Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “environments specification”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24
All sourcesNASA NTRSDOE OSTI
NASA NTRS2002

New High-Performance SiC Fiber Developed for Ceramic Composites

Sylramic-iBN fiber is a new type of small-diameter (10-mm) SiC fiber that was developed at the NASA Glenn Research Center and was recently given an R&D 100 Award for 2001. It is produced by subjecting commercially available Sylramic (Dow Corning, Midland, MI) SiC fibers, fabrics, or preforms to a specially designed high-temperature treatment in a controlled nitrogen environment for a specific time. It can be used in a variety of applications, but it currently has the greatest advantage as a reinforcement for SiC/SiC ceramic composites that are targeted for long-term structural applications at temperatures higher than the capability of metallic superalloys. The commercial Sylramic SiC fiber, which is the precursor for the Sylramic-iBN fiber, is produced by Dow Corning, Midland, Michigan. It is derived from polymers at low temperatures and then pyrolyzed and sintered at high temperatures using boron-containing sintering aids (ref. 1). The sintering process results in very strong fibers (>3 GPa) that are dense, oxygen-free, and nearly stoichiometric. They also display an optimum grain size that is beneficial for high tensile strength, good creep resistance, and good thermal conductivity (ref. 2). The NASA-developed treatment allows the excess boron in the bulk to diffuse to the fiber surface where it reacts with nitrogen to form an in situ boron nitride (BN) coating on the fiber surface (thus the product name of Sylramic-iBN fiber). The removal of boron from the fiber bulk allows the retention of high tensile strength while significantly improving creep resistance and electrical conductivity, and probably thermal conductivity since the grains are slightly larger and the grain boundaries cleaner (ref. 2). Also, as shown in the graph, these improvements allow the fiber to display the best rupture strength at high temperatures in air for any available SiC fiber. In addition, for CMC applications under oxidizing conditions, the formation of an in situ BN surface layer creates a more environmentally durable fiber surface not only because a more oxidation-resistant BN is formed, but also because this layer provides a physical barrier between contacting fibers with oxidation-prone SiC surface layers (refs. 3 and 4). This year, Glenn demonstrated that the in situ BN treatment can be applied simply to Sylramic fibers located within continuous multifiber tows, within woven fabric pieces, or even assembled into complex product shapes (preforms). SiC/SiC ceramic composite panels have been fabricated from Sylramic-iBN fabric and then tested at Glenn within the Ultra-Efficient Engine Technology Program. The test conditions were selected to simulate those experienced by hot-section components in advanced gas turbine engines. The results from testing at Glenn demonstrate all the benefits expected for the Sylramic-iBN fibers. That is, the composites displayed the best thermostructural performance in comparison to composites reinforced by Sylramic fibers and by all other currently available high-performance SiC fiber types (refs. 3 and 5). For these reasons, the Ultra-Efficient Engine Technology Program has selected the Sylramic-iBN fiber for ongoing efforts aimed at SiC/SiC engine component development.

DiCarlo, James A.↗
NASA NTRS2002

Bulk Micromachined 6H-SiC High-g Piezoresistive Accelerometer Fabricated and Tested

High-g accelerometers are needed in certain applications, such as in the study and analysis of high-g impact landings and projectiles. Also, these accelerometers must survive the high electromagnetic fields associated with the all-electric vehicle technology needed for aerospace applications. The choice of SiC is largely due to its excellent thermomechanical properties over conventional silicon-based accelerometers, whose material properties inhibit applicability in high electromagnetic radiation and high temperatures (>150 C) unless more complex and sometimes costly packaging schemes are adopted. This work was the outcome of a NASA Glenn Research Center summer internship program, in collaboration with Cornell University and the Munitions Directorate of the U.S. Air Force in Eglin, Florida. It aimed to provide the enabling technology infrastructure (modeling, fabrication, and validation) for the implementation of SiC accelerometers designed specifically for harsh environments.

