Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “error indicators”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

THE PHOTOMETRIC AND KINEMATIC STRUCTURE OF FACE-ON DISK GALAXIES. II. INTEGRATED LINE PROFILE CHARACTERIZATION AND THE ORIGIN OF LINE PROFILE ASYMMETRY

We perform a moments analysis of H I and H II global line profiles for 33 nearly face-on disk galaxies for the threefold purpose of rationalizing and interpreting line profile indices in the literature, presenting robust moment definitions with analytic error functions calibrated against Monte Carlo simulation, and probing the physical origin of line profile asymmetries. The first four profile moments serve as viable surrogates for the recession velocity, line width, asymmetry, and profile shape, respectively. The first three moments are superior, by a factor of {approx}2 in precision, to related quantities defined in the literature. First and third profile moments are related; skew can be used to calculate more accurate recession velocities from global profiles. Second and fourth profile moments are linked, corresponding to the known trend that narrow (but well resolved) line widths tend to be more Gaussian. H{alpha} kurtosis also appears correlated with the spatially resolved line width of the ionized gas. No systematics appear between various measures of line width and true rotation speed other than the wide range of normalizations, which we calibrate. This conclusion and calibration, however, is highly sample dependent. The ratio of H II to H I widths is consistent with unity, even at low projected line width. There may be a trend toward a decrease in the ratio of H II to H I widths consistent with previous studies, but we also observe greater scatter. While there is good agreement between H I and H II first, second, and fourth moments, we find no positive correlation between skew measured from H I and H II profiles. Detailed analysis of the spatially resolved H{alpha} distribution demonstrates that H II global profile asymmetries are dominated by differences in the gas distribution, not kinematic asymmetries.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Compressed baryon acoustic oscillation analysis is robust to modified-gravity models

Abstract We study the robustness of the baryon acoustic oscillation (BAO) analysis to the underlying cosmological model. We focus on testing the standard BAO analysis that relies on the use of a template. These templates are constructed assuming a fixed fiducial cosmological model and used to extract the location of the acoustic peaks. Such “compressed analysis” had been shown to be unbiased when applied to the ΛCDM model and some of its extensions. However, it has not been known whether this type of analysis introduces biases in a wider range of cosmological models where the template may not fully capture relevant features in the BAO signal. In this study, we apply the compressed analysis to noiseless mock power spectra that are based on Horndeski models, a broad class of modified-gravity theories specified with eight additional free parameters. We study the precision and accuracy of the BAO peak-location extraction assuming DESI, DESI II, and MegaMapper survey specifications. We find that the bias in the extracted peak locations is negligible; for example, it is less than 10% of the statistical error for even the proposed future MegaMapper survey. Our findings indicate that the compressed BAO analysis is remarkably robust to the underlying cosmological model.

Astronomy & Astrophysics↗

Private Tabular Survey Data Products through Synthetic Microdata Generation

We propose two synthetic microdata approaches to generate private tabular survey data products for public release. We adapt a pseudo posterior mechanism that downweights by-record likelihood contributions with weights ∈[0,1] based on their identification disclosure risks to producing tabular products for survey data. Our method applied to an observed survey database achieves an asymptotic global probabilistic differential privacy guarantee. Our two approaches synthesize the observed sample distribution of the outcome and survey weights, jointly, such that both quantities together possess a privacy guarantee. The privacy-protected outcome and survey weights are used to construct tabular cell estimates (where the cell inclusion indicators are treated as known and public) and associated standard errors to correct for survey sampling bias. Through a real data application to the Survey of Doctorate Recipients public use file and simulation studies motivated by the application, we demonstrate that our two microdata synthesis approaches to construct tabular products provide superior utility preservation as compared to the additive noise approach of the Laplace Mechanism. Moreover, our approaches allow the release of microdata to the public, enabling additional analyses at no extra privacy cost.

