Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “green technology”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Ionomer Optimization for Water Uptake and Swelling in Anion Exchange Membrane Electrolyzer: Hydrogen Evolution Electrode

Green hydrogen produced through anion exchange membrane water electrolysis is a promising, low-cost chemical storage solution for intermittent renewable energy sources. Low-temperature electrolysis using anion exchange membranes (AEM) combines the benefits of established water electrolysis technologies based on alkaline electrolysis and proton exchange membrane electrolysis. The anion conductive ionomers (ACI) used in the AEM electrolyzer (AEMEL) electrodes has been investigated. The ACI serves two primary purposes: (i) facilitate hydroxide conduction between the catalyst and bulk electrolyte and (ii) bind the catalyst to the porous transport layer and membrane. High ion exchange capacity (IEC) ACIs are desired, however, high IEC can cause excessive water uptake (WU) and detrimental ACI swelling. Proper water management is a key factor in obtaining maximum performance in AEM-based devices. In this study, a series of poly(norbornene)-based ACIs were synthesized and deployed in hydrogen evolving AEMEL cathode electrodes. A balance between ionic conductivity, WU and ionomer swelling was achieved in the ACI by varying the IEC and degree of polymer cross-linking. It was found that higher IEC ACIs with light crosslinking are preferred in the HER electrode. Furthermore, such a configuration fine-tuned the WU and ionomer swelling to achieve optimum cell performance and reduce cell operating voltages.

08 HYDROGEN↗
DOE OSTI2025

Dark Matter Search Results from 4.2 Tonne−Years of Exposure of the LUX-ZEPLIN (LZ) Experiment

We report results of a search for nuclear recoils induced by weakly interacting massive particle (WIMP) dark matter using the LUX-ZEPLIN (LZ) two-phase xenon time projection chamber. This analysis uses a total exposure of 4.2 ±0.1 tonne-years from 280 live days of LZ operation, of which 3.3 ± 0.1 tonne-years and 220 live days are new. A technique to actively tag background electronic recoils from 214 Pb 𝛽 decays is featured for the first time. Enhanced electron-ion recombination is observed in two-neutrino double electron capture decays of 124 Xe, representing a noteworthy new background. After removal of artificial signal-like events injected into the dataset to mitigate analyzer bias, we find no evidence for an excess over expected backgrounds. World-leading constraints are placed on spin-independent (SI) and spin-dependent WIMP-nucleon cross sections for masses ≥9 GeV/𝑐 2 . The strongest SI exclusion set is 2.2×10 −48 cm 2 at the 90% confidence level and the best SI median sensitivity achieved is 5.1 ×10 −48 cm 2 , both for a mass of 40 GeV/𝑐 2 .

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2019

Technological and optical methods for increasing the spatial resolution of thermochemical laser writing on thin metal films

Various techniques, effects, and factors are examined that enable one to increase the spatial resolution of thermochemical direct laser writing on thin metal films. A few specific conditions of experimental laser processing with the focused beam of a CW green laser are investigated therewith. One of the goals of this work was to find a suitable metal and its thickness that would make it possible to implement the through-oxidation regime. When properly adjusting a value of laser exposure, this regime was found to be very useful for increasing the spatial resolution of the laser writing. This is due to bleaching of an oxidized film near the peak of a focused laser spot. Apart from the experimental results concerning the technology of laser processing of the metal films, in this work, there are also considered some ways of reducing a focused spot size used for the direct laser writing.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Green Factor

Los Alamos is designing a screening platform coupled to our biosensor to customize production processes in cell-free environments that offer biomanufacturers higher titers and yields, better resource utilization and cost-effective bioprocess. Our technology aims at enabling cell-free biosynthetic systems by providing enzyme variants generated by coupling with our biosensor technology, that can utilize cheap raw material cofactor analogues. This will enable bioprocesses based on cell free synthetic biology for a sustainable bioeconomy.

