Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “impact monitoring”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

The Orbital Drift Impact on the Monthly Regional TOA Flux Assuming Constant Meteorology

The NASA Clouds and the Earth's Radiant Energy System (CERES) gridded Single Scanner Footprint (SSF1deg) product provides TOA SW and LW monthly 1° regional all-sky fluxes, which are used to monitor the Earth’s energy balance. The CERES long-term climate data record relies on Terra and Aqua satellite sun-synchronous orbits that are maintained at 10:30 and 1:30 local equator crossing times (LECT), respectively. The Terra and Aqua satellites are expected to drift outside of their respective LECT during mid 2022. Both Terra and Aqua will drift over several years towards sunrise and sunset, respectively, and eventually will be deorbited. The CERES SSF1deg product monthly regional fluxes are based on the well calibrated and stable CERES observed fluxes and are temporally interpolated assuming constant meteorology between measurements to resolve the regional diurnal flux cycle to obtain a daily averaged flux. The drifting orbits may impact the monthly regional TOA flux over regions with systematic diurnal cycles, because the observations will shift in local time. The CERES project would like to determine the maximum Terra and Aqua LECT time shift before the monthly regional fluxes are diurnally impacted and become unreliable for long-term climate monitoring. To determine the impact of the drifting orbits on the SSF1deg monthly regional fluxes,15-minute Geostationary Earth Radiation Budget (GERB) broadband observed fluxes over the Meteosat geostationary satellite domain (±60° in longitude and latitude) are used as proxy CERES observations. The drifting orbit sampling pattern is achieved by simply incrementing the observation time by steps of 15 minutes from the CERES footprint time. For each 15-minute time interval, the CERES observed fluxes are replaced by the GERB observed fluxes. The-15 minute incremented monthly regional fluxes based on constant meteorology are compared to the reference 10:30 and 1:30 LECT fluxes. Regions with systematic diurnal cycles, include morning maritime stratus, where the clouds dissipate during the morning, and land afternoon convection, where clouds increase in the afternoon will impact the regional flux differences. Based on January and July 2010 GERB data, even a 15-minute LECT change caused regional monthly flux differences that would impact long term regional trend analysis. Results will be shown at the conference.

D R Doelling↗
DOE OSTI2025

Boiler Health Monitoring Using a Hybrid First Principles-Artificial Intelligence Model

Due to increased penetration of the intermittent renewables to the grid, pulverized coal (PC) plants are being forced to cycle their load frequently and rapidly, operate at low load condition for sustained period, and start up and shut down several hundred times in a year in the worst case. These severe operations are causing substantial damage to the boiler components compromising the reliability of PC plants. An online health monitoring tool can be instrumental in understanding the impacts of load-following and can eventually help PC plants to develop advanced process control strategies for improved flexibility without compromising safety nor reliability.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2021

Cost Efficiency of Environmental DNA as Compared to Conventional Methods for Biodiversity Monitoring Purposes at Marine Energy Sites

The installation of marine energy systems may affect marine environments, and by extension, marine fish communities. Therefore, biomonitoring is an integral part of assessing impacts on species. Environmental DNA (eDNA) provides a noninvasive alternative to conventional monitoring surveys and the possibility of a more accurate assessment of species richness. Yet, its cost efficiency compared to traditional methods of monitoring is relatively unknown, especially when applied to monitoring around tidal, wave, and offshore wind energy installations. For this study, 202 peer-reviewed journal articles were dissected to inventory the diversity of supplies used for collecting and processing eDNA samples and to compile the average cost of eDNA surveys. Information collected included the type, volume, and brand of containers used in sampling; material, size, and brand of filters; and extraction methods. Cost information was gathered for the most common supplies, and a total cost was estimated for a hypothetical eDNA survey in Sequim Bay, WA, to compare with traditional methods of surveying such as beach seining and scuba surveys. The results showed a higher-than-expected diversity of supplies to collect and process eDNA samples. The most common supplies were 1 L Nalgene bottles at an average cost of 7.96 USD for collecting samples, 0.45 µm glass fiber Merck Millipore filters at an average cost of 1.51 USD for filtering samples, and the Qiagen DNeasy Blood and Tissue kit at 3.54 USD per sample for extracting DNA. When compared to beach seine and scuba surveys, eDNA surveys undertaken by senior researchers are less expensive for both initial surveys with all new materials as well as for follow-up surveys reusing some of the supplies. However, when surveys are done solely by students, eDNA surveys are more expensive than scuba surveys when no prior supplies are available and more than both beach seine and scuba surveys for follow-up surveys reusing supplies. In a professional sphere, where surveys are less often conducted by teams of students only, eDNA surveys are an effective and less-costly alternative to conventional methods. We anticipate that the development and refinement of eDNA methodology will continue to decrease surveying costs.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
NASA NTRS1977