Okojie, Robert S.↗
NASA NTRS1994

(abstract) Automated Constraint Checking of Spacecraft Command Sequences

Making certain that spacecraft command sequences do not violate any constraints is often tedious and expensive in terms of both personnel and software development. To reduce this cost, we have pursued the development of a flexible system for specifying models of spacecraft behavior in response to commands as well as constraints on that behavior. The potential need for modeling complex spacecraft behavior required that the system be designed to be usable both on a conventional workstation and a parallel supercomputer. Finally, it needed to be intuitive enough for the the intended mission operations users to easily design sets of rules and models to automate tedious, resource-consuming constraint checking of commands. We have defined a Specification And Verification Environment (SAVE) for spacecraft flight rules.

automation spacecraft command sequences constraint↗
NASA NTRS2011

Modeling Ionosphere Environments: Creating an ISS Electron Density Tool

The International Space Station (ISS) maintains an altitude typically between 300 km and 400 km in low Earth orbit (LEO) which itself is situated in the Earth's ionosphere. The ionosphere is a region of partially ionized gas (plasma) formed by the photoionization of neutral atoms and molecules in the upper atmosphere of Earth. It is important to understand what electron density the spacecraft is/will be operating in because the ionized gas along the ISS orbit interacts with the electrical power system resulting in charging of the vehicle. One instrument that is already operational onboard the ISS with a goal of monitoring electron density, electron temperature, and ISS floating potential is the Floating Potential Measurement Unit (FPMU). Although this tool is a valuable addition to the ISS, there are limitations concerning the data collection periods. The FPMU uses the Ku band communication frequency to transmit data from orbit. Use of this band for FPMU data runs is often terminated due to necessary observation of higher priority Extravehicular Activities (EVAs) and other operations on ISS. Thus, large gaps are present in FPMU data. The purpose of this study is to solve the issue of missing environmental data by implementing a secondary electron density data source, derived from the COSMIC satellite constellation, to create a model of ISS orbital environments. Extrapolating data specific to ISS orbital altitudes, we model the ionospheric electron density along the ISS orbit track to supply a set of data when the FPMU is unavailable. This computer model also provides an additional new source of electron density data that is used to confirm FPMU is operating correctly and supplements the original environmental data taken by FPMU.

Gurgew, Danielle N.↗
NASA NTRS2014

Facility Systems, Ground Support Systems, and Ground Support Equipment General Design Requirements

KSC-DE-512-SM establishes overall requirements and best design practices to be used at the John F. Kennedy Space Center (KSC) for the development of ground systems (GS) in support of operations at launch, landing, and retrieval sites. These requirements apply to the design and development of hardware and software for ground support equipment (GSE), ground support systems (GSS), and facility ground support systems (F-GSS) used to support the KSC mission for transportation, receiving, handling, assembly, test, checkout, servicing, and launch of space vehicles and payloads and selected flight hardware items for retrieval. This standards manual supplements NASA-STD-5005 by including KSC-site-specific and local environment requirements. These requirements and practices are optional for equipment used at manufacturing, development, and test sites.

Ground Support Systems↗
NASA NTRS2016

Constructing the 'Best' Reliability Data for the Job - Developing Generic Reliability Data from Alternative Sources Early in a Product's Development Phase

Reliability practitioners advocate getting reliability involved early in a product development process. However, when assigned to estimate or assess the (potential) reliability of a product or system early in the design and development phase, they are faced with lack of reasonable models or methods for useful reliability estimation. Developing specific data is costly and time consuming. Instead, analysts rely on available data to assess reliability. Finding data relevant to the specific use and environment for any project is difficult, if not impossible. Instead, analysts attempt to develop the "best" or composite analog data to support the assessments. Industries, consortia and vendors across many areas have spent decades collecting, analyzing and tabulating fielded item and component reliability performance in terms of observed failures and operational use. This data resource provides a huge compendium of information for potential use, but can also be compartmented by industry, difficult to find out about, access, or manipulate. One method used incorporates processes for reviewing these existing data sources and identifying the available information based on similar equipment, then using that generic data to derive an analog composite. Dissimilarities in equipment descriptions, environment of intended use, quality and even failure modes impact the "best" data incorporated in an analog composite. Once developed, this composite analog data provides a "better" representation of the reliability of the equipment or component. It can be used to support early risk or reliability trade studies, or analytical models to establish the predicted reliability data points. It also establishes a baseline prior that may updated based on test data or observed operational constraints and failures, i.e., using Bayesian techniques. This tutorial presents a descriptive compilation of historical data sources across numerous industries and disciplines, along with examples of contents and data characteristics. It then presents methods for combining failure information from different sources and mathematical use of this data in early reliability estimation and analyses.

