Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “enhanced sampling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24
All sourcesNASA NTRSDOE OSTI
DOE OSTI2019

Enhanced strength of nano-polycrystalline diamond by introducing boron carbide interlayers at the grain boundaries

Polycrystalline diamond with high mechanical properties and excellent thermal stability plays an important role in industry and materials science. However, the increased inherent brittle strength with the increase of hardness has severely limited its further widespread application. In this work, we produced well-sintered nano-polycrystalline (np) diamond by directly sintering fine diamond powders with the boron carbide (B 4 C) additive at high pressure and high temperatures. The highest hardness value of up to ~90 GPa was observed in the np-diamond (consisting of fine grains with a size of 16 nm) by adding 5 wt% B 4 C at 18 GPa and 2237 K. Moreover, our results reveal that the produced samples have shown noticeably enhanced strength and toughness (18.37 MPa m 0.5 ) with the assistance of the soft phase at the grain boundaries, higher than that of the hardest known nano-twined diamond by ~24% and a little greater than that of the toughest CVD diamond (18 MPa m 0.5 ). We report this study offers a novel functional approach in improving and controlling the hardness and stiffness of polycrystalline diamond.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Results from the T2K Experiment on Neutrino Mixing Including a New Far Detector 𝜇-like Sample

We have made improved measurements of three-flavor neutrino mixing with 19.7⁢(16.3) × 10 20 protons on target in (anti-)neutrino-enhanced beam modes. A new sample of muon-neutrino events with tagged pions has been added at the far detector, as well as new proton and photon-tagged samples at the near detector. Significant improvements have been made to the flux and neutrino interaction modeling. T2K data continue to prefer the normal mass ordering and upper octant of sin 2 ⁡𝜃 23 with a near-maximal value of the charge-parity violating phase with best-fit values in the normal ordering of 𝛿 CP = −2.18$^{+1.22}_{−0.47}$, sin 2 ⁡𝜃 23 = 0.559$^{+0.018}_{−0.078}$ and Δ⁢𝑚$^{2}_{32}$ = (+2.506$^{+0.039}_{−0.052}$) × 10 −3 eV 2 .

CP violation↗
DOE OSTI2014

Thermoelectric study of crossroads material MnTe via sulfur doping

Here, we report thermoelectric study of crossroads material MnTe via iso-electronic doping S on the Te-site. MnTe{sub 1-x}S{sub x} samples with nominal S content of x = 0.00, 0.05, and 0.10 were prepared using a melt-quench method followed by pulverization and spark plasma sintering. The X-ray powder diffraction, scanning electron microscopy, and ZAF-corrected compositional analysis confirmed that S uniformly substitutes Te up to slightly over 2%. A higher content of S in the starting materials led to the formation of secondary phases. The thermoelectric properties of MnTe{sub 1-x}S{sub x} samples were characterized by means of Seebeck coefficient, electrical conductivity, and thermal conductivity measurements from 300 K to 773 K. Furthermore, Hall coefficient measurements and a single parabolic band model were used to help gain insights on the effects of S-doping on the scattering mechanism and the carrier effective mass. As expected, S doping not only introduced hole charge carriers but also created short-range defects that effectively scatter heat-carrying phonons at elevated temperatures. On the other hand, we found that S doping degraded the effective mass. As a result, the ZT of MnTe{sub 0.9}S{sub 0.1} was substantially enhanced over the pristine sample near 400 K, while the improvement of ZT became marginal at elevated temperatures. A ZT ∼ 0.65 at 773 K was obtained in all three samples.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2014

Influence of La substitution on ferromagnetic properties of lead free Na{sub 0.5}Bi{sub 0.5}Ti{sub 0.988}Fe{sub 0.012}O{sub 3} multiferroic system

To study the effect of La doping and processing temperature, (Na{sub 0.5}Bi{sub 0.5}){sub 1−x}La{sub x}Ti{sub 0.988}Fe{sub 0.012}O{sub 3} (NBLTF) samples have been prepared by sol-gel method by employing two approaches namely with and without mol% excess of Na and Bi. X-ray diffraction analysis confirms the formation of rhombohedral perovskite structure in these samples with minor impurity phases. However, the impurity phases of stochiometric NBLTF samples disappear on increasing the sintering temperature from 650°C to 850°C. On other hand, NBLTF samples prepared with mol% excess of Na and Bi have shown pure perovskite structure only at lower sintering temperature 650°C and also at low concentration of La ∼ 1%. Transmission electron microscope investigation shows nano crystalline formation for all NBLTF samples sintered at 850°C. The enhancement in room temperature ferromagnetism is observed in La doped NBTF samples prepared at 850°C by taking stoichiometric amount of Na and Bi during synthesis.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2014