Mathematical Methods In Social Sciences↗

Quasisymmetric Optimization of Nonaxisymmetry in Tokamaks

Predictive 3D optimization reveals a novel approach to modify a nonaxisymmetric magnetic perturbation to be entirely harmless for tokamaks, by essentially restoring quasisymmetry in perturbed particle orbits as much as possible. Such a quasisymmetric magnetic perturbation (QSMP) has been designed and successfully tested in the KSTAR and DIII-D tokamaks, demonstrating no performance degradation despite the large overall amplitudes of nonaxisymmetric fields and strong response otherwise expected in the tested plasmas. The results indicate that a quasisymmetric optimization is a robust path of error field correction across the resonant and nonresonant field spectrum in a tokamak, leveraging the prevailing concept of quasisymmetry for general 3D plasma confinement systems such as stellarators. Finally, the optimization becomes, in fact, a simple eigenvalue problem to the so-called torque response matrices if a perturbed equilibrium is calculated consistent with nonaxisymmetric neoclassical transport.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Predictive Model for Starlink Maritime Performance Using Multi-Horizon RandomForest

Low Earth orbit (LEO) satellite systems have become a crucial enabler of broadband access for maritime industries, where traditional networks are unavailable. However, the high mobility of LEO constellations and constantly changing weather conditions result in unpredictable link fluctuations, limiting the ability of maritime platforms to plan bandwidth usage proactively. To the best of our knowledge, no prior work has developed a short-term predictive model for maritime LEO connectivity using real experimental field measurements. This paper proposes a data-driven forecasting model that predicts future downlink throughput using multi-horizon RandomForest regression. The model is trained using real experimental coastal measurement data incorporating recent throughput history, network-layer indicators, and environmental variables. The proposed approach reduces mean absolute error by approximately 31% compared to a persistence baseline for 15-minute horizons. It maintains a measurable improvement at 30 minutes, despite increased stochasticity. These findings confirm that proactive bandwidth awareness is feasible on maritime platforms and can effectively support operational decisions such as adaptive streaming, routing, and resource scheduling. The performance gap between forecasting horizons also highlights the need for expanded offshore datasets to improve prediction robustness under harsher maritime environments.

97 MATHEMATICS AND COMPUTING↗

SU-E-T-243: MonteCarlo Simulation Study of Polymer and Radiochromic Gel for Three-Dimensional Proton Dose Distribution

Purpose: To estimate the three dimensional dose distributions in a polymer gel and a radiochromic gel by comparing with the virtual water phantom exposed to proton beams by applying Monte Carlo simulation. Methods: The polymer gel dosimeter is the compositeness material of gelatin, methacrylic acid, hydroquinone, tetrakis, and distilled water. The radiochromic gel is PRESAGE product. The densities of polymer and radiochromic gel were 1.040 and 1.0005 g/cm3, respectively. The shape of water phantom was a hexahedron with the size of 13 × 13 × 15 cm3. The proton beam energies of 72 and 116 MeV were used in the simulation. Proton beam was directed to the top of the phantom with Z-axis and the shape of beam was quadrangle with 10 × 10 cm2 dimension. The Percent depth dose and the dose distribution were evaluated for estimating the dose distribution of proton particle in two gel dosimeters, and compared with the virtual water phantom. Results: The Bragg-peak for proton particles in two gel dosimeters was similar to the virtual water phantom. Bragg-peak regions of polymer gel, radiochromic gel, and virtual water phantom were represented in the identical region (4.3 cm) for 72 MeV proton beam. For 116 MeV proton beam, the Bragg-peak regions of polymer gel, radiochromic gel, and virtual water phantom were represented in 9.9, 9.9 and 9.7 cm, respectively. The dose distribution of proton particles in polymer gel, radiochromic gel, and virtual water phantom was approximately identical in the case of 72 and 116 MeV energies. The errors for the simulation were under 10%. Conclusion: This work indicates the evaluation of three dimensional dose distributions by exposing proton particles to polymer and radiochromic gel dosimeter by comparing with the water phantom. The polymer gel and the radiochromic gel dosimeter show similar dose distributions for the proton beams.