LACIE: A look to the future

The Large Area Crop Inventory Experiment (LACIE) is a project designed to demonstrate the applicability of remote sensing technology to monitor globally an important world food crop - wheat. The need for more timely and reliable monitoring of food and fiber supplies is discussed, and the monitoring systems currently utilized are reviewed. The fundamentals involved in assessing the impact of variable weather and economic conditions on wheat acreage, yield, and production are elucidated. The experiment's approach to production monitoring is described, and its status is reviewed. Examples of acreage and yield monitoring in the Soviet Union are used to illustrate the experiment's approach.

Macdonald, R. B.↗
DOE OSTI2020

NVBL (National Virtual Biotechnology Laboratory): Pandemic Monitoring and Modeling

This virtual symposium was held to highlight the impact the U.S. Department of Energy’s (DOE) National Virtual Biotechnology Laboratory (NVBL) has had utilizing the unique capabilities of the DOE to tackle the science and technology challenges associated with COVID-19, and to discuss areas in which the NVBL can have impact in the future. With perspectives from Chris Fall, Director, Office of Science, DOE, and William A. Bookless, Principal Deputy Administrator of the National Nuclear Security Administration, the event featured Presentations from lead investigators reporting progress in: Epidemiological modeling, Therapeutics, Testing, Understanding transport of the virus, and Solving issues around supply chain challenges. In addition, keynote speakers from outside the NVBL discussed the upcoming science and technology needs in computing, testing and surveillance, and vaccines. The event was aimed at the S&T community, media, and general public.

Bhaduri, Budhu↗
NASA NTRSDate not supplied

The Impact of Drifting Orbits on the Monthly Regional TOA Flux Assuming Constant Meteorology

The NASA Clouds and the Earth's Radiant Energy System (CERES) gridded Single Scanner Footprint (SSF1deg) product provides TOA SW and LW monthly 1° regional all-sky fluxes, which are used to monitor the Earth’s energy balance. The CERES long-term climate data record relies on Terra and Aqua satellite sun-synchronous orbits that are maintained at 10:30 and 1:30 local equator crossing times (LECT), respectively. The Terra and Aqua satellites are expected to drift outside of their respective LECT during mid 2022. Both Terra and Aqua will drift over several years towards sunrise and sunset, respectively, and eventually will be deorbited. The CERES SSF1deg product monthly regional fluxes are based on the well calibrated and stable CERES observed fluxes and are temporally interpolated assuming constant meteorology between measurements to resolve the regional diurnal flux cycle to obtain a daily averaged flux. The drifting orbits may impact the monthly regional TOA flux over regions with systematic diurnal cycles, because the observations will shift in local time. The CERES project would like to determine the maximum Terra and Aqua LECT time shift before the monthly regional fluxes are diurnally impacted and become unreliable for long-term climate monitoring. To determine the impact of the drifting orbits on the SSF1deg monthly regional fluxes,15-minute Geostationary Earth Radiation Budget (GERB) broadband observed fluxes over the Meteosat geostationary satellite domain (±60° in longitude and latitude) are used as proxy CERES observations. The drifting orbit sampling pattern is achieved by simply incrementing the observation time by steps of 15 minutes from the CERES footprint time. For each 15-minute time interval, the CERES observed fluxes are replaced by the GERB observed fluxes. The-15 minute incremented monthly regional fluxes based on constant meteorology are compared to the reference 10:30 and 1:30 LECT fluxes. Regions with systematic diurnal cycles, include morning maritime stratus, where the clouds dissipate during the morning, and land afternoon convection, where clouds increase in the afternoon will impact the regional flux differences. Based on January and July 2010 GERB data, even a 15-minute LECT change caused regional monthly flux differences that would impact long term regional trend analysis. Results will be shown at the conference.

