SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
A new method of determination of meteor flux density distribution over the celestial sphere is discussed. The flux density was derived from observations by radar together with measurements of angles of arrival of radio waves reflected from meteor trails. The role of small meteor showers over the sporadic background is shown.
The transfer of solar irradiance in plane parallel and broken cloud fields is modeled using a Monte Carlo method. The angular distribution pattern of radiances exiting the cloud layer is studied with varying cloud geometries, optical thicknesses, cloudiness and solar zenith angles. A rather large anisotropy of the reflected flux is found, usually increasing with solar zenith angle and with patterns that strongly depend on cloud geometry. The main features are: a local maximum of reflected intensity in the forward direction for all cases; a limb darkening for the plane parallel case; and a limb brightening and a local maximum of reflected intensity in the backward direction for broken clouds. The method is used to study the cloud reflectance sensitivity to various parameters. A more precise description of cloud field internal and external structure is needed in order to obtain accurate bi directional reflectance diagrams.
This paper deals with the application of photoelastic methods to glass fiber reinforced plastics. The basic principles governing the photoelastic response in birefringent orthotropic composites are briefly reviewed. Then, three important aspects of photo-orthotropic elasticity, namely, photoelastic calibration, separation of principal stresses, and application to problems of engineering importance, are considered in detail. A new calibration specimen is proposed for determining the three independent photoelastic constants: an orthotropic half-plane subjected to a concentrated edge load. From the isochromatic response, the three stress-fringe values can be obtained by a least-squares procedure based on the theoretical stress distribution. Next, four methods of separating the principal stresses in birefringent composite models are proposed: the method of drilling small holes at the points of interest, the method of oblique incidence, the method of combining the transmitted photoelastic response with the reflected photoelastic response, and the method of birefringence dispersion.
Clouds play a key role in regulating the hydrological cycle and the Earth's radiative energy budget. However, global climate models (GCMs) with a horizontal grid spacing on the order of 100 km have limitations in representing sub-grid cloud dynamics with spatial scales on the order of 1 km, leading to potential uncertainties in cloud radiative feedback on the global scale. In our research, we will leverage the capabilities of Deep Machine Learning (DML) methods to construct parameterizations of sub-grid volumetric cloud fraction (VCF), which is the frequency of occurrence on a grid volume accumulated in the horizontal and vertical directions. Our investigation delves into the intricate relationship between VCF obtained from the NASA CALIPSO-CloudSat-CERES-MODIS (CCCM) satellite observation data and 3-D MERRA-2 reanalysis meteorological profiling data (e.g., wind, relative humidity, temperature). Through a comprehensive one-year data training utilizing the Sequence to Sequence DML method, we have successfully disentangled the complicated cloud formation dynamics across diverse meteorological conditions through a day-to-day analysis framework. Preliminary findings reveal promising statistical agreements in geographical and vertical distributions and seasonal variations of volumetric cloud fraction between ML prediction and satellite measurements. These results underscore the aptitude of our DML model to discern underlying cloud physical processes and accurately represent sub-grid cloud formation dynamics. Additionally, we have also employed trained neural network to analyze uncertainties arising from errors in meteorological data, further enhancing the robustness of our VCF parameterization.
The current density and energy spectrum of escaping electrons generated in a uniform plane slab target which is being irradiated by the gamma flux field of a nuclear reactor are calculated by using experimental gamma energy transfer coefficients, electron range and energy relations, and escape probability computations. The probability of escape and the average path length of escaping electrons are derived for an isotropic distribution of monoenergetic photons. The method of estimating the flux and energy distribution of electrons emerging from the surface is outlined, and a sample calculation is made for a 0.33-cm-thick tungsten target located next to the core of a nuclear reactor. The results are to be used as a guide in electron beam synthesis of reactor experiments.
This final report for the project discusses the attempts to model, using different methods, microwave image reconstruction. Maximum Entropy Method was not successful. Attempts to use Singular Value Decomposition (SVD) got some good results after initial failure. SVD is based upon a theory of linear algebra, to the effect that any M X N Matrix A whose number of rows M is greater than or equal to its number of columns, N can be written as the product of an M X N column-orthogonal matrix U, an N X N diagonal Matrix, W, with m positive or zero elements (the singular values) and the transposition of an N X N orthogonal matrix V. In microwave imaging, the scattered fields can be expressed by the induced current distribution. The SVD method required more contiguous computer memory than was available. Work was also done on the Conjugate Gradient Method (CGM), which didn't work well when tried earlier. It was found that separation of the imaginary part and the real part during calculation may work. This work was considered incomplete as of the end of the grant period.
