Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “cumulative”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

Solar flare protection for manned lunar missions - Analysis of the October 1989 proton flare event

Several large solar proton events occurred in the latter half of 1989. For a moderately shielded spacecraft in free space, the potential exposure would have been greatest for the flare which occurred between October 19 to 27, 1989. The temporal variations of the proton energy spectra at approximately 1 AU were monitored by the GOES-7 satellite. These data, recorded and processed at the NOAA-Boulder Space Environment Laboratory, provide the opportunity to analyze dose rates and cumulative doses which might be incurred by astronaus in transit to, or on, the moon. Of particular importance in such an event is the time development of exposure in the early phases of the flare, for which dose rates may range over many orders of magnitude in the first few hours. The cumulative dose as a function of time for the entire event is also predicted. In addition to basic shield calculations, dose rate contours are constructed for flare shelters in free-space and on the lunar surface.

Simonsen, Lisa C.↗
NASA NTRS1992

Classification of mafic clasts from mesosiderites - Implications for endogenous igneous processes

Results are presented from an analysis of 13 igneous pebbles from the Vaca Muerta, EET87500, and Bondoc mesosiderites, using electron microprobe and instrumental neutron activation techniques. These data, combined with literature data on compositions of 43 mesosiderite clasts were used to compile a classification scheme for the various types of mafic silicate clasts that occur in mesosiderites. These clasts were classified into five principal groups: (1) polygenic and monogenic cumulates (30 percent); (2) polygenic basalts (30 percent); (3) quench-textured rocks, comprising two compositional subgroups (those which resemble basaltic eucrites (5 percent), and those which resemble cumulate eucrites (2 percent)); (4) monogenic basalts (11 percent); and (5) ultramafic rocks, consisting mainly of large crystals of orthopyroxene (9 percent) or olivine (4 percent). The conditions under which these clasts were formed are discussed.

Rubin, Alan E.↗
NASA NTRS1992

Radiation dose to critical body organs for October 1989 proton event

The Geostationary Operational Environmental Satellite (GOES-7) provides high-quality environmental data about the temporal development and energy characteristics of the protons emitted during a solar particle event. The GOES-7 time history of the hourly averaged integral proton flux for various particle kinetic energies are analyzed for the solar proton event occurring October 19-29, 1989. This event is similar to the August 1972 event that has been widely studied to estimate free-space and planetary radiation-protection requirements. By analyzing the time-history data, the dose rates, which can vary over many orders of magnitude in the early phases of the flare, can be estimated as well as the cumulative dose as a function of time. When basic transport results are coupled with detailed body organ thickness distributions calculated with the Computerized Anatomical Man and Computerized Anatomical Female models, the dose rates and cumulative doses to specific organs can be predicted. With these results, the risks of cancer incidence and mortality are estimated for astronauts in free space protected by various water shield thicknesses.

Simonsen, Lisa C.↗
NASA NTRS1993

An approach to estimate the areal rain-rate distribution from spaceborne radar by the use of multiple thresholds

Estimates of rain rate derived from a spaceborne weather radar will be most reliable over an intermediate range of values. In forming an area average of the rain rate, an alternative to the averaging of the high-resolution estimates, irrespective of their individual accuracies, is a multiple threshold approach. The method is based on the fact that the fractional area above a particular rain-rate threshold R(j) is related to the cumulative distribution of rain rates evaluated at R(j). Varying the threshold over the effective dynamic range of the radar yields the cumulative distribution function over this range. To obtain the distribution at all rain rates, a lognormal or gamma test function is selected such that the mean-square error between the test function and the measured values is minimized. Once the unknown parameters are determined, the first-order statistics of the areawide rain-rate distribution can be found. Tests of the method with data from the SPANDAR radar provide comparisons between it and the single threshold and the direct averaging approaches.

Meneghini, R.↗
NASA NTRS1993

On predicting contamination levels of HALOE optics aboard UARS using direct simulation Monte Carlo

A three-dimensional version of the direct simulation Monte Carlo method is adapted to assess the contamination environment surrounding a highly detailed model of the Upper Atmosphere Research Satellite. Emphasis is placed on simulating a realistic, worst-case set of flowfield and surface conditions and geometric orientations in order to estimate an upper limit for the cumulative level of volatile organic molecular deposits at the aperture of the Halogen Occultation Experiment. Problems resolving species outgassing and vent flux rates that varied over many orders of magnitude were handled using species weighting factors. Results relating to contaminant cloud structure, cloud composition, and statistics of simulated molecules impinging on the target surface are presented, along with data related to code performance. Using procedures developed in standard contamination analyses, the cumulative level of volatile organic deposits on HALOE's aperture over the instrument's 35-month nominal data collection period is estimated to be about 2700A.