David Doelling↗
NASA NTRS2013

State of the Art in Large-Scale Soil Moisture Monitoring

Soil moisture is an essential climate variable influencing land atmosphere interactions, an essential hydrologic variable impacting rainfall runoff processes, an essential ecological variable regulating net ecosystem exchange, and an essential agricultural variable constraining food security. Large-scale soil moisture monitoring has advanced in recent years creating opportunities to transform scientific understanding of soil moisture and related processes. These advances are being driven by researchers from a broad range of disciplines, but this complicates collaboration and communication. For some applications, the science required to utilize large-scale soil moisture data is poorly developed. In this review, we describe the state of the art in large-scale soil moisture monitoring and identify some critical needs for research to optimize the use of increasingly available soil moisture data. We review representative examples of 1) emerging in situ and proximal sensing techniques, 2) dedicated soil moisture remote sensing missions, 3) soil moisture monitoring networks, and 4) applications of large-scale soil moisture measurements. Significant near-term progress seems possible in the use of large-scale soil moisture data for drought monitoring. Assimilation of soil moisture data for meteorological or hydrologic forecasting also shows promise, but significant challenges related to model structures and model errors remain. Little progress has been made yet in the use of large-scale soil moisture observations within the context of ecological or agricultural modeling. Opportunities abound to advance the science and practice of large-scale soil moisture monitoring for the sake of improved Earth system monitoring, modeling, and forecasting.

Review↗
NASA NTRS2012

Towards Reliable Evaluation of Anomaly-Based Intrusion Detection Performance

This report describes the results of research into the effects of environment-induced noise on the evaluation process for anomaly detectors in the cyber security domain. This research was conducted during a 10-week summer internship program from the 19th of August, 2012 to the 23rd of August, 2012 at the Jet Propulsion Laboratory in Pasadena, California. The research performed lies within the larger context of the Los Angeles Department of Water and Power (LADWP) Smart Grid cyber security project, a Department of Energy (DoE) funded effort involving the Jet Propulsion Laboratory, California Institute of Technology and the University of Southern California/ Information Sciences Institute. The results of the present effort constitute an important contribution towards building more rigorous evaluation paradigms for anomaly-based intrusion detectors in complex cyber physical systems such as the Smart Grid. Anomaly detection is a key strategy for cyber intrusion detection and operates by identifying deviations from profiles of nominal behavior and are thus conceptually appealing for detecting "novel" attacks. Evaluating the performance of such a detector requires assessing: (a) how well it captures the model of nominal behavior, and (b) how well it detects attacks (deviations from normality). Current evaluation methods produce results that give insufficient insight into the operation of a detector, inevitably resulting in a significantly poor characterization of a detectors performance. In this work, we first describe a preliminary taxonomy of key evaluation constructs that are necessary for establishing rigor in the evaluation regime of an anomaly detector. We then focus on clarifying the impact of the operational environment on the manifestation of attacks in monitored data. We show how dynamic and evolving environments can introduce high variability into the data stream perturbing detector performance. Prior research has focused on understanding the impact of this variability in training data for anomaly detectors, but has ignored variability in the attack signal that will necessarily affect the evaluation results for such detectors. We posit that current evaluation strategies implicitly assume that attacks always manifest in a stable manner; we show that this assumption is wrong. We describe a simple experiment to demonstrate the effects of environmental noise on the manifestation of attacks in data and introduce the notion of attack manifestation stability. Finally, we argue that conclusions about detector performance will be unreliable and incomplete if the stability of attack manifestation is not accounted for in the evaluation strategy.

