Methods and apparatus employing vibratory energy for wrenching Patent
Ultrasonic wrench for applying vibratory energy to mechanical fasteners
Blaise, H. T.↗
SEARCH · Engineering Papers
Results for “fasteners”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Flexibly connected support and skin Patent
Development of resilient fastener for attaching skin of aerospace vehicles to permit movement of skin relative to framework
Leffke, W. O.↗
Bolted Joints Under Sustained Loading
Bolted joint assemblies under sustained loading, examining joint and fastener coating, bolt design and strength level and shear and tension stress effects
Lobb, V.↗
A permeable rotating-wheel solvent extractor
Column-type device reported employs circular permeable structures of wire mesh screen for extracting solvents from systems with low density differences and low interfacial tensions. Rotating screen wheels of structure fasten to shaft; stationary screen structures are supported by circular bands connected by radial metal arms.
Kahn, D. R.↗
Adjustable locking device
Adjustable locking device is used for taking up end play of shaft without displacing shaft radially. Coincidentally threaded collars fastened to one or both ends of shaft are threaded in and out of one another for adjustment of end play. Intrinsic feature is its ability to be locked in any translatory position without axial displacement of shaft.
Fincannon, O. J.↗
Reentry thermal protection from Pioneer F RTG insulation material
Ablation tests were performed on the insulation material used in the Pioneer F radioisotope thermoelectric generator (RTG) in the Ames Arc-Heated Planetary-Gas Wind Tunnel. Test results indicate that the material, trade name Min-K 1301, should experience little ablation for heat transfer rates below 40 BTU/sq ft-sec. If the current design were to be changed so that the various pieces of Min-K were fastened or interlocked together the total amount of heat delivered to the RTG heat source during an earth orbital decay reentry would be reduced by at least 22.7%.
Vorreiter, J. W.↗
Residual strength and crack propagation tests on C-130 airplane center wings with service-imposed fatigue damage
Fourteen C-130 airplane center wings, each containing service-imposed fatigue damage resulting from 4000 to 13,000 accumulated flight hours, were tested to determine their fatigue crack propagation and static residual strength characteristics. Eight wings were subjected to a two-step constant amplitude fatigue test prior to static testing. Cracks up to 30 inches long were generated in these tests. Residual static strengths of these wings ranged from 56 to 87 percent of limit load. The remaining six wings containing cracks up to 4 inches long were statically tested as received from field service. Residual static strengths of these wings ranged from 98 to 117 percent of limit load. Damage-tolerant structural design features such as fastener holes, stringers, doublers around door cutouts, and spanwise panel splices proved to be effective in retarding crack propagation.
Snider, H. L.↗
Fatigue and fail-safe design features of the DC-10 airplane
The philosophy and methods used in the design of the DC-10 aircraft to assure structural reliability against cracks under repeated service loads are described in detail. The approach consists of three complementary parts: (1) the structure is designed to be fatigue resistant for a crack-free life of 60,000 flight hours; (2) inasmuch as small undetected cracks could develop from other sources, such as material flaws and manufacturing preloads, the structure also is designed to arrest and control cracks within a reasonable service-inspection interval; and (3) a meaningful service-inspection program has been defined on the basis of analysis and test experience from the design development program. This service-inspection program closes the loop to assure the structural integrity of the DC-10 airframe. Selected materials, fasteners, and structural arrangements are used to achieve these design features with minimum structural weight and with economy in manufacturing and maintenance. Extensive analyses and testing were performed to develop and verify the design. The basic design considerations for fatigue-resistant structure are illustrated in terms of material selection, design loads spectra, methods for accurate stress and fatigue damage analysis, and proven concepts for efficient detail design.
Stone, M. E.↗
Practical aspects of designing for and evaluating structural integrity
The application of procedures for designing and evaluating structural integrity of various construction techniques is discussed. The fatigue performance improvement of the following conditions is described: (1) conical fasteners, (2) hole preparation, (3) interference fit, and (4) interference protection. The application of fatigue tests to determine fail-safe conditions is analyzed.
Peyrony, M.↗
Development of Lightweight Material Composites to Insulate Cryogenic Tanks for 30-Day Storage in Outer Space
A conceptual design was developed for an MLI system which will meet the design constraints of an ILRV used for 7- to 30-day missions. The ten tasks are briefly described: (1) material survey and procurement, material property tests, and selection of composites to be considered; (2) definition of environmental parameters and tooling requirements, and thermal and structural design verification test definition; (3) definition of tanks and associated hardware to be used, and definition of MLI concepts to be considered; (4) thermal analyses, including purge, evacuation, and reentry repressurization analyses; (5) structural analyses (6) thermal degradation tests of composite and structural tests of fastener; (7) selection of MLI materials and system; (8) definition of a conceptual MLI system design; (9) evaluation of nondestructive inspection techniques and definition of procedures for repair of damaged areas; and (10) preparation of preliminary specifications.
