Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “electronic configurations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24
All sourcesNASA NTRSDOE OSTI
NASA NTRS1999

On Photospheric Fluorescence and the Nature of the 17.62 Angstrom Feature in Solar X-ray Spectra

The identification of the emission line feature at 17.62 Angstroms in solar x-ray spectra is re-examined. Using a Monte Carlo technique, we compute a realistic theoretical upper limit to the observed Fe L-alpha photospheric fluorescent line strength caused by irradiation from an overlying corona. These calculations demonstrate that the photospheric Fe L-alpha characteristic line is much too weak to account for the observed 17.62 Angstrom line flux. Instead, we identify this line with the configuration interaction 2s2p3p2P-2s2p6 2S transition in Fe XVIII seen in Electron Beam Ion Trap spectra and predicted in earlier theoretical work on the Fe XVIII x-ray spectrum.

Drake, Jeremy J.↗
NASA NTRS1994

Second-Order Moller-Plesset Perturbation Theory for Molecular Dirac-Hartree-Fock Wave Functions

Moller-Plesset perturbation theory is developed to second order for a selection of Kramers restricted Dirac-Hartree-Fock closed and open-shell reference wave functions. The open-shell wave functions considered are limited to those with no more than two electrons in open shells, but include the case of a two-configuration SCF reference. Denominator shifts are included in the style of Davidson's OPT2 method. An implementation which uses unordered integrals with labels is presented, and results are given for a few test cases.

Dyall, Kenneth G.↗
NASA NTRS2012

An Inter-Comparison of Two Independent Site Test Interferometers Located in Goldstone, California: Initial Study Results

Site Test Interferometers (STIs) have been deployed at two different locations at the NASA Deep Space Network (DSN) tracking complex in Goldstone, California. An STI measures the difference in path length between a geostationary satellite and two antennas on the Earth, producing a measure of atmospheric phase fluctuations over spatial distances comparable to those between elements of possible microwave phased arrays. The purposes of the Goldstone STIs are to assess the suitability of Goldstone as an array site and to statistically characterize atmospheric induced delay fluctuations for application to future array scenarios.The two STI's are separated by 13 km across the Goldstone complex. Each instrument is composed of two small-diameter antennas and associated electronics separated by approx. 200 meters in a principally east-west configuration. The antennas continuously observe signals emitted by geo-stationary satellites and produce data that contain information on the phase difference between signals received by both antennas. The fluctuation in delay (or path length difference) statistics derived from these data sets can be used to infer power loss for particular array configurations.We report on a comparison of the root mean square (RMS) phase delay statistics estimated over 10-minute intervals between the two Goldstone STIs. We have achieved good statistical agreement between the data acquired from the two STIs, given that each instrument is observing different satellites, at different frequencies, over different baseline lengths, with very different implementations, and are located 13 km apart in widely separated terrain at different geodetic altitudes.

propagation↗
NASA NTRS2017

Experimental Evaluation of Acoustic Engine Liner Models Developed with COMSOL Multiphysics

Accurate modeling tools are needed to design new engine liners capable of reducing aircraft noise. The purpose of this study is to determine if a commercially-available finite element package, COMSOL Multiphysics, can be used to accurately model a range of different acoustic engine liner designs, and in the process, collect and document a benchmark dataset that can be used in both current and future code evaluation activities. To achieve these goals, a variety of liner samples, ranging from conventional perforate-over-honeycomb to extended-reaction designs, were installed in one wall of the grazing flow impedance tube at the NASA Langley Research Center. The liners were exposed to high sound pressure levels and grazing flow, and the effect of the liner on the sound field in the flow duct was measured. These measurements were then compared with predictions. While this report only includes comparisons for a subset of the configurations, the full database of all measurements and predictions is available in electronic format upon request. The results demonstrate that both conventional perforate-over-honeycomb and extended-reaction liners can be accurately modeled using COMSOL. Therefore, this modeling tool can be used with confidence to supplement the current suite of acoustic propagation codes, and ultimately develop new acoustic engine liners designed to reduce aircraft noise.