Temperature dependent dielectric and magnetic properties of GdFe{sub 1−x}Ni{sub x}O{sub 3} (0.0 ≤ x ≤ 0.3) orthoferrites

The polycrystalline samples of GdFe{sub 1−x}Ni{sub x}O{sub 3} (x = 0.0, 0.1, 0.2, 0.3) orthoferrites are synthesized via solid state reaction route. The Rietveld fitted X-ray diffraction patterns confirm the formation of orthorhombic phase with Pbnm space group for all the samples. The dielectric measurements reveal an enhancement in dielectric constant and tangent loss with increase in both temperature as well as Nickel (Ni) substitution. Dielectric studies are also in support with the induction of delocalized charge carriers in the GdFeO{sub 3} matrix with increasing Ni doping. Magnetization versus applied field study shows the non-saturating hysteresis curves suggesting the canted type antiferromagnetic behavior in the considered orthoferrites. Moreover, the observed magnetic behavior is complex and the doping affects the magnitude of magnetization differently at 300 K and 80 K. It has further been noticed that the incorporated Ni{sup 3+} ions enhances the symmetry of the magnetization curves. The as-prepared samples may find their applications in the decoupling capacitors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2015

High energy ball milling study of Fe{sub 2}MnSn Heusler alloy

The structural and magnetic properties of as-melted and high energy ball milled alloy samples have been studied by X-ray diffraction, DC magnetization and electronic structure calculations by means of density functional theory. The observed properties are compared to that of the bulk sample. There is a very good enhancement of saturation magnetization and coercivity in the nano-sized samples as compared to bulk which is explained in terms of structural disordering and size effect.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2019

X-Ray Fluorescence Quantitative and Qualitative Analysis Using Micro Glass Beads

The fused glass bead method is the accepted 'best practice' method of preparation of samples for X-ray fluorescence (XRF) analysis. It minimizes the effects of sample heterogeneity and simplifies calibration by dissolving the sample into a uniform glass matrix. Glass fusion XRF samples are typically prepared by grinding sample powder with Lithium Tetraborate / Lithium Bromide and fusing the mixture at 1000 deg. C. In most cases sample-to-flux ratios of between 1:1 to 1:10 are used (1:1 for determination of trace elements and 1:10 for major elements). Typical sample mass consumed is in the range of 1000 to 2500 mg. It would be advantageous to reduce this sample mass in cases where the sample material is rare, valuable or highly radioactive. This study examines the effects of using lower sample-to-flux ratios and smaller fusion bead size on the detection and quantification of major and trace elements by XRF analysis. We have employed a micro fused glass bead process, using sample-to-flux ratios of 1:10, 1:15 and 1:25, to determine the effects on measurement precision, accuracy and detection limit. Objectives: - Created micro fused glass beads of a series of standards and andesite sample with sample-to-flux ratios of 1:10, 1:15 and 1:25. - Perform an qualitative analysis of the different sample-to-flux ratio micro beads and compare the results with the 1:5.3 beads routinely used at SRNL. - Quantitate the major components in the different sample-to-flux ratio micro beads using a wavelength dispersive x-ray fluorescence instrument. Advantages: - Reduce sample amount needed. - Speed up waste tank characterization. - Reduce personnel exposure. - Potential sealed source. Fused micro glass beads with sample-to-flux ratios of 1:10, 1:15 and 1:25 were created using sample amounts of 123 mg, 82 mg and 52 mg respectively. It was possible to detect most of the major oxides and some trace elements in the fused micro glass beads with different sample-to-flux ratios. The quantitative analysis showed good linear correlation between the intensity of the analysis and the concentration of the elements. Good precision and accuracy results were obtained for the majority of the major oxides in the three fused micro glass beads with different sample-to-flux ratios. Path Forward: Enhance the precision and accuracy of the method by optimizing different sample preparation steps, such as weighing and sample transfer. Continue to increase the sample-to-flux ratio to determine the minimum amount of sample needed to perform a multielement analysis. Consider the use of synthetic standards to lower the detection limit of the analysis. Used the micro bead sample preparation method to analyze radioactive samples.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2018

