of 168 mm. Each specimen has a corresponding nominal length and inner diameter and a nominal thickness of 25.4 mm. Specimens that are shorter and have thicknesses between 0 and 50 mm are also acceptable. Bulk-fill, foam, clam-shell, multilayer insulation, and layered materials can be tested over a very wide range of thermal transmission: apparent thermal conductivity from 0.01 to 60 mW/m-K and heat flux from 0.1 to 500 W/sq m. A test in Cryostat-100 can be conducted at any desired gas pressure between ambient atmospheric pressure at one extreme and a vacuum with residual pressure <10(exp -5) torr (<1.33 10(exp -3) Pa) at the other extreme. The residual gas (and purge gas) is typically nitrogen, but can be any suitable purge gas (e.g., helium, argon, or carbon dioxide). Usually, the temperature on the warm boundary of the insulation specimen is maintained near the ambient value (approximately 293 K), while the boiling of liquid nitrogen at atmospheric pressure in the cold mass maintains the temperature on the cold boundary of the specimen at approximately 77 K.

Fesmire, James↗
NASA NTRS2007

Cryogenic Shrouds for Testing Thermal-Insulation Panels

Cryogenic shrouds have been designed and built for use in thermomechanical testing of samples of thermalinsulation panels on cryogenic vessels. In the original application for which these shrouds were specifically designed, the samples are representative of the large-area thermal-insulation panels on the space-shuttle external tanks that hold liquid hydrogen and liquid oxygen, and the purpose of the testing is to demonstrate the ability of bonded layers in the panels to resist delamination under a combination of applied uniaxial mechanical loads and realistic operational temperatures. Presumably, the shrouds and the tests performed by use of them could be modified to enable similar evaluation of thermomechanical properties of thermal-insulation panels for cryogenic vessels other than the external tanks of the space shuttles. The shrouds are required to enable maintenance of required temperatures on the inner and outer surfaces of the thermal-insulation-panel samples, to enable visual observation of the outer surfaces of the samples, and not to introduce any measurable loads into the panels. For each panel sample, there are two shrouds: one to be mounted on the inner surface (the surface that would be in contact with a tank containing a cryogenic liquid during normal use) and one to be mounted on the outer surface (the surface that would be exposed to ambient air or other warmer environment during normal use). The shrouds for testing specimens of thermal-insulation- panels for the liquid-hydrogen tank are made largely of titanium; the shrouds for testing specimens of thermal- insulation-panels for the liquid-oxygen tank are made largely of an aluminum- lithium alloy. The specific temperature requirements are the following: The inner shroud must make it possible to maintain a temperature of 321 degrees F (196 degrees C) [the approximate temperature of liquid nitrogen] or 453 F (about 269 C) [the approximate temperature of liquid helium] on the inner face of the sample. The outer shroud must make it possible to maintain a temperature between 30 degrees and 0 degrees F (between about 34 degrees and about 18 degrees C) on the outer surface of the sample by blowing a cryogenic gas or missile grade air along that surface. To enable viewing of the outer surface of the sample during testing, the outer shroud includes a window comprising two layers of poly(methyl methacrylate) with a gap between them to reduce fogging. To ensure that the shrouds do not introduce any measurable loads into a panel specimen, the shrouds are cushioned on the specimen by seals made of a fluoropolymer-membrane/fabric composite material and are held in place on the specimen by means of symmetrically placed clamps with poly(tetrafluoroethylene) pads. Instrumentation ports for thermocouples and strain gauges used in the tests are incorporated into the shrouds.

Norris, Jeffrey↗
NASA NTRS1991

Physical aging in comets

The question of physical aging in cometary nuclei is addressed in order to elucidate the relationship between the past conditions in the protosolar nebula and the present state of the cometary nucleus, and to understand the processes that will physically and chemically alter the nucleus as a function of time. Attention is given to some of the processes that might be responsible for causing aging in comets, namely, radiation damage in the upper layers of the nucleus during the long residences in the Oort cloud, processing from heating and collisions within the Oort cloud, loss of highly volatile species from the nucleus on the first passage through the inner solar system, buildup of a dusty mantle, which can eventually prohibit further sublimation, and a change in the porosity, and hence the thermal properties, of the nucleus. Recent observations suggest that there are distinct differences between 'fresh' Oort cloud comets and thermally processed periodic comets with respect to intrinsic brightness and rate of change of activity as a function of distance.

Meech, Karen J.↗
NASA NTRS1992

Microgravity experiments and numerical simulations of rotating convection in a hemispherical layer

Hart el al. (1986) has previously described Spacelab experiments on rotating convection in a hemispherical layer with a spherically symmetric body force. A body force is induced on the dielectric fluid (silicon oil) by applying an electrostatic potential across the gap. Various configurations of temperature forcings are applied on the inner and outer spherical boundaries, which along with the rotation rate and the strength of the body force define the external parameters for each experiment. The present paper will present a review of the past experimental results and some new results from a numerical model of previous and planned experiments.