42 ENGINEERING↗
NASA NTRS2013

Aerospace Fuels From Nonpetroleum Raw Materials

Recycling human metabolic and plastic wastes minimizes cost and increases efficiency by reducing the need to transport consumables and return trash, respectively, from orbit to support a space station crew. If the much larger costs of transporting consumables to the Moon and beyond are taken into account, developing waste recycling technologies becomes imperative and possibly mission enabling. Reduction of terrestrial waste streams while producing energy and/or valuable raw materials is an opportunity being realized by a new generation of visionary entrepreneurs; several relevant technologies are briefly compared, contrasted and assessed for space applications. A two-step approach to nonpetroleum raw materials utilization is presented; the first step involves production of supply or producer gas. This is akin to synthesis gas containing carbon oxides, hydrogen, and simple hydrocarbons. The second step involves production of fuel via the Sabatier process, a methanation reaction, or another gas-to-liquid technology, typically Fischer-Tropsch processing. Optimization to enhance the fraction of product stream relevant to transportation fuels via catalytic (process) development at NASA Glenn Research Center is described. Energy utilization is a concern for production of fuels whether for operation on the lunar or Martian surface, or beyond. The term green relates to not only mitigating excess carbon release but also to the efficiency of energy usage. For space, energy usage can be an essential concern. Another issue of great concern is minimizing impurities in the product stream(s), especially those that are potential health risks and/or could degrade operations through catalyst poisoning or equipment damage; technologies being developed to remove heteroatom impurities are discussed. Alternative technologies to utilize waste fluids, such as a propulsion option called the resistojet, are discussed. The resistojet is an electric propulsion technology with a powered thruster to vaporize and heat a propellant to high temperature, hot gases are subsequently passed through a converging-diverging nozzle expanding gases to supersonic velocities. A resistojet can accommodate many different fluids, including various reaction chamber (by-)products.

Palaszewski, Bryan A.↗
DOE OSTI2021

Microbe-Encapsulated Silica Gel Biosorbents for Selective Extraction of Scandium from Coal Byproducts

Establishing an inexpensive and environmentally friendly scandium (Sc) supply is critical for the development of clean energy technologies. However, refining Sc from Sc-bearing sources using current technologies poses economic and environmental challenges due to its low concentration relative to base metals and chemically similar lanthanides. In this work, we developed a biosorption-based flow-through process for extraction of Sc from low-grade feedstocks. A novel biosorbent material was synthesized by encapsulating Arthrobacter nicotianae, a bacterium that selectively adsorbs Sc, within a porous silica matrix. Through the use of several complementary microscopy techniques, we demonstrated a highly porous biosorbent structure with a high cell-loading density and a homogenous cell distribution. Batch adsorption assays revealed selective Sc adsorption over lanthanides and common based metals, with the exception of Fe(III), as evidenced by separation factors greater than 50. The MESG particles were packed into fixed-bed columns to enable adsorption under flow-through conditions, which demonstrated effective Sc extraction at flow rates up to 0.08 cm/s and high stability for reuse; greater than 95% of the adsorption capacity was maintained after 10 consecutive adsorption/desorption cycles. When applied to a lignite coal leachate, whose Fe content was depleted through pH-mediated precipitation, the MESG particles yielded Sc breakthrough at 30 bed volumes, whereas all other metals broke through after only a few bed volumes. Following desorption, an eluate with a 124-fold increase in Sc purity was achieved relative to the lignite leachate with Sc constituting 96.4% of the total REEs. This study established a rapid, facile, and scalable cell immobilization approach that enables the use of microbial biomass for Sc recovery from low-grade sources.

Dong, Ziye↗
DOE OSTI2021

Phonon-engineered extreme thermal conductivity materials

Materials with ultrahigh or low thermal conductivity are desirable for many technological applications, such as thermal management of electronic and photonic devices, heat exchangers, energy converters and thermal insulation. Recent advances in simulation tools (first principles, the atomistic Green’s function and molecular dynamics) and experimental techniques (pump–probe techniques and microfabricated platforms) have led to new insights on phonon transport and scattering in materials and the discovery of new thermal materials, and are enabling the engineering of phonons towards desired thermal properties. Here, we review recent discoveries of both inorganic and organic materials with ultrahigh and low thermal conductivity, highlighting heat-conduction physics, strategies used to change thermal conductivity, and future directions to achieve extreme thermal conductivities in solid-state materials.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Mining Air for Fuels and Fine Chemicals