Spatial and temporal distribution of metal atoms and their diatomic oxide molecules in femtosecond laser-induced plasmas

Here, we investigate the distribution of atoms and diatomic metal-oxide molecules in femtosecond laser-induced plasmas generated at and after the laser beam focal plane, where non-linear phenomena give rise to the formation of a weakly ionized air plasma channel. We use direct plasma imaging and optical emission spectroscopy to study plasma expansion, and the associated physical and chemical separation processes. Plasma splitting occurs upon the interaction of the weakly ionized plasma with the sample and is accompanied by a change in the spatio-temporal distribution of the molecules and atoms compared to sampling at the focus. Furthermore, molecular emission is favored at specific locations and is enhanced over atomic emission as the sample is moved underneath the laser focus. These findings support the ability to enhance or impede the formation of molecular versus atomic species at specific spatio-temporal locations in the laser-induced plasma.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2020

Characterizing Pore-Scale Geochemical Alterations in Eagle Ford and Barnett Shale from Exposure to Hydraulic Fracturing Fluid and CO 2 /H 2 O

As demand increases for an affordable energy source that is tied to an environmental obligation to reduce greenhouse gas emissions and water usage, there is a growing consideration in shale production utilizing processes such as 1) enhancing hydrocarbon recovery via carbon dioxide (CO 2 ) flooding, 2) using CO 2 as a fracturing agent to minimize water use, and 3) storing CO 2 in depleted shale formations to mitigate emissions to the atmosphere. Understanding the geochemical reactions and alterations that occur as shale is exposed to fluids and CO 2 is necessary to develop and optimize each of these processes for field applications. While the majority of shale formations are stimulated using traditional fracturing fluid, some may be fractured using CO 2 or other non-traditional means. We examine the effect fracturing fluid has on shale and how it behaves with secondary exposure to dry CO 2 or CO 2 -saturated water using in situ Fourier Transform infrared spectroscopy (FTIR), feature relocation scanning electron microscopy (SEM), and surface area and pore size analysis using volumetric gas sorption. These techniques were performed on Eagle Ford and Barnett shale samples that were exposed to fracturing fluid and unexposed (as received). Shales that have been exposed to traditional fracturing fluid experienced two reaction fronts. The first reaction front was formed during exposure to the fracturing fluid (pH of ~1.4). A secondary reaction front was formed as a result of CO 2 -saturated fluid exposure in the form of carbonic acid (pH ~5.6). These two different reaction mechanisms drove multiple dissolution and precipitation cycles which altered petrophysical properties of the shale and could lead to a significant impact on flow pathways. FTIR showed that equilibration of carbonate dissolution and precipitation cycles could take as long as 35 days. Samples exposed to fracturing fluid showed significantly less carbonate reactivity compared to those exposed to water. Pore size analysis results indicate exposure to fracturing fluid blocked small nanopores (10-15 nm) reducing BET surface area and total pore volume. SEM results show barite precipitated heavily during exposure to fracturing fluid. It appeared that carbonic acid was able to extract sulfur from organic matter to form gypsum evaporites. The mineralogical (barite precipitation and calcite dissolution/precipitation) and pore-scale alterations observed in these samples may lead to enhancement of flow pathways for injected CO 2 or produced hydrocarbons.

04 OIL SHALES AND TAR SANDS↗
NASA NTRSDate not supplied

Development of Computational Environmental Microbiome Workflows for the Laboratory and the International Space Station