Miller, Timothy L.↗
NASA NTRS1994

The FU Orionis Outburst as a Thermal Disk Accretion Event: Detailed Calculations and Comparison to Observations

FU Orionis outbursts are temporary large increases in luminosity: x (40 - 250) thought to occur repeatedly in all low mass young stellar systems. We discuss detailed calculations of viscous accretion disks suggesting that FU Ori events signify the existence of a protostellar disk transporting mass at a rate of (1 - 10) x 10(exp 6) solar mass / yr, in agreement with theoretical and observational estimates of molecular cloud core collapse rates. Accretion through the inner edge of disks subject to outburst is self-regulated through the thermal ionization instability such that long periods (approx. 1000 yrs) of low mass flux: (1 - 10) x 10(exp -5) solar mass / yr, are punctuated by short periods (approx. 100 yrs) of high mass flux: (1-10) x 10(exp -5) solar mass / yr. The unstable region of the disk extends radially only to a distance of approx. = 1/4 AU. Beyond this region matter is transported stably at the infall rate. In systems for which M(sum *) = 1 solar mass with an inner disk edge of 3 solar radius, the critical rate for outbursts is 5 x 10(exp -7) solar mass / yr independent of the magnitude of the viscous ce parameter consistent with estimates of boundary layer mass flux in T Tauri stars. We use timescales of observed outbursts to constrain the magnitude of the alpha parameter to be 10(exp -4) where hydrogen is neutral and 10(exp -3) where ionized. Light curves of V1515 Cyg, FU Ori, and V1057 Cya are reproduced; the latter two require application of a small perturbation in surface density to produce observed rapid rise times. Detailed reply is made to objections to the accretion disk model for outbursts. Comparison to observations are made of time dependent spectral energy distributions, colors, and line-width velocity evolution.

Bell, K. R.↗
NASA NTRS2008

Gravity Scaling of a Power Reactor Water Shield

Water based reactor shielding is being considered as an affordable option for use on initial lunar surface power systems. Heat dissipation in the shield from nuclear sources must be rejected by an auxiliary thermal hydraulic cooling system. The mechanism for transferring heat through the shield is natural convection between the core surface and an array of thermosyphon radiator elements. Natural convection in a 100 kWt lunar surface reactor shield design has been previously evaluated at lower power levels (Pearson, 2007). The current baseline assumes that 5.5 kW are dissipated in the water shield, the preponderance on the core surface, but with some volumetric heating in the naturally circulating water as well. This power is rejected by a radiator located above the shield with a surface temperature of 370 K. A similarity analysis on a water-based reactor shield is presented examining the effect of gravity on free convection between a radiation shield inner vessel and a radiation shield outer vessel boundaries. Two approaches established similarity: 1) direct scaling of Rayleigh number equates gravity-surface heat flux products, 2) temperature difference between the wall and thermal boundary layer held constant on Earth and the Moon. Nussult number for natural convection (laminar and turbulent) is assumed of form Nu = CRa(sup n). These combined results estimate similarity conditions under Earth and Lunar gravities. The influence of reduced gravity on the performance of thermosyphon heat pipes is also examined.

Reid, Robert S.↗
NASA NTRS2011

Space-Time Localization of Plasma Turbulence Using Multiple Spacecraft Radio Links

Space weather is described as the variability of solar wind plasma that can disturb satellites and systems and affect human space exploration. Accurate prediction requires information of the heliosphere inside the orbit of the Earth. However, for predictions using remote sensing, one needs not only plane-of-sky position but also range information the third spatial dimension to show the distance to the plasma disturbances and thus when they might propagate or co-rotate to create disturbances at the orbit of the Earth. Appropriately processed radio signals from spacecraft having communications lines-of-sight passing through the inner heliosphere can be used for this spacetime localization of plasma disturbances. The solar plasma has an electron density- and radio-wavelength-dependent index of refraction. An approximately monochromatic wave propagating through a thin layer of plasma turbulence causes a geometrical-optics phase shift proportional to the electron density at the point of passage, the radio wavelength, and the thickness of the layer. This phase shift is the same for a wave propagating either up or down through the layer at the point of passage. This attribute can be used for space-time localization of plasma irregularities. The transfer function of plasma irregularities to the observed time series depends on the Doppler tracking mode. When spacecraft observations are in the two-way mode (downlink radio signal phase-locked to an uplink radio transmission), plasma fluctuations have a two-pulse response in the Doppler. In the two-way mode, the Doppler time series y2(t) is the difference between the frequency of the downlink signal received and the frequency of a ground reference oscillator. A plasma blob localized at a distance x along the line of sight perturbs the phase on both the up and down link, giving rise to two events in the two-way tracking time series separated by a time lag depending the blob s distance from the Earth: T2-2x/c, where T2 is the two-way time-of-flight of radio waves to/from the spacecraft and c is the speed of light. In some tracking situations, more information is available. For example, with the 5-link Cassini radio system, the plasma contribution to the up and down links, y(sub up)(t) and y(sub dn)(t), can be computed separately. The times series y(sub up)(t) and y(sub dn)(t) respond to a localized plasma blob with one event in each time series. These events are also separated in time by T2-2x/c. By cross-correlating the up and down link Doppler time series, the time separation of the plasma events can be measured and hence the plasma blob s distance from the Earth determined. Since the plane-of-sky position is known, this technique allows localization of plasma events in time and three space dimensions.