Gossamer systems are mostly composed of support structures formed by highly flexible, long tubular elements and pre-tensioned thin-film membranes. These systems offer order-of-magnitude reductions in mass and launch volume and will revolutionize the architecture and design of space flight systems that require large in-orbit configurations and apertures. A great interest has been generated in recent years to fly gossamer systems on near-term and future space missions. Modeling and analysis requirements for gossamer structures are unique. Simulation of in-space performance issues of gossamer structures, such as inflation deployment of flexible booms, formation and effects of wrinkle in tensioned membranes, synthesis of tubular and membrane elements into a complete structural system, usually cannot be accomplished by using the general-purpose finite-element structural analysis codes. This has led to the need of structural modeling and analysis capabilities specifically suitable for gossamer structures. The Distributed Transfer Function Method (DTFM) can potentially meet this urgent need. Additional information is contained in the original extended abstract.
The joint distribution (as n tends to infinity) of the maxima of a sample of n independent observations of a bivariate random variable (X,Y) is studied. A method is developed for deriving the asymptotic distribution of the maxima, assuming that X and Y possess asymptotic extreme-value distributions and that the probability element dF(x,y) can be expanded in a canonical series. Applied both to the bivariate normal distribution and to the bivariate gamma and compound correlated bivariate Poisson distributions, the method shows that maxima from all these distributions are asymptotically uncorrelated.
A method to estimate raindrop size distribution (DSD) parameters from a combined Zm profile and path-integrated attenuation is shown, and a test result of the method using the data from an aircraft experiment is presented. The 'semi' dual-parameter (SDP) measurement is employed to estimate DSD parameters using the data obtained from an aircraft experiment conducted by Communications Research Laboratory, Tokyo, in conjunction with NASA. The validity of estimated DSD parameters is examined using measured Ka-band radar reflectivities. The estimated path-averaged N(0) is consistent with the Ka/X Ze ratio, and the use of estimated DSD shows excellent agreement between the rain rates estimated from the X-band and K-band Zes. The feasibility of estimating DSD parameters from space is confirmed.
Bernoulli distribution and Monte Carlo method for electrical load analysis in designing electric power generation and distribution
External and internal pressure and cold-wall heating-rate distributions were obtained in hypersonic flow on a full-scale heat-sink representation of the space shuttle orbiter wing-elevon-cove configuration in an effort to define effects of flow separation on cove aerothermal environment as a function of cove seal leak area, ramp angle, and free-stream unit Reynolds number. Average free-stream Mach number from all tests was 6.9; average total temperature from all tests was 3360 R; free-stream dynamic pressure ranged from about 2 to 9 psi; and wing angle of attack was 5 deg (flow compression). For transitional and turbulent flow separation, increasing cove leakage progressively increased heating rates in the cove. When ingested mass flow was sufficient to force large reductions in extent of separation, increasing cove leakage reduced heating rates in the cove to those for laminar attached flow. Cove heating-rate distributions calculated with a method that assumed laminar developing channel flow agreed with experimentally obtained distributions within root-mean-square differences that varied between 11 and 36 percent where cove walls were parallel for leak areas of 50 and 100 percent.
Study of melting of dispersed or packed solid particles in a fluid under gravity and microgravity conditions provides benchmark information for many engineering applications such as material processing, environmental assessment and protection and space fire protection. During such processes, packed or dispersed solid particles are interacting with fluid flow at above-melting temperatures. By unmasking the buoyancy effects in coupled flow, phase change and heat transport phenomena, a better understanding of melting rate in non-thermal equilibrium, convective conditions can be studied. A series of flight experiments were conducted onboard the NASA KC-135 Microgravity Research Airplane. The Particle Melting in Plow (PMF) module was designed to allow flow through the initially packed ice particles at controlled temperature and velocity. To achieve this, a close-loop flow system was designed. Video images were taken to record the visualization of the melting process, from which a time variation of packed particle thickness distribution at different times can be obtained by the image analysis method. The fluid temperature distribution within the melting zone is measured by thermocouples. An infrared camera was mounted from the top of the test section to record the ice-water thermal images at a given location. The results from thermal images yield local temperature variation between melting solid and liquid and local Stephan number. Typical results for a number of cases are presented. The mathematical model, describing mass, energy, and momentum balance equations for the liquid and solid phases, is presented. It is found that melting rate is influenced mainly by the ratio of Reynolds number (based on the initial particle diameter) to the Froud number, and Stephan number. At the absence of gravity, Froud number approaches zero, Reynolds number and Stephan number become dominant factors governing the melting rate. The numerically determined results are compared with the experimental ones. It is found that the discrepancy between the predicted and measured melting rate is largely due to the inaccuracy in the constitutive equations for effective thermal physical properties, such as effective thermal conductivity and diffusivity, and transport properties, such as particle interaction coefficient, and local heat transfer coefficient of particles.