Woronowicz, Michael S.↗
NASA NTRS1993

Estimating risk for earth-satellite attenuation prediction

Annual cumulative distributions of attenuation measurements and of rain-rate measurements were obtained from several locations in Europe and the United States. They were analyzed to estimate the year-to-year variability to be associated with a prediction of the expected cumulative distribution. Two models were constructed to estimate variability, an ad hoc model that summarized a number of observations when compared to model predictions and a probabilistic model that applied the ideas of order statistics to the prediction problem when the number of independent attenuation or rain-rate events in a sample year could be estimated. Based on these models, the statistical uncertainty in a model prediction may be estimated. The estimation procedure also provides an answer to the question of the number of years of observation needed to provide an estimate of the empirical distribution with a specified statistical uncertainty.

Crane, Robert K.↗
NASA NTRS1991

Probabilistic micromechanics and macromechanics of polymer matrix composites

A probabilistic evaluation of an eight ply graphite-epoxy quasi-isotropic laminate was completed using the Integrated Composite Analyzer (ICAN) in conjunction with Monte Carlo simulation and Fast Probability Integration (FPI) techniques. Probabilistic input included fiber and matrix properties, fiber misalignment, fiber volume ratio, void volume ratio, ply thickness and ply layup angle. Cumulative distribution functions (CDFs) for select laminate properties are given. To reduce the number of simulations, a Fast Probability Integration (FPI) technique was used to generate CDFs for the select properties in the absence of fiber misalignment. These CDFs were compared to a second Monte Carlo simulation done without fiber misalignment effects. It was found that FPI requires fewer simulations to obtain the cumulative distribution functions as opposed to Monte Carlo simulation techniques. Furthermore, FPI provides valuable information regarding the sensitivities of composite properties to the constituent properties, fiber volume ratio and void volume ratio.

Mase, G. T.↗
NASA NTRS1993

Petrologic constraints on the surface processes on asteroid 4 Vesta and on excavation depths of diogenite fragments

The eucrite-howardite-diogenite meteorite groups are though to be related by magmatic processes. Asteroid 4 Vesta has been proposed as the parent body for these basaltic achondrite meteorites. The similarity of the planetesimal's surface composition to eucrite and diogenite meteorites and the large size of the asteroid (r = 250 km) make it an attractive source, but its position in the asteroid belt far from the known resonances from which meteorites originate make a relation between Vesta and eucrite-howardite-giogenite group problematic. It has been proposed that diogenites are low-Ca pyroxene-rich cumulates that crystallized from a magnesian parent (identified in howardite breccias), and this crystallization process led to evolved eucrite derivative magmas. This eucrite-diogenite genetic relationship places constraints on the physical conditions under which crystallization occurred. Elevated pressure melting experiments on magnesian eucrite parent compositions show that the minimum pressure at which pyroxene crystallization could lead to the observed compositions of main series eucrites is 500 bars, equivalent to a depth of 135 km in a 4 Vesta-sized eucrite parent body. Therefore, the observation of diogenite on the surface of 4 Vesta requires a post-crystallization process that excavates diogenite cumulate from depth. The discovery of diogenite asteroidal fragments is consistent with an impact event on 4 Vesta that penetrated the deep interior of this planetesimal.