Kleinhammer, Roger K.↗
NASA NTRS2013

The Challenges in Applying Magnetroesistive Sensors on the 'Curiosity' Rover

Magnetoresistive Sensors were selected for use on the motor encoders throughout the Curiosity Rover for motor position feedback devices. The Rover contains 28 acuators with a corresponding number of encoder assemblies. The environment on Mars provides opportunities for challenges to any hardware design. The encoder assemblies presented several barriers that had to be vaulted in order to say the rover was ready to fly. The environment and encoder specific design features provided challenges that had to be solved in time to fly.

Radioisotope Thermoelectric Gererator (RTG)↗
NASA NTRS2010

TPSAS-NF1676L-9990-DND

PVS (Prototype Veri cation System)1 is an interactive environment for the specification and verification of systems. PVS provides a strongly typed specification language, which is based on Higher-Order Logic. The type system of PVS supports: sub-typing, dependent-types, abstract data types, parametric types, records, unions, and tuples. The PVS theorem prover includes decision procedures for a variety of theories such as linear arithmetic, propositional logic, and temporal logic. This seminar will provide a gentle introduction to the basic and advanced features of PVS, including: theory interpretations, real number proving, batch proving, rapid prototyping, and strategy development. All these features are illustrated with simple examples and exercises.

César Muñoz↗
NASA NTRSDate not supplied

An Updated Secondary Lunar Meteoroid Ejecta Model for Engineering Design

Introduction: The surface of the Moon is constantly being bombarded by a flux of meteoroids of various sizes. Impacts due to these meteoroids produce secondary ejecta material at much lower speeds but with a total mass larger than the original impactor. Details about the secondary ejecta are important for planning missions on the lunar surface. In this work, an updated ejecta model is presented called the Meteoroid Model of Secondary Ejecta (MeMoSeE), to re-place the Apollo-era ejecta model, NASA SP-8013 [1], in the SLS-SPEC 159 Design Specification for Natural Environments (DSNE) [2]. The model pro-duces secondary ejecta flux environments for a user-specified location on the lunar surface, and sorts the incoming secondary flux by angular direction and speed. Methods: MeMoSeE is separated into three parts: the inputs, the conversion step, and the integration of fluxes. Inputs to the model include the primary meteoroid fluxes and the primary near-Earth object (NEO) fluxes. Meteoroid fluxes, both asteroidal and cometary, are calculated using the Meteoroid Engineering Model (MEM3) [3] for different locations on the Moon. For each surface location, an ephemeris is generated using the JPL HORIZONS System [4] that feeds into MEM3. The NEO fluxes are approximated by the high-density population of MEM3 (i.e., only the directionality), where the speed distribution of the NEO fluxes is renormalized to match observations [5]. The regolith properties are used as defined in the DSNE [2]. The conversion step utilizes scaling laws given by Housen & Holsapple 2011 [6] to convert the primary impactor flux to the total mass of secondary ejecta. The ejecta distribution, at the point-of-impact (POI), is separated into a zenith angle and azimuthal angle distribution. The zenith angle distribution follows a beta distribution where the peak depends on the impact altitude angle and the impact azimuth [7]. We employ an ejecta azimuth distribution that is based on Rival & Mandeville 1999 [8] which focuses ejecta in the downstream direction for more oblique impacts. Finally, during the integration step, we sum secondary ejecta number fluxes at a particular region-of-interest (ROI) that originated from many POI locations over the entire surface of the Moon. We keep track of both altitude and azimuth angle bins as well as a range of speed bins, following