Krause, D. R.↗
Refurbishment cost study of the thermal protection system of a space shuttle vehicle, phase 2
Labor costs and techniques associated with the refurbishment of representative TPS and their attach concepts suitable for space shuttle application have been identified on the basis of experimental tests. Ablative and reusable surface insulation TPS configurations were designed, fabricated, and tested on a full-scale mockup. The TPS attachment methods investigated included pi-strap, multiple mechanical fasteners, key/keyway, and direct bond concepts. Techniques for performing installation, inspection, repair and replacement of TPS components were studied by examining a variety of shop procedures. Major problem areas associated with these procedures and the designs to which they were applied were analyzed for several significant parameters such as handling, gaskets between joints, repair techniques, ablator plugs, etc. Results of time and motion studies of specific maintenance tasks, simulating operational procedures, were obtained. Using these data, refurbishment labor cost projections were generated for a representative Space Shuttle orbiter.
Haas, D. W.↗
Development and evaluation of vacuum pressure gauge components from carbon and graphite
A prototype all carbon triode ultrahigh vacuum gage was fabricated and tested. The gage exhibited a sensitivity of 3.7 per torr for nitrogen and an X-ray background approximately 0.1 as large as would be expected of a metal gage of the same design. The gage made from these materials, showed good sensitivity and durability. A practical technique was developed for bonding carbon components together without metal fasteners. The bond is made with a cross-linked phenolic resin which is converted to vitreous carbon by a careful pyrolysis procedure. The resulting bonds are strong, electrically conductive, and can withstand repeated excursions to 2500 K in vacuum. Measurements of adsorption and outgassing characteristics of four refractory carbons have confirmed that such materials are suitable for use in ultrahigh vacuum and that some are superior refractory metals in man respects.
Benson, D. K.↗
Fiberglass supports for cryogenic tanks
Analysis, design, fabrication, and test activities were conducted to develop additional technology needed for application of filament-wound fiberglass struts to cryogenic flight tankage. It was conclusively verified that monocoque cylinder or ogive struts are optimum or near-optimum for the range of lengths and loads studied, that a higher strength-to-weight ratio can be achieved for fiberglass struts than for any metallic struts, and that integrally-wrapped metallic end fittings can be used to achieve axial load transfer without reliance on bond strength or mechanical fasteners.
Keller, C. W.↗
Design synthesis of a boron/epoxy reinforced metal shear web.
An advanced composite shear web design concept has been developed for the Space Shuttle Orbiter main engine thrust beam structure. Various web concepts were synthesized by a computer-aided adaptive random search procedure. A practical concept is identified having a titanium-clad, boron/epoxy plate with vertical boron/epoxy reinforced stiffeners. Baseline composite and titanium shear resistant designs are compared; the composite concept is 28% lighter than the titanium web. Element test results show the metal cladding effectively reinforces critical composite load transfer and fastener hole areas making the composite web concept practical for other shear structure applications.-
Laakso, J. H.↗
Development of dispersion-strengthened Ni-Cr-ThO2 alloys for the space shuttle thermal protection system.
An improved manufacturing process has been developed for TD-NiCr that provides sheet of improved quality, better gage control, and reproducible properties. A standard manufacturing process has been developed for the alternate alloy, DS-NiCr, produced by pack-chromizing Ni-2ThO2 sheet. Extension of forming and joining technology for TD-NiCr is in process. Formability criteria are being established for basic sheet forming processes related to the manufacture of Shuttle TPS panels. They include brake forming, corrugation forming, joggling, dimpling, and beading. Joining processes applicable to TPS panels are being optimized with emphasis on establishment of joint efficiencies. Resistance spot welding (fusion and solid state), resistance seam welding, solid-state diffusion welding, and brazing are included in the joining programs. Development of improved manufacturing technology for TD-NiCr fasteners is also being accomplished. Mechanical and physical properties of TD-NiCr are being characterized to provide design-allowable data.
Blankenship, C. P.↗
Bimetallic devices for stirring fluids
Device consists of helical heating coil inside cylinder and affixed at one end. Piston is fastened at other end and is free to move axially through cylinder. Electrical power extends coil when applied to conductors. Bimetallic stirrer may also be made in vane form.
Canning, T. N.↗
Improved fiberglass-to-metal joint produces lighter stronger fiberglass strut
Axial tension and compression are transmitted between end fittings and fiberglass tube without depending on glass-to-metal bonding, conventional fasteners or combination of these things. Joint design significantly reduces both structural weight of strut and its cross-sectional area.
Barber, J. R.↗