The Intergovernmental Panel on Climate Change’s 2021 report underscores that Direct Air Capture (DAC) is an essential component to limiting global warming to 2 °C, yet separating CO 2 from air and its subsequent concentration for conversion into carbon neutral fuels/chemicals or permanent storage remains energy intensive and costly. Further, most DAC technologies rely on repetitive capture and release cycles that reduces the amount of time the DAC materials are able to collect CO 2 and increases wear and tear. Moisture swing (MS) sorption within anion exchange materials utilizes differences in relative humidity to capture and concentrate CO 2 up to 500-fold with negligible energy inputs and low-cost sorbents. Molecular modeling predicts that membranes with a dry and wet side would actively transport CO 2 from its dry side to its wet side against a counter flow of H 2 O evaporating on the dry side, however, existing MS materials are too brittle to be processed into membranes to test this hypothesis. This project brought together experts in DAC materials and design, techno-economic analysis and project management at Arizona State University (ASU), polymer processing at University of Texas at Austin (UTA) and modeling gas transport and exchange at Norther Arizona University (NAU) to develop hollow fiber membranes that use energy from water evaporation to continuously pump CO 2 from air against a concentration gradient to the membranes interior and requiring significantly less energy than current DAC technologies. While this project did not meet its ultimate objectives of demonstrating an active CO 2 pumping membrane, a number of key accomplishments were made in developing low-cost, flexible anion exchange membranes (AEM) at 3.5 m 2 scale, characterizing the ionic and molecular transport within MS materials, and developing several analytical and mathematical models of the MS and pumping process leading to new fundamental knowledge about key rate limiting steps of CO 2 flux in anion exchange membranes at low water activity. Technoeconomic models show that if CO 2 fluxes ≥ 25 µmol CO 2 m -2 s -1 (membrane surface area) are achieved that cost ≤ $\$$100/tonne CO 2 captured, purified and compressed to pipeline quality is possible. The knowledge gained in this research will guide future research in developing new materials toward overcoming these rate limiting steps that in turn could enable transformative and disruptive DAC technologies needed for capturing gigatons of CO 2 per year needed to limiting global warming to 2 °C.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

High-Efficiency Low-Carbon Fuel Flexible Burner for Steel Industry

GTI Energy, with Bloom Engineering, Argonne National Laboratory and Oak Ridge National Laboratory, are developing the FlexGen-H burner. This high-efficiency burner can achieve 45•100% CO2e emissions reduction using green hydrogen with natural gas. It offers NOx, CO emissions ?50 ppm (3% O2), 15•51% fuel savings, ?50% PM2.5 reduction with turndown of ?5:1. The technology can work with renewable liquid fuels, ethanol or methanol. The technology aims to significantly reduce emissions, enhance resiliency, improve process efficiency. The paper will discuss preliminary results of development, with planned laboratory validation including safety, CFD, burner system design and market for the technology.

Sperry, McKay [ORNL] (ORCID:0009000658602049)↗
NASA NTRS2011

Alignment and Characterization of High Uniformity Imaging Spectrometers

Imaging spectrometers require precise adjustments, in some cases at the sub-micrometer level, in order to achieve auniform response over both the spectral and spatial dimensions. We describe a set of measurement techniques and theircorresponding alignment adjustments to achieve the 95% or higher uniformity specifications required for Earthobservingimaging spectrometers. The methods are illustrated with measurements from the Next Generation Imaging Spectrometer system that has been built at the Jet Propulsion Laboratory, California Institute of Technology, under contract with the National Aeronautics and Space Administration.

Offner spectrometer↗
DOE OSTI2025

Measurements and models of enhanced recombination following inner-shell vacancies in liquid xenon

Electron-capture decays of 125 Xe and 127 Xe , and double-electron-capture decays of 124 Xe , are backgrounds in searches for weakly interacting massive particles (WIMPs) conducted by dual-phase xenon time projection chambers such as LUX-ZEPLIN (LZ). These decays produce signals with more light and less charge than equivalent-energy 𝛽 decays and correspondingly overlap more with WIMP signals. We measure three electron-capture charge yields in LZ: the 1.1 keV M-shell, 5.2 keV L-shell, and 33.2 keV K-shell at drift fields of 193 and 96.5 V/cm. The LL double-electron-capture decay of 124 Xe exhibits even more pronounced shifts in charge and light. We provide a first model of double-electron-capture charge yields using the link between ionization density and electron-ion recombination, and identify a need for more accurate calculations. Finally, we discuss the implications of the reduced charge yield of these decays and other interactions creating inner-shell vacancies for future dark matter searches.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
NASA NTRS2012

The Future of Green Aviation

Dr. Edwards'presentation provides an overview of aviation's economic impact in the U.S. including aviation's impact on environment and energy. The presentation discusses NASA's contributions to the advancement of commercial aircraft design highlighting the technology drivers and recent technology advancements for addressing community noise, energy efficiency and emissions. The presentation concludes with a preview of some of NASA's integrated systems solutions, such as novel aircraft concepts and advancements in propulsion that will enable the future of more environmentally compatible aviation.