07 ISOTOPE AND RADIATION SOURCES↗

Ultrasound viscoelasticity assessment using an adaptive torsional shear wave propagation method

Purpose: Different approaches have been used in dynamic elastography to assess mechanical properties of biological tissues. Most techniques are based on a simple inversion based on the measurement of the shear wave speed to assess elasticity, whereas some recent strategies use more elaborated analytical or finite element method (FEM) models. In this study, a new method is proposed for the quantification of both shear storage and loss moduli of confined lesions, in the context of breast imaging, using adaptive torsional shear waves (ATSWs) generated remotely with radiation pressure. Methods: A FEM model was developed to solve the inverse wave propagation problem and obtain viscoelastic properties of interrogated media. The inverse problem was formulated and solved in the frequency domain and its robustness to noise and geometric constraints was evaluated. The proposed model was validated in vitro with two independent rheology methods on several homogeneous and heterogeneous breast tissue-mimicking phantoms over a broad range of frequencies (up to 400 Hz). Results: Viscoelastic properties matched benchmark rheology methods with discrepancies of 8%–38% for the shear modulus G′ and 9%–67% for the loss modulus G″. The robustness study indicated good estimations of storage and loss moduli (maximum mean errors of 19% on G′ and 32% on G″) for signal-to-noise ratios between 19.5 and 8.5 dB. Larger errors were noticed in the case of biases in lesion dimension and position. Conclusions: The ATSW method revealed that it is possible to estimate the viscoelasticity of biological tissues with torsional shear waves when small biases in lesion geometry exist.

60 APPLIED LIFE SCIENCES↗

Estimating Fine-Resolution Shortwave Broadband Albedo of Croplands from Harmonized Landsat and Sentinel-2 Data

Altered surface albedo due to land-cover conversions and management is a significant driver of global climate change. Albedo can be directly measured at ground stations, and remote sensing data can be used to scale-up albedo values to regional and global levels. Some previous studies have retrieved fine-resolution (10–30 m) instantaneous albedo and coarse-resolution (500–1000 m) daily mean albedo from remote sensing data, but they all required the input of Moderate Resolution Imaging Spectroradiometer (MODIS) albedo information at 500-m resolution, and none have assembled both instantaneous and daily albedo based exclusively on fine-resolution satellite data. Here, to address this issue, we compiled 387 instantaneous and 346 daily albedo records using field net radiometer measurements from the bioenergy croplands at the W. K. Kellogg Biological Station in southwest Michigan. We then connected these albedo records with a suite of variables derived from harmonized Landsat and Sentinel-2 data through two machine learning algorithms (random forest regression and extreme gradient boosting) to retrieve clear-sky instantaneous and daily shortwave broadband albedo. The performance statistics indicate reasonable accuracy of model results [root-mean-square error (RMSE)] around or below 0.03 except for snow-covered surfaces), suggesting that the retrieval of both instantaneous and daily albedo based exclusively on fine-resolution satellite data is promising. To facilitate the use of fine-resolution albedo products at the global level, future efforts need to include more albedo records of diverse surface cover types, as well as to accurately model daily albedo for cloudy days to address the “clear-sky bias.”

Harmonized Landsat and Sentinel-2↗

Testing of an Iodine and Tritium Capture System for an NO₂-Based Tritium Pretreatment Process