Identification of microorganisms in the spaceflight environment is critical for crew health risk assessment on the International Space Station (ISS). Since 2017, nanopore sequencing technology has been used to support thein situ identification of microbial species during spaceflight. Beginning in 2018, a culture-independent, swab-to-sequencer method was implemented onboard the ISS to provide a more thorough insight of the ISS microbiome. Eliminating microbial culture enables identification of difficult-to-culture organisms, reduces risks associated with potentially pathogenic cultures, and could significantly reduce the time from sample-to-answer. However, this molecular-based approach generates large metagenomic datasets that require substantial computational resources for analysis. To process nanopore-generated sequencing data, the JSC Microbiology Laboratory established a bioinformatics workflow on Amazon EC2 under the security guidance of the NASA Science Managed Cloud Environment (SMCE).This resource allows for the development, testing, and accessing of computational tools for processing large and complex datasets. The work described here will address the downlinking of data from the ISS, the automated pipeline developed to identify targeted bacterial and fungal organisms, and the time from sampling onboard to microbial identification. The pipelines have been enhanced to address high and low biomass samples using optimization based on sample source (air, water, or surface) and type of collection (filter, colony, or swab).The resulting microbiome data can be assessed beyond microbial identifications to gain understanding toward population changes over time, potential selective environmental pressures, and evaluating correlations with a wide range of additional data sets. Metagenome analysis pipelines in development could allow for simultaneous identification of microbial species, gene function, and gene pathways present in the environment. Beyond the ground processing, the developed analysis pipeline is currently deployed onboard the ISS to allow for near real-time assessments of the ISS microbiome. This study serves as a critical foundation for exploration missions, where rapid microbiome analyses will be required.

G. Marie Sharp↗
NASA NTRS1998

Martian Polar Region Impact Craters: Topographical Perspectives from the Mars Orbiter Laser Altimeter

The Mars Orbiter Laser Altimeter (MOLA) has acquired over 100 topographic cross-sections of impact landforms in the polar regions of Mars as part of Mars Global Surveyor (MGS) Science Phasing Orbit observations during the period from April to July, 1998. These MOLA topographic profiles offer the first three-dimensional perspectives of high latitude craters on Mars yet available, and provide evidence of landform geometries not previously recognized. Indeed, the relatively poor quality of Viking Orbiter images of many high northern latitude regions has allowed the MOLA data to provide insights into the cavities and ejecta topologies of non-degraded impact landforms that have clearly experienced interactions with condensates, either as part of their formation, or as a post-modification stage effect. Here we report a preliminary summary of the results associated with topographic measurements for a statistically significant population of impact features all of which lie north of 60N latitude. MOLA sampled four impact features with frost-related interior deposits, including the 81 km (diameter) Korolev feature. In several cases, there is evidence from near-centerline MOLA cross-sections of crater interior features (i.e., central peak or ice-dust deposits) that are anomalously large relative to the crater cavity. Central structures that make up more than 50% of the volume of a crater cavity are observed, suggesting that either substantial accumulation of mantling materials has occurred, or that crater excavation triggered production of volume-enhancing materials (ice?). Pedestal craters sampled by MOLA also attest to enhanced production of ejecta materials in high latitude terrains. For example, many of the pedestal craters suggest a volume of ejecta (Ve) to volume of cavity (Vc) ratio far in excess of 1.0 (i.e., over 3.0), even in cases where the floor of the cavity appears unfilled. Finally, the well-defined transitions between simple and complex craters observed in MOLA data for non-polar latitude impact features is not preserved at high northern latitudes (for non-degraded craters). This further suggests the role of target materials (i.e., frozen volatiles?) in the cratering process on Mars in such regions.

Garvin, J. B.↗
DOE OSTI2015

Evaluation on the Effect of Composition on Radiation Hardening and Embrittlement in Model FeCrAl Alloys