the igloo gridding as done in MEM3 [9]. The ejecta particle size distribution and density is assumed to be the same as the lunar regolith [10, 2]. Results: The primary fluxes are computed for one Metonic cycle (19 years) for various locations over the lunar surface with a fixed orientation. Both the angular and speed distributions of the primary fluxes are dependent on the latitude and longitude. The over-all primary fluxes show a roughly 13% increase from the eastern limb to the western limb. In general, the speed distribution of the secondary fluxes span from a user-defined minimum speed to the escape speed of the Moon (2.38 km/s), roughly following a power-law relation [6]. Different parts of the speed distribution come from different primary impact locations on the Moon. The secondary ejecta is dominated by the slowest speeds, where these particles originate nearby the ROI. For speeds around 71% of the escape speed, the secondary ejecta originates from locations near the antipodal point. On the other hand, for secondary ejecta speeds that exceed roughly 90% the escape speed, the ejecta particles come from all over the lunar surface to the ROI. Comparing the secondary ejecta fluxes from MeMoSeE with NASA SP-8013 [1], there is a reduction by about 2-3 orders of magnitude for secondary ejecta particles greater than 1 µg. These estimates agree with recent findings from Bjorkman & Christiansen 2019 [11]. The secondary ejecta fluxes are also compared with the primary fluxes, where the ejecta fluxes are roughly an order of magnitude greater than the primary fluxes. References: [1] Cour-Palais, B. G., (1969) NASA SP-8013. [2] NASA SLS-SPEC-159 Rev. H (2020). [3] Moorhead, A. V., et al. (2019) JS&R, 1-17. [4] Giorgini, J. D., (2015) IAUGA, 29, 2256293. [5] Moorhead, A. V., (2020) Memo OSMA/MEO/Lunar-001. [6] Housen, K. R., and Holsapple, K. A., (2011) Icarus, 211(1), 856-875. [7] Gault, D. E., and Wedekind, J. A., (1978) L&PSCP, 9, 3843-3875. [8] Rival, M., and Mandeville, J., (1999) Space Debris, 1(1), 45-57. [9] Moorhead, A. V., (2019) MEM3 User Guide. [10] Carrier, W. D., (1973) The Moon, 6(3-4), 250-263. [11] Bjorkman, M. D. & Christiansen, E. L., (2019) ODC

impacts↗
NASA NTRS1993

System Electrostatic Discharge Testing for Space Charging Caused ESD Events

This talk is about ground testing of spacecraft to determine immunity to the electrostatic discharges (ESDs) in certain Earth orbits. The particular spacecraft used as an example is the TOPEX/Poseidon spacecraft, an Earth orbiter with a 1334 km, 62 degree orbit. The talk is based on my recent experience with that spacecraft, but is an example of a generally good program. The program and this talk consist of the following elements: a discussion of the environment, showing the specific hazard areas on the spacecraft to illustrate the space charging and ESD process; spacecraft design features related to the environmental threat; the test device used for TOPEX/Poseidon; the test itself, including logistic and actions to avoid inadvertent damage to the spacecraft; and conclusions and lessons learned.

electrostatic↗
NASA NTRSDate not supplied

An Updated Secondary Lunar Meteoroid Ejecta Model for Engineering Design

The surface of the Moon is constantly being bombarded by a flux of meteoroids of various sizes. Impacts due to these meteoroids produce secondary ejecta material at much lower speeds but with a total mass larger than the original impactor. Details about the secondary ejecta are important for planning missions on the lunar surface. In this work, an updated ejecta model is presented called the Meteoroid Model of Secondary Ejecta (MeMoSeE), to replace the Apollo-era ejecta model, NASA SP-8013 [1], in the SLS-SPEC 159 Design Specification for Natural Environments (DSNE) [2]. The model produces secondary ejecta flux environments for a user-specified location on the lunar surface, and sorts the incoming secondary flux by angular direction and speed.