Schiller, Noah H.↗
NASA NTRS2003

Electron Collisional Excitation Rates for OI USING the B-Spline R-Matrix Approach

The B-spline R-matrix approach has been used to calculate electron collisional excitation strengths and rates for transitions between the 3P, 1D, and 1S states of ground configuration and from these states to the states of the excited 2s(sup 2)2p(sup 3)ns (n = 3-5), 2s(sup 2)2p(sup 3)np (n = 3-4), 2s(sup 2)2p(sup 3)nd (n = 3-4), 2s(sup 2)2p(sup 3)4f, and 2s2p(sup 5) configurations. The nonorthogonal orbitals are used for an accurate description of both the target wave functions and the R-matrix basis functions. The thermally averaged collision strengths are obtained from the collision strengths by integrating over a Maxwellian velocity distribution of electron energies, and these are tabulated over a temperature range from 1000 to 60,000 K. The parametric functions of scaled energy have also been obtained to represent collision strengths over a wide energy range or thermally averaged collision strengths at any desired temperature.

Zatsarinny, O.↗
NASA NTRS2002

Theoretical Study of Tautomerization Reactions for the Ground and First Excited Electronic States of Adenine

Geometrical structures and energetic properties for different tautomers of adenine are calculated in this study, using multi-configurational wave functions. Both the ground and the lowest singlet excited state potential energy surfaces are studied. Four tautomeric forms are considered, and their energetic order is found to be different on the ground and the excited state potential energy surfaces. Minimum energy reaction paths are obtained for hydrogen atom transfer (tautomerization) reactions in the ground and the lowest excited electronic states. It is found that the barrier heights and the shapes of the reaction paths are different for the ground and the excited electronic states, suggesting that the probability of such tautomerization reaction is higher on the excited state potential energy surface. This tautomerization process should become possible in the presence of water or other polar solvent molecules and should play an important role in the photochemistry of adenine.

Salter, Latasha M.↗
NASA NTRS1990

Molecular Electronic Shift Registers

Molecular-scale shift registers eventually constructed as parts of high-density integrated memory circuits. In principle, variety of organic molecules makes possible large number of different configurations and modes of operation for such shift-register devices. Several classes of devices and implementations in some specific types of molecules proposed. All based on transfer of electrons or holes along chains of repeating molecular units.

Beratan, David N.↗
NASA NTRS1978

A theoretical study of the electronic transition moment for the C2 Swan band system

Large-scale self-consistent-field plus configuration-interaction calculations have been performed for the a 3Pi u and d 3Pi g states of C2. The theoretical potential curves are in good agreement with those found by a Klein-Dunham analysis of measured molecular constants in terms of shape and excitation energy. The sum of the squares of the theoretical transition moments between the states at 2.44 bohr is 4.12 a.u. which agrees with the results of shock tube measurements. The variation in the sum of the squares of the theoretical moments with internuclear separation agrees with the values of Danylewych and Nicholls (1974). Based on the data for C2 and mother molecules, it is suggested that CI calculations using near Hartree-Fock quality Slater basis sets produce highly reliable transition moments.

Arnold, J. O.↗
NASA NTRS1979

Capturing and tracking performance of the horizontal guidance and control systems of the terminal configured vehicle

A twin-jet commercial transport equipped with digital navigation, guidance, and control systems and advanced electronic display system was used for airborne operational research. The results of flight tests which evaluated a second-order horizontal-path guidance control law and the autopilot and airplane response are presented. This evaluation was accomplished through analysis of recorded flight data and through pilot opinion of the airplane maneuvers during automatic path-capture scenarios and path tracking. Four different path captures were flown at a ground speed of approximately 160 knots and repeated at approximately 300 knots. Path tracking tracking error was measured in terms of cross track error along two paths: one pat at cruise speeds and one at airport-terminal-area speeds. The path tracking accuracy and the smoothness of the airplane maneuvers were judged satisfactory for high speeds; however, at lower speeds the control law design should be improved so that tracking will be more accurate for operations in the airport terminal area.