This report details the findings of post-radiation mechanical testing and microstructural characterization performed on a series of model and commercial FeCrAl alloys to assist with the development of a cladding technology with enhanced accident tolerance. The samples investigated include model alloys with simple ferritic grain structure and two commercial alloys with minor solute additions. These samples were irradiated in the High Flux Isotope Reactor (HFIR) at Oak Ridge National Laboratory (ORNL) up to nominal doses of 7.0 dpa near or at Light Water Reactor (LWR) relevant temperatures (300-400 C). Characterization included a suite of techniques including small angle neutron scattering (SANS), atom probe tomography (APT), and transmission based electron microscopy techniques. Mechanical testing included tensile tests at room temperature on sub-sized tensile specimens. The goal of this work was to conduct detailed characterization and mechanical testing to begin establishing empirical and/or theoretical structure-property relationships for radiation-induced hardening and embrittlement in the FeCrAl alloy class. Development of such relationships will provide insight on the performance of FeCrAl alloys in an irradiation environment and will enable further development of the alloy class for applications within a LWR environment. A particular focus was made on establishing trends, including composition and radiation dose. The report highlights in detail the pertinent findings based on this work. This report shows that radiation hardening in the alloys is primarily composition dependent due to the phase separation in the high-Cr FeCrAl alloys. Other radiation induced/enhanced microstructural features were less dependent on composition and when observed at low number densities, were not a significant contributor to the observed mechanical responses. Pre-existing microstructure in the alloys was found to be important, with grain boundaries and pre-existing dislocation networks acting as defect sinks, resulting in variations in the observed microstructures after irradiation. Dose trends were also observed, with increasing radiation dose promoting changes in the size and number density of the Cr-rich α' precipitates. Based on the microstructural analysis, performed tensile testing, and prior knowledge from FeCr literature it was hypothesized that the formation of the Cr-rich α' precipitates could lead to significant radiation-induced embrittlement in the alloys, and this could be composition dependent, a result which would mirror the trends observed for radiation-induced hardening. Due to the limited database on embrittlement in the FeCrAl alloy class after irradiation, a series of radiation experiments have been implemented. The overarching point of view within this report is the radiation tolerance of FeCrAl is complex, with many mechanisms and factors to be considered at once. Further development of the FeCrAl alloy class for enhanced accident tolerant applications requires detailed, single (or at least limited) variable experiments to fully comprehend and predict the performance of this alloy in LWRs. This report has been submitted as fulfillment of milestone M2FT-15OR0202321 titled, Summary report on the effect of composition on the irradiation embrittlement of Gen 1 ATF FeCrAl for the Department of Energy Office of Nuclear Energy, Advanced Fuel Campaign of the Fuel Cycle R&D program.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Miscible blends of biobased poly(lactide) with poly(methyl methacrylate): Effects of chopped glass fiber incorporation

Poly(lactide) (PLA) and poly(methyl methacrylate) (PMMA) are melt compounded with chopped glass fiber using laboratory scale twin-screw extrusion. Physical properties are examined using differential scanning calorimetry (DSC), dynamic mechanical thermal analysis (DMTA), thermogravimetric analysis (TGA), tensile testing, impact testing, X-ray computed tomography (CT) scanning, and field emission scanning electron microscopy (FE-SEM). Molecular weight is determined using gel permeation chromatography (GPC). Miscibility of the blends is implied by the presence of a single glass transition temperature and homogeneous morphology. PLA/PMMA blends tend to show positive deviations from a simple linear mixing rule in their mechanical properties (e.g., tensile toughness, modulus, and stress at break). The addition of 40 wt % glass fiber to the system dramatically increases physical properties. Across all blend compositions, the tensile modulus increases from roughly 3 GPa to roughly 10 GPa. Estimated heat distortion temperatures (HDTs) are also greatly enhanced; the pure PLA sample HDT increases from 75 degrees C to 135 degrees C. Fiber filled polymer blends represent a sustainable class of earth abundant materials which should prove useful across a range of applications.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Starch:Pectin Acidic Sachets Development for Hydroxyapatite Nanoparticles Storage to Improve Phosphorus Release

The importance of fertilizers in boosting crop production has motivated the development of novel high-performance systems capable of improving the phosphorus release in the soil. For instance, methods capable of increasing the surface area of fertilizer particles and promoting the solubilization of low-solubility compounds, including phosphates, are highly pursued. This study was aimed at synthesizing hydroxyapatite nanoparticles and investigating their solubility in relation to crystallinity, size, and morphology for phosphorous fertilizer applications. To improve the phosphate ions release, the hydroxyapatite nanoparticles were storage in biodegradable sachets composed of thermoplastic starch/pectin blends with different polymer ratios. The results showed that the smallest and less crystalline hydroxyapatite nanoparticles presented the highest solubility. After storage in polymeric thermoplastic starch:pectin sachets, solubility for all samples was greatly improved, enhancing the phosphorus release due to pH decrease, independent on the nanoparticle size, shape, and crystallinity. The results highlight that the use of acidic sachets is a valuable approach for enhancing phosphorus and other macronutrients release from fertilizers with basic surface properties, aiming at increasing agricultural crop productivity. Graphical Abstract: .