Edwards, Thomas↗
DOE OSTI2021

In Situ Wood Delignification toward Sustainable Applications

As one of the most abundant and versatile natural materials on Earth, recently wood has attracted tremendous attention from scientists and engineers due to its outstanding advantages, including hierarchically porous microstructure, high mechanical strength, environmental friendliness, renewability, and biodegradability. Wood’s hierarchically porous structure and chemical components (e.g., cellulose, hemicelluloses, and lignin) enable its mechanical, ionic, optical, and thermal properties to be tuned via physical, chemical, and/or thermal modifications. Among these various approaches, the chemical delignification of bulk wood is the most fascinating, in which the majority of lignin and hemicelluloses is removed while leaving the cellulose intact, maintaining wood’s physical integrity and hierarchical structure. This delignified structure is unique, composed of hollow, aligned channels made up of cellulose microfibrils, and particularly attractive given its origin from a sustainable and renewable resource. As a result, delignified wood has attracted increasing attention for applications that go far beyond traditional wood utilization, such as lightweight yet strong structural materials, energy storage and conversion, environmental remediation, flexible electronics, and bioengineering. Here, we review recent developments in bulk wood delignification strategies toward the achievement of such advanced wood technologies for sustainable applications, with a focus on the research in our group. Similar to chemical pulping and bleaching, wood delignification involves a series of nucleophilic reactions based on alkaline Na 2 SO 3 or Na 2 S systems (i.e., chemical pulping) or electrophilic, radical, and oxidation reactions based on H 2 O 2 , ClO 2 , or NaClO systems (i.e., chemical bleaching) to deconstruct, fragment, and promote the hydrophilicity of lignin macromolecules, which finally make lignin easier to be removed. We discuss the structure and properties of partially and near-completely delignified wood, with a focus on process-structure–property relationships. The resulting delignified wood materials, with tunable structure and properties, demonstrate various advanced functions, in a wide range of advanced applications, such as building and construction, green energy, and electronics. Finally, the potential challenges and appealing perspectives of in situ wood delignification are discussed. In situ wood delignification, as a powerful modification strategy, has speeded up the development of advanced wood technologies and wood-based functional materials and products.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Mexico and U.S. Power Systems Under Variations in Natural Gas Prices

This study examines the impact of natural gas prices on the power systems of Mexico and the United States. For this, we develop an integrated modeling framework by soft linking three different techno-economic bottom-up models of the power and energy systems, one partial equilibrium model of the natural gas sector, and a partial equilibrium model of the Mexican energy sector. Our results show several interesting results: high natural gas prices raise the use of carbon-intensive technologies in the short-term and boost renewable investments at longer time intervals, increasing emissions in earlier periods and reducing them thereafter. Regarding system costs, because of more capital-intensive green power and lower expenditures in raw energy carriers, capital costs rise and operating costs decrease in the long haul. Furthermore, we see an increase in natural gas demand when its price is low, reducing long-term capital and operating costs through cheaper energy inputs in natural gas facilities and a lower share of capital-intensive renewable facilities in the power system. Concerning emissions, low natural-gas prices decrease coal use in the United States, reducing anthropogenic emissions until the last stages of the optimization period. For Mexico, they show heterogeneous results across models. Policymakers can use this study's results to understand the influence of natural gas prices in the Mexican and United States energy sectors.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗
DOE OSTI2022

Ligand Control of Structural Diversity in Luminescent Hybrid Copper(I) Iodides

Copper(I) iodide hybrids are of interest for next-generation lighting technologies because of their efficient luminescence in the absence of rare-earth elements. Here, we report 10 structurally diverse hybrid copper(I) iodides that emit in the green–red region with quantum yields reaching 67%. The compounds display a diversity of structures including ones with one-dimensional (1D) Cu–1 chains, Cu 2 I 2 rhomboid dimers, and structures with two different arrangements of Cu 4 I 4 tetramers. The compounds with Cu 2 I 2 rhomboid dimers or Cu 4 I 4 cubane tetramers have higher photoluminescence quantum yields than those with Cu–I 1D chains and octahedral Cu 4 I 4 tetramers, owing to the optimal degree of condensation of the inorganic motifs, which suppresses nonradiative processes. Electronic structure calculations on these compounds point out the critical influence of the inorganic motif and organic ligand on the nature of the band gaps and thus the excitation characteristics. Temperature-dependent photoluminescence spectra are presented to better understand the nature of luminescence in compounds with different inorganic motifs. Here. the emerging understanding of composition–structure–property correlations in this family provides inspiration for the rational design of hybrid phosphors for general lighting applications.

