SEARCH · Engineering Papers

Results for “hyperbolic”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

All sources NASA NTRS DOE OSTI

NASA NTRS1977

Supercritical cascade design

The use of the method of complex extension to achieve better aerodynamic designs for supercritical cascades applicable to transonic turbomachinery is discussed. The method permits the computation of analytical solutions to elliptic, hyperbolic or mixed second-order partial equations in two dimensions. Boundary value problems formulated to develop an airfoil shape having a prescribed speed distribution for subsonic flow and a nearby speed distribution in the transonic case are also considered. Computing times necessary to run the blade design program are described as acceptably short.

Korn, D. G.↗

NASA NTRS1977

A balanced diagnostic system compatible with a barotropic prognostic model

A system of diagnostic equations for the velocity field, or wind laws, for a barotropic primitive-equation model of large-scale atmospheric flow is derived. Attention is given to the classical balance equation and its ellipticity condition. Numerical solutions of the diagnostic system are presented, including examples of cases of the mixed elliptic-hyperbolic type and cases with non-zero divergence. Procedures for implementing such a system are outlined, along with a review of factors in using the technique for operational numerical weather prediction.

Ghil, M.↗

NASA NTRS1977

An upper limit for the flux of interstellar dust grains in the solar system

Data from the LEAM (Lunar Ejecta and Meteorite experiment, a micrometeorite detector at the Apollo 17 landing site) have been examined for evidence of interstellar (IS) dust grains traversing the solar system. The analysis technique considers IS grains approaching the solar system from the local solar apex. A model calculates the grains' hyperbolic orbits into the solar system and predicts the impact directions on the moon. The observations are then compared with the predicted impact directions to measure the IS dust flux. No evidence has been found (at the 97.5% confidence level) for a flux greater than about 6 hundred-thousandths per sq m/sec for particles of at least 2 by 10 to the -14th power g.

Tomandl, D. A.↗

NASA NTRS1977

Initial energy and perihelion distributions of Oort-cloud comets

A Monte Carlo model of stellar perturbations of the Oort cloud is used to study the distributions in energy and perihelion of comets entering the planetary region for the first time. The model is run for a variety of initial states and a range of velocity perturbations. In all cases the resulting orbits are uniformly distributed in perihelion distance in the planetary region, q less than 20 AU. Most orbits are confined to a fairly narrow range in 1/a and hyperbolic orbits are rare.

Weissman, P. R.↗

NASA NTRS1978

Halley comet rendezvous with a SEPS vehicle

An analysis of the performance of a Solar Electric Propulsion System (SEPS) vehicle rendezvousing with Halley's comet just prior to its Frebruary 1986 perihelion is described. A calculus of variations mathematical formulation is used to maximize Halley arrival mass while giving effect to the influence of solar array size, launch date, arrival date, and insertion hyperbolic excess velocity. Numerical sensitivity relief, thrust system modeling, trajectory characteristics and ion engine operating conditions are discussed and illustrated. Results indicate a rendezvous is feasible with a minimal advance in solar cell and ion engine technology.

Burrows, R. R.↗

NASA NTRS1978

On acceleration of MacCormack's scheme

An acceleration of MacCormack's scheme due to Desideri and Tannehill is analyzed. It is found that for hyperbolic problems one cannot improve upon the efficiency of MacCormack's method. For parabolic problems the time step can be chosen arbitrarily large without loss of stability by an appropriate choice of the acceleration parameters. When applied to the heat equation this method is equivalent to both the Dufort-Frankel scheme and to MSOR.

Gottlieb, D.↗

NASA NTRS1978

Extrapolation methods for dynamic partial differential equations

Several extrapolation procedures are presented for increasing the order of accuracy in time for evolutionary partial differential equations. These formulas are based on finite difference schemes in both the spatial and temporal directions. On practical grounds the methods are restricted to schemes that are fourth order in time and either second, fourth or sixth order in space. For hyperbolic problems the second order in space methods are not useful while the fourth order methods offer no advantage over the Kreiss-Oliger method unless very fine meshes are used. Advantages are first achieved using sixth order methods in space coupled with fourth order accuracy in time. Computational results are presented confirming the analytic discussions.

Turkel, E.↗

NASA NTRS1978

On least squares approximations to indefinite problems of the mixed type

A least squares method is presented for computing approximate solutions of indefinite partial differential equations of the mixed type such as those that arise in connection with transonic flutter analysis. The method retains the advantages of finite difference schemes namely simplicity and sparsity of the resulting matrix system. However, it offers some great advantages over finite difference schemes. First, the method is insensitive to the value of the forcing frequency, i.e., the resulting matrix system is always symmetric and positive definite. As a result, iterative methods may be successfully employed to solve the matrix system, thus taking full advantage of the sparsity. Furthermore, the method is insensitive to the type of the partial differential equation, i.e., the computational algorithm is the same in elliptic and hyperbolic regions. In this work the method is formulated and numerical results for model problems are presented. Some theoretical aspects of least squares approximations are also discussed.

Fix, G. J.↗

NASA NTRS1978

The artificial compression method for computation of shocks and contact discontinuities. III - Self-adjusting hybrid schemes

This paper presents a new computational method for the calculation of discontinuous solutions of hyperbolic systems of conservation laws, which deal effectively with both shock and contact discontinuities. The method consists of two stages: in the first stage a standard finite-difference scheme is hybridized with a nonoscillatory first order accurate method to provide for the monotonic variation of the solution near discontinuities, and in the second stage artificial compression is applied to sharpen transitions at discontinuities. This modification of a standard finite-difference method results in a scheme which preserves the order of truncation error of the original method and yet yields a sharp and oscillation free transition for both shocks and contact discontinuities. The modification can be easily implemented in existing computer codes.