Knox, C. E.↗
NASA NTRS1990

Solid-state reprogrammable analog resistive devices for electronic neural networks

The fabrication and performance of WO3-based, solid-state, three-terminal device configurations as programmable analog memory elements are reported. These transistorlike device structures exhibit good resistance progammability with a remarkable resolution of a few percent of the resistive strength over a four orders of magnitude dynamic range. The most critical component of these devices is an insulating layer between the active WO3 and the cation donor layer. The progamming characteristics and operation mechanisms of the device are described, and probable reaction mechanisms critical to the device stability are discussed.

Ramesham, R.↗
NASA NTRS1986

Plasma waves in magnetotail flux ropes

The plasma waves associated with the magnetotail flux ropes of December 28, 1982, December 30, 1982, and March 25, 1983, originally identified by Sibeck et al. (1984) are studied. Broadband electrostatic noise was found in the sheaths and cores of all three flux ropes. The frequency range extended from about 100 Hz to the local electron plasma frequency. The electric field vector tended to be aligned either parallel or antiparallel to the local magnetic field direction throughout the complex flux rope magnetic field configuration. The March 25, 1983, flux rope also contained an intense band of whistler mode noise extending up to one half the local electron cyclotron frequency. The superthermal electrons generating the observed whistler mode noise may have had highly anisotropic pitch angle distributions.

Kennel, C. F.↗
NASA NTRS1990

An Ab Initio Study of the Low-Lying Doublet States of AgO and AgS

Spectroscopic constants (D(sub o), r(sub e), mu(sub e), T(sub e)) are determined for the doublet states of AgO and AgS below approx. = 30000/cm. Large valence basis sets are employed in conjunction with relativistic effective core potentials (RECPs). Electron correlation is included using the modified coupled-pair functional (MCPF) and multireference configuration interaction (MRCI) methods. The A(sup 2)Sigma(sup +) - X(sup 2)Pi band system is found to occur in the near infrared (approx. = 9000/cm) and to be relatively weak with a radiative lifetime of 900 microns for A(sup 2)Sigma(sup +) (upsilon = 0). The weakly bound C(sup 2)Pi state (our notation), the upper state of the blue system, is found to require high levels of theoretical treatment to determine a quantitatively accurate potential. The red system is assigned as a transition from the C(sup 2)Pi state to the previously unobserved A(sup 2)Sigma(sup +) state. Several additional transitions are identified that should be detectable experimentally. A more limited study is performed for the vertical excitation spectrum of AgS. In addition, a detailed all-electron study of the X(sup 2)Pi and A(sup 2)Sigma(sup +) states of AgO is carried out using large atomic natural orbital (ANO) basis sets. Our best calculated D(sub o) value for AgO is significantly less than the experimental value, which suggests that there may be some systematic error in the experimental determination.

Bauschlicher, Charles W., Jr.↗
NASA NTRS1983

Evaluation of the emission capabilities of Spindt-type field emitting cathodes

The electron emitting capabilities of Spindt-type field emitting cathodes (FEC) are being studied at the Lewis Research Center, NASA. These cathodes, having 5000 emitting points in a 1 mm diameter, have been shown to be capable of emission current densities of 10 A/sq cm and higher. The purposes of this study are to (1) demonstrate that the cathodes can be processed and used in a tube-type configuration, (2) determine whether, at a sufficiently high current density, the cathode can operate in the space charge mode, and (3) evaluate failure mechanisms in this unique type of electron emitter. FEC's have been tested in a diode configuration, by the use of pulse techniques, up to current densities of 6 A/sq cm and anode potentials of 3000 V. Space charge effects have been observed in the range of 5 A/sq cm as an apparent linear increase of cathode current with anode voltage for a constant emitter-gate potential. Failed cathodes were studied by means of scanning electron microscopy and the major failure modes encountered are attributed to gas evolution, followed by arcing, which destroys either individual emitters or a large segment of the cathode area.