The reprocessing of used nuclear fuel would release volatile radionuclides into the off-gas streams of a processing plant, including ³H, ¹⁴C, ⁸⁵Kr, and ¹²⁹I. One potential simplification to the management of the off-gas streams could be achieved through an efficient tritium pretreatment (TPT) step in which the UO₂ fuel is oxidized by either air or NO₂ before dissolution. The oxidation of the UO₂ fuel matrix will result in the release of tritium from the fuel. Upfront release of tritium from the fuel in a pretreatment step with subsequent tritium abatement can minimize or eliminate the distribution of tritium throughout a plant. This can decrease or eliminate the need for tritium capture on multiple off-gas streams and prevent distribution to the aqueous inventory. The use of NO₂ as the oxidant in an advanced tritium pretreatment (ATPT) allows for the oxidation to be performed at lower temperatures and may also result in the quantitative release of iodine from the fuel. The ATPT off-gas will contain up to 75 vol% NO₂ gas. Spencer et al. identified the most promising iodine sorbent as silver nitrate-impregnated alumina (AgA) and the most promising tritium sorbents as 3Å molecular sieve (3Å MS) and silica gel for radionuclide capture from ATPT off-gas streams. An initial series of tests were conducted in fiscal years 2017–2018 with the intent of demonstrating the recovery of iodine and tritium using these sorbents from a recirculating gas stream that simulated the NO₂ recycle loop envisioned for the ATPT system. These initial tests showed low tritium recoveries and significant variations in the iodine recovery on the AgA. Ultimately it was concluded, following disassembly of the system, that corrosion within the system was partially the cause of the poor recovery of both species. All components of that system were disposed of at the end of the analysis. One of the conclusions drawn from the initial tests pointed to the reconsideration of the materials of construction. Based on that recommendation a new test bed for the advanced TPT off-gas system, that addresses the issues identified in the fiscal years 2017 and 2018 scoping tests, was designed and constructed. The test bed used high nickel alloys wherever possible to address the previously observed corrosion issues, a redesigned surge tank to permit ease of purging, an improved feed injection system and a more modular system design that allowed testing of incremental increases in system complexity to allow the isolation of any element that results in changes to recovery of target species. Accompanying that design, a multifaceted test plan was completed. The overarching goals of this test series were two-fold. The first goal was to demonstrate the ability to recover both the iodine and tritium that would be released during TPT in a manner that the releases from the fuel can be quantified. The second goal was to demonstrate that the combined recovery system could operate in any of the three proposed TPT modes (once-through air or O₂, recirculating air or O₂, or recirculating NO x ). A total of 22 tests were completed. Ten tests examined tritium behavior under varying operating parameters, 8 tests examined iodine behavior under varying operating parameters, and 4 tests examined both tritium and iodine behavior. Silica gel was used for the tritium sorbent, and AgA or Ag-mordenite (AgZ) was used as the iodine sorbent. The following conclusions were drawn: Full recovery is achieved for both sorbates when no sorbent is in place indicating no accumulation within the test system. In even the simplest of the configurations (i.e., no sorbents in the columns), iodine is more difficult to transport and recover from the system than tritium. Analysis of the AgA iodine sorbent beds from the integrated tritium and iodine tests indicate quantitative iodine recovery can be achieved (within anticipated experimental errors). This system may provide a means for the quantification of the iodine released by the ATPT process within the experimental uncertainties. This would support 0.33 to 1.00 kg demonstrations of the ATPT process with actual used nuclear fuel. Iodine penetrated further into AgZ than into AgA when operated in gas recirculation mode. Tritium adsorbs to and cannot be fully recovered from the 10-cm column of silica gel at regeneration temperatures up to 140 °C.; Tritium adsorbs to and cannot be recovered from the 10-cm column of AgA at desorption temperatures up to 200 °C. Co-adsorbed tritium was recovered to a greater extent from AgZ than from AgA, but recovery was not complete. No visible corrosion was observed in the test system.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

A comparative study of Rosenbrock-type and implicit Runge-Kutta time integration for discontinuous Galerkin method for unsteady 3D compressible Navier-Stokes equations