Newer instruments and communications techniques have given scientists unprecedented amounts of data, more than can be feasibly distributed through traditional methods such as mailed CD-ROM's. Leveraging the web makes sense since it enables scientists to request specific data and retrieve products as soon as they're available. Yet defining the middleware system to support such an application has remained just out of reach, until Odyssey. For the first time ever, data from all Odyssey mission instruments were made available through a single system immediately upon delivery to the Planetary Data System (PDS). The Object Oriented Data Technology (OODT) software made such an application possible.
A quasi-isentropic back trajectory scheme is applied to output from the Modern Era Retrospective-analysis for Research and Applications and a land-only replay with corrected precipitation to estimate surface evaporative sources of moisture supplying precipitation over every ice-free land location for the period 1979-2005. The evaporative source patterns for any location and time period are effectively two dimensional probability distributions. As such, the evaporative sources for extreme situations like droughts or wet intervals can be compared to the corresponding climatological distributions using the method of relative entropy. Significant differences are found to be common and widespread for droughts, but not wet periods, when monthly data are examined. At pentad temporal resolution, which is more able to isolate floods and situations of atmospheric rivers, values of relative entropy over North America are typically 50-400 larger than at monthly time scales. Significant differences suggest that moisture transport may be the key to precipitation extremes. Where evaporative sources do not change significantly, it implies other local causes may underlie the extreme events.
A method by which the apparent microwave temperature characteristic of a flat scene is estimated from dual polarized measurements is derived and interpreted. Approximate linear relationships between antenna and apparent temperatures are established by weighting emission components in spherical bands under the assumption that the surface is isotropic. The weighting factors are formed by integrating the antenna pattern functions over these bands. The vector aspect of the formulation is retained to account for the difference between the definition of the antenna polarizations and the polarizations of the emitted fields. The method is largely applicable to the measurement of smooth temperature distributions by an antenna having good spatial resolution of the distributions and is considered efficient for inverting large volumes of measurements. Sample cases are presented and the implications of these cases on remote radiometer observations are discussed. It is shown that cross-coupling occurs between the polarizations of the emitted fields and the polarizations of the antenna. For this reason and because practical antennas have cross-polarized patterns associated with them, it is necessary to conduct measurements at both horizontal and vertical polarizations to realize the inversion. It is also made evident that thorough inversions require that the apparent temperatures be sampled at a sufficient number of points between nadir and zenith.
A method for determining the dependence of radar backscatter on incidence angle that is applicable to the region corresponding to a particular radar image is derived. The method is based on enforcing mathematical consistency between the frequency distribution of the images' pixel signals and a one-dimensional frequency distribution of slope component, which is obtained from a radar or laser altimetry profile in or near the imaged area. To test the resulting algorithm, an arbitrarily selected reflectance function is used to generate an artificial radar image from a digitized topographic map of the Lake Champlain West quadrangle in the Adirondack Mountains, U.S. It is found that, for 99 percent of the data, the maximum error is 1 degree.
It is well-established that sampling and sample processing can easily introduce contamination into dissolved trace element samples if precautions are not taken. However, work in remote locations sometimes precludes bringing bulky clean lab equipment into the field and likewise may make timely transport of samples to the lab for processing impossible. Straightforward syringe filtration methods are described here for collecting small quantities (15 mL) of 0.45- and 0.02-microm filtered river water in an uncontaminated manner. These filtration methods take advantage of recent advances in analytical capabilities that require only small amounts of waterfor analysis of a suite of dissolved trace elements. Filter clogging and solute rejection artifacts appear to be minimal, although some adsorption of metals and organics does affect the first approximately 10 mL of water passing through the filters. Overall the methods are clean, easy to use, and provide reproducible representations of the dissolved and colloidal fractions of trace elements in river waters. Furthermore, sample processing materials can be prepared well in advance in a clean lab and transported cleanly and compactly to the field. Application of these methods is illustrated with data from remote locations in the Rocky Mountains and along the Yukon River. Evidence from field flow fractionation suggests that the 0.02-microm filters may provide a practical cutoff to distinguish metals associated with small inorganic and organic complexes from those associated with silicate and oxide colloids.
An airfoil design procedure is described that was incorporated into an existing 2-D Navier-Stokes airfoil analysis method. The resulting design method, an iterative procedure based on a residual-correction algorithm, permits the automated design of airfoil sections with prescribed surface pressure distributions. The inverse design method and the technique used to specify target pressure distributions are described. It presents several example problems to demonstrate application of the design procedure. It shows that this inverse design method develops useful airfoil configurations with a reasonable expenditure of computer resources.