Forman, R.↗
NASA NTRS2021

Comprehensive Laboratory Measurements Resolving the LMM Dielectronic Recombination Satellite Lines in Ne-like Fe XVII Ions

We investigated experimentally and theoretically dielectronic recombination (DR) populating doubly excited configurations 3l3l¢ (LMM) in Fe XVII, the strongest channel for soft X-ray line formation in this ubiquitous species. We used two different electron beam ion traps and two complementary measurement schemes for preparing the Fe XVII samples and evaluating their purity, observing negligible contamination effects. This allowed us to diagnose the electron density in both EBITs. We compared our experimental resonant energies and strengths with those of previous independent work at a storage ring as well as those of configuration interaction, multiconfiguration Dirac–Fock calculations, and many-body perturbation theory. This last approach showed outstanding predictive power in the comparison with the combined independent experimental results. From these we also inferred DR rate coefficients, unveiling discrepancies from those compiled in the OPEN-ADAS and AtomDB databases.

Filipe Grilo↗
NASA NTRS1973

Tracking Data Relay Satellite System (TDRSS) VHF propagation study

A study performed to investigate the use of the Bent Ionospheric Model in computing corrections to the range and range rate measurements of the TDRSS satellites is documented. Several orbital configurations between the two satellites are discussed as to their effects on total electron content along the radio path between the satellites. Problem areas in the accurate computation of total electron content and range rate corrections are also discussed. The Bent Ionospheric Model gives the electron density versus height profile as a function of latitude, longitude, height, time, season, and solar flux.

Schleicher, L. A. H.↗
NASA NTRS1977

Evaluation of thermal soak times

A mathematical model for the heat transfer within the electronics package of a Chaparral missile was performed. The Grashof number for this configuration was less than 2000 which indicated that the primary mode of heat transfer was conduction. The Vodicka theory for heat conduction in laminated composite media was utilized to obtain the solution for the model.

Mulholland, G. P.↗
NASA NTRS1980

Quasi-projection-operator calculation of autoionization states of O5/+/ /O VI/ and Si11/+/ /Si XII/

A practical approach to calculating diagnostic parameters includes both scattering and statelike (autoionization) elements. The paper presents inelastic quasi-projection-operator calculations of autoionization states of the three-electron ions of oxygen and silicon for states below the n = 3 manifod of the respective two-electron parent (O VI and Si XII). Wave functions containing up to 40 configurations are calculated. The O VI calculated results agree with experimental results within the experimental error (about + or - 2 eV) while for the Si XII case, it was necessary to include relativistic effects. Where formulas are available (states for which p + q = 2), the Si XII results are also in good agreement with experimental results for 2Se, 2Po, and 2De states. Since the calculated results for some of the higher states did not agree with identifications proposed by Trabert et al. (1979), alternative identifications are suggested.

Wakid, S.↗
NASA NTRS1983

The effect of cell design and test criteria on the series/parallel performance of nickel cadmium cells and batteries

Three batteries were operated in parallel from a common bus during charge and discharge. SMM utilized NASA Standard 20AH cells and batteries, and LANDSAT-D NASA 50AH cells and batteries of a similar design. Each battery consisted of 22 series connected cells providing the nominal 28V bus. The three batteries were charged in parallel using the voltage limit/current taper mode wherein the voltage limit was temperature compensated. Discharge occurred on the demand of the spacecraft instruments and electronics. Both flights were planned for three to five year missions. The series/parallel configuration of cells and batteries for the 3-5 yr mission required a well controlled product with built-in reliability and uniformity. Examples of how component, cell and battery selection methods affect the uniformity of the series/parallel operation of the batteries both in testing and in flight are given.

Halpert, G.↗