A comparative study of two classes of third-order implicit time integration schemes is presented for a third-order hierarchical WENO reconstructed discontinuous Galerkin (rDG) method to solve the 3D unsteady compressible Navier-Stokes equations: — 1) the explicit first stage, single diagonally implicit Runge-Kutta (ESDIRK3) scheme, and 2) the Rosenbrock-Wanner (ROW) schemes based on the differential algebraic equations (DAEs) of Index-2. Compared with the ESDIRK3 scheme, a remarkable feature of the ROW schemes is that, they only require one approximate Jacobian matrix calculation every time step, thus considerably reducing the overall computational cost. A variety of test cases, ranging from inviscid flows to DNS of turbulent flows, are presented to assess the performance of these schemes. Here, numerical experiments demonstrate that the third-order ROW scheme for the DAEs of index-2 can not only achieve the designed formal order of temporal convergence accuracy in a benchmark test, but also require significantly less computing time than its ESDIRK3 counterpart to converge to the same level of discretization errors in all of the flow simulations in this study, indicating that the ROW methods provide an attractive alternative for the higher-order time-accurate integration of the unsteady compressible Navier-Stokes equations.

97 MATHEMATICS AND COMPUTING↗

Cluster-Continuum Calculations of Hydration Free Energies of Anions and Group 12 Divalent Cations

Understanding aqueous phase processes involving group 12 metal cations is relevant to both environmental and biological sciences. Here, quantum chemical methods and polarizable continuum models are used to compute the hydration free energies of a series of divalent group 12 metal cations (Zn2+, Cd2+, and Hg2+) together with Cu2+ and the anions OH , SH , Cl , and F . A cluster-continuum method is employed, in which gas-phase clusters of the ion and explicit solvent molecules are immersed in a dielectric continuum. Two approaches to define the size of the solute-water cluster are compared, in which the number of explicit waters used is either held constant or determined variationally as that of the most favorable hydration free energy. Results obtained with various polarizable continuum models are also presented. Each leg of the relevant thermodynamic cycle is analyzed in detail to determine how different contributions yield the observed mean signed error (MSE) and the standard deviation of the error (STDEV) between theory and experiment. The use of a constant number of water molecules for each set of ions is found to lead to predicted relative trends that benefit from error cancellation. Overall, the best results are obtained with MP2 and the Solvent Model D polarizable continuum model (SMD), with eight explicit water molecules for anions and ten for the metal cations, yielding a STDEV of 2.3 kcal/mol and MSE of 0.9 kcal/mol between theoretical to experimental hydration free energies, which range from -72.4 kcal/mol for SH to -505.9 kcal/mol for Cu2+. Using B3PW91 with DFT-D3 dispersion corrections (B3PW91-D) and SMD yields a STDEV of 3.3 kcal mol 1 and MSE of 1.6 kcal/mol, to which adding MP2 corrections from smaller divalent metal ion water molecule clusters yields very good agreement with the full MP2 results. Using B3PW91-D and SMD, with two explicit water molecules for anions and six for divalent metal cations also yields reasonable agreement with experiment, due in part to fortuitous error cancellation associated with the metal cations. Overall, the results indicate that the careful application of quantum chemical cluster-continuum methods provides valuable insights into aqueous ionic processes that depend on both local and long-range electrostatic interactions with the solvent.

binding energy↗

THE LOSS OF ACCURACY OF STOCHASTIC COLLOCATION METHOD IN SOLVING NONLINEAR DIFFERENTIAL EQUATIONS WITH RANDOM INPUT DATA

n this paper we show how stochastic collocation method (SCM) could fail to con- verge for nonlinear differential equations with random coefficients. First, we consider Navier-Stokes equation with uncertain viscosity and derive error estimates for stochastic collocation discretization. Our analysis gives some indicators on how the nonlinearity negatively affects the accuracy of the method. The stochastic collocation method is then applied to noisy Lorenz system. Simulation re- sults demonstrate that the solution of a nonlinear equation could be highly irregular on the random data and in such cases, stochastic collocation method cannot capture the correct solution.