Grove, T. L.↗
NASA NTRS1993

Igneous fractionation and subsolidus equilibration of diogenite meteorites

Diogenites are coarse-grained orthopyroxenite breccias of remarkably uniform major element composition. Most diogenites contain homogeneous pyroxene fragments up to 5 cm across of Wo2En74Fs24 composition. Common minor constituents are chromite, olivine, trolite and metal, while silica, plagioclase, merrillite and diopside are trace phases. Diogenites are generally believed to be cumulates from the eucrite parent body, although their relationship with eucrites remains obscure. It has been suggested that some diogenites are residues after partial melting. I have performed EMPA and INAA for major, minor and trace elements on most diogenites, concentrating on coarse-grained mineral and lithic clasts in order to elucidate their igneous formation and subsequent metamorphic history. Major element compositions of diogenites are decoupled from minor and trace element compositions; the latter record an igneous fractionation sequence that is not preserved in the former. Low equilibration temperatures indicate that major element diffusion continued long after crystallization. Diffusion coefficients for trivalent and tetravalent elements in pyroxene are lower than those of divalent elements. Therefore, major element compositions of diogenites may represent means of unknown portions of a cumulate homogenized by diffusion, while minor and trace elements still yield information on their igneous history. The scale of major element equilibration is unknown, but is likely to be on the order of a few cm. Therefore, the diogenite precursors may have consisted largely of cm-sized, igneously zoned orthopyroxene grains, which were subsequently annealed during slow cooling, obliterating major element zoning but preserving minor and trace incompatible element zoning.

Mittlefehldt, David W.↗
NASA NTRS1993

Petrogenesis of Apollo 12 mare basalts. Part 1: Multiple melts and fractional crystallization to explain olivine and ilmenite basalt compositions

Mare basalts returned by the Apollo 12 mission have been divided into 4 groups on the basis of mineralogy and whole-rock chemistry: olivine basalts; pigeonite basalts; ilmenite basalts; and feldspathic basalts. James and Wright and Rhodes et al. concluded that the olivine and pigeonite groups were co-magmatic and that the within group variations are due to fractional crystallization of olivine and minor Cr-spinel, with pigeonite replacing olivine in the pigeonite basalts. Rhodes et al. concluded that the parental compositions for these suites were probably represented by the vitrophyres, and the olivine basalts are comprised essentially of cumulates and the pigeonites of evolved end-members. However, Neal et al. have demonstrated, using trace-element considerations, that the Apollo 12 olivine and pigeonite suites are not related. The ilmenite basalts were studied extensively by Dungan and Brown who noted that both cumulates and evolved fractionates were present within this group. In their modeling, Dungan and Brown used the vitrophyre compositions as parents. Neal et al. demonstrated that the feldspathic suite was probably comprised of only one member - 12038. Herein, the ilmenite and olivine basalts are demonstrated to be the products of several non-modal partial melting events of a single source followed by closed-system fractional crystallization.

Neal, Clive R.↗
NASA NTRS1993

U-Pb isotopic ages and characteristics of ancient (greater than 4.0 Ga) lunar highland rocks

A review of the present (and certainly sparse) U-Pb isotopic database for ancient (greater than 4.0 Ga) lunar highland rocks indicates that both early-forming anorthosites and high-Mg suite rocks were formed from sources with a wide variety of U-238/Pb-204(mu) values as early as 4.44 Ga. The U-Pb data from Apollo 16 anorthosites 67075, 60025, and 62337 indicate source-mu values between approximately 55 and approximately 350; whereas values for high-Mg suite rocks are tentatively considered to be over 500, similar to KREEP sources. At present, I interpret the data to indicate that either early cumulates were formed slowly in a magma environment that allowed isotopic reequilibration or mixing over a long period of crystallization, or these cumulates formed from rapidly-evolving (both geochemically and isotopically) residual liquids. It is possible that an early bombardment period played a role in the mixing process.

Premo, W. R.↗
NASA NTRS1993

Orthopyroxenes as recorders of diogenite petrogenesis: Trace element systematics

Eucrite, howardite, and diogenite members of the achondrites are considered, by many, to be genetically related. Therefore, each provide a piece of the puzzle for reconstructing magmatic processes on the eucrite parent body (EPB). The relationship between eucrites and diogenites can be viewed within the context of two distinctly different models: (1) fractional crystallization; and (2) partial melting. In fractional crystallization models, eucrites and diogenites represent a complementary continuum of planetary fractional crystallization products in which the diogenites represent crystal accumulations during the crystallization of eucritic magmas at shallow to deep levels in the EPB. Alternatively, experimental studies may be interpreted as indicating eucrites represent peritectic partial melts of a primitive, chondritic EPB mantle. Within this type of model, the diogenites are also generally considered to be cumulates; however, their petrogenetic relationship to the eucrites is less clear. Sack et al. proposed that the olivine diogenites represent residua from the partial melting events that produced eucritic liquids. Initial trace element studies of orthopyroxene (OPX) are consistent with this model. However, this trace element modeling of the olivine diogenites is nonunique. As a further test of these models, we did the following three things: (1) analyzed OPX from cumulate diogenites to compare with the olibine diogenite data; (2) improved ion microprobe analytical techniques for the analysis of elements critical to our interpretations; and (3) selected more relevant Kd's for OPX-eucritic melt.