Secondary Ejecta↗
NASA NTRS2019

Improving SMAP freeze-thaw retrievals for pavements using effective soil temperature from GEOS-5: Evaluation against in situ road temperature data over the U.S

Seasonal freeze-thaw (FT) affects over half the northern hemisphere and impacts many key processes of the Earth System such as energy exchange, hydrology and vegetation. Nearly all past studies using spaceborne FT retrievals have focused on characterizing FT specifically for natural environments. FT in the built environment is also routinely studied and a topic of great interest, especially with regards to transportation infrastructure. Whereas natural FT process are frequently investigated using spaceborne observations, FT studies of roads are often limited to local scales, using in situ or nearby weather station data only. Comparisons between FT retrievals obtained from NASA's Soil Moisture Active Passive (SMAP) satellite and roads in Alaska (AK) and the Contiguous United States (CONUS) showed that spaceborne FT retrievals had good agreement with road data. But those results also indicated that NASA FT retrievals in CONUS were relatively too warm compared to road data. If SMAP FT retrievals were to be used for identifying FT transition timing for applications by the transportation community, it is also important for frozen conditions to be identified more accurately. This work is primarily concerned with improving frozen retrievals made in CONUS by calculating new Normalized Polarization Ratio (NPR) thresholds as compared to those currently used in SMAP FT. We found that focusing on a temporal subset of October through May for comparisons greatly improved the correlation between NPR and effective soil temperature (Teff, one of SMAP's ancillary datasets), often from about zero to 0.6. We then applied linear regression between NPR and Teff to obtain new NPR thresholds resulting in the FT-Roads (FT-R) product. NASA FT and FT-R were evaluated against road data at about 1000 locations in CONUS and a battery of different tests indicated that FT-R performed better under nearly all conditions compared to NASA FT. Overall, NASA FT accuracies were 69% and 80% for 6 am and 6 pm SMAP retrievals, while FT-R achieved accuracies of 79% and 82%. We also investigated the potential for using Teff for road FT (6 am, only) and found that those comparisons were even more accurate (84%). We've also quantified inter- and intraregional differences of SMAP FT performance and found that accuracy metrics vary over twice as much between geographic subdivisions (9%) as compared to between the states within a subdivision (4%). Most importantly, the main goal of improving the detection of in situ frozen conditions in CONUS was realized, with FT-R accurately detecting frozen conditions >50% more frequently than NASA FT.

Passive microwave↗
NASA NTRSDate not supplied

Model Validation and its Crucial Roles in Connecting Space Weather Research, Operations, and End-User Needs

Model validation is indispensable to transitioning a model from research to operations. In this presentation, we focus on the performance of models for specific operational purposes/user needs, which include careful selection of the corresponding specific Essential Space Environment Quantity (ESEQ) and a proper set of metrics. Initial results of our community-wide validation efforts under the COSPAR ISWAT Initiative with relevance to surface charging and internal charging will be shown. We will highlight processes involved in performing such tasks, such as setting up unified guidelines, data preparation, assessment using different metrics, etc. We will also present setbacks and challenges associated with such efforts so further progress can be made.

Yihua Zheng↗
NASA NTRSDate not supplied

Radiation and Fault Tolerance for Neuromorphic Computing

• The solar wind emanating from the sun is a stream of energetic electrons and protons and ions that are the primary ionizing radiation contributions. • The Earth’s magnetosphere significantly reduces radiation exposure and mutes the effects of solar flares out to 65K Km orbital altitude. • The radiation environment is highly dependent upon mission profile: for example geosynchronous orbits can see 50 times the radiation dose of a polar orbit due to reduction of atmospheric/magnetospheric shielding. • In LEO, the magnetosphere shields the Earth by creating trapped Van Allen radiation belts consisting of electrons and protons, which create a challenging radiation environment confined to specific regions. • Even for LEO, radiation dose can vary by a factor of 30 or more from a quiet sun to a solar flare. • Galactic Cosmic Rays (GCRs) are also present at very high energy, but at low rates. • Radiation effects on semiconductors are highly dependent upon particles species, energy and flux. • Therefore, radiation tolerance requirements will vary with mission profile and duration.