Webster, Clayton G↗

New MiniBooNE Results

The MiniBooNE experiment at Fermilab was designed to be a definitive test of the LSND evidence for neutrino oscillations and has recently reported first results of a search for electron-neutrino appearance in a muon-neutrino Booster beam. No significant excess of events was observed at higher energies, but a sizable excess of events was observed at lower energies. The lack of the excess at higher energies allowed MiniBooNE to rule out simple two-neutrino oscillations as an explanation of the LSND signal. However, the excess at lower energies is presently unexplained. A new data set of neutrinos from the NuMI beam line measured with the MiniBooNE detector at Fermilab has been analyzed. The measurement of NuMI neutrino interactions in MiniBooNE provide a clear proof-of-principle of the off-axis beam concept that is planned to be used by future neutrino experiments such as T2K and NOvA. Moreover, it complements the first oscillation results and will help to determine whether the lower-energy excess is due to background or to new physics. New results from the re-analysis of low energy excess from the Booster beam line and the results from measurements of neutrino interactions from NuMI beam line are discussed. MiniBooNE observes an unexplained excess of 128.8 {+-} 20.4 {+-} 38.3 electron-like events in the energy region 200 < E{sub {nu}} < 475 MeV. The NuMI data sample currently has a large systematic errors associated with {nu}{sub e} events, but shows an indication of an excess.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Method and apparatus for faulty memory utilization

A method for faulty memory utilization in a memory system includes: obtaining information regarding memory health status of at least one memory page in the memory system; determining an error tolerance of the memory page when the information regarding memory health status indicates that a failure is predicted to occur in an area of the memory system affecting the memory page; initiating a migration of data stored in the memory page when it is determined that the data stored in the memory page is non-error-tolerant; notifying at least one application regarding a predicted operating system failure and/or a predicted application failure when it is determined that data stored in the memory page is non-error-tolerant and cannot be migrated; and notifying at least one application regarding the memory failure predicted to occur when it is determined that data stored in the memory page is error-tolerant.

97 MATHEMATICS AND COMPUTING↗

Structural basis of error-prone replication and stalling at a thymine base by human DNA polymerase

Human DNA polymerase iota (pol iota) is a unique member of Y-family polymerases, which preferentially misincorporates nucleotides opposite thymines (T) and halts replication at T bases. The structural basis of the high error rates remains elusive. We present three crystal structures of pol complexed with DNA containing a thymine base, paired with correct or incorrect incoming nucleotides. A narrowed active site supports a pyrimidine to pyrimidine mismatch and excludes Watson-Crick base pairing by pol. The template thymine remains in an anti conformation irrespective of incoming nucleotides. Incoming ddATP adopts a syn conformation with reduced base stacking, whereas incorrect dGTP and dTTP maintain anti conformations with normal base stacking. Further stabilization of dGTP by H-bonding with Gln59 of the finger domain explains the preferential T to G mismatch. A template 'U-turn' is stabilized by pol and the methyl group of the thymine template, revealing the structural basis of T stalling. Our structural and domain-swapping experiments indicate that the finger domain is responsible for pol's high error rates on pyrimidines and determines the incorporation specificity.

36 MATERIALS SCIENCE↗

Evaluation of precipitation across the contiguous United States, Alaska, and Puerto Rico in multi-decadal convection-permitting simulations

Abstract This study is an early effort to generate a multi-decadal convection-permitting regional climate dataset that covers nearly the entire North American continent. We assessed a 20 year dynamically downscaled regional climate simulation at a 4 km spatial resolution with explicit convection across the contiguous United States (CONUS), Alaska, and Puerto Rico. Specifically, we evaluated the model’s performance in representing mean, 95th percentile, and extreme precipitation across regions. Our findings indicate that when compared with ERA5 reanalysis, the forcing data, convection-permitting simulation improves representations of seasonal, 95th percentile, and extreme precipitation over a large portion of the CONUS, Alaska, and Puerto Rico, particularly in areas where precipitation is heaviest. The simulation adds value over its forcing data (ERA5) in up to 53% of all grid cells in the CONUS, 68.8% in Alaska, and 84.0% in Puerto Rico. It is important to note that, however, despite improvements, model errors in Puerto Rico remain large. Similar improvements are observed in extreme indices, including consecutive dry days, maximum 5 days precipitation, and extreme precipitation. Analysis of the diurnal cycle of mean hourly precipitation suggests that representations of convective processes—including onset, dissipation, suppression, downstream propagation, and local circulation—improved overall.