cyber defense↗
DOE OSTI2024

Methane Integrated Monitoring and Measurement System Design

Methane (CH 4 ), an abundant greenhouse gas, is the second largest contributor to global warming after carbon dioxide (CO 2 ). In comparison to CO 2 , CH 4 has a larger warming effect over a much shorter lifetime. While technologies to radically reduce global carbon dioxide emissions are materializing, rapid reductions in methane emissions are needed to limit near-term warming. Methane is primarily emitted as a byproduct from agricultural activities and energy extraction/utilization and is currently monitored via bottom-up (i.e., activity level) or top-down (via airborne or satellite retrievals) approaches. However, significant methane leaks remain undetected, and emission rates are challenging to characterize with current monitoring frameworks. In this report, we study methane leaks from oil and gas infrastructure using a tiered monitoring approach that combines bottom-up and top-down approaches in an integrated framework. We describe the individual advantages of bottom-up and top-down sensors in both stationary and mobile settings before characterizing how a fully integrated framework can improve predictions and uncertainties of potential leak locations and their emission rates. Further, we study the impact of different atmospheric (wind) conditions on integrated methane monitoring and develop a probabilistic approach to optimal sensor placement, thereby shortening detection times and improving monitoring capabilities. Last, we discuss how biogenic flux modeling can be used to improve assessment of background methane concentrations needed to fully assess the sensitivity of a tiered monitoring system.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1973

A land use and environmental impact analysis of the Norfolk-Portsmouth SMSA

The feasibility of using remote sensing techniques for land use and environmental assessment in the Norfolk-Portsmouth area is discussed. Data cover the use of high altitude aircraft and satellite remote sensing data for: (1) identifying various heirarchial levels of land use, (2) monitoring land use changes for repetitive basis, (3) assessing the impact of competing land uses, and (4) identifying areas of potential environmental deterioration. High altitude aircraft photographs (scale 1:120,000) acquired in 1959, 1970, and 1972, plus Earth Resources Technology Satellite (ERTS-1) color composite images acquired in 1972 were used for the land use and environmental assessments. The high altitude aircraft photography, as expected, was successfully used to map Level 1, Level 2, as well as some urban Level 3 land use categories. However, the detail of land use analysis obtainable from the ERTS imagery exceeded the expectations for the U.S. Geological Survey's land use classification scheme. Study results are consistent with the initial investigation which determined Level 1 land use change to be 16.7 square km per year.

Mitchel, W. B.↗
DOE OSTI2022

Simulation study of chemo-mechanical impacts of CO 2 injection in morrow b sandstone reservoir

Here, this study investigates the impacts of geomechanical and geochemical changes on carbon storage in a partially depleted oil reservoir, using results from four different coupled simulation models. Models were used to examine the relative importance of storage mechanisms, and how changing reservoir parameters might affect these mechanisms through time. The study uses data from a Morrowan sandstone reservoir in the Farnsworth Unit (FWU), Ochiltree County, Texas which is currently undergoing CO 2 enhanced oil recovery (EOR). Partially depleted oil reservoirs such as the FWU offer attractive carbon utilization and/or storage targets because of existing infrastructure and economic benefits from incremental oil recovery as well as tax credits. However, prediction of storage capacity or long-term fluid migration in these fields can be difficult because of the wide variation in formation fluids and operational histories that may have undergone. CO 2 injection can cause complex geomechanical and geochemical responses in a reservoir as a result of interplay between dynamic changes in pore pressure, reservoir temperature, fluid composition, and interactions between formation fluids, CO 2 , and reservoir rock. Thus, multiple coupled numerical simulation models must be developed and used to more precisely understand what CO 2 storage mechanisms are most significant, as well as the long-term fate of the stored CO 2 . Our study used results from hydrodynamic, coupled hydro-geomechanical, coupled hydro-geochemical, and coupled hydro-geomechanical-geochemical models to examine how changes in geomechanical and geochemical properties can impact the injectivity or storage capacity of CO 2 . Models simulated historical field operations and then forward-modeled a water-alternate-gas (WAG) operation for 20 years, followed by a 1000-year post-injection monitoring. The work demonstrates that in this specific reservoir, geomechanical impacts appear to be more significant than any geochemical processes, which showed minimal impact on reservoir properties. Furthermore, these simulation scenarios corroborated other studies showing more than 90% of CO 2 injected are being stored and will remain stored in the reservoir. The study was able to draw on a rich set of data from this currently operational project for the work. Because the Morrow is a widespread oil-bearing reservoir in the midcontinent of the United States and is fairly typical of many sandstone reservoirs elsewhere, the study has significance beyond the boundaries of our field area.