Space Radiation↗
NASA NTRS2023

Hot Cracking Behavior and Beam-Induced Grain Refinement in Electron Beam Freeform Fabricated Al 7075

Electron beam freeform fabrication (EBF 3 ) is a high deposition rate, wire-based directed energy deposition (DED) additive manufacturing (AM) process used to print metallic parts in a vacuum environment. While high specific strength 7xxx-series Al alloys are of interest in the aerospace and automotive industries, these alloys suffer from hot cracking issues during fusion welding and AM. In this work, linear deposits of Al 7075 were fabricated with EBF 3 to study the effects of baseplate thickness, preheat temperature, and beam focus on hot cracking behavior. Solidification cracks were observed in the first deposition layer, and by the third layer coalesced into large “macrocracks” running vertically through the build height. Fine, intergranular liquation “microcracks” appeared between macrocracks below the root of the final deposit layer fusion zone. Increasing the substrate preheat temperature from 165°C to 320°C deepened the partially melted zone and resulted in a more than twofold increase in the liquation microcrack density. Analysis of Scheil solidification diagrams revealed that fugitive losses of Zn and Mg during deposition increased the susceptibility to solidification cracking and promoted substrate liquation cracking. Focused electron beam (EB) conditions combined with a high aspect ratio elliptical raster pattern resulted in bands of refined, equiaxed grains. The refined microstructure suppressed solidification macrocracking and caused a nearly fivefold reduction in liquation crack density, demonstrating that beam-induced grain refinement may be a promising low-cost method for reducing hot cracking during AM.

aluminum↗
NASA NTRSDate not supplied

Thermal Management Challenges and Technology Options for Lunar Regenerative Fuel Cells

Regenerative Fuel Cells (RFCs) enable lunar surface hardware, from pressurized rovers to surface habitats, to survive the lunar night by providing the required energy storage with a lower mass than state of the art battery systems. RFCs consist of fuel cell and electrolyzer electrochemical stack(s), a fluidic balance of plant, and electrical balance of plant. Fuel cells operate by converting the stored chemical energy of reactants into DC electrical power, heat, and water. When supplied DC power from an available external source, electrolyzers regenerate the reactants through electrolysis. The balance of plant is a critical part of the integrated system consisting of many individual components and provides fluid pressure management and conditioning, fluid storage, and thermal management. Component technology development is required to create an RFC system that will be capable of surviving the harsh lunar environment and maximize specific energy (W-hr/kg). One critical component requiring development includes a kW-scale high flux thermal switch. The primary requirement for the thermal switch is the ability to maintain low thermal resistance with the RFC heat rejection interface during the lunar day to maximize heat rejection while switching to a high thermal resistance during the lunar night such that the RFC can conserve as much thermal energy as possible. Different technology including freeze tolerant pumped loop, passive louvers, and variable conductance heat pipes were assessed as potential solutions. NASA is exploring development options through internal and external partnerships to develop this technology critical for a spaceflight RFC system.

Energy Storage↗
NASA NTRS1976

HAL/S-FC compiler system specifications

This document specifies the informational interfaces within the HAL/S-FC compiler, and between the compiler and the external environment. This Compiler System Specification is for the HAL/S-FC compiler and its associated run time facilities which implement the full HAL/S language. The HAL/S-FC compiler is designed to operate stand-alone on any compatible IBM 360/370 computer and within the Software Development Laboratory (SDL) at NASA/JSC, Houston, Texas.

Source record↗
NASA NTRS2000

In Situ Instruments: Overview of In Situ Instruments for Deployment in Extreme Environments

This presentation reviews the design and specifications for several instruments for deployment in extreme environments. The instruments are: (1) In Situ Geochronology Instrument, (2) Laser Ablation Sampling Instrument, (3) Micro Hygrometer (4) Micro Lidar, (5) Atmospheric Electron X-Ray Spectrometer and (6) Nuclear Magnetic Resonance Spectrometer. Included in the descriptions are the contact people and the objective of each instrument.

Taylor, M.↗