36 MATERIALS SCIENCE↗
DOE OSTI2021

A reactive flow model for the 3,3'-diamino-4,4'-azoxyfurazan based plastic bonded explosive (PBX 9701)

Here, this paper describes the calibration of the Arrhenius Wescott–Stewart–Davis (AWSD) reactive flow model for the recently developed high explosive PBX 9701, which consists of 97% 3,3'-diamino-4,4'-azoxyfurazan (DAAF) and 3% FK-800 binder by weight. DAAF-based explosive formulations have several desirable qualities as they are relatively insensitive to non-shock insults but have higher performance than triaminotrinitrobenzene based formulations. Equations of state for the explosive reactants and products are calibrated using a combination of existing and new experimental data and theoretical calculations. The AWSD rate law calibration utilizes both one-dimensional shock-to-detonation and multidimensional rate stick experiments to capture the shock initiation and propagating detonation regimes. Validation of the calibrated model is demonstrated through comparison with recent gas-gun experiments.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗
DOE OSTI2021

Development of Algal Biomass Yield Improvements in an Integrated Process (Final Report)

This project built on the success of Global Algae Innovations Algae Biomass Yield Phase 1 project to accelerate the commercialization of algal biofuels through development of an integrated, economical, photosynthetic, open raceway system to produce algal oil. Two parallel pathways to a biofuel were investigated. In the algal crude oil pathway, highlighted in blue, the dewatered algal biomass slurry is used as a feed to hydrothermal liquefaction to produce an algae crude oil and recycle aqueous stream. In the algal lipid oil pathway, highlighted in green, the algal biomass slurry is dried, and the oil is extracted to produce an algal lipid oil biofuel intermediate and a high protein algae meal co-product. Upgrading to drop-in fuels has been demonstrated for the biofuel intermediates in both pathways. Since the algal lipid oil pathway requires lipid accumulation, the productivity is generally lower than the algal crude oil pathway, but the required productivity for economical algal biofuel production is also lower because the coproduct value is greater. The outdoor cultivation was performed at the Kauai Algae Farm. The project team has expertise across the full breadth strain development, advanced algal cultivation, open raceway contamination control, CO 2 supply, harvesting, dewatering, extraction, hydrothermal liquefaction, technoeconomic analysis and life cycle analysis: Hildebrand laboratory at Scripps Institution of Oceanography – diatom strain development. Mayfield laboratory at UCSD - green algae strain development. TSD Management Associates- CO 2 supply, algal harvesting and dewatering, and algal drying and extraction. Qualitas - large-scale test site for algal harvesting technology. Texas A&M University - algal drying and extraction technology. Pacific Northwest National Laboratory - hydrothermal liquefaction technology. GE Water and Power - membrane technology. National Renewable Energy Laboratory - algal techno-economic analysis. Phase 1 of the project resulted in tremendous productivity and pre-processing improvements in an integrated, large-scale, low-cost cultivation and pre-processing process that moved algal technology closer to economic viability for biofuels than ever before. Phase 2 accomplishments further facilitate development of a commercial algal biofuel industry by adding: several top performing strains and strain development tools including breeding; open-pond cultivation innovations that achieved a 30% improvement in overall productivity, an 83% reduction in cost, and a 95% reduction in energy use relative to conventional technology; further improvements in harvesting that led to the Zobi harvester ® as a universal, economical, low energy, commercially available microalgae harvesting solution; breakthroughs in drying and extraction including a new low energy drying process and several new low energy extraction unit operations that together with the Zobi harvester ® achieve a 90% reduction in cost and 97% reduction in energy use relative to conventional technology. These improvements are sufficient to enable economical production of algae biofuel and protein meal co-product if the process were scaled up to a commercial-scale 5,000-acre algae farm.

09 BIOMASS FUELS↗
DOE OSTI2022

Data Report: Pore Water Geochemistry at Green Canyon 955, deepwater Gulf of Mexico

Two holes were drilled in Green Canyon Block 955 (GC 955) in the deepwater Gulf of Mexico: Hole GC 955 H002 (H002) and Hole GC 955 H005 (H005). Here we present the solute concentrations and oxygen and hydrogen isotope ratios of pore water extracted from sediment whole-round samples collected from these holes. The analytical methods, degree of sample contamination, and the method for contamination correction are discussed as are the general trends in the geochemical data.

03 NATURAL GAS↗