54 ENVIRONMENTAL SCIENCES↗

AGES AND METALLICITIES OF EARLY-TYPE VOID GALAXIES FROM LINE STRENGTH MEASUREMENTS

We present spectroscopic observations of 26 galaxies of type E and S0, based on their blue morphologies, located in voids by the study of Grogin and Geller in 1999. Measurements of redshift, velocity dispersion, and four Lick line indices, Mg{sub b}, Fe5270, Fe5335, and H{beta} with their errors are given for all of these galaxies, along with H{beta}, [O III], H{alpha}, and [N II] emission line strengths for a subset of these objects. These sources are brighter than M* for low-density regions and tend to be bluer than their counterpart early-type objects in high-density regions. Using the models of Thomas et al., developed in 2003, gives metal abundances and ages with a median {alpha} enhancement, [{alpha}/Fe] = +0.13, and median metal abundance, [Z/H] = +0.22, values comparable to those found for E and S0 galaxies in clusters, but with a wider spread in [Z/H] toward low values. If the emission line subsample is interpreted as younger, the proportion of young objects is higher than for early types in higher-density regions. There is a significant incidence of sources in the sample with emission lines in their spectra (46% with H{beta} and [O III] and 69% with H{alpha} or [N II]) as well as shells and rings in their morphologies (19%). The diagnostic log [N ii]/H{alpha}, log [O iii]/H{beta} diagram places 10 of 12 emission line galaxies in or near the star-forming and liner region and two among the Seyferts. The H{alpha} fluxes indicate star-formation rates of 0.2-1.0 M{sub sun} yr{sup -1}. The percentage of these early-type void galaxies undergoing star formation appears to be higher compared to their cluster counterparts and the range of ages wider.

79 ASTRONOMY AND ASTROPHYSICS↗

EMISSA (Exploring Millimeter Indicators of Solar-Stellar Activity): I. The initial millimeter–centimeter main-sequence star sample

Due to their wide wavelength coverage across the millimeter to centimeter (mm–cm) range and their increased sensitivity, modern interferometric arrays facilitate observations of the thermal and non-thermal radiation that is emitted from different layers in the outer atmospheres of stars. We study the spectral energy distribution (S obs (ν)) of main-sequence stars based on archival observations in the mm–cm range with the aim to study their atmospheric stratification as a function of stellar type. The main-sequence stars with significant detection in mm bands were identified in the ALMA Science Archive. These data were then complemented with spectral flux data in the extreme ultraviolet to cm range as compiled from various catalogues and observatory archives. We compared the resultant S obs (ν) of each star with a photospheric emission model (S mod (ν)) calculated with the PHOENIX code. The departures of S obs (ν) from S mod (ν) were quantified in terms of a spectral flux excess parameter (ΔS/S mod ) and studied as a function of stellar type. The initial sample consists of 12 main-sequence stars across a broad range of spectral types from A1 to M3.5 and the Sun-as-a-star as reference. The stars with T eff = 3000–7000 K (F–M type) showed a systematically higher S obs (ν) than S mod (ν) in the mm–cm range. Their ΔS/S mod exhibits a monotonic rise with decreasing frequency. The steepness of this rise is higher for cooler stars in the T eff = 3000–7000 K range, although the single fully convective star (T eff ~ 3000 K) in the sample deviates from this trend. Meanwhile, Sobs(ν) of the A-type stars agrees with S mod (ν) within errors. The systematically high ΔS/S mod in F–M stars indicates hotter upper atmospheric layers, that is, a chromosphere and corona in these stars, like for the Sun. The mm–cm ΔS/S mod spectrum offers a way to estimate the efficiency of the heating mechanisms across various outer atmospheric layers in main-sequence stars, and thereby to understand their structure and activity. We emphasise the need for dedicated surveys of main-sequence stars in the mm–cm range.

79 ASTRONOMY AND ASTROPHYSICS↗