Armstrong, John W.↗
NASA NTRSDate not supplied

The electron diffusion region and its relation to the larger-scale environment

The electron diffusion region forms the inner core of the magnetic reconnection machine. In this region, physical processes act to sustain a reconnection electric field, they accelerate to provide current density, and the heat to provide particle pressure in the current layer. The relative roles of these processes depend on whether the overall geometry is anti-parallel or asymmetric, and whether a guide field is present of not, but the overall concept applies in each case. The EDR is embedded in successively larger regions, starting with the ion diffusion region to even larger scales, where the plasma increasingly behaves like an anisotropic MHD plasma. With our new understanding of how the EDR works, it is of great interest to study how EDR processes couple to the larger scale environment. The ultimate efficacy of the magnetic reconnection is shaped by this interesting example of micro-macro coupling. In this presentation, we present some thoughts pertaining to this topic. In particular, we will discuss how information transport between scales is mediated, and how the very small scales can reach balance with the larger, overall system. We will review any pertinent research and present a set of questions inviting future research.

Michael Hesse↗
NASA NTRS1992

Modelling, simulation and sounding of cometary nuclei; Proceedings of the International Workshop, Cagliari, Italy, May 28-30, 1991

The present workshop on the modeling, simulation, and sounding of cometary nuclei discusses the Rosetta comet-nucleus sample return mission, the importance of comet models in the design of the Rosetta mission, the challenge of sample acquisition in a cometary environment, and a simulation of Rosetta on-comet operations. Attention is given to HST observations of the inner coma of Comet Levy 1990c, cometary coma particulate modeling for the Rosetta mission aphelion rendezvous, recent gas flux modeling and applications of cometary nuclei, and the 3D time-dependent modeling of comet nucleus surface layers. Topics addressed include models of cometary nuclei and future space mission, the composition of cometary materials, experiments with cometary analogs at the DLR, and crust formation in cometary analogs. Also considered are gaseous products from VUV photolysis of cometary solids, cosmic ray modification of organic cometary matter as simulated by cyclotron irradiation, and KOSI comet simulation experiments.

Source record↗
NASA NTRS1993

Lunar surface operations. Volume 1: Lunar surface emergency shelter

The lunar surface emergency shelter (LSES) is designed to provide survival-level accommodations for up to four astronauts for a maximum of five days. It would be used by astronauts who were caught out in the open during a large solar event. The habitable section consists of an aluminum pressure shell with an inner diameter of 6 ft. and a length of 12.2 ft. Access is through a 4 in. thick aluminum airlock door mounted at the rear of the shelter. Shielding is provided by a 14.9 in. thick layer of lunar regolith contained within a second, outer aluminum shell. This provides protection against a 200 MeV event, based on a 15 REM maximum dose. The shelter is self-contained with a maximum range of 1000 km. Power is supplied by a primary fuel cell which occupies 70.7 cu ft. of the interior volume. Mobility is achieved by towing the shelter behind existing lunar vehicles. It was assumed that a fully operational, independent lunar base was available to provide communication support and tools for set-up and maintenance. Transportation to the moon would be provided by the proposed heavy lift launch vehicle. Major design considerations for the LSES were safety, reliability, and minimal use of earth materials.

Shields, William↗
NASA NTRS1983

Plasma boundaries and shocks

Work conducted over the past four years on the plasma and magnetic field boundaries in the earth's magnetosphere and interplanetary space is reviewed. Studies of the structure and dynamics of bow shocks based largely on ISEE-1 and -2 measurments are discussed, together with intensive investigations of the particles and waves of the foreshock region, marked by various distributions of return ions reflected from the bow shock. Attention is briefly given to interplanetary shocks and the magnetosheath region, while research on the location, motion and structure and flux transfer events in the magnetopause and on the magnetospheric boundary layer is considered in detail. Evidence of reconnection in the magnetosphere is discussed, and studies of processes in the plasma sheet and neutral sheet in the magnetotail, the polar cusp and the injection of plasma into the inner magnetosphere are noted.

Russell, C. T.↗
NASA NTRS1991

Nucleic acid and protein synthesis during lateral root initiation in Marsilea quadrifolia (Marsileaceae)

The pattern of DNA, RNA, and protein synthesis during lateral root initiation in Marsilea quadrifolia L. was monitored by autoradiography of incorporated of 3H-thymidine, 3H-uridine, and 3H-leucine, respectively. DNA synthesis was associated with the enlargement of the lateral root initial prior to its division. Consistent with histological studies, derivatives of the lateral root initial as well as the cells of the adjacent inner cortex and pericycle of the parent root also continued to synthesize DNA. RNA and protein synthetic activities were found to be higher in the lateral root initials than in the endodermal initials of the same longitudinal layer. The data suggest a role for nucleic acid and protein synthesis during cytodifferentiation of a potential endodermal cell into a lateral root initial.

Non-NASA Center↗