Shearer, C. K.↗
NASA NTRS1993

Origin of high-Ti lunar ultramafic glasses

A series of high pressure melting experiments were performed on a synthetic analog of the Apollo 14 Black Glass. At 15 kb and 1400 C, olivine is the liquidus phase. At 25 kb and 1450 C, orthopyroxene and Cr-spinel crystallize. A multiple saturation point with olivine + orthopyroxene + spinel on the liquidus occurs at 20 kb and 1440 C. It was proposed that the high-Ti ultramafic glass evolved from a low-Ti Green Glass generated deep in the lunar interior that assimilated shallow-level, late stage cumulates of magma ocean differentiation. Heat for assimilation is provided by superheat of the low-Ti magma and melts high-Ca pyroxene and ilmenite cumulates at a depth of 100 km. This model is a variant of that proposed by Hubbard and Minear and rejected by Ringwood and Kesson.

Wagner, T. P.↗
NASA NTRS1993

Lunar mare volcanism: Mixing of distinct, mantle source regions with KREEP-like component

Mare basalts comprise less than 1% of the lunar crust, but they constitute our primary source of information on the moon's upper mantle. Compositional variations between mare basalt suites reflect variations in the mineralogical and geochemical composition of the lunar mantle which formed during early lunar differentiation (4.5-4.4 AE). Three broad suites of mare basalt are recognized: very low-Ti (VLT) basalts with TiO2 less than 1 wt%, low-Ti basalts with TiO2 = 2-4 wt%, and high-Ti basalts with TiO2 = 10-14 wt%. Important subgroups include the Apollo 12 ilmenite basalts (TiO2 = 5-6 wt%), aluminous low-Ti mare basalts (TiO2 = 2-4 wt%, Al2O3 = 10-14 wt%), and the newly discovered Very High potassium (VHK) aluminous low-Ti basalts, with K2O = 0.4-1.5 wt%. The mare basalt source region has geochemical characteristics complementary to the highlands crust and is generally thought to consist of mafic cumulates from the magma ocean which formed the felsic crust by feldspar flotation. The progressive enrichment of mare basalts in Fe/Mg, alkalis, and incompatible trace elements in the sequence VLT basalt yields low-Ti basalt yields high-Ti basalt is explained by the remelting of mafic cumulates formed at progressively shallower depths in the evolving magma ocean. This model is also consistent with the observed decrease in compatible element concentrations and the progressive increase in negative Eu anomalies.

Shervais, John W.↗
NASA NTRS1994

Direct simulation Monte Carlo prediction of on-orbit contaminant deposit levels for HALOE

A three-dimensional version of the direct simulation Monte Carlo method is adapted to assess the contamination environment surrounding a highly detailed model of the Upper Atmosphere Research Satellite. Emphasis is placed on simulating a realistic, worst-case set of flow field and surface conditions and geometric orientations for the satellite in order to estimate an upper limit for the cumulative level of volatile organic molecular deposits at the aperture of the Halogen Occultation Experiment. A detailed description of the adaptation of this solution method to the study of the satellite's environment is also presented. Results pertaining to the satellite's environment are presented regarding contaminant cloud structure, cloud composition, and statistics of simulated molecules impinging on the target surface, along with data related to code performance. Using procedures developed in standard contamination analyses, along with many worst-case assumptions, the cumulative upper-limit level of volatile organic deposits on HALOE's aperture over the instrument's 35-month nominal data collection period is estimated at about 13,350 A.

Woronowicz, Michael S.↗
NASA NTRS1995

Noise impact of advanced high lift systems

The impact of advanced high lift systems on aircraft size, performance, direct operating cost and noise were evaluated for short-to-medium and medium-to-long range aircraft with high bypass ratio and very high bypass ratio engines. The benefit of advanced high lift systems in reducing noise was found to be less than 1 effective-perceived-noise decibel level (EPNdB) when the aircraft were sized to minimize takeoff gross weight. These aircraft did, however, have smaller wings and lower engine thrusts for the same mission than aircraft with conventional high lift systems. When the advanced high lift system was implemented without reducing wing size and simultaneously using lower flap angles that provide higher L/D at approach a cumulative noise reduction of as much as 4 EPNdB was obtained. Comparison of aircraft configurations that have similar approach speeds showed cumulative noise reduction of 2.6 EPNdB that is purely the result of incorporating advanced high lift system in the aircraft design.