Harten, A.↗

NASA NTRS1978

A model for close encounters in the planetary problem

A model is proposed for single close encounters between two small masses, m1 and m2, which orbit a much larger mass, M. The main new feature of the model is the assumption of conic motion of the center of mass of m1 and m2 in the gravitational field of M. Comparisons of the model with the three-body equations of motion indicate that the model is a useful approximation for m1, m2 not exceeding 0.00001 M. The model is therefore applicable for encounters between bodies of the order of an earth mass or smaller in the presence of the sun. Comparisons are also made of outcomes obtained by the model with outcomes of numerical integration for a large variety of close encounters. The above comparisons reveal that for many purposes the model is an adequate approximation for encounters with an eccentricity of the hyperbolic orbit of m1 about m2 not less than 4.

Cox, L. P.↗

NASA NTRS1978

Optimum receiver structures for phase-multiplexed modulations

A MAP (maximum a posteriori) estimation loop is derived for a QPSK signal and, by suitable approximation to the nonlinearity which arises as a consequence of the MAP theory, is reconfigured with practical realizations that are valid for high and low SNRs. In particular, it is shown that by approximating the hyperbolic tangent nonlinearity in the MAP estimation loop by the first two terms in its power series, an interesting practical realization of this loop results which applies at low SNRs. The error signal in this loop is formed by multiplying the error signal and lock detector output signal of a conventional biphase Costas loop. A generalized linear in-phase channel configuration is proposed which allows carrier reconstruction from an unbalanced QPSK signal at all ratios of data rates and powers in the two channels, even in the limit as these ratios simultaneously approach unity, i.e., balanced quadriphase.

Simon, M. K.↗

NASA NTRS1977

Numerical calculations of the cross-section for the accretional capture of the moon by the earth

If a primary body is increasing in mass the hyperbolic orbit of a secondary body can become an elliptic orbit. In order to determine the cross-section for the accretional capture of the moon by the earth, a series of numerical calculations has been carried out. Calculations have been carried out for various orbital ellipticities and separations and for various accretion rates. Accretional capture is favored if significant accretion occurs in a period of less than 100 yr. A window for accretional capture occurs if the minimum initial separation of the earth and moon (in astronomical units) is nearly equal to the initial heliocentric lunar eccentricity.

Nordmann, J. C.↗

NASA NTRS1978

Extension of Gauss' method for the solution of Kepler's equation

Gauss' method for solving Kepler's equation is extended to arbitrary epochs and orbital eccentricities. Although originally developed for near parabolic orbits in the vicinity of pericenter, a generalization of the method leads to a highly efficient algorithm which compares favorably to other methods in current use. A key virtue of the technique is that convergence is obtained by a method of successive substitutions with an initial approximation that is independent of the orbital parameters. The equations of the algorithm are universal, i.e., independent of the nature of the orbit whether elliptic, hyperbolic, parabolic or rectilinear.

Battin, R. H.↗

NASA NTRS1978

An extension of A-stability to alternating direction implicit methods

An alternating direction implicit (ADI) scheme was constructed by the method of approximate factorization. An A-stable linear multistep method (LMM) was used to integrate a model two-dimensional hyperbolic-parabolic partial differential equation. Sufficient conditions for the A-stability of the LMM were determined by applying the theory of positive real functions to reduce the stability analysis of the partial differential equations to a simple algebraic test. A linear test equation for partial differential equations is defined and then used to analyze the stability of approximate factorization schemes. An ADI method for the three-dimensional heat equation is also presented.

Warming, R. F.↗

NASA NTRS1978

Anastigmatic three-mirror telescope

A three-mirror telescope for extraterrestrial observations is described. An ellipsoidal primary mirror, a hyperbolic secondary mirror, and an ellipsoidal tertiary mirror, produce an image in a conveniently located finite plane for viewing.

Korsch, D. G.↗

NASA NTRS1979

A theoretical investigation of forebody shapes designed for natural laminar boundary-layer flow

The design of forebody shapes for natural laminar flow is discussed. For subsonic flow, computed results for three shapes of different fineness ratios indicate that laminar flow can be attained under conditions that approximate those on the forebody of a cruise missile flying at a low altitude at a high subsonic Mach number. For supersonic (Mach 2.00) design, a one-parameter family of hyperbolic arcs was used to generate forebody shapes having a favorable pressure gradient over the forebody length. Computed results for these shapes indicated laminar and transitional flow over the range of Reynolds numbers considered.

Barger, R. L.↗

NASA NTRS1979

Recent developments in finite element analysis for transonic airfoils

The prediction of aerodynamic forces in the transonic regime generally requires a flow field calculation to solve the governing non-linear mixed elliptic-hyperbolic partial differential equations. Finite difference techniques were developed to the point that design and analysis application are routine, and continual improvements are being made by various research groups. The principal limitation in extending finite difference methods to complex three-dimensional geometries is the construction of a suitable mesh system. Finite element techniques are attractive since their application to other problems have permitted irregular mesh elements to be employed. The purpose of this paper is to review the recent developments in the application of finite element methods to transonic flow problems and to report some recent results.

Hafez, M. M.↗

NASA NTRS1977

An accuracy analysis of the LDAR system

An accuracy report of the Lightning Detection and Ranging System is presented. The effect of quantizing errors are modelled by use of a computer. The errors in the four configurations of the LDAR System are compared to the limiting errors in an ideal hyperbolic system. Performance data from the track of a jet plane and for the indicated position of a fixed lightning simulator are analyzed for dispersions in the data. Error models show the quality and the areas of highly accurate data, and show how the data deteriorates outside the primary measuring range.

Poehler, H. A.↗