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2025

Paper or Plastic? Multiscale Material Handling Properties of Two Model Municipal Solid Waste Streams

Purpose: Municipal Solid Waste (MSW) is a potentially valuable sustainable feedstock for fuel and chemical production due to its carbon-rich content and low cost. This study aims to assess the material handling properties of paperand plastic-rich MSW feedstocks to mitigate equipment failure and processing downtime. Methods: The material handling properties of crumbled MSW feedstocks were measured using apowder rheometer with mass flow hopper calculations to assess handling performance. Inverse gas chromatography was use to measure the surface energy differences between feedstocks. Electron microscopy and Raman spectroscopy was used to evaluate microscale features that may contribute to material handling differences. Results: Plastic and paper rich feedstocks crumbled to a nominal 2 mm particle size were observed to have similar flow and handling characteristics with reasonable hopper outlets. 2 mm plastic rich crumbles, with their higher bulk density, exhibited superior flow performance. By contrast, 4 mm material required significantly larger hopper outlets, indicating poor flowability. Paper rich and 4 mm plastic rich samples displayed broad particle size distributions, which contributed to particle interlocking, jamming, and other flow issues. Electron microscopy revealed that plastic rich samples were significantly smoother, enhancing their flowability compared to the rougher, paper rich materials. Conclusions: This study establishes critical material handling baselines for processing MSW as a viable feedstock for fuel and chemical production. The findings highlight the importance of optimizing particle size and feedstock composition to improve flowability and handling performance.

09 BIOMASS FUELS↗
DOE OSTI2019

Mixed-conducting interlayer boosting the electrochemical performance of Ni-rich layered oxide cathode materials for lithium ion batteries

In this work, a unique artificial interface combing characteristics of both high ionic and electronic conductivities has been successfully constructed at the surface of Ni-rich LiNi 0·8 Co 0·1 Mn 0·1 O 2 (NCM811). The ionic conductor layer is fabricated through reacting H 3 PO 4 with the lithium residuals on the surface of NCM811 to form Li 3 PO 4 . The interface with high electronic conductivity is constructed by attaching graphene fragments to the NCM811 spherical particles. Due to the synergistic effect of the Li3PO4 coating layer and the graphene network, the modified sample (GN-LPO-NCM811) exhibits high capacity retention of 94.3% after 150 cycles at 0.5C between 3.0 and 4.3 V, while the pristine material shows a much lower retention of only 88.1%. In addition, the GN-LPO-NCM811 also presents improved cycling stability at elevated temperature of 55 °C. Even at an extremely high rate of 10C, the GN-LPO-NCM811 still remains 70% of its original capacity, while the pristine NCM811 only delivers 50% of the capacity. The stable cycling performance of GN-LPO-NCM811 is demonstrated in a full cell with graphite anode at ambient temperatures. Importantly, the thermal stability of the modified samples is also greatly enhanced. This study provides an effective method to improve the electrochemical performance of LiNi 0·8 Co 0·1 Mn 0·1 O 2 .

25 ENERGY STORAGE↗
DOE OSTI2018

Improved properties of recycled polypropylene by introducing the long chain branched structure through reactive extrusion

Highlights: • A novel approach is applied to modify recycled PP. • Long chain branched structure is introduced onto recycled PP. • The structural change of recycled PP is determined by FTIR, DSC and rheology. • The impact strength of recycled PP is obviously improved. • Inorganic fillers have no effect on the modification of recycled PP. - Abstract: An approach originated from preparing long chain branched polypropylene (PP) was applied to modify the properties of recycled PP that involved reactive extrusion to introduce a branched chain structure onto recycled PP under the assistance of chemical reaction between maleic anhydride (MAH) monomer and glycidyl methacrylate (GMA) grafts. The results from Fourier transformed infrared spectroscopy (FTIR) indicated the reaction took place during melt mixing, and the intensity of ester increased with increasing amount of MAH. Several rheological plots including complex viscosity, storage modulus, loss modulus, loss tangent and Cole-Cole plot were used to investigate the rheological properties of recycled PP and modified PP with MAH, which indicated an additional longer relaxation time that was not shown in recycled PP. The effects of branched structure on melting and crystallization behaviors were also investigated, demonstrating the branched chains acted as nucleating agent. Moreover, the branched structure of modified samples gave rise to enhance mechanical properties, especially, the higher impact strength compared with recycled PP.

36 MATERIALS SCIENCE↗