58 GEOSCIENCES↗
DOE OSTI2026

A Field Guide to Corralling the Chaos: A Conceptual Framework for Using Models to Guide Opportunistic Field Studies of Natural Disturbances

Watersheds regulate biogeochemical processes and provide ecosystem services to human societies, but disturbances can fundamentally alter these processes across space and time. Determining when and where to sample to capture disturbance impacts in watersheds remains a central challenge. Manipulation studies and long-term monitoring are often constrained by scope, and opportunistic studies often lack pre-disturbance data needed to statistically determine disturbance impacts. We identify a persistent knowledge gap: the absence of a clear, transferable framework to guide opportunistic disturbance research where pre-disturbance data collection is not a feasible option. To address this gap, we present a conceptual framework that intentionally integrates modeling and empirical observation in an iterative, stepwise model–experiment workflow. We demonstrate its application through two contrasting case studies: wildfire impacts on headwater streams using a pre-disturbance preparedness approach, and saltwater flooding impacts on coastal forests using an ‘ex-post-facto’ approach. From these applications, we assess strengths, limitations, and the critical role of team science for transferability across disturbance types and study designs. Broadly, this framework offers a scalable path towards more rigorous, timely, and actionable disturbance science that can inform watershed management, hazard risk reduction, and ecosystem resilience.

Coastal Biogeochemistry↗
DOE OSTI2023

Assessment of Baseline Monitoring Data for the Remote-Handled Low-Level Waste Disposal Facility at Idaho National Laboratory

The purpose of this document is to summarize environmental monitoring data collected at the Remote-Handled Low-Level Waste (RHLLW) Disposal Facility during the first four years of facility operations (FY 2019 through FY 2022). This summary provides a “baseline” condition for the facility, which can be used to distinguish contaminant releases from the RHLLW Disposal Facility from pre existing contamination as well as potential future releases from other sources (i.e., upgradient aquifer sources), as specified in the facility monitoring plan. Sufficient data has been collected over the first four years of operation of the RHLLW Disposal Facility to establish baseline conditions for future compliance monitoring of aquifer wells and performance monitoring of vadose zone lysimeters. Except for seven elevated tritium measurements from lysimeter HFEF-South believed to have been impacted by waste disposals, all data was deemed appropriate for establishing baseline concentrations. Monitoring of the aquifer detected indicator analytes gross alpha and gross beta and target analytes tritium and C-14. There were a few C-14 detections prior to an increase in the required detection level (RDL) after the first round of sampling. I-129 and Tc-99 were not detected above RDLs in aquifer samples. Lysimeter samples detected indicator analytes gross alpha and gross beta and target analyte tritium. Target analytes C-14, I-129, and Tc-99 were not detected above RDLs in lysimeter samples. Except for tritium, baseline concentrations of indicator and target analytes measured during the first four years of RHLLW facility operations are expected to represent conditions through the expected 20 year operating period of the facility. Elevated tritium in the aquifer, a result of past discharges of tritium at upgradient facilities, showed a decline over the first four years of operations, and levels are expected to continue to decline with time as a result of dilution and decay. Current tritium levels in lysimeter samples may be elevated due to tritium in the water applied during construction and infiltration testing of the facility. As a result, tritium concentrations in lysimeters may decline with time as a result of dilution and decay. Statistical measures (i.e., mean, standard deviation, and 99% upper confidence level [UCL]) were calculated for all detected analytes using the four years of concentration data. These measures will be used to evaluate future monitoring results and to demonstrate the facility is performing, or not performing, as established in the facility performance assessment (PA). Future monitoring results will also be combined with the baseline data in this report to further establish temporal trends and natural variability in the measurements. Based on the data collected during the baseline period, it is recommended the gross alpha action level for performance monitoring increase from 10 to 20 pCi/L due to several baseline measurements exceeding the preliminary action level of 10. An action level of 20 pCi/L is slightly greater than the 99% UCL, is protective of the aquifer, and would reduce unnecessary sampling. It is also recommended that tritium be added to the lysimeter analyte list for post-baseline period monitoring. Tritium, while not a dose concern, is a good tracer that can provide valuable information on water flow in and around the RHLLW Disposal Facility. Recommendations for a tritium action level are provided if considered necessary.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2021