Elmer, Kevin R.↗
NASA NTRS1994

Comparison of SBUV and SAGE II ozone profiles: Implications for ozone trends

Solar backscattered ultraviolet (SBUV) ozone profiles have been compared with Stratospheric Aerosol and Gas Experiment (SAGE) II profiles over the period October 1984 through June 1990, when data are available from both instruments. SBUV measurements were selected to closely match the SAGE II latitude/longitude measurement pattern. There are significant differences between the SAGE II sunrise and the sunset zonal mean ozone profiles in the equatorial zone, particularly in the upper stratosphere, that may be connected with extreme SAGE II solar azimuth angles for tropical sunrise measurements. Calculation of the average sunset bias between SBUV and SAGE II ozone profiles shows that allowing for diurnal variation in Umkehr layer 10, SBUV and SAGE II agree to within +/- 5% for the entire stratosphere in the northern midlatitude zone. The worst agreement is seen at southern midlatitudes near the ozone peak (disagreements of +/- 10%), apparently the result of the SBUV ozone profile peaking at a lower altitude than SAGE. The integrated ozone columns (cumulative above 15 km) agree very well, to within +/- 2.3% in all zones for both sunset and sunrise measurements. A comparison of the time dependence of SBUV and SAGE II shows that there was less than +/- 5% relative drift over the 5.5 years for all altitudes except below 25 km, where the SBUV vertical resolution is poor. The best agreement with SAGE is seen in the integrated column ozone (cumulative above 15 km), where SAGE II has a 1% negative trend relative to SBUV over the comparison period. There is a persistent disagreement of the two instruments in Umkehr layers 9 and 10 of +/- 4% over the 5.5-year comparison period. In the equatorial zone this disagreement may be caused in part by a large positive trend (0.8 K per year) in the National Meteorologica Center temperatures used to convert the SAGE II measurement of ozone density versus altitude to a pressure scale for comparison with SBUV. In the middle stratosphere (30-40 km), SBUV shows a 2-4% negative drift relative to SAGE II. If the actual ozone trends are considered, SBUV and SAGE II agree in showing little ozone change (less than 2%) between 1984 and 1990, except in layer 3 where SAGE II measures a large ozone decrease. But over 11 years, SBUV measured a 7% per decade ozone decrease between 40 and 50 km, decreasing in magnitude at lower altitudes, in good agreement with 11-year trends derived from the average of 5 Umkehr stations.

Mcpeters, R. D.↗
NASA NTRS1994

Orthopyroxene as a recorder of lunar crust evolution: An ion microprobe investigations of Mg-suite norites

The lunar Mg suite, which includes dunites, troctolites, and norites, could make up 20-30% of the Moon's crust down to a depth of 60 km. The remainder is largely anorthositic. This report focuses on norites because we have found that the chemical characteristics of orthopyroxene are effective recorders of their parental melt compositions. Many of the samples representing the Mg suite are small and unrepresentative. In addition, they are cumulates and thus are difficult to study by whole-rock techniques. Therefore, we decided to study these rocks by SIMS techniques to analyze a suite of trace elements in orthopyroxene. The 12 norite samples were selected from a recent compilation by Warren who attempted to select the best candidate samples from the standpoint of their pristine character. Our present database includes greater than 300 superior Electromagnetic Pulse (EMP) analyses and greater than 50 scanning ion mass spectroscopy (SIMS) analyses for 8 Rare Earth Elements (REE), Zr, Y, and Sr. The Mg#s for the parental melts calculated from Mg#s in orthopyroxene show that most melts have Mg#s in the range of 0.36-0.60. This compares with a range of Mg#s for lunar volcanic picritic glass beads of 0.4-0.68. Therefore, although the cumulate whole-rock compositions of the Mg suite can be extremely magnesian, the calculated parental melts are not anomalously high in Mg. A chemical characteristic of the Mg-suite norites that is more difficult to explain is the high KREEP content of the calculated parental melts. The REE contents for the calculated norite parental melts have REE that match or exceed the high-K KREEP component of Warren. Therefore, mixing of a KREEP component and a picritic melt cannot, by itself, explain the high estimated REE contents of the melts parental to norites. Advanced crystallization following KREEP incorporation, especially of plagiclase, may also be required.

Papike, J. J.↗