Security assessment and impact analysis of cyberattacks in integrated T&D power systems

In this paper, we examine the impact of cyberattacks in an integrated transmission and distribution (T&D) power grid model with distributed energy resource (DER) integration. We adopt the OCTAVE Allegro methodology to identify critical system assets, enumerate potential threats, analyze and prioritize risks for threat scenarios. Based on the analysis, attack strategies and exploitation scenarios are identified which could lead to system compromise. Specifically, we investigate the impact of data integrity attacks in inverted-based solar PV controllers, control signal blocking attacks in protective switches and breakers, and coordinated monitoring and switching time-delay attacks. Index Terms—Cyberattacks, security assessment, impact analysis, case studies, integrated power systems.

14 SOLAR ENERGY↗
NASA NTRS2007

Solutions Network Formulation Report. Visible/Infrared Imager/Radiometer Suite and Advanced Microwave Scanning Radiometer Data Products for National Drought Monitor Decision Support

Drought effects are either direct or indirect depending on location, population, and regional economic vitality. Common direct effects of drought are reduced crop, rangeland, and forest productivity; increased fire hazard; reduced water levels; increased livestock and wildlife mortality rates; and damage to wildlife and fish habitat. Indirect impacts follow on the heels of direct impacts. For example, a reduction in crop, rangeland, and forest productivity may result in reduced income for farmers and agribusiness, increased prices for food and timber, unemployment, reduced tax revenues, increased crime, foreclosures on bank loans to farmers and businesses, migration, and disaster relief programs. In the United States alone, drought is estimated to result in annual losses of between $6 - 8 billion. Recent sustained drought in the United States has made decision-makers aware of the impacts of climate change on society and environment. The eight major droughts that occurred in the United States between 1980 and 1999 accounted for the largest percentage of weather-related monetary losses. Monitoring drought and its impact that occurs at a variety of scales is an important government activity -- not only nationally but internationally as well. The NDMC (National Drought Mitigation Center) and the USDA (U.S. Department of Agriculture) RMA (Risk Management Agency) have partnered together to develop a DM-DSS (Drought Monitoring Decision Support System). This monitoring system will be an interactive portal that will provide users the ability to visualize and assess drought at all levels. This candidate solution incorporates atmospherically corrected VIIRS data products, such as NDVI (Normalized Difference Vegetation Index) and Ocean SST (sea surface temperature), and AMSR-E soil moisture data products into two NDMC vegetation indices -- VegDRI (Vegetation Drought Response Index) and VegOUT (Vegetation Outlook) -- which are then input into the DM-DSS.

Estep, Leland↗
DOE OSTI2025

Subsurface heatwaves in lakes

Abstract Lake heatwaves (extreme hot water events) can substantially disrupt aquatic ecosystems. Although surface heatwaves are well studied, their vertical structures within lakes remain largely unexplored. Here we analyse the characteristics of subsurface lake heatwaves (extreme hot events occurring below the surface) using a spatiotemporal modelling framework. Our findings reveal that subsurface heatwaves are frequent, often longer lasting but less intense than surface events. Deep-water heatwaves (bottom heatwaves) have increased in frequency (7.2 days decade −1 ), duration (2.1 days decade −1 ) and intensity (0.2 °C days decade −1 ) over the past 40 years. Moreover, vertically compounding heatwaves, where extreme heat occurs simultaneously at the surface and bottom, have risen by 3.3 days decade −1 . By the end of the century, changes in heatwave patterns, particularly under high emissions, are projected to intensify. These findings highlight the need for subsurface monitoring to fully understand and predict the ecological impacts of lake heatwaves.

Environmental